ddb catalog
TRANSCRIPT
DDB Unlimited, Inc. was founded by Kelvin “Dusty” Mahorney. Being raised in Broken Arrow, Ok, Dusty and his three brothers shared the daily duties in their father’s television repair shop. As an adult and holding a first class license, Mr. Mahorney was employed by a Motorola repair facility in Tulsa, OK and then went on to a GE repair facility in Oklahoma City, Ok. In 1978 at the age of 23, Mr. Mahorney opened and operated, a two-way radio repair shop in Lindsay, Ok. In 1987, Mr. Mahorney and his four children moved to Jacksboro, Tx. and started a company called Texas Two-Way Fone. T.T.W.F. sold and repaired two-way radio systems and also provided service as a private carrier; serving a four state area: TX, Ok, Ark, and LA.
It was the building out of TTWF’s system that brought on the need for a secure, economical, available and less cumbersome outdoor enclosure. Having serviced almost every brand in the industry for 21 years, Mr. Mahorney knew what the aggravating moments were as to purchasing, repairing and building out with outdoor enclosures (trying to get the doors open in the rain, keeping mice from destroying the equipment inside, trying to lug the monster enclosure from the tower site single handedly in for repair, backorder promises, vandalism …).
In 1996, DDB Unlimited, Inc. was formed and intensive engineering, testing, and development were completed. With a new 11 acre, 12,000 sq ft facility we rolled out the OD series line product. The industry’s response was miraculous, resulting in the Mahorney family solely focusing their efforts on customer satisfaction and delivery.
In 2003, a 38,500sq ft facility was obtained in Wynnewood, ok, and OEM contract manufacturing began.
In 2004, the corporate offices, production and all employees were moved to the Wynne-wood facility.
In 2007, another 43 acre parcel of land and office building of 6,000 sq ft was obtained in Wynne-wood, ok.
With our 74 employee’s and a total square footage of 72,000 sq. ft. we define ourselves, as a grateful, competent and competitive enclosure manufacturer. Daily, we accommodate the single unit customer as well as the major players in their build outs, shipping products world wide.
Today various product lines have been developed. Bullet proof products are being shipped. Time and engineering developing all aspects of thermal management is ongoing. Solid Works E-drawings are provided at no cost to the customer.
DDB INFO:
FOUNDER INFO:
3
NEMA RATINGS DATA SHEET NEMA TYPE 1:
Indoor use primarily to provide a degree of protection against contact with the enclosed
equipment. These products should only be used in areas where unusual service con-
ditions do not exist.
NEMA TYPE 3:
Intended for outdoor use to provide a degree of protection against rain, sleet, and wind
blown dust. Undamaged by the formation of ice on the enclosure.
NEMA TYPE 3R:
Intended for outdoor use to provide a degree of protection from falling rain and
sleet. Undamaged by the formation of ice on the enclosure.
NEMA TYPE 4:
Intended for either indoor or outdoor use to provide a degree of protection from falling
rain, splashing water and hose directed water. Undamaged by the formation of ice
on the enclosure.
NEMA TYPE 4X:
Intended for either indoor or outdoor use to provide a degree of protection from falling
rain, splashing water and hose directed water. Undamaged by the formation of ice
on the enclosure. Resists corrosion.
4
Table of Contents 2………………….Title Page
3..............................Introduction
4………………….NEMA Ratings
5………………….Table of Contents
6………………….OD-30DX, OD-30DXC
8………………….OD-30DDC
10………………...OD-50DX, OD-50DXC
12………………...OD-50DD, OD-50DDC
14………………...OD-50DDX, OD-50DDXC
16………………...OD-62DX, OD-62DXC
18………………...OD-62DD, OD-62DDC
20………………...OD-62DDX, OD-62DDXC
22………………...OD-78DX, OD78DXC
24………………...OD-78DD, OD-78DXC
26………………...OD-78DDX, OD-78DDXC
28………………...2OD-62DDXC-A1
30………………...PSOD-192420FT
31………………...SOD-372420FT
32………………...ST & SY-Series
33………………...BOD-Series
Accessories
34…………………Rails
35…………………Mounting Trays & Shelves
36…………………Heaters
37…………………Climate Control Fan Kits
38…………………Air Conditioners
5
30”H x 25”W x 25”D
OD-30DX OD-30DXC
The OD-30DX is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-30DX offers the protection needed for any
severe outdoor environment. The OD-30DX is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
6
Weight – 90 lbs. (assembled) // 150 lbs. (shipping)
Door Opening Clearance: Height – 25 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 30 ¼ inches Depth – 25 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 27 ½ inches
Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 30 ½ inches Depth - 29 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 30 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 30 inches
Usable Depth = Maximum: 21 ½”
Minimum: 19 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 26.75" - 30.00" 3.25" 21.50"
26.57" - 26.75" .18" 20.50"
21.00" - 26.57" 5.57" 21.50" Center 9.00" - 21.00" 12.00" 19.75"
3.43" - 9.00" 5.57" 21.50"
