dataq2008catalog_hiresweb

8/8/2019 DATAQ2008catalog_hiresweb

1/28

2008 Catalog

f or t r o u b l e s ho o t i n g ,m a i n t e n a n c e ,design qualifcation,p r o c e s s m o n it o r in g ,a n d m e d i c a l r e s e ar c h

CAT-2008


2/282w w w. d a t a q . c o m

DI-718B Series with DI-8B ModulesIdentical in size and function to the DI-710, the DI-718B Series adds isolated 8B style plug-in am(up to eight). The small size of the DI-718B (5.44" 4.125" 1.5") and DI-8B modules (1.105" 1.65" 0.40") make this the smallest complete package for PC-based or stand-alone industrial data acquisitionapplications. See pages 16 and 17 for more information.

DI-158 SeriesThe DI-158 Series is a familyof Starter Kits featuring 4 xeddifferential input channels,12-bit measurement resolution,up to a 14,400 Hz samplethroughput rate, and up to 64Vfull scale measurement range.The DI-158 is an affordable yetextremely powerful solution toyour data acquisition needs. Seepage 26 for more information.

w w w. d a t a q . c o m

DI-730 SeriesThe DI-730 Series is our most popular dataacquisition system. Offering 1000V channel-to-channel and input-to-output isolation, a widedynamic measurement range of 10mV to 1000VDC (or peak AC) over six gain ranges, and USB, Ethernet, or printer port interface options,it is obvious why. The DI-730 is best suited for maintenance and troubleshooting DC drive systefinds applications in industrial mills, high speed trains, and rail and seagoing locomotion, as welmeasurements from motors and generators, supply voltage and current measurements, and field currentmeasurements from drive-roll, braking, and take-up motors. See page 11 for more information.

DI-710 Series

The DI-710 Series is a family of instruments that offers14-bit measurement resolution with sample rates up to14,400 Hz at a Full Scale Range of 10V and a stand-alone option that allows you to record data directly to aSecure Digital memory card. SD data may be uploaded via

the Ethernet interface.See page 14 for more information.


3/28


4/284w w w. d a t a q . c o m

WINDAQ Recording SoftwareSetupDouble-click and enter the channels you want to acquire intothe W INDAQ scan list. Click to select gain, signal averaging,true RMS, frequency, and peak or valley detection per channel.Click to de ne a single to 32-channel display either triggered

sweep (oscilloscope-like) or scrolling (chart recorder-like). Click again to de ne a sample rate ranging from less than one to up to250,000 per second. With W INDAQ /Pro+ you can even de ne dif -ferent sample rates on a per channel basis.

CalibrateDe ne calibration per channel to display waveform valuesmeaningful units such as psi, F or C, amps, rpm, watts, h- power any unit of measure you need.

RecordChoose a continuous waveform recording mode or the triggeredmode with selectable trigger level, slope, and pre- and post-trig-ger times. W INDAQ automatically time- and date-stamps, thenstreams acquired data to disk record as much data as you need.At the same time, W INDAQ supplies a real-time graphical displayof any or all channels so you always know where you are andwhere you are going.

AnnotateOf course, you can label any channel with text that describit Motor 1, Engine speed, Vertical position, etc. BW INDAQ also allows you to supply commented event markewhile you record Beginning test phase 1, Small vibrnoticed, Starting cool-down cycle, etc. Your comments our acquired data combine to form a complete diary of your dataacquisition session.


5/285 w w w .dat aq .c om

Recording is only half the solution. WINDAQ s WaveformBrowser playback software allows you to graphically manipulatewaveforms in ways youve never seen on a PC. Compress anentire recording to one screen-width for a birds eye view, then

expand around an area of interest for a closer look. Use the cursor to measure amplitudes and timing with precision. Move to anyevent marker with the click of a mouse button.

Playback

WINDAQ Playback SoftwareMultitaskDouble your productivity and let W INDAQ record while youreview last weeks results from your spreadsheet or compomemo with your word processor. You can even play back dalready stored to disk while you are still recording.

AnalyzeWaveform interpretation is easy with our built-in analysis func-tions. Apply frequency and ltering analysis with the WINDAQWaveform Browser FFT and DFT functions. Analyze any rangeof waveform data with the statistics function. Use X-Y plottingto examine the relationship of one channel to another. Extendedanalysis functions allow waveform peak detection, integration,differentiation, arithmetic operations, and more.

The W INDAQ Waveform Browser can export any range of dto your spreadsheet, or any other analysis or presentation pack-

age you use. You can even copy a graphical image displayethe W INDAQ Waveform Browser and paste it directly into a processing document. Finally, export any range of waveforgraphics to your printer for a hard copy record.

Export


6/28

Features

6w w w. d a t a q . c o m

Real-Time Waveform DataPort to Microsoft Excel

Run W INDAQ Minimized

FunctionTrue Multi-Tasking

Operation

No Programming

WINDAQ /XL Software

Further Insight into DataAcross the data acquisition landscape,there is a recurring need to derive moreinsight from acquired data in real timethan the primary signals can provide. Forexample, combining torque and rpm toderive horsepower; voltage and currenderive power; statistical analyses inclureal time means, peaks, medians, standarddeviations, etc.; real time pie, bar andcolumn charts of raw or calculated datW INDAQ /XL allows all this and more bapplying the calculating power of ExcW INDAQ -acquired data in real time.

Who should use this?Those who need to mathematicallycombine W INDAQ-acquired waveforms toyield calculated channels in real time.

Those who need a different waveformpresentation than W INDAQs waveformversus time. For example, real time bar,column and pie charts.Program-adverse users who want nothingto do with a graphical or standard programming language, but who need togenerate results in real time. Excel is themost widely-used spreadsheet softwareand its now simple to integrate it withW INDAQ .

Feature BeneftsReal-time waveformdata port to MicrosoftExcel in real time

Extends the analytical reach of W INDAQ byproviding a no-programming solution to calculatechannels using the most proli c spreadsheetpackage available. W INDAQ /XL will also instantlyport data from W INDAQ playback software into Excelwithout the need to generate intermediate les.

Run W INDAQMinimized Function

WINDAQ runs in the background with only the Excelapplication displayed.

No Programming You specify only a few parameters within Exceland the rest is automatically handled by Excel andWINDAQ /XL.

Real-Time Link to ExcelW INDAQ /XL is a software add-on toW INDAQ Acquisition software that allowsacquired data to be ported to MicrosoftExcel continuously in real time. TheW INDAQ data acquisition application isunaffected by W INDAQ /XL, and botha W INDAQ and Excel screen may bedisplayed simultaneously. Once in aspreadsheet, the full analytical power of Excel may be brought to bear on WINDAQ -acquired data to generate a limitless arrayof real-time calculations that lend insightand perspective to many applications.W INDAQ /XLs real-time transfer ratecan achieve several hundred samples persecond.



