data sheet specifications & performance · ec-type certificate models equipped with wetted...
TRANSCRIPT
www.sandpiperpump.com
Model S30 Metallic Design Level 1
Quality SystemISO9001 Certified
Environmental Management System ISO14001 Certified
Certified Quality
Warren Rupp, Inc.A Unit of IDEX Corporation
800 N. Main St., Mansfield, Ohio 44902 USA
Telephone 419.524.8388Fax 419.522.7867
www.SAndpiperpUMp.cOM
© copyright 2013 warren rupp, inc.All rights reserved
DATA SHEETSpecifications & Performance
s30mdl1ds-rev0413
www.sandpiperpump.com1 • Model S30 Metallic
Explanation of Pump Nomenclature
ATEX Detail
Non-Wetted Material Options A Painted Aluminum I Cast Iron J Painted Aluminum w/PTFE Coated Hardware S Stainless Steel with Stainless Steel Hardware Y Painted Aluminum with Stainless Steel Hardware Z Cast Iron with Stainless Steel Hardware
Porting Options A 150# Raised Face 3" ANSI Flange (Integral Manifold) D 80 DIN Flange (Integral Manifold) N NPT Threads B BSP (Tapered) Threads
Pump Style S Standard
Muffler Options 0 None 1 SoundDampeningMuffler 2 MeshMuffler 3 High temperature Air Valve w/IntegralMuffler 4 High temperature Air Valve w/SoundDampeningMuffler 5 High temperature Air Valve w/MeshMuffler 6 MetalMuffler 7 Metal Mufflerw/GroundingCable
Pump Brand S SANDPIPER®
Pump Size 30 3"
Check Valve Type B Ball
Design Level 1 Design Level
Wetted Material A Aluminum I Cast Iron S Stainless Steel H Alloy C X Unpainted Aluminum
Diaphragm/Check Valve Materials 1 Santoprene/Santoprene 2 PTFE-Santoprene/PTFE B Nitrile/Nitrile C FKM/PTFE E EPDM/EPDM I EPDM/Santoprene G PTFE-Neoprene/PTFE M Santoprene/PTFE N Neoprene/Neoprene
Check Valve Seat A Aluminum B Nitrile C CarbonSteel E EPDM N Neoprene S Stainless Steel T PTFE V FKM W UHMW Polyethylene
A1. Solenoid Kit with 12 VDC ATEX Compliant Coil A2. Solenoid Kit with 24 VDC ATEX Compliant Coil A3. Solenoid Kit with 110/120 VAC 50/60 Hz ATEX Compliant Coil A4. Solenoid Kit with 220/240 VAC 50/60 Hz ATEX Compliant Coil
Pump Options 00. None P0. 10.30VDC Pulse Output Kit P1. Intrinsically-Safe 5.30VDC, 110/120VAC 220/240 VAC Pulse Output Kit P2. 110/120 or 220/240VAC Pulse Output Kit E0. Solenoid Kit with 24VDC Coil E1. Solenoid Kit with 24VDC Explosion-Proof Coil E2. Solenoid Kit with 24VAC/12VDC Coil E3. Solenoid Kit with 12VDC Explosion-Proof Coil E4. Solenoid Kit with 110VAC Coil E5. Solenoid Kit with 110VAC Explosion-Proof Coil E6. Solenoid Kit with 220VAC Coil E7. Solenoid Kit with 220VAC Explosion-Proof Coil E8. Solenoid Kit with 110VAC, 50 Hz Explosion-Proof Coil E9. Solenoid Kit with 230VAC, 50 Hz Explosion-Proof Coil SP. Stroke Indicator Pins
Your Serial #: (fill in from pump nameplate) _____________________________________
pump pump check design wetted diaphragm/ check Valve non-wetted porting pump Muffler pump Brand Size Valve Level Material check Valve Seat Material Options Style Options Options
S XX X X X X X X X X X XXModel #:
S __ ____ __ __ __ __ __ __ __ __ __ ____(fill in from pump nameplate)
Your Model #:
IEC EEX m T4
Note: Pump models equipped with these explosion-proof solenoid kit options E1, E3, E5, E7, E8 or E9, are certified and approved by the above agencies. They are NOT ATEX compliant.
(4)
II 2GD T5(1) II1GcT5II3/1GcT5II 1D c T100°CI M1 cI M2 c
II2GcT5II3/2GcT5II 2D c T100°C
Models equipped with Wetted Options I, S or H, Non-Wetted Options I, S or Z, Pump Options 6 or 7, and Kit Option 0. Note: See ATEX Explanation of EC-Type Certificate
Models equipped with Wetted Options A, I, S, or H, Non-Wetted Options A, I, S, Y, or Z, Pump Options 6 or 7, and Kit Option 0.Note: See ATEX Explanation of Type Examination Certificate
Note: Pumps ordered with the options listed in (1) to the left are ATEX compliant when ordered with kit option P1.
II 2G Ex ia c IIC T5II 2D c iaD 20 IP67 T100˚C
(2) II2GExiacIICT5II3/2GExiacIICT5II 2D Ex c ia 20 IP67 T100°C
*Note: See page 19 for Special Conditions For Safe Use.
Note: Pumps ordered with the options listed in (1) to the left are ATEX compliant when ordered with kit option A1, A2, A3 or A4. Compressed Air Temperature Range: Maximum Ambient Temperature to plus 50°C.
II 2G EEx m c T5II 2D c IP65 T100°C
(3) II2GEExmcIIT5II3/22GEExmcIIT5II 2D c IP65 T100°C
MODEL SPECIFIC
s30mdl1ds-rev0413
www.sandpiperpump.com Model S30 Metallic • 2
PerformanceS30 METALLiC
SUcTiOn/diSchArge pOrT Size• 3" NPT or 3" BSP Tapered• 3" ANSI Flange or 3" DIN Flange
CApACIty• 0 to 235 gallons per minute (0 to 889 liters per minute)
Air diSTriBUTiOn VALVe• No-lube, no-stall design
SOLidS-hAndLing• Up to .38 in. (9.65mm)
heAdS Up TO• 125 psi or 289 ft. of water (8.6 Kg/cm2 or 86 meters)
diSpLAceMenT/STrOke• .94 Gallon / 3.56 liter
MAxiMUM OperATing preSSUre• 125 psi (8.6 bar)
Shipping weighT• Aluminum 116 lbs. (53kg)• Cast Iron 215 lbs. (98kg)• Stainless Steel 194 lbs. (87kg)
ATEX Detail
10020(34) 40(68)
60(102)80(136)
100(170)
80
60
40
20
00
1
2
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200
9008007006005004003002001000
220 240
120(204)
140(238)
30
2025
1015
5
9.1
67.6
34.5
1.5
CAPACITYLiters per minute
BAR
PSI
HEA
D
U.S. Gallons per minute
100 PSI (6.8 Bar)
60 PSI (4.08 Bar)
20 PSI (1.36 Bar) Air Inlet Pressure
40 PSI (2.72 Bar)
NPS
HR
MET
ERS
FEET
MODEL S30 Metallic Performance CurvePerformance based on the following: elastomer fitted pump, flooded suction, water at ambient conditions.
The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%.
80 PSI (5.44 Bar)
MaterialsMaterial profile: Operating
Temperatures:Max. Min.
conductive Acetal: Tough, impact resistant, ductile. Good abrasion resistance and low friction surface. Generally inert, with good chemical resistance except for strong acids and oxidizing agents.
190°F88°C
-20°F-29°C
epdM: Shows very good water and chemical resistance. Has poor resistance to oils and solvents, but is fair in ketones and alcohols.
280°F138°C
-40°F-40°C
FkM: (Fluorocarbon) Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 70°F(21°C)) will attack FKM.
350°F177°C
-40°F-40°C
hytrel®: Good on acids, bases, amines and glycols at room temperatures only.
