YZCELECTRONICS & TECHNOLOGIES

The FIR 107 T/R system is an IR Extender over Coaxial System that allows user to control audio/video source from another room using your exis�ng remote control.

This system consist of 2 main parts namely FIR 107R (Receiver Host) and FIR 107T (Transmi�er Host).

FIR 107R (Receiver Host) Place at the same loca�on as A/V system. Example: Living RoomLiving room- FIR 107R (Receiver Host) is connected to the coaxial cabling and the IR Emi�er on FIR 107R is to be pasted on the IR sensor of the A/V system.

FIR 107T (Transmi�er Host)- Place at another loca�on (example: bedroom) where you want to remote control the A/V system (living room). Room - FIR 107T (Transmi�er Host) is connected to the coax cabling in the room where you want to control your A/V system (living room). The IR Receiver on FIR 107T receive signal from remote control and send signal to the living room.

Note: The remote control has to be line of sight with the IR Receiver in order to control well.Note: This IR extender kit do not extend the Audio and video signal. User has to prelay cable (HDMI, RCA cables) from A/V systems in the living room to TV in the bedroom.

Overview

Remote Control IR Extender over RF Coaxial Distribu�on Model: FIR107T/R

Set Up for Living Room FIR 107R

1. Connect from Antenna to Set Top Box ( STB) -RF IN Coaxial cable2. Connect STB to TV1-HDMI/RCA cable3. STB RF Out to FIR 107R RF IN-Coaxial cable4. FIR 107R RF Out to Wall plate-Coaxial cable5. Insert IR Emi�er cable to FIR 107R and paste Emi�er on STB IR sensor-IR Emi�er cable6. Insert IR Receiver cable to FIR 107R and place it visible to communicate with Remote control. Op�onal unless STB is hidden in cabinet IR Receiver cable7. Connect DC5V to FIR 107R-DC5V 500mAh adapter

*Ensure the IR Receiver is line of sight with your remote control*IR Emi�er must be pasted on the IR sensor of STB.

Installation

The IR Receiver on FIR 107T (Transmi�er Host) will pick up the IR signals from your remote control in the bedroom and send signal via the coax cabling in your home, to FIR 107R (Receiver Host) in the living room.

FIR 107R (Receiver Host) will re-emit signal to its IR emi�er which send the signal to your A/V system.

How it works?

1 x RF Transmi�er Module (FIR-107T) 1 x RF Receiver Module (FIR-107R) 1 x IR Single eye Emi�er Cable 1.0m1 x IR Single Head Receiver Cable 3.0m2 x Power Adapter DC 5V 500mAh 1.2m1 x User Manual

Standard Content

RF Transmi�er Module - Model: FIR107TIR Receiver - Model: IRRSingle eye IR Emi�er - Model: IRE-1

Op�onal Accessories

Set Up for Room FIR 107T

1. Connect from Wall plate to FIR 107T RF In-Coaxial cable2.Connect FIR 107T RF Out to TV2 RF In-Coaxial cable3.Insert IR Receiver cable to FIR 107R and place it visible to communicate with Remote control IR Receiver cable4.Connect DC5V to FIR 107R-DC5V 500mAh adapter

*Ensure the IR Receiver is line of sight with your remote control

Technical Data

FIR107T Transmi�er Host L78 X W36 X H22 mm 65g

Connectors IEC60 169.2 ( 9.5mm) 3.5mm Stereo Jack

IR Receiver cable 30- 60 kHz 3.0m 45g

Power AC110/220V-DC5V 500mA DC 5V 1.2m 68g

Weight 180g

FIR107R Receiver Host L78 X W36 X H22 mm 70g

Connectors IEC60 169.2 ( 9.5mm) 3.5mm Stereo Jack

Control Signal (Input) 11MHz

IR Receiver cable 30- 60 kHz 3.0m 45g

IR Emi�er cable 38kHz 1.0m 15g

Power AC110/220V-DC5V 500mA DC 5V 1.2m 68g

Weight 198g

DECLARATION OF CONFORMITYYZC Singapore confirms that the products conform ELECTRONICS & TECHNOLOGIESto relevant EEC harmonized standards and consequently can carry CE-mark. Relevant harmonized standards:FCC Part 15, Subpart B, Class B; ANSI C63.4:2014EN 55013:2013; EN 55020:2007+A11:2011EN 61000-3-2:2014; EN 61000-3-3:2013

Specifica�ons subject to change without no�ce© 2016 YZC SingaporeELECTRONICS & TECHNOLOGIES

www.ir-extender.net

All content in this datasheet including text, product pictures, illustra�on diagrams are proprietary rights under YZC Electronics And Technologies. No part of this datasheet maybe copied or reproduced

without the jurisdic�on of YZC Electronics and Technologies. Specifica�on subject to changes without prior no�ce.