IMPORTANT!“No Diving” signage is a component of the swimming pool andmust be installed on the coping around the perimeter of your

pool. “Caution” signage also must be affixed to the steps.

This Area Warning Signmust be permanently andConspicuously Affixed inthe pool area so it can beeasily seen by everyoneusing the Pool.

Make Safety A Priority!Remember, while covers are designedand used for safety and maintenance

devices, it is recommended that coversare not walked on for any reason.

The Warranty information provided repre-sents a brief synopsis of the full writtenwarranties for the products described. Westand behind every product we producepursuant to those representations whichare stated in our written warranty only.

NOTICE: Your dealer/builder/contractor isan independent business person. We can-not and do not accept any responsibilityfor any representations, statements orcontracts made by any dealer/builder/con-tractor.

All cover samples are for illustration pur-poses only. The manufacturer reservesthe right to change cover selections with-out notice. Covers depicted are represen-tative of the actual material; however,variations in color and shading may occur.

The Association of Pool and SpaProfessionals is a registered trademark of The Association of Pool and SpaProfessionals. Used by permission.

Fort Wayne Pools© is a copyright ofLatham Pool Products, Inc.

6930 Gettysburg Pike • Fort Wayne, IN 46804Phone: (260) 432-8731 • Fax: (866) 889-1430

As members of APSP, we would like to inform you of sev-eral publications that you may wish to request from APSP:“The Sensible Way to Enjoy Your Inground SwimmingPool”; “Children Aren’t Waterproof”; “Pool and SpaEmergency Procedures for Infants and Children”. Thesepublications can be ordered from the APSP by calling orwriting them at The Association of Pool and SpaProfessionals, 2111 Eisenhower Avenue, Alexandria, VA22314, 800-323-3996. Or visit the APSP consumer website at theapsp.org.

STAY OFF COVER.

KEEP CHILDREN AWAY. CHILDREN OR OBJECTS CANNOT BE SEEN UNDER COVER.

REMOVE COVER COMPLETELY BEFORE ENTRY OF BATHERS - ENTRAPMENT POSSIBLE.

NON-SECURED OR IMPROPERLY SECURED COVERS ARE A HAZARD.

FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN INJURY OR DROWNING.

INSPECT COVER REGULARLY FOR PREMATURE WEAR OR DETERIORATION.

······

DATE OF MANUFACTURE: SERIAL NUMBER:

AVOID D R O W N I N G R I S K

BY: LATHAM PLASTICS, INC787 WATERVLIET-SHAKER RDLATHAM, NY 12110

Please put safety first!

www.surfthepool.com

• Heavy duty double-coil low profile springsstandard on custom covers

• Stainless steel low profile “D-Ring” springsavailable on all stock mesh and LitePro covers

• Exceeds ASTM standards when properlyinstalled

• Custom non-corrosivehardware and brass anchors

• Double decker edge

• Coping anti-rub strips

• UV resistant material

• Bio-shade technology

• 1'' polypropylene webbing with daVinci name

• Solid cover with INVIS-A-DRAIN™

• Interlocked, double overlap seams for optimum strength

SAFETY COVERS

AVAILABLE IN:s ProTex Mesh tLitePro 7 oz. Solid s Bio-Shade Mesh tHeavy-Duty Solid

We put safety first!We put safety first!

ADLIT 802-10 3.5M mz 5/10

TM

TM

1/4'' drain holes are located

every 6'' in reinforced vinyl,

down the center of the cover.

Beneath is a 12'' wide mesh

drain filter panel designed for

easy cleaning. No other manu-

facturer offers this feature.

Heavy duty stainless steel dou-

ble-coil springs, with

D-Rings for ease of installation

and adjustment. They have a

lower profile – so covers lay flat

and fit tight when properly

installed. Standard on Custom

Covers. (except LitePro material)

Coping anti-rub strips

protect your cover without

making marks or scars – keep

your pool and cover looking

new for years.