220°F104°C
-20°F-29°C
neoprene: All purpose. Resistance to vegetable oils. Generally not affected by moderate chemicals, fats, greases and many oils and solvents. Generally attacked by strong oxidizing acids, ketones, esters and nitro hydrocarbons and chlorinated aromatic hydrocarbons.
200°F93°C
-10°F-23°C
nitrile: General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used with highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.
190°F88°C
-10°F-23°C
nylon: 6/6 High strength and toughness over a wide temperature range. Moderate to good resistance to fuels, oils and chemicals.
180°F82°C
32°F0°C
polypropylene: A thermoplastic polymer. Moderate tensile and flex strength. Resists stong acids and alkali. Attacked by chlorine, fuming nitric acid and other strong oxidizing agents.
180°F82°C
32°F0°C
pVdF: (Polyvinylidene Fluoride) A durable fluoroplastic with excellent chemical resistance. Excellent for UV applications. High tensile strength and impact resistance.
250°F121°C
0°F-18°C
Santoprene®: Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance.
275°F135°C
-40°F-40°C
UhMw pe: A thermoplastic that is highly resistant to a broad range of chemicals. Exhibits outstanding abrasion and impact resistance, along with environmental stress-cracking resistance.
180°F82°C
-35°F-37°C
Urethane: Shows good resistance to abrasives. Has poor resistance to most solvents and oils.
150°F66°C
32°F0°C
Virgin pTFe: (PFA/TFE) Chemically inert, virtually impervious. Very few chemicals are known to chemically react with PTFE; molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures.
220°F104°C
-35°F-37°C
Maximum and Minimum Temperatures are the limits for which these materials can be operated. Temperatures coupled with pressure affect the longevity of diaphragm pump components. Maximum life should not be expected at the extreme limits of the temperature ranges.
Metals:Alloy c: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.Stainless Steel: Equal to or exceeding ASTM specification A743 CF-8M for corrosion resistant iron chromium, iron chromium nickel and nickel based alloy castings for general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
Forspecificapplications,alwaysconsulttheChemicalResistanceChart.
CAUTION! Operating temperature limitations are as follows:
Ambient temperature range: -20°C to +40°C process temperature range: -20°C to +80°C for models rated as category 1 equipment -20°C to +100°C for models rated as category 2 equipmentIn addition, the ambient temperature range and the process temperature range do not exceed the operating temperature range of the applied non-metallic parts as listed in the manuals of the pumps.
MODEL SPECIFIC UNIVERSAL ALL AODD
s30mdl1ds-rev0413
www.sandpiperpump.com3 • Model S30 Metallic
FRONT VIEW
BOTTOM VIEW
SIDE VIEW
PUMP WEIGHT: 273 lbs
CENTER OF GRAVITY
SUCTION PORT3” RF ANSI STYLE (#150) FLANGE
3/4 4 HOLES EQUALLY SPACEDON A 6 BOLT CIRCLE
DIN FLANGE CONFIGURATION80 DIN (10 BAR) FLANGE
19MM 8 HOLES EQUALLY SPACEDON A 160MM BOLT CIRCLE
SUCTION PORT3” RF ANSI STYLE (#150) FLANGE3/4 4 HOLES EQUALLY SPACEDON A 6 BOLT CIRCLE
DIN FLANGE CONFIGURATION80 DIN (10 BAR) FLANGE19MM 8 HOLES EQUALLY SPACEDON A 160MM BOLT CIRCLE
1” NPT EXHAUST PORTFOR OPTIONAL PIPING EXHAUSTAIR IN SUBMERGED APPLICATIONS
AIR INLET3/4” NPT
DIMENSIONSTANDARD PUMPPULSE OUTPUT
METAL MUFFLERMESH MUFFLER
SOUND DAMPENING MUFFLER
A15 3/4 / (400MM)16 1/32 / (407MM)16 3/4 / (429MM)17 3/16 / (441MM)17 3/16 / (441MM)
S30 Metallic, Flanged Ports Dimensional Tolerance:±1/8" Dimensional Tolerance:± 3mm
Dimensional Drawings
s30mdl1ds-rev0413
www.sandpiperpump.com Model S30 Metallic • 4
D
E
A
B
C
STANDARDINTEGRAL MUFFLER
1" NPT EXHAUST PORTFOR OPTIONAL MUFFLER
STYLES OR PIPING EXHAUSTAIR IN SUBMERGED
APPLICATIONS.
SUCTION PORT3" NPT TAP
DISCHARGE PORT3" NPT TAP
AIR INLET3/4” NPT
BOTH SUCTION ANDDISCHARGE PORTS AREAVAILABLE WITH3" BSP TAPERED THREADS
BOTTOM VIEW
FRONT VIEW
SIDE VIEW
Pulse Output KitAluminum
SoundDampeningMuffler
IntegralMuffler
Stainless Steel
MetalMuffler
DIMENSION B C D E15 3/415 3/4
29 31/32 2 11/32 17 9/64 32 1/1630 3/16 2 9/16 17 23/64 32 9/32
MeshMuffler 17 3/1617 3/1616 3/4
A
E
D
C
B
A
STANDARDINTEGRAL MUFFLER
3" NPT EXHAUST PORTFOR OPTIONAL MUFFLER
STYLES OR PIPING EXHAUSTAIR IN SUBMERGED
APPLICATIONS.
SUCTION PORT3" NPT TAP
DISCHARGE PORT3" NPT TAP
AIR INLET3/4” NPT
BOTH SUCTION ANDDISCHARGE PORTS AREAVAILABLE WITH3" BSP TAPERED THREADS
BOTTOM VIEW
FRONT VIEW
SIDE VIEW
Pulse Output KitAluminum
SoundDampeningMuffler
IntegralMuffler
Stainless Steel
MetalMuffler
DIMENSION B C D E400400
761 60 435 815767 66 441 821
MeshMuffler 437437425
A
S30 Metallic, Threaded Ports Dimensions in Millimeters. Dimensional Tolerance:± 3mm
S30 Metallic, Threaded Ports Dimensions in Inches. Dimensional Tolerance:±1/8"
Dimensional Drawings
MODEL SPECIFIC
Declaration of Conformity
Signature of authorized person Date of issue
Printed name of authorized person
Revision Level: F
TitleDavid Roseberry Engineering Manager
October 20, 2005
Date of revisionAugust 23, 2012
Manufacturer: Warren Rupp, Inc.®, 800 N. Main Street, P.O. Box 1568,Mansfield, Ohio, 44901-1568 USA
Certifies that Air-Operated Double Diaphragm Pump Series: HDB, HDF, M Non-Metallic, S Non-Metallic, M Metallic, S Metallic, T Series, G Series, U Series, EH and SH High Pressure,
RS Series, W Series, SMA and SPA Submersibles, and Tranquilizer Surge Suppressors comply with the European Community Directive 2006/42/EC on Machinery, according to Annex VIII.
This product has used Harmonized Standard EN809:1998+A1:2009, Pumps and Pump Units for Liquids - Common Safety Requirements, to verify conformance.
Written Warranty5 - YEAR Limited Product Warranty
Quality System ISO9001 Certified • Environmental Management Systems ISO14001 Certified
Warren Rupp, Inc. (“Warren Rupp”) warrants to the original end-use purchaser that no product sold byWarren Rupp that bears a Warren Rupp brand shall fail under normal use and service due to a defect in material
or workmanship within five years from the date of shipment from Warren Rupp’s factory. Warren Rupp brandsinclude SANDPIPER®, MARATHON®, PortaPump®, SludgeMaster™ and Tranquilizer®.
~ See complete warranty at www. sandpiperpump.com/About/guaranteesandwarranties.html ~
UNIVERSAL ALL SP
EC Declaration of ConformityIn accordance with ATEX Directive 94/9/EC,
Equipment intended for use in potentially explosive environments.