FeaturesCreates Calculated

Channels of Any Length

Automatic File

ManagementAutomatic Calibration

Seven WaveformCalculation Modules

Seamless Access FromPlayback Software

Advanced CODAS Analysis Software

The Waveforms displayed in windows 1 and 3 are the Advanced CODAS inputs. AdvancedCODAS applied the desired analysis, calculates the resulting waveforms, and outputs theresults in windows 2 and 4.

Acquired Waveforms

Flow

Pressure

Calculated Waveforms

Flow dt

Volume

d (Pressure)/dt

dP/dt

Advanced CODAS is a softwareenhancement to W INDAQ playback

software providing more sophisticatedanalysis and advanced functions.Beginning with acquired waveforms,Advanced CODAS creates new(calculated) channels without ever leaving the playback environment. Thecalculation functions, used individuallyor in any combination, may be appliedto any waveform with fully automaticcalibration in any desired unit of measure.Calculated channels are cleanly insertedinto the waveform le and assume thecharacteristics of an acquired channel.

Disk Streamer PerformanceGenerates calculated channels of anylength limited only by storage space.Insert and Overwrite ModesAdvanced CODAS allows calculated

waveforms to overwrite or appendthemselves to a le as new channels.Menus Or Batch FilesA single keystroke from the W INDAQWaveform Browser screen activates theAdvanced CODAS menu system of easy-to-use scripts. Simply enter calculationparameters, and activate the function.Often-used scripts may be combined into a batch le.Seven Calculation FunctionsDifferentiator, Integrator, Recti er, MovingAverage Filter, Arithmetic OperationsUtility, Peak and Valley Detector, andReport Generator.DifferentiatorCalculates a rate of change waveform with built-in, adjustable low-pass ltering.Integrator With 4 Reset MethodsGenerates the area bound by the curve,with reset: on zero crossing of the inputwaveform, on the level of the outputwaveform, on time, or as a function of anexternal event.

Rectifer Used in the analysis of polarized signals,this function produces a recti ed view of any waveform. Supported recti cationfunctions are absolute value (full wave), positive unipolar (half wave) and negativeunipolar (half wave).Moving Average FilterAlso referred to as a boxcar integrator, thisfunction is used for ltering noise or for generating mean waveforms. The functioncan also simulate a high pass lter toeliminate base line shifting.Arithmetic OperationsThis function allows you to combinewaveforms as a function of arbitrarymathematical formulas. Also supports phase shifting of selected waveforms inprecise increments.Peak and Valley DetectorDetects cycle-by-cycle in ection points(minimum and maximum excursion) onany periodic waveform. Allows peak-only,valley-only, or peak and valley selections.Report GeneratorGenerates a peak and valley report inspreadsheet format on a cycle-by-cycleor averaging basis. Reports value at peak,value at valley, rate (in Hz cycles/minute,or an interval in seconds), and mean.


8/28

Features


Supported by a Multitudeof Programming

Environments LikeVisual BASIC, Visual

C++, Borland, C++, andLabVIEW

Supports most DATAQInstruments Hardware

Products

ActiveX Software

The ActiveX control standard de ned byMicrosoft describes modular, reusablesoftware components that can be useduniversally by any environment that

supports the standard. For example,without modi cation, the same controlsmay be used by Visual BASIC, VisualC, Excel, your favorite control software package, and even your Web browser.DATAQ Instruments ActiveX controllibrary consists of ve components, eachaddressing a different application area.Context-sensitive on-line help is providedfor each control.

Support for ActiveX is multiplying atliterally an exponential rate. They are

supported by virtually all programmingenvironments like Visual BASIC, VisualC++, Borland C++, and LabVIEW. Highlevel analysis environments like Excelcan also support ActiveX controls. Inall these situations, the program has fullaccess to all the functionality providedby the control. In the case of DATAQInstruments controls, this functionalityincludes access to W INDAQ -acquireddata in real time, complete control overdata acquisition hardware functions,access to a graphic waveform plotting

DATAQ Instruments ActiveX controllibrary supports the following products:DI-148U, DI-150, DI-151, DI-154RS, DI-158 Series, DI-190, DI-194RS, DI-195B,DI-4xx products, DI-5xx products, mostDI-7xx products, DI-5001. The ActiveXcontrol library does not support DI-900MBproducts or the DI-770 Series.

Use ActiveX Controls Universallyutility, read/write access to WINDAQ data

les, and more. Further, the universalnature of the ActiveX control standardensures a consistent and highly simpli

software-to-hardware interface that yieprogramming code that is tremendouslyreduced in both size and complexity.

Who Should Use the ActiveXControl Library? Anyone experienced in a programmilanguage.

Novice programmers who want to gaimmediate results from their programmingenvironment of choice.

Anyone who needs to control a proceusing digital or analog outputs as afunction of W INDAQ -acquired data.

LabVIEW programmers who need asimple and effective way to implemenDATAQ Instruments Hardware.


9/289

Product Interface 1 Max Sample

Rate2

A/D

Resolution# of Channels 3 Analog

Output

Digital

I/OPage

PC-ConnectedDataAcquisitionSystems

DI-194RS C 240Hz 10-bit 4SE No 2/1 27

DI-148U U 14.4kHz 10-bit 8SE No 6 6 27

DI-158 U 14.4kHz 12-bit 4DI Yes 4 6 26

DI-195B C 240Hz 12-bit 2 5B No - 26

DI-710 U E 4.8kHz 14-bit 16SE/8DI No 8 6 14

DI-718B U E 4.8kHz 14-bit 8 8B No 2/0 7 16

DI-718Bx E 4.8kHz 14-bit 16 8B No 8 6 18

DI-720 P U E 250kHz 16-bit 5 32SE/16DI Yes 8/8 10

DI-722 P U E 50kHz 16-bit 5 32SE/16DI Yes - 13

DI-730 P U E 150kHz 14-bit 8DI, 16SE/8DI Yes - 11

DI-785 E 4 180kHz 16-bit 5 32 5B Yes 8/8 20

DI-788 E 4 180kHz 16-bit 5 32 8B Yes 8/8 211C=COM Port (Serial RS-232); P=Parallel Printer Port; U=USB; E=Ethernet. 2Maximum sample rates could varydepending upon interface and PC speed. 3SE=Single-ended; DI=Differential; 5B=Con gured for DI-5B signal conditioningmodules; 8B=Con gured for DI-8B signal conditioning modules . 4USB to Ethernet converter available. 514-bits whenused with W in D aq Software. 6Bi-directional bits. 7Two Inputs for Remote Control.

Stand-AloneData Loggers

DI-710 U E 8 14.4kHz 14-bit 16SE/8DI No 8 10 14

DI-718B U E 8 14.4kHz 14-bit 8 8B No 2/0 11 16

DI-718Bx E 9 14.4kHz 14-bit 16 8B No 8 10 188The DI-710, DI-718B, and DI-718Bx stand-alone data loggers can record data directly to Secure Digital (SD) memory.Data may be uploaded to PC via Ethernet cable. 9USB to Ethernet converter available. 10Bi-directional bits. 11Two Inputsfor Remote Control.

Expansionand SignalConditioning

DI-78B - - - 16 8B - - 19

DI-8B Industrial-Grade Ampli ers 17

DI-725/E - - - 32DI - - 12

Isolated

ThermocoupleMeasurements

DI-1000TC-4 C U 12 5Hz 0.8C 4DI No - 15

DI-1000TC-8 C U 12 5Hz 0.8C 8DI No - 1512Adapter required.

Oscilloscope DI-770 13 U 100MHz up to 16-bit 2 No - 2313Not Supported by W in D aq Acquisition and Playback Software (uses W in D aq /Scope software).

ModbusDistributed

DI-900MBSeries 14 RS-485 Varies dependent upon module. 24

14Not Supported by W in D aq Acquisition and Playback Software (uses 900MB Con guration software).

w w w. d a t a q . c o m

Hardware Selection GuideUse W in D aq Software with most of our hardware products.

Go to page 25 for Hardware Accessories .


10/28

Features


NEW Ethernet Interfaceprovides distributed and

synchronous data acquisition.See page 22 for more

information.

For General PurposeUse Where Pre-amplifed

Signals are Acquired

Standard Printer Port,Optional USB or EthernetInterface

14-Bit MinimumResolution

DI-720 Portable Systems

DI-720 Offers Lowest Cost perChannel of Any CompetingProductThe DI-720 Series accepts 32 high-levelor signal-conditioned analog inputs in

a single-ended mode or 16 inputs in adifferential input mode. The high-levelinputs are typically low impedance, pre-conditioned signals in the range of 1.25 to10 Volts full scale. Channel expansion upto 240 channels is possible with expanders.

High Resolution CapabilityDI-720 series instruments apply 16 bits of resolution to your measurement task (14when used with WINDAQ software) andyou can resolve 38 V.

Easy to Connect and UseAll instruments connect in seconds to yourPCs parallel port, Ethernet connector,or USB port. Connect your signals tothe DAS-16 compatible 37-pin Dconnectors. Other signal connectionoptions include the DI-706, which providesconvenient banana jacks, or the DI-705,which provides screw terminal strips (seepage 25 for more information).

The DI-720 Series and DI-730 Series arefamilies of instruments that offer highresolution waveform recording capability.They communicate through your PCs parallel port in EPP, bidirectional, or standard mode. Optional communicationinterfaces include USB and Ethernet.

Synchronized DistributedEthernet Data AcquisitionThe Ethernet communications optionconnects DI-720 Series products to anylocal area network (LAN). Direct Inte

access is also possible. This patent-pending communication option usesstandard CAT-5 cable to yield continuousdata acquisition throughput rates up to200kHz. Multiple DI-720 products (wan Ethernet interface) may be daisy-chained together to form an ad-hocextended network of autonomous, yet synchronous data acquisition stations.Station separation can be as far as 100meters. See page 22 for more information.

ApplicationsUse the DI-720 for general purposeapplications where pre-ampli ed signaare acquired. Examples include procesmonitoring and a variety of medicalresearch applications.



Features



information.

For Electric Motor/Generator Maintenanceand Troubleshooting inMills, Locomotion, and

DC Drive SystemsStandard Printer Port,

Optional USB or EthernetInterface

14-Bit Resolution

DI-730 Po rtable Systems

DI-730 Offers Isolation, WideDynamic Measurement RangeThe eight-channel DI-730 Series featuresa measurement range of 10mV to1000VDC (or peak AC) over six gain

ranges with 1000V channel-to-channeland input-to-output isolation. Replaceentire racks of isolation amps, high andlow voltage amps, and data acquisitionsubsystems with one, portable, lightweight9 7.3 1.5 inch instrument. Channel-to-channel isolation protects delicate controlcircuits, equipment, and personnel fromhigh common-mode voltages.

ApplicationsUse the DI-730 for wide dynamic rangemeasurements, especially those involvingAC or DC electric motors. Examplesinclude paper, aluminum, and steelmills; high speed trains; and rail andseagoing locomotion. The high samplerate, exceptional isolation, and CMR characteristics of the DI-730 make it well-suited for maintenance and troubleshootingof DC drive systems. Other applicationsinclude RPM measurements frommotor/generators, supply voltage andcurrent measurements, and eld currentmeasurements from drive-roll, braking,and take-up motors.

Synchronized DistributedEthernet Data AcquisitionThe Ethernet communications optionconnects DI-730 Series products to anylocal area network (LAN). Direct Internet

access is also possible. This patent-pending communication option usesstandard CAT-5 cable to yield continuousdata acquisition throughput rates up to150kHz. Multiple DI-730 products (withan Ethernet interface) may be daisy-chained together to form an ad-hocextended network of autonomous, yet fullysynchronous data acquisition stations.Station separation can be as far as 100meters. See page 22 for more information.

High Resolution CapabilityDI-730 series instruments apply 14 bits of resolution and you can resolve 0.30V.

Easy to Connect and UseAll instruments connect in seconds to yourPCs parallel port, Ethernet connector, or USB port. The DI-730 Series has integral banana jacks for easy signal connection.

The DI-720 Series and DI-730 Series arefamilies of instruments that offer highresolution waveform recording capabiThey communicate through your PCs parallel port in EPP, bidirectional,or standard mode. Other optionalcommunication interfaces include USBand Ethernet.


12/28

Features


32-Channel Expander

Programmable Gain

Powered By HostInstrumentSmall Size

(9 7.3 1.5 Inches)

Can Be Stacked andSecured With Optional

Stacking Brackets

DI-725 and DI-725E Expansion Systems

The DI-725 is a 32-channel analog

expansion unit for DI-720, DI-722, DI-730, and DI-740 instruments. It is availablein two models base measurementrange and extended measurement range(DI-725E). The base model features 32differential analog inputs, a programmablegain ampli er with gain selections of 1, 2, 4, and 8, and a 10 volt full scalemeasurement range. The extendedmeasurement range model increases thefull scale measurement range to 20 volts.

Differential Inputs Allows you to connect to a wider rangsignals with greater noise immunity an

exibility. In return for the 32 expansichannels it provides, each DI-725/Econsumes two channels from its hostinstrument. For example, when a singlDI-725 is connected to a DI-720, thecombination delivers 62 total channels (30are still available on the host instrument).When connected to a DI-730, the DI-7adds 32 high level differential inputs to thehosts 8 wide measurement range inpufor a diverse blend of 40 total channels. Atotal of 240 channels may be con gureusing multiple DI-725/Es.

No Additional Power SupplyThe DI-725/E derives power from the instrumentno additional power requStackable with OptionalHardwareOptional stacking brackets (part #100671)allow the DI-725/E to be stacked andmounted to the host instrument. Thestacking brackets come complete withmounting hardware to make installatiosnap. An optional stainless steel carryinghandle (part #100690) is also available forconvenient system handling.

General Purpose DI-725Model DI-725 offers 32 differential inputchannels. Each may be programmed for ameasurement range of 1.25, 2.5, 5, and10 volts full scale per channel.

725E for Rugged Applications The Model DI-725E expands the basemodel DI-725 to offer a measurementrange of 2.5, 5, 10, and 20 volts fullscale, which is also programmable per channel. Further, this model provides adifferential ampli er per channel withinput protection to 120V RMS.

Easy to Connect and Use The DI-725/E comes in the same sleek package as the DI-720, DI-722, andDI-730, which measures only 9 7.3 1.5 inches. Access to the analog inputsis provided through dual 37-pin, D-typeconnectors.

Custom Range Confgurations Since the DI-725Es extendedmeasurement range channels use anampli er per channel, many custom rangescan be con gured for minimal additionalcost. Contact us with your specialrequirements and let us quote a system thatis perfectly suited for your application.

Top: Front PanBottom: Rear Pan



Features



information.

2.5 to 20V Full-ScaleMeasurement Range Per

Channel

Input Protection to 120VRMS Per Channel

Full DifferentialMeasurement Capability

14-Bit MinimumResolution

DI-722 Data A cquisition System

The DI-722 Series provides differentialinputs featuring an ampli er per channwhich dramatically reduces channel

cross-talk compared to other multiplexsystems. This rugged design allowsmeasurement ranges of 2.5, 5, 10,and 20V full scale, programmable perchannel, with 120V RMS over voltageprotection (other custom measurementranges also available). These featuresallow the DI-722 Series to be used witcon dence and security in any applicawhere measurements exceed 10V fulscale and where the potential for anaccidental high-voltage (up to 120V Rconnection exists.

Product Highlights The DI-722 Series offers added exibilitywith customer-speci ed measurementranges allowing dif cult measurementssuch as in-vehicle testing or any othermeasurement application where a 10Vfull scale range is inadequate. The DI-722 Series also features full differentialmeasurement capability. Channels willtolerate up to 120V RMS normal andcommon-mode voltages without damage.16- and 32-channel con gurations areavailable.

Easy To Connect and Use All instruments connect in seconds to yourPCs parallel port, Ethernet connector,or USB port. Connect your input signalsto the DAS-16 compatible, 37-pin Dconnectors or use the optional DI-706,which provides convenient guarded banana jacks for signal connection.

Custom Range Confgurations Since the DI-722s extended measurementrange channels use an ampli er per channel, custom ranges can be con guredwith minimal added cost. Contact us withyour special requirements and let us quotea system that is suited for your application.

Synchronized DistributedEthernet Data AcquisitionThe Ethernet communications optionconnects DI-722 Series products to anylocal area network (LAN). Direct Internet

access is also possible. This patent-pending communication option usesstandard CAT-5 cable to yield continuousdata acquisition throughput rates up to200kHz. Multiple DI-722 products (withan Ethernet interface) may be daisy-chained together to form an ad-hocextended network of autonomous, yet fullysynchronous data acquisition stations.Station separation can be as far as 100meters. See page 22 for more information.

Expansion Flexibility Expand the analog channel capacity of DI-722-16 instruments now or any time inthe future with our DI-725, a 32-channelanalog input expander backpack. Or choose our DI-75B, an eight-channel,signal conditioned analog input backpack that allows you to make any conceivableindustrial measurement with full isolation.


14/28

Features


Low-Cost, Portable, USBor Ethernet Data Logger/

Acquisition System

16 Single-ended, 8Differential Analog Inputs

Stand-alone Data LoggerOption Allows Data to beSaved to Removable SD

Memory

DI-710 Data Acquisition/Logger System

The DATAQ Instruments DI-710 Series of products is a family of eight instrumentsfor general purpose and stand-alone data

acquisition applications. Options includeinterface type, input voltage range, andstandard (PC-tethered) or stand-aloneoperation. Interface options are USB or Ethernet. Gain ranges have selectablefactors per channel of 1, 2, 4, and 8, or1, 10, 100, and 1000. Instruments withthe stand-alone option feature a built-inmultimedia socket that accepts standardSecure Digital (SD) memories to whichacquired data may be stored without aconnected PC.

Stand-alone OperationUse a Secure Digital Card to record andstore dataup to 1GB. FIFO memorycon guration allows the DI-710 to recordcontinuously using a circular bufferapproach or to record-until-full. A push button allows manual start/stop controlover the recording process. A multi-colorLED shows instrument status (Record,Standby, Busy, Error).

Wide Signal Measurement RangeSuitable for use with many different signalsources, the 16-channel single-ended,8-channel differential DI-710 features aper channel measurement range of 10Vover four gain ranges. This allows you tosimultaneously measure a wide range of signals with ease.

High Throughput RateSupports sample throughput rates up to4800 samples/sec to PC (depending onhost computer speed) or 14400 samples/secto memory card (stand-alone models).

High Resolution14-bit resolution analog to digitalconversion provides a responsiveinstrument capable of registering changesas small as one part in 8,192 (0.012% of the full scale measurement range).

File ProtectionWhen powered down unexpectedly, thDI-710 Stand-alone model retains allacquired data on its memory card.

Easy to Connect and UseInstalls in seconds. Simply connect to yourcomputer's USB port or an Ethernet poConnect power, then connect your signto the provided screw terminal blocks ports each). Stand-alone models just nmemory card and power connection.

Included SoftwareBe up and running minutes out of the bwith WINDAQ software. WINDAQ /LiteRecording and Playback software isincluded free with the purchase of eveDI-710 instrument. Use WINDAQ /Lite

Playback software to review, measure,compare, and analyze data during or after arecording session.Con guration Software is included forstand-alone models allowing a compledata acquisition con guration to bedesigned and downloaded to the DI-71from any local or remote PC. Uploadisoftware is also provided to allow youread data stored to the SD card over theDI-710s Ethernet interface.

Visit us on the web to checkout our special online bonusbundle offer !
http://www.dataq.com/products/hardware/di710_bundle.htmhttp://www.dataq.com/products/hardware/di710_bundle.htmhttp://www.dataq.com/products/hardware/di710_bundle.htmhttp://www.dataq.com/products/hardware/di710_bundle.htmhttp://www.dataq.com/products/hardware/di710_bundle.htmhttp://www.dataq.com/products/hardware/di710_bundle.htmhttp://www.dataq.com/products/hardware/di710_bundle.htm



Features1000VDC and Peak AC

Input-to-Ouput andChannel-to-Channel

Isolation

Supports 7 TC Types

Built-in Open TCDetection

Wide CJC Range

USB or RS-232 AdapterRequired

Built-in RS-422 InterfaceThe built-in RS-422 interface allows DI-1000TC units to connect to any host PCthrough an adapter via an RS-232 or USB port and also serves as an expansion portfor other DI-1000 instruments. USB or RS-232 Adapter Required.

ExpandableMultiple DI-1000TC units may beconnected individually, or used asexpansion units with any combinationof DI-1000 instruments to addressany application-speci c situation. For example, multiple DI-1000TCs may beconnected to each other to provide uniquetwelve, sixteen, twenty, or other channelcounts. DI-1000TC products may also bemixed and matched with other DI-1000instruments to yield unique measurementcon gurations that feature various inputtypes (e.g., simultaneous TC, strain,digital I/O, and voltage) all with samplesynchronization.

PortableThe DI-1000TC is provided in a small(13.81D 10.48W 3.81H centimeters;57 16D 4 1 8W 1 1 2H inches) enclosureconsisting of an aluminum base and all-steel wraparound.

High Accuracy and ResolutionAllows sharpened decisions with anoverall accuracy of 0.2% of span, andtemperature resolution as ne as 0.08C.

IsolationThe DI-1000TCs 1000VDC and Peak AC input-to-output and channel-to-channel isolation allows grounded TCmeasurements.

Use with your PC or your PDA!

DI-1000TC for Temperature Measurements

DATAQ Instruments DI-1000TC Seriesproducts are a line of instrumentation

modules designed for temperaturemeasurements using thermocouples.The unit is provided in 4- or 8-channelversions, each channel supports one of seven thermocouple types: J, K, T, E, SB, or R. Temperature measurements mrange from -200C to +1820C (-328F to+3308F), depending upon thermocoupletype. Each DI-1000TC thermocouplechannel features a panel-mounted,miniature spade connector and all inputchannels are electrically isolated up to1000VDC or peak AC.


16/28

Features


Low-Cost, Portable, USBor Ethernet Data Logger/

Acquisition System

Accepts 8 Fully IsolatedDI-8B Plug-In Amplifers


Memory

DI-718B Data Acquisition/Logger System

The Model DI-718B is identical in sizeand function to the DI-710, but is designedto accept isolated DI-8B style plug-inampli ers. Up to eight ampli ers may be

installed in the DI-718B housing. Withover 90 different modules available, DI-8B signal conditioners can interface withvirtually any industrial signal. The intrinsicisolation of DI-8B ampli ers allowsaccurate and safe measurements even inthe presence of high off-ground voltages.The small size of the DI-718B (5.44 4.125 1.5 inches) and DI-8B modules(1.105 1.65 0.40 inches) make this thesmallest complete package for PC-basedor stand-alone industrial data acquisitionapplications.

For Use with DI-8B Plug-inSignal Conditioning ModulesEach channel on the DI-718Baccommodates one DI-8B moduleproviding a single channel of isolated input

protection, ampli cation, and ltering.DI-8B modules are plugged into a socketed backplane and are secured with a mountingscrew. Each channel has 4 correspondingscrew terminals for signal connections:channel+, channel-, excitation+, andexcitation-. These terminals satisfy alltransducer inputs and provide sensorexcitation if necessary. Access to the DI-8B modules is through a removable frontpanel.

High Throughput RateSupports sample throughput rates from0.0034 Hz up to 4800 Hz when acquiringdata to a PC (depending on host computerspeed) or from 0.0017Hz up to 14400Hzwhen recording to a memory card (stand-alone models).


Stand-alone OperationUse a Secure Digital Card to record anstore dataup to 1GB. FIFO memorycon guration allows the DI-718B torecord continuously using a circular bufferapproach or to record-until-full. A push button allows manual start/stop controover the recording process. A multi-colorLED shows instrument status (RecordStandby, Busy, Error).

File ProtectionWhen powered down unexpectedly, thDI-718B Stand-alone model retains allacquired data on its memory card.

Included SoftwareBe up and running minutes out of the bwith WINDAQ software. WINDAQ /Lite

Recording and Playback software isincluded free with the purchase of eveDI-718B instrument. Use the Playbacksoftware to review, measure, compare,analyze data during or after recording data.Con guration Software is included forstand-alone models allowing a compledata acquisition con guration to bedesigned and downloaded to the DI-71from any local or remote PC. Uploadisoftware is also provided to read datastored to SD over an Ethernet interface

http://www.dataq.com/products/hardware/di718B_bundle.htmhttp://www.dataq.com/products/hardware/di718B_bundle.htmhttp://www.dataq.com/products/hardware/di718B_bundle.htmhttp://www.dataq.com/products/hardware/di718B_bundle.htmhttp://www.dataq.com/products/hardware/di718B_bundle.htmhttp://www.dataq.com/products/hardware/di718B_bundle.htmhttp://www.dataq.com/products/hardware/di718B_bundle.htm



FeaturesDirect Interface to

Thermocouples, RTDs,Strain Gages, Voltage,and Process Current

SignalsHigh Accuracy, Low Drift

Input-to-Output Isolation

Mix-and-Match Modules

DI-8B Series Industrial Amplifers

The DI-8B Series Industrial Ampli erare low cost, high performance plug-insignal conditioners designed for use wDI-718B Data Logger/Data AcquisitionSystems. One- fth the size of competinproducts, DI-8B modules offer fullyfunctional performance with superior speci cations such as 0.05% accurac0.02% linearity, three poles of lterin1000VDC/Peak AC Input-to-Outputisolation (when used with the DI-718B500VDC/Peak AC Channel-to-Channelisolation (when used with the DI-718Blow output noise, small size (1.105" 1.65" 0.40"), and much more.

There is a DI-8B module for almost any industrial signal. Use the following list as ageneral guide to determine which module best suits your needs.

Model Description

DI-8B30 Analog Voltage Input Modules (10mV to 100mV), 3Hz

BandwidthDI-8B31 Analog Voltage Input Modules (1V to 60V), 3Hz Bandwidth

DI-8B32 Analog Current Input Modules

DI-8B33 Isolated True RMS Input Modules

DI-8B34 Linearized 2- or 3-Wire RTD Input Modules

DI-8B35 Linearized 4-Wire RTD Input Modules

DI-8B36 Potentiometer Input Modules

DI-8B38 Strain Gage Input Modules

DI-8B40 Analog Voltage Input Modules (10mV to 100mV), 1kHzBandwidth

DI-8B41 Analog Voltage Input Modules (1V to 60V), 1kHz Bandwidth

DI-8B42 2-Wire Transmitter Interface Modules

DI-8B45 Frequency Input Modules

DI-8B47 Linearized Thermocouple Input Modules

DI-8B50 Analog Voltage Input Modules (20mV to 100mV), 20kHzBandwidth

DI-8B51 Analog Voltage Input Modules (1V to 60V), 20kHz Bandwidth

Shown: A DI-718B with four DI-8B modules installed and an

Visit us on the web to check out our special online bonus bundle offer!


18/28

Features



Memory


Sample Rates from0.0017Hz up to 14,400Hz

DI-718Bx Data Acquisition/Logger System

The DI-718Bx Series Data Acquisition/Data Logger System is designed forgeneral purpose and stand-alone datalogging applications that require signal

conditioning. DI-718Bx instruments may be purchased with or without stand-alonecapability. Instruments without this optionmust remain tethered to a PCs Ethernet port (can be via a network) during dataacquisition and use the PCs own programand memory to store acquired data.Instruments with the stand-alone datalogging option feature a built-in socketthat accepts standard Secure Digital (SD)memories to which acquired data may bestored.

For Use with DI-8B Plug-inSignal Conditioning ModulesEach channel on the DI-718Bxaccommodates one DI-8B moduleproviding a single channel of isolated input

protection, ampli cation, and ltering.DI-8B modules are plugged into a socketed backplane and are secured with a mountingscrew. Each channel has 4 correspondingscrew terminals for signal connections:channel+, channel-, excitation+, andexcitation-. These terminals satisfy alltransducer inputs and provide sensorexcitation if necessary. Access to the DI-8B modules is through a removable toppanel.

High Throughput RateSupports sample throughput rates from0.0034 Hz up to 4800 Hz when acquiringdata to a PC (depending on host computerspeed) or from 0.0017Hz up to 14400Hzwhen recording to a memory card (stand-alone models).


Stand-alone OperationUse a Secure Digital Card to record anstore dataup to 1GB. FIFO memorycon guration allows the DI-718B torecord continuously using a circular bufferapproach or to record-until-full. A push button allows manual start/stop controover the recording process. A multi-colorLED shows instrument status (RecordStandby, Busy, Error).

File ProtectionWhen powered down unexpectedly, thDI-718Bx Stand-alone model retains aacquired data on its memory card.

Included SoftwareBe up and running minutes out of the bwith WINDAQ software. WINDAQ /Lite

Recording and Playback software isincluded free with the purchase of eveDI-718Bx instrument. Use the Playbacsoftware to review, measure, compare,analyze data during or after recording data.Con guration Software is included forstand-alone models allowing a compledata acquisition con guration to bedesigned and downloaded to the DI-71from any local or remote PC. Uploadisoftware is also provided to read datastored to SD over the Ethernet interfac

http://www.dataq.com/products/hardware/di718Bx_bundle.htmhttp://www.dataq.com/products/hardware/di718Bx_bundle.htmhttp://www.dataq.com/products/hardware/di718Bx_bundle.htmhttp://www.dataq.com/products/hardware/di718Bx_bundle.htmhttp://www.dataq.com/products/hardware/di718Bx_bundle.htmhttp://www.dataq.com/products/hardware/di718Bx_bundle.htmhttp://www.dataq.com/products/hardware/di718Bx_bundle.htm



Features16-Channel, 8B ModuleExpansion Device for

DI-720 and DI-730 SeriesInstruments

Mix and Match IsolatedModules for any Industrial

Measurement

Powered from the HostInstrument

DI-78B Signal Conditioning Backpack

Model DI-78B is a backpack expanderDI-720, DI-722, and DI-730 products. Itis a sleek unit that has the same footprintand height (9"L 7.29"W 1.52"H) as

DI-720 and DI-730 products, yielding anextremely capable yet compact solutiofor industrial measurements. The DI-78Baccepts up to sixteen 8B-style module(measurements include thermocouple,voltage, strain, frequency, process current,RTD, and potentiometric). DI-8B modmay be mixed and matched in anycombination suitable for your application.A maximum of one DI-78B may beused with a DI-720, DI-722, or DI-730instrument. The DI-78B is powered byhost unit using a supplied jumper cabl

Add a DI-78B to the DI-720,or DI-730 for Any IndustrialMeasurement ApplicationAdd the DI-78B to DI-720 or DI-730instruments for a complete, easy, and

convenient signal conditioning solution.Each channel consumes one channelfrom its host instrument in return forthe isolated, signal-conditioned input itprovides. One DI-78B may be connectedto any DI-720 or DI-730 instrument to add16 signal-conditioned input channels inaddition to any remaining channels on thehost instrument.

Make Industrial MeasurementsThrough DI-8B Plug-in SignalConditioning ModulesEach channel on the DI-78B accommodatesone DI-8B module, which provides asingle channel of isolated input protection,ampli cation, and ltering. Each channelhas four corresponding screw terminals for your signal connections: channel+,channel-, excitation+, and excitation-.These terminals satisfy all transducerinputs and provide sensor excitation whennecessary. Access to the DI-8B modules isthrough a removable top hatch cover.

Flexible Power RequirementsWhen used with either a DI-720 or DI-730, the DI-78B can be powered by theseinstruments through a supplied power jumper cable.

Similar FootprintThe DI-78B has the same dimensions asour DI-720 and DI-730 instruments (9"L 7.29"W 1.52"H). This allows the DI-78Bto be easily stacked and mounted to thehost instrument.

Easy to ConnectThe DI-78B connects to the hostinstrument in seconds with the suppliedinterconnecting cable. Simply connect oneend of this cable to the EXPANSION porton the host DI-720 or DI-730 instrument

and connect the other end to EXPANSIONIN on the DI-78Bs rear panel.

Stackable with IncludedHardwareThe included stacking brackets allow theDI-78B to be stacked and mounted to thehost instrument. The stacking bracketscome complete with mounting hardwareto make installation a snap. An optionalstainless steel carrying handle is alsoavailable for convenient system handling.

Shown: A DI-78B mounted atop a DI-730 Series Instr


20/28

Features




information.

DI-785 Industrial Data Acquisition System


Distributed SynchronousEthernet Interface

14-Bit Resolution

Up to 180KHz SampleThroughput Rate

The DI-785 supports 32 isolated inputchannels designed speci cally for DI-5B isolated ampli er modules andincorporates our new patent-pendingsynchronous Ethernet interface. The 785provides the most complete, cost-effective,and adaptable data acquisition systemavailable. Use any combination of DI-5Bsignal conditioning modules to suit anyapplication. Connect multiple 785s (and/orDI-720/730/788) systems together to formone synchronized data acquisition system.

For Use with Plug-in SignalConditioning ModulesEach channel on the DI-785 accommodatesone DI-5B module. These modulesprovide a single channel of isolated input

protection, ampli cation, and ltering.Signal conditioning modules are pluggedinto a socketed backplane and are securedwith a mounting screw. Each channelhas 4 corresponding screw terminals for signal connections: channel+, channel-,excitation+, and excitation-. Theseterminals satisfy all transducer inputs and provide sensor excitation if necessary.Access to the signal conditioning modulesis through a removable top panel.

High Throughput RateSupports sample throughput rates up to180,000 samples per second.

Built-in AC Power SupplyThe built-in switching AC power supplyallows the DI-785 to be powered directlyfrom AC line voltage.


Synchronized DistributedEthernet Data AcquisitionThe Ethernet communications optionconnects DI-785 products to any localarea network (LAN). Direct Internet

access is also possible. This patent-pending communication option usesstandard CAT-5 cable to yield continuousdata acquisition throughput rates upto 180kHz. Multiple DI-785, DI-788,DI-720, or DI-730 products may bedaisy-chained together to form an ad-hocextended network of autonomous, yet synchronous data acquisition stations.Station separation can be as far as 100meters. See page 22 for more information.

Convenient Signal ConnectionEight 16-position removable screwterminal blocks allow signal connectiobe made easily to the DI-785.

Included SoftwareBe up and running minutes out of the box with WINDAQ software. WINDAQ / Lite Recording and Playback softwareincluded free with the purchase of eveDI-785 instrument. Use the Playback software to review, measure, compare,analyze data during or after recording data.



Features



information.

DI-788 Industrial D ata Acquisition System


Distributed SynchronousEthernet Interface

14-Bit Resolution

Up to 180KHz SampleThroughput Rate

The DI-788 supports 32 isolated inputchannels designed speci cally for DI-8B isolated ampli er modules andncorporates our new patent-pendingsynchronous Ethernet interface. The 7provides the most complete, cost-effective,and adaptable data acquisition systemavailable. Use any combination of DI-signal conditioning modules to suit anyapplication. Connect multiple 788s (and/orDI-720/730/785) systems together to formone synchronized data acquisition system.

For Use with Plug-in SignalConditioning ModulesEach channel on the DI-788 accommodatesone DI-8B module. These modulesprovide a single channel of isolated input

protection, ampli cation, and ltering.Signal conditioning modules are pluggedinto a socketed backplane and are securedwith a mounting screw. Each channelhas 4 corresponding screw terminals for signal connections: channel+, channel-,excitation+, and excitation-. Theseterminals satisfy all transducer inputs and provide sensor excitation if necessary.Access to the signal conditioning modulesis through a removable top panel.

High Throughput RateSupports sample throughput rates up to180,000 samples per second.

Built-in AC Power SupplyThe built-in switching AC power supplyallows the DI-788 to be powered directlyfrom AC line voltage.


Synchronized DistributedEthernet Data AcquisitionThe Ethernet communications optionconnects DI-788 products to any localarea network (LAN). Direct Internet

access is also possible. This patent-pending communication option usesstandard CAT-5 cable to yield continuousdata acquisition throughput rates upto 180kHz. Multiple DI-788, DI-785,DI-720, and DI-730 products may bedaisy-chained together to form an ad-hocextended network of autonomous, yet fullysynchronous data acquisition stations.Station separation can be as far as 100meters. See page 22 for more information.

Convenient Signal ConnectionEight 16-position removable screwterminal blocks allow signal connections tobe made easily to the DI-788.

Included SoftwareBe up and running minutes out of the box with WINDAQ software. WINDAQ / Lite Recording and Playback software isincluded free with the purchase of everyDI-788 instrument. Use the Playback software to review, measure, compare, andanalyze data during or after recording data.


22/28

Features


Distributed Synchronous Data AcquisitionUse CAT-5 Ethernet Cables (up to 100meters each) to string multiple dataacquisition systems together.

One connectionto network or PC

Connect Multiple DI-720,DI-722, DI-730, DI-785

and/or DI-788 Ethernetproducts together toform one distributed

synchronous dataacquisition systemCustomize a data

acquisition system to suitany application

Typical ApplicationsMetal Mill applications

Steel strip millContinuous Pickle linesTemper steel rolling millsContinuous steel castingSeamless steel pipe millsContinuous aluminum castingAluminum rolling mills

Pulp and paper millsWire processesPressesDryersSize pressesCalendarsReelersUnwinders and slitters

PLC fne tuning and troubleshooting to

detect:Electrical sequencing variations and Mechanical valve actuation latencieMotor timing con ictsHydraulic spikes or drop outs

Structural wind/weather measurementsand audits

Tall buildingsLong bridge spansFloating platforms like oil rigsExtended length vessels like super

tankersWeb printing press

Distribute over LargeDistancesMultiple DI-720, DI-722, DI-730, DI-785,and/or DI-788 Ethernet products may bedaisy-chained together with CAT-5 cable

to form an ad-hoc extended network of separated, yet fully synchronous dataacquisition stations. The maximumdistance between stations can be as muchas 100 meters, and, using multiple stations,a distributed data acquisition network of virtually any length may be deployed.

High Sample RatesThe Ethernet option of DI-720, DI-722,DI-730, DI-785, and DI-788 products canyield continuous data acquisition rates upto 180KHz throughput for a single device(hardware dependent). Multiple devicesconnected to the same network can achievea total throughput rate as high as 1MHz or more (each unit is limited to 150KHz).

Included SoftwareW in Daq software supplied with Ethernetinterface versions of the DI-720, DI-722,DI-730, DI-785, and DI-788 providea complete environment for managingmultiple networks and ensuring synchronousdata acquisition, real time display, stream-to-disk, playback, export, and analysis.

Data acquisition systems are typicallysynchronized or distributed, but not both. Now, a new patent-pending classof high-speed data acquisition hardwarefrom DATAQ Instruments gives youthe best of both worlds. With it you canacquire data across a dispersed network of data acquisition systems, with completesynchronization.

Daisy-chainmore units



Features200mV to 80V Full Scale

Measurement Range

USB Interface

2 Analog Input ChannelsSample Throughput Rates

up to 100MHz

Up to 16-bit MeasurementResolution

DI-770 PC Oscilloscope

DI-770 Series Oscilloscope products provide hardware and software to supphigh speed data acquisition in a mannerthat is both price- and performance-

competitive with stand-alone digital stooscilloscopes. Two hardware versions aoffered, one sampling at a maximum raof 25 MHz and another at 100 MHz. Boare supported by W INDAQ/Scope softwarewhich offers ve virtual instrumentsin one: An oscilloscope, voltmeter,spectrum analyzer, data logger, and afunction/arbitrary waveform generator.These features offer unprecedentedinstrumentation power, speed, and

exibility.

Flexible PerformanceUsed by itself or in combination with other DATAQ Instruments products, the DI-770 Oscilloscope replaces conventionaldigital storage oscilloscopes (DSOs)that lack the DI-770s small size anddirect computer compatibility. Add tothis the instruments ability to operateincrementally as a voltmeter, data logger,spectrum analyzer, and a function/arbitrarywaveform generator and the instrumentis solidly positioned as an alternative tomultiple, bulky conventional instruments.Size matters in eld maintenance andtroubleshooting applications and the DI-770 Oscilloscope is the smallest multi-instrument solution available.

5 Virtual Instruments in OneDI-770 Hardware coupled with theprovided W INDAQ/Scope Softwareessentially offers 5 virtual instruments:an Oscilloscope, Voltmeter, Data Logger,Spectrum Analyzer, and Function/ArbitraryWaveform Generator.

High Resolution8-, 12-, 14-, or 16-bit measurementresolution is possible depending uponsample rate.

Easy to Connect and UseThe DI-770 oscilloscope features a USB2.0 interface that is backward compatiblewith USB 1.1. Power is derived directlythrough the USB cable so no external power supply is required.

Compact SizeMeasuring only 9 7.3 1.5 inchesthesame size as our DI-720 and DI-730 Seriesinstrumentsthe DI-770 oscilloscope isthe smallest multi-instrument solution for

eld maintenance and troubleshootingapplications.

StackableThe DI-770 oscilloscope can be directlymounted on any DI-720 or DI-730 Seriesinstrument to create a system combination

capable of addressing the entire industrialspectrum of voltages and frequencies.

High Measurement Range andSample RateEach channel provides a 200mV to 80Vfull scale input range, a 128K samplerecord buffer, and supports a sampling rate per channel of up to 100 MHz, dependingupon the model.