Use of a weighted cover pump

to immediately pump off all

standing water, such as rain or

melting snow will maintain all

applicable safety standards.

A potential trouble spot for pool

covers is the perimeter – where

they can fray and unravel. The

daVinci cover is first hemmed,

then sandwiched between dou-

ble layers of webbing. Edges

can't unravel, you get years of

trouble-free performance.

Easy installation around raised

walls, water features, spas and

other deck accessories. Designed

to maintain a tight cover fit.

Perfect for narrow pool decks. All

stainless steel hardware with

brass anchors.

Excellence shows in the details. Like

box tack reinforcement on all perime-

ter straps. Protective pads positioned at

step nosings to prevent abrasion. And

added protection on every component,

including the thread, to resist ultra-vio-

let rays and pool chemicals. Plus, it

comes with a 20-Year Warranty.

Insist on an daVinci Safety Cover

to ensure the quality that you

expect from Fort Wayne Pools.

You’ll find the daVinci name

woven right in the webbing. No

other manufacturer offers this

feature.

A cover is only as strong as its seams

The daVinci Safety Cover

seams are interlocked and

double overlapped for

optimum strength. This seam

is the foundation of the daVinci

Safety Cover. No other manu-

facturer offers this feature.

Beware of imitators

Won’t rub your pool the wrong way

Featuring built-to-last details

Our double decker edge

Solid Cover with Optional Pump

Reduced Deck Mount™ System

SAFETY COVERS

Patent Pending

This screw-on plastic cap will make

it easy to add chemicals to your

pool after the safety cover has been

secured down. An effective tool,

especially for those who open their

pools in late spring.

New KEM-KAP™

TM

Custom Dual Spring ensures a tighter fit

Solid Safety Cover with INVIS-A-DRAIN™

You’ll reap the benefits of a solidcover, with the ease and han-dling of a mesh cover when youchoose our ProTex Mesh safetycover material. Manufactured with a light andtight woven material, ProTexMesh safety covers are designedto allow water through fordrainage and safety while keepingsunlight and debris out for easeof maintenance and peace of mind.Available in green only.

Lightweight solid LitePro Solidsafety covers are about half theweight of our Heavy-Duty Solidcover.Our LitePro Solid safety coverwill block out all of the sun’srays, yet the lightweight materialallows for easy installation andremoval.Available in green and blue.

Heavy-DutySOLID

Heavy-Duty Solid safety coversstand up to what-ever mother nature can dish out.Our Heavy-Duty Solid safetycover material will completely block out all of thesun’s rays. It is one of the industry’s mostdurable covers and comes stan-dard with the INVIS-A-DRAIN™

system, keeping all the debris andsun’s rays out, allowing onlywater to pass into your pool. Available in green and blue.

A customized engineered meshdesigned to inhibit the growth ofalgae in your pool.A durable long lasting polypropy-lene mesh material with built indurability and strength to protectyour family and your investment.Available in green, blue and tan.

™

™

U.S. Patent 6,886,187-98

We designed our daVinci Safety Covers to protect both yourfamily and your pool.

Our pool covers are manufactured to your specific pool size andshape. The daVinci Safety Cover will help prevent accidentalintrusion into your pool by children and pets when properlyinstalled. We put safety first by manufacturing a high quality,durable cover constructed for optimum performance – backedby the best warranty in the industry – the daVinci Safety Cover20-Year Warranty.

The daVinci Safety Covers are available in four material choices:ProTex™ Mesh; Bio-Shade™ Mesh; LitePro™ 7oz. Solid; and ourHeavy-Duty 12 oz. Solid.

Protect your family...and

your investment!

To extend the life of your cover,

order your cover with our NEW

Replaceable Perimeter Pad. A velcro

application allows the durable

padding to be removed for easy,

convenient replacement. Protect

your cover and extend its life simply

by using the NEW Replaceable

Perimeter Pad.

New Replaceable Perimeter Pad

NEWCOLOR!NEWCOLOR!TANTAN

The NEW 35” Installation Rod is

ergonomically designed to make

installation and removal virtually

effortless. The additional length pro-

vides built-in convenience and

relieves potential back strain.

New 35” Installation Rod

At last there is a solution for stone

and paver decks set in mortar.

The NEW 10” Steel Deck Tube

has been designed specifically for

this application. (Do not use as a

lawn tube.)

New 10” Steel Deck Tube

Our NEW and IMPROVED Brass

Anchor provides optimum strength

and longevity. And we’ve redesigned

our tamping tool to seat better on the

anchor for easy installation. Another

reason to choose an daVinci Safety

Cover™.

New & Improved Brass Anchor & Tamping Tool

IMPORTANT!“No Diving” signage is a component of the swimming pool andmust be installed on the coping around the perimeter of your

pool. “Caution” signage also must be affixed to the steps.

This Area Warning Signmust be permanently andConspicuously Affixed inthe pool area so it can beeasily seen by everyoneusing the Pool.

Make Safety A Priority!Remember, while covers are designedand used for safety and maintenance

devices, it is recommended that coversare not walked on for any reason.

The Warranty information provided repre-sents a brief synopsis of the full writtenwarranties for the products described. Westand behind every product we producepursuant to those representations whichare stated in our written warranty only.

NOTICE: Your dealer/builder/contractor isan independent business person. We can-not and do not accept any responsibilityfor any representations, statements orcontracts made by any dealer/builder/con-tractor.

All cover samples are for illustration pur-poses only. The manufacturer reservesthe right to change cover selections with-out notice. Covers depicted are represen-tative of the actual material; however,variations in color and shading may occur.

The Association of Pool and SpaProfessionals is a registered trademark of The Association of Pool and SpaProfessionals. Used by permission.

Fort Wayne Pools© is a copyright ofLatham Pool Products, Inc.

6930 Gettysburg Pike • Fort Wayne, IN 46804Phone: (260) 432-8731 • Fax: (866) 889-1430

As members of APSP, we would like to inform you of sev-eral publications that you may wish to request from APSP:“The Sensible Way to Enjoy Your Inground SwimmingPool”; “Children Aren’t Waterproof”; “Pool and SpaEmergency Procedures for Infants and Children”. Thesepublications can be ordered from the APSP by calling orwriting them at The Association of Pool and SpaProfessionals, 2111 Eisenhower Avenue, Alexandria, VA22314, 800-323-3996. Or visit the APSP consumer website at theapsp.org.

STAY OFF COVER.

KEEP CHILDREN AWAY. CHILDREN OR OBJECTS CANNOT BE SEEN UNDER COVER.

REMOVE COVER COMPLETELY BEFORE ENTRY OF BATHERS - ENTRAPMENT POSSIBLE.

NON-SECURED OR IMPROPERLY SECURED COVERS ARE A HAZARD.

FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN INJURY OR DROWNING.

INSPECT COVER REGULARLY FOR PREMATURE WEAR OR DETERIORATION.

······

DATE OF MANUFACTURE: SERIAL NUMBER:

AVOID D R O W N I N G R I S K

BY: LATHAM PLASTICS, INC787 WATERVLIET-SHAKER RDLATHAM, NY 12110

Please put safety first!

www.surfthepool.com

• Heavy duty double-coil low profile springsstandard on custom covers

• Stainless steel low profile “D-Ring” springsavailable on all stock mesh and LitePro covers

• Exceeds ASTM standards when properlyinstalled

• Custom non-corrosivehardware and brass anchors

• Double decker edge

• Coping anti-rub strips

• UV resistant material

• Bio-shade technology

• 1'' polypropylene webbing with daVinci name

• Solid cover with INVIS-A-DRAIN™

• Interlocked, double overlap seams for optimum strength

SAFETY COVERS

AVAILABLE IN:s ProTex Mesh tLitePro 7 oz. Solid s Bio-Shade Mesh tHeavy-Duty Solid

We put safety first!We put safety first!

ADLIT 802-10 3.5M mz 5/10

TM

TM