Applicable Standard:EN13463-1: 2001,EN13463-5: 2003
David Roseberry, Engineering ManagerDATE/APPROVAL/TITLE:27 MAY 2010
EN 60079-25: 2004For pumps equipped with Pulse Output ATEX OptionKEMA Quality B.V. (0344)
AODD Pumps and Surge SuppressorsFor Type Examination Designations
AODD (Air-Operated Double Diaphragm) PumpsEC Type Examination Certificate No. Pumps: KEMA 09ATEX0071 XKEMA Quality B.V.Utrechtseweg 3106812 AR Arnhem, The Netherlands
Manufacturer: Warren Rupp, Inc.®, A Unit of IDEX Corportion800 North Main Street, P.O. Box 1568, Mansfield, OH 44901-1568 USA
EC Declaration of ConformityATEX Summary of Markings
Type Marking Listed In Non-Conductive Fluids
EC Type Certificate No. Pumps: KEMA 09ATEX0071 X Type Certificate No. Pumps: KEMA 09ATEX0072 X Type Certificate No. Suppressors: KEMA 09ATEX0073
Pump types, S1F, S15, S20, and S30 provided with the pulse output option
II 2 G Ex ia c IIC T5II 3/2 G Ex ia c IIC T5II 2 D Ex c iaD 20 IP67 T100oC
KEMA 09ATEX0071 XKEMA 09ATEX0071 XKEMA 09ATEX0071 X
NoYesYes
KEMA 09ATEX0071 XCE 0344
Surge Suppressors all types II 2 G T5II 3/2 G T5II 2 D T100oC
KEMA 09ATEX0073KEMA 09ATEX0073KEMA 09ATEX0073
NoYesYes
KEMA 09ATEX0073CE
Pump types, S1F, S15, S20, and S30 provided with the integral solenoid option
II 2 G EEx m c II T5II 3/2 G EEx m c II T5II 2 D c IP65 T100oC
KEMA 09ATEX0071 XKEMA 09ATEX0071 XKEMA 09ATEX0071 X
NoYesYes
KEMA 09ATEX0071 XCE 0344
Pump types, HDB1½, HDB40, HDB2, HDB50, HDB3, HDF1, HDF25, HDF2, HDF3M, PB¼, S05, S1F, S15, S20, S30, SB1, SB25, ST1½, ST40, G15, G20, and G30, without the above listed options, no aluminum parts
II 1 G c T5II 3/1 G c T5II 1 D c T100oCI M1 cI M2 c
KEMA 09ATEX0071 XKEMA 09ATEX0071 XKEMA 09ATEX0071 XKEMA 09ATEX0071 XKEMA 09ATEX0072 X
NoYesYesNoYes
KEMA 09ATEX0071 XKEMA 09ATEX0072 XCE 0344
Pump types, DMF2, DMF3, HDB1½, HDB40, HDB2, HDB50, HDB3, HDF1, HDF25, HDF2, HDF3M, PB¼, S05, S1F, S15, S20, S30, SB1, SB25, SE½, ST1, ST25, ST1½, ST40, U1F, G05, G1F, G15, G20, and G30
II 2 G c T5II 3/2 G c T5II 2 D c T100oC
KEMA 09ATEX0072 XKEMA 09ATEX0072 XKEMA 09ATEX0072 X
NoYesYes
KEMA 09ATEX0072 XCE
EC Declaration of Conformity In accordance with ATEX Directive 94/9/EC, Equipment intended for use in potentially explosive environments.