24/28

Features


Din Rail Mountable

Analog and Discrete I/OModules

Modbus-RTU Protocolfor Distributed I/O

Applications

RS-485 CommunicationUp to 115K bps

DI-900 MB Series

The DI-900MB Series is a collectionof analog and discrete I/O moduleswith Modbus-RTU protocol network communication. These modules are idealfor a wide variety of distributed I/Oapplications including data acquisitionand control, process monitoring, andtest and measurement. Windows-basedcon guration software simpli es modulesetup with easy selection of input/outputranges, alarm set points, and otheroperating parameters.

Model: 901 902 903 904 905 906 913 914 917 918 924 932 934 942

Analog InputsDC Voltage XDC Current XDC millivolt X

Thermocouple XRTD/resistance X X

Frequency XAC current* X

Analog OutputsDC voltage XDC current X

Discrete InputsActive low X X

Active high X XDiscrete Output

Sinking (low-side switch) X XSourcing (high-side switch) X X

Limit alarm X X X X XLimit alarm X X X

Power Confguration

DC powered X X X X X X X X X X X X X XAC powered X X X X X X X X X X X X X X

*requires external sensor

All DI-900MB modules communicate over a high-speed RS-485 network suppdata transfer rates up to 115K baud. Analog input modules accept variable DC voltage,current, and thermocouple sensor signals and feature local limit alarm capabilities.Analog output modules provide DC voltage or current eld control signals for displays, recorders, variable frequency drives, valves, and other control equipment.Discrete I/O modules monitor and/or control the on/off status of industrial devices. All

modules may be mixed/matched and coexist on the same Modbus network.

Shown: a DI-902MBDI-932MB, and a DI-942


25/28


26/2826w w w. d a t a q . c o m

DI-195B Low-Cost Starter Kit With Signal-Conditioned Inputs. Two Input Channels, 12-Bit, 5V ADC. Convenient Serial Port Interface.

Accepts DI-5B Series Plug-In Signal Conditioners. Includes WINDAQ /Lite recording and playback software.Product Highlights The DI-195B starter kit is a low-cost, two-channeldata acquisition starter kit with one importantdistinction; it features signal-conditioned inputs.It offers 12-bit measurement accuracy, a 5Vanalog measurement range, up to 240samples/second throughput, and a convenientserial port interface. Best of all, the signal-

conditioned inputs allow you to connect to virtuallyany industrial signal (i.e., VDC, VAC, thermocouple,RTD, frequency, current, potentiometer, strain, etc.) with600 volt input-to-output isolation.

Our DI-195B starter kit provides a taste of the exceptional power and speed possible with WINDAQ software. Whenconnected to your PCs serial port, the DI-195B starter kit allows you to record, display, and analyze data usisignals. The DI-195B is a small compact instrument measuring only 3 6 inches.

Each kit includes: (1) Model DI-195B data acquisition hardware device; (2) a CD-ROM containing WINDAQ acquisitionand analysis software, a full multi media software demonstration, application notes and articles; (3) a commucable to connect to your PC; (4) a power adapter; and (5) a screwdriver to connect signals.

DI-158 Series Record Data at sampling rates up to 14,400 samples/second. Low-cost, compact data acquisition kit with 12-bit resolution. Convenient USB interface. Four 10V or 64V xed differential analog inputs. Four general purpose bidirectional digital ports.Product HighlightsDI-158 products break new ground in price and performance, offeringadvanced features and options usually reserved for more expensiveinstruments. A channel scan list, high sample throughput rates, and anadvanced computer interface are just some of the features combinedto produce a robust instrument that can be applied to nearly any dataacquisition situation where low and high level signals need to beacquired to a PC. These USB devices are powered directly through theUSB interface. Gain range per channel options are 1, 2, 4, and 8 with afull scale range of 10 volts or 1, 2, 4, 8, 16, 32, 64, 128, 256, and 512 with afull scale range of 64 volts.Each kit includes: (1) Model DI-158 data acquisition hardware device; (2) a CD-ROM containing WINDAQ acquisitionand analysis software, a full multi media software demonstration, application notes and articles; (3) a commucable to connect to your PC; and (4) a screwdriver to connect signals.

Data Acquisition Starter Kits



DI-194RS Low-cost, compact data acquisition kit with 10-bit measurement resolution. RS-232 (serial port) interface. Record data at sampling rates up to 240 samples/second. Four 10V single-ended analog inputs. Two digital input bits for remote control. One digital output with a square wave generator.Product HighlightsThe DI-194RS is our lowest cost ($24.95*) PC-based dataacquisition starter kit offering four single-ended analog inputchannels at a 10V full scale measurement range with10-bit resolution. It features a serial port interface for easyconnection and installation to your computer. Power isderived through the serial port interface so no external power is required. Two digital input bits are providedfor remote start/stop and remote event marker placement. A digital output port is provided with anonboard square wave signal generator.The DI-194RS comes in a compact lightweight packagemeasuring only 2 2 1 inches and weighing less than3 ounces. The built-in 8 port screw terminal block allows for quick and easy signal connections. The DI-194RS is the most affordable and convenient way to try our WINDAQ dataacquisition and analysis software package.Each kit includes: (1) Model DI-194RS data acquisition hardware device; (2) a CD-ROM containing WINDAQ acquisitionand analysis software, a full multi media software demonstration, application notes and articles; (3) an RS-2communications cable to connect to your PC; and (4) a screwdriver to connect signals.

DI-148U Low-cost, compact data acquisition kit with 10-bit resolution. Convenient USB interface. Record data at sampling rates up to 14,400 samples/second. Eight 10V single-ended analog inputs. Six general purpose bidirectional digital ports.Product HighlightsThe DI-148U is a PC-based instruments that offers high dataacquisition performance for an extremely low price. The DI-148U haseight single-ended analog input channels with a xed 10 Volt fullscale range. Analog to Digital conversion resolution is 10 bits,allowing a minimum voltage sensitivity of 19.5mV. Six bidirectionalTTL ports may be used for general-purpose control. Two built-in,8-position screw terminal connectors allow easy and secure access toall DI-148 signal I/O connections without the need for extra options. TheDI-148U is highly portable and comes in a small plastic enclosure measuring2 2 1 inches and weighing only 3 ounces. Power is derived through theUSB port so no external power source is required.Each kit includes: (1) Model DI-148U data acquisition hardware device; (2) a CD-ROM containing WINDAQ acquisition and analysis software, a full multi media software demonstration, application notes and articles; (communications cable to connect to your PC; and (4) a screwdriver to connect signals.

Data Acquisition Starter Kits

*For purchases made in the U.S. only.


28/28

DATAQ Instruments, Inc.241 Springside Drive

Akron, Ohio 44333Telephone: 330-668-1444Fax: 330-666-5434

E-mail: [email protected]: http:// www.dataq.com
http://www.dataq.com/http://www.dataq.com/

dataq2008catalog_hiresweb

Documents