3.25" - 3.43" .18" 20.50" Bottom 0.00" - 3.25" 3.25" 21.50"
7
30”H x 25”W x 34”D
OD-30DDC
The OD-30DD is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-30DD offers the protection needed for any
severe outdoor environment. The OD-30DD is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
8
Weight – 105 lbs. (assembled) // 165 lbs. (shipping)
Door Opening Clearance: Height – 25 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 30 ¼ inches Depth – 34 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 36 ½ inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 30 ½ inches Depth - 38 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 30 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 30 inches
Usable Depth = Maximum: 21 ½”
Minimum: 19 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 26.75" - 30.00" 3.25" 30.50"
26.57" - 26.75" .18" 29.50"
21.00" - 26.57" 5.57" 30.50" Center 9.00" - 21.00" 12.00" 28.75"
3.43" - 9.00" 5.57" 30.50"
3.25" - 3.43" .18" 29.50" Bottom 0.00" - 3.25" 3.25" 30.50"
9
50”H x 25”W x 25”D
OD-50DX OD-50DXC
The OD-50DX is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-50DX offers the protection needed for any
severe outdoor environment. The OD-50DX is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
10
Weight – 120 lbs. (assembled) // 170 lbs. (shipping)
Door Opening Clearance: Height – 45 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 50 ¼ inches Depth – 25 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 27 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 50 ½ inches Depth - 29 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 50 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 50 inches
Usable Depth = Maximum: 21 ½”
Minimum: 19 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 46.75" - 50.00" 3.25" 21.50"
46.57" - 46.75" .18" 20.50"
31.00" - 46.57" 15.57" 21.50" Center 19.00" - 31.00" 12.00" 19.75"
3.43" - 19.00" 15.57" 21.50"
3.25" - 3.43" .18" 20.50" Bottom 0.00" - 3.25" 3.25" 21.50"
11
50”H x 25”W x 34”D
OD-50DD OD-50DDC
The OD-50DD is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-50DD offers the protection needed for any
severe outdoor environment. The OD-50DD is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
12
Weight – 150 lbs. (assembled) // 210 lbs. (shipping)
Door Opening Clearance: Height – 45 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 50 ¼ inches Depth – 34 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 36 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 50 ½ inches Depth - 38 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 50 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 50 inches
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 46.75" - 50.00" 3.25" 30.50"
46.57" - 46.75" .18" 29.50"
31.00" - 46.57" 15.57" 30.50"
Center 19.00" - 31.00" 12.00" 28.75"
3.43" - 19.00" 15.57" 30.50"
3.25" - 3.43" .18" 29.50"
Bottom 0.00" - 3.25" 3.25" 30.50"
13
50”H x 25”W x 42”D
OD-50DDX OD-50DDXC
The OD-50DDX is the superior design in communication cabinets, being as rigid as steel and yet noticea-
bly lighter than the old heavy steel constructed cabinets. The OD-50DDX offers the protection needed for
any severe outdoor environment. The OD-50DDX is constructed of 0.125” ALUMIFLEX material and
comes with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from
falling ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system,
which utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
14
Weight – 170 lbs. (assembled) // 230 lbs. (shipping)
Door Opening Clearance: Height – 45 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 50 ¼ inches Depth – 42 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 44 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 50 ½ inches Depth - 44 11/16 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 50 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 50 inches
Usable Depth = Maximum: 38 ½”
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section
Top 46.75" - 50.00" 3.25" 38.50"
46.57" - 46.75" .18" 37.50"
31.00" - 46.57" 15.57" 38.50"
Center 19.00" - 31.00" 12.00" 36.75"
3.43" - 19.00" 15.57" 38.50"
3.25" - 3.43" .18" 37.50"
Bottom 0.00" - 3.25" 3.25" 38.50"
15
62”H x 25”W x 25”D
OD-62DX OD-62DXC
The OD-62DX is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-62DX offers the protection needed for any
severe outdoor environment. The OD-62DX is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
16
Weight – 140 lbs. (assembled) // 200 lbs. (shipping)
Door Opening Clearance: Height – 57 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 62 ¼ inches Depth – 25 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 27 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 62 ½ inches Depth - 29 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 62 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 62 inches
Usable Depth = Maximum: 21 ½”
Minimum: 19 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section
Top 58.75" - 62.00" 3.25" 21.50"
58.57" - 58.75" .18" 20.50" 37.00" