dando watertec 6 (dando drilling indonesia)
TRANSCRIPT
Dando Drilling International
The Dando Watertec 6 is a versatile compactstrong rig capable of drilling water wells in excess
of 200m deep. With various mounting options thisexceptional rig is very popular across the world.
Dando Watertec 6waterwell mountingoptions
onboardmud/flush pump
Watertec 6 Rotary Drill Rig
Dando Drilling International [email protected]
tel: +44 (0)1903 731312fax: +44 (0)1903 730305
* Based on 80% of drill string weight in dry hole
Please note: All figures and claims made here are indicative and Dando Drilling Internationalreserves the right to make alterations to specification detail without notice. All images are forreference only and may not represent the exact specification outlined in this document.
Drilling Rig SpecificationCarrier Options Heavy duty commercial 4 x 4 truck - Crawler mounted - Trailer mounted -
Mounted on customer own support vehicle/structure
Deck Engine VM Sun 80 HP diesel engine standard, other options available
Mast Dimensions Working mast height Working mast using theusing main winch: 5200mm rotary head: 4500mm
Rig Capacity Pullback: 6000kgs Pulldown: 3250kgs Hook load (max): 6000kgs
Rotary Head Standard Rotation (max) 192rpm Torque (max) 4050NmPerformance Other options available
Rotary head tilt and side shift
Drill Table and As standard - Box type drill table with removable drill rod and Other options Break Out System casing guides. Break out system is a double acting hydraulic available
cylinder with adjustable wrench
Main Winch Maximum single line pull: Maximum speed: Drum capacity: 2040kgs 41m/minute 57m of 10mm wire rope
Tool Handling Maximum single line pull: Maximum speed: Drum capacity:Winch 1326kgs 15m/minute 30m of 8mm wire rope
Mud Pump Standard: Hydraulically driven Maximum flow rate: (150gpm) 568 litres/minute5" x 6" duplex mud pump Maximum discharge pressure: 310psi
Foam Pump Standard: Hydraulically Maximum flow rate: 34 litres/minutedriven triplex pump Maximum discharge pressure: 500psi
Inline Oil Lubricator Fitted as standard and used when operating a DTH hammer
Hydraulic System Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves
Drillers Control Panel Uncomplicated and user friendly with ergonomic layout
Rod Spin Safety Various options availableGuard
Levelling Jacks Two front and two rear jacks with individual locking valves
Lighting and Rig is provided with mast and control panel lighting and the electrical system Electrical System is 12 volt
Drilling Capacities* 31/2" (13.5kgs/m) drill rod = 356m
41/2" (23kgs/m) drill rod = 209m
Optional Equipment RC Drilling Conversion Kit - For light duty reverse circulation drilling applications
Centrifugal Mud Pump - Supply to customers specification
Other options available on request