Applicable Standard:EN13463-1: 2001,EN13463-5: 2003
David Roseberry, Engineering ManagerDATE/APPROVAL/TITLE:27 MAY 2010
EN 60079-25: 2004For pumps equipped with Pulse Output ATEX OptionKEMA Quality B.V. (0344)
AODD Pumps and Surge SuppressorsFor Type Examination Designations, see page 2 (back)
AODD (Air-Operated Double Diaphragm) PumpsEC Type Examination Certificate No. Pumps: KEMA 09ATEX0071 XKEMA Quality B.V.Utrechtseweg 3106812 AR Arnhem, The Netherlands
Manufacturer: Warren Rupp, Inc.®, A Unit of IDEX Corportion800 North Main Street, P.O. Box 1568, Mansfield, OH 44901-1568 USA
UNIVERSAL ALL SP
s30nmdl2ds-REV0911 ModelS30Non-MetallicPage1
INTAKE/DISCHARGE PIPE SIZE3"ANSIFlangeor80mmDINFlange
CAPACITY0to238gallonsperminute(0to901litersperminute)
AIR VALVENo-lube,no-stall
design
SOLIDS-HANDLINGUpto.71in.(18mm)
HEADS UP TO100psior231ft.ofwater
(7baror70meters)
DISPLACEMENT/STROKE.9Gallon/3.41liter
0 20 40 60 80 100 120 140 160 180 200 220
85075065055045035025015050
100
90
80
70
60
50
40
30
20
10
0
1
2
3
4
5
6
7
0
30
2025
1015
5
9.1
67.6
34.5
1.5
20 (34)40 (68)
60 (102)80 (136)
100 (170)
120 (204)
140 (238)
CAPACITY
U.S. Gallons per minute
Liters per minute
BAR
PSI
HEA
D
NPS
HR
MET
ERS
FEET
MODEL S30 Non-Metallic Performance CurvePerformance based on the following: elastomer fitted pump, flooded suction, water at ambient conditions.
The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%.
40 PSI (2.72 Bar)
20 PSI (1.36 Bar)
80 PSI (5.44 Bar)
Air Inlet Pressure
100 PSI(6.8 Bar)
60 PSI (4.08 Bar)
SANDPIPER® pumps are designed to be powered only by compressed air.
Quality SystemISO9001 Certified
Environmental Management System ISO14001 Certified
AirInletSideViewAirExhaustSideView
S30 Non-Metallic Ball ValveDesign Level 2
Air OperatedDouble Diaphragm Pump
ENGINEERING,PERFORMANCE&CONSTRUCTIONDATA
s30nmdl2ds-REV0911 ModelS30Non-MetallicPage2
Check Diaphragm/ Check Non-Wetted Shipping MoDel Pump Pump Valve Design Wetted CheckValve Valve Material Porting Pump Pump Kit Weight Brand Size Type level Material Materials Seat options options Style options options lbs.(kg)
S30B2P1PQAS000. S 30 B 2 P 1 P Q A S 0 00. 231(105)
S30B2P2PQAS000. S 30 B 2 P 2 P Q A S 0 00. 231(105)
S30B2K1KQAS000. S 30 B 2 K 1 K Q A S 0 00. 315(143)
S30B2K2KQAS000. S 30 B 2 K 2 K Q A S 0 00. 315(143)
S30B2P4PQAV000. S 30 B 2 P 4 P Q A V 0 00. 270(122)
S30B2K4KQAV000. S 30 B 2 K 4 K Q A V 0 00. 354(161)
S30 Non-Metallic · Design Level 2· Ball ValveExplanation of Pump Nomenclature
Pump Brand S=SANDPIPER®
Pump Size 30=3"
Check Valve Type B=Ball
Design Level2=DesignLevel2
Wetted MaterialK=PVDFP=Polypropylene
Diaphragm Check Valve Materials1= Santoprene/Santoprene2= PTFE-SantopreneBackup/PTFE3= PTFEPumping,PTFE-Santoprene BackupDriver/PTFE4= SantoprenePumping,Santoprene Driver/Santoprene
Check Valve SeatK=PVDFP=PolypropyleneU=Polyurethane/Polyurethane
Non-Wetted Material OptionsA=PaintedAluminumJ= PaintedAluminumPTFEQ=EpoxyCoatedAluminumK=PTFECoatedAluminumL= PTFECoatedAluminumwith PTFECoatedHardwareR=EpoxyCoatedAluminumwith PTFECoatedHardware
Porting OptionsA=ANSIFlangeD=DINFlange7= DualPorting(ANSI)8= TopDualPorting(ANSI)9= BottomDualPorting(ANSI)
Pump StyleD=SpillContainmentwithElectronic LeakDetection(110V)E=SpillContainmentwithElectronic LeakDetection(220V)M=SpillContainmentwithMechanical LeakDetectionS=StandardV=SpillContainmentwithVisual LeakDetection
Pump Options0= None1= SoundDampeningMuffler2= MeshMuffler3= HightemperatureAir Valvew/IntegralMuffler4= HightemperatureAir ValveSoundDampening Muffler5= Hightemperature AirValvew/MeshMuffler
Kit Options00.=NoneP0.=10-30VDC PulseOutputKitP1.=Intrinsically-Safe 5-30VDC,110/120VAC, 220/240VAC PulseOutputKitP2.=110/120or220/240VAC PulseOutputKitKit Options, ContinuedE0.=SolenoidKitwith 24VDCCoilE1.=SolenoidKitwith24VDC Explosion-ProofCoil
E2.=SolenoidKitwith 24VAC/12VDCCoilE3.=SolenoidKitwith12VDC Explosion-ProofCoilE4.=SolenoidKitwith110VACCoilE5.=SolenoidKitwith110VAC,60 HzExplosion-ProofCoilE6.=SolenoidKitwith220VACCoilE7.=SolenoidKitwith220VAC, 60HzExplosion-ProofCoilE8.=SolenoidKitwith110VAC,50 HzExplosion-ProofCoilE9.=SolenoidKitwith230VAC,50 HzExplosion-ProofCoilSP.=StrokeIndicatorPins
CAUTION!Operatingtemperaturelimitationsareasfollows:
Materials Operating Temperatures
Nitrile Generalpurpose,oil-resistant.Showsgoodsolvent,oil,waterandhydraulicfluidresistance.ShouldnotbeusedwithhighlypolarsolventslikeacetoneandMEK,ozone,chlorinatedhydrocarbonsandnitrohydrocarbons.
PVDFAdurablefluoroplasticwithexcellentchemicalresistance.ExcellentforUVapplications.Hightensilestrengthandimpactresistance.
NEOPRENEAllpurpose.Resistanttovegetableoils.Generallynotaffectedbymoderatechemicals,fats,greasesandmanyoilsandsolvents.Generallyattackedbystrongoxidizingacids,ketones,esters,nitrohydrocarbonsandchlorinatedaromatichydrocar-bons.
PTFE Chemicallyinert,virtuallyimpervious.VeryfewchemicalsareknowntoreactchemicallywithPTFE:moltenalkalimetals,turbulentliquidorgaseousfluorineandafewfluoro-chemicalssuchaschlorinetrifluorideoroxygendifluoridewhichreadilyliberatefreefluorineatelevatedtemperatures.FKM (Fluorocarbon)showsgoodresistancetoawiderangeofoilsandsolvents;especiallyallaliphatic,aromaticandhalogenatedhydrocarbons,acids,animalandvegetableoils.Hotwaterorhotaqueoussolutions(over70°F)willattackFKM.
Santoprene®Injectionmoldedthermoplasticelastomerwithnofabriclayer.Longmechanicalflexlife.Excel-lentabrasionresistance.
Polypropylene Athermoplasticpolymer.Moderatetensileandflexstrenght.Resistsstrongacidsandalkalie.Attackedbychlorine,fumingnitricacidandotherstrongoxidizingagents.
Maximum Minimum190°F -10°F88°C -23°C
250°F 0°F121°C -18°C 200°F -10°F93°C -23°C
220°F -35°F104°C -37°C
350°F -40°F177°C -40°C
275°F -40°F135°C -40°C
180°F 32°F82°C 0°C
Maximum and Minimum Temperatures are the limits for which these materials can be operated. Temperatures coupled with pressure affect the longevity of diaphragm pump components. Maximum life should not be expected at the extreme limits of the temperature ranges.
CAUTION:NonmetallicpumpsandplasticcomponentsarenotUVstabilized.Ultravioletradiationcandamagethesepartsandnegativelyaffectmaterialproperties.DonotexposetoUVlightforextendedperiodsoftime.
Forspecificapplications,alwaysconsulttheWarrenRupp“ChemicalResistanceChart”
s30nmdl2ds-REV0911 ModelS30Non-MetallicPage3
DISCHARGE PORT3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
MANIFOLD CANROTATE ±90ºFROM VERTICALCENTERLINE
BOLT PATTERN ISSYMMETRICAL ABOUT
CENTERLINES
3/4” TYP.8 PLACES
BOTTOM VIEW
SIDE VIEW
FRONT VIEW
SUCTION PORT3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
STANDARD INTEGRAL MUFFLER:1” NPT EXHAUST PORT
FOR OPTIONAL MUFFLERSTYLES OR PIPING EXHAUST
AIR IN SUBMERGED APPLICATIONS
AIR INLET3/4” NPT
DISCHARGE PORT3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
MANIFOLD CANROTATE ±90ºFROM VERTICALCENTERLINE
BOLT PATTERN ISSYMMETRICAL ABOUT
CENTERLINES
AIR INLET3/4” NPT BOTTOM VIEW
SIDE VIEW
FRONT VIEW
SUCTION PORT3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
STANDARD INTEGRAL MUFFLER:1” NPT EXHAUST PORT
FOR OPTIONAL MUFFLERSTYLES OR PIPING EXHAUST
AIR IN SUBMERGED APPLICATIONS
Dimensions: S30 Non-Metallic DimensionsinInchesDimensionalTolerance:±1/8"
DimensionsinMillimetersDimensionalTolerance:±3mm
Note:PortingFlangesarealsoavailablewithPN1080mmDINboltingconfiguration.
DIMENSION AStandardPumpPulseOutputKitSoundDampeningMufflerMeshMuffler
167mm167mm349mm225mm
DIMENSION AStandardPumpPulseOutputKitSoundDampeningMufflerMeshMuffler
69/16”69/16”133/4”813/16”
s30nmdl2ds-REV0911 ModelS30Non-MetallicPage4
DISCHARGE PORT3” STANDARAD 125# FLANGE CONFIGURATION3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
MANIFOLD CANROTATE ±90ºFROM VERTICALCENTERLINE
BOLT PATTERN ISSYMMETRICAL ABOUTCENTERLINES
AIR INLET3/4” NPT
3/4” TYP.8 PLACES
BOTTOM VIEW
SIDE VIEW
FRONT VIEW
SUCTION PORT3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
STANDARD INTEGRAL MUFFLER:1” NPT EXHAUST PORT
FOR OPTIONAL MUFFLERSTYLES OR PIPING EXHAUST
AIR IN SUBMERGED APPLICATIONS
DISCHARGE PORT3” STANDARAD 125# FLANGE CONFIGURATION3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
MANIFOLD CANROTATE ±90ºFROM VERTICALCENTERLINE
BOLT PATTERN ISSYMMETRICAL ABOUTCENTERLINES
AIR INLET3/4” NPT
3/4” TYP.8 PLACES
BOTTOM VIEW
SIDE VIEW
FRONT VIEW
SUCTION PORT3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACEDON A 6” DIA. BOLT CHANGE.
STANDARD INTEGRAL MUFFLER:1” NPT EXHAUST PORT
FOR OPTIONAL MUFFLERSTYLES OR PIPING EXHAUST
AIR IN SUBMERGED APPLICATIONS
Dimensions: S30 Non-Metallic with Containment Duty DimensionsinInchesDimensionalTolerance:±1/8"
DimensionsinMillimetersDimensionalTolerance:±3mm
Note:PortingFlangesarealsoavailablewithPN1080mmDINboltingconfiguration.
Note:PortingFlangesarealsoavailablewithPN1080mmDINboltingconfiguration.
DIMENSION A BStandardPumpPulseOutputKitSoundDampeningMufflerMeshMuffler
69/16” 1211/16”69/16” 1211/16”133/4” 229/32”813/16” 1415/16”
DIMENSION AStandardPumpPulseOutputKitSoundDampeningMufflerMeshMuffler
167mm167mm349mm225mm
B322mm322mm579mm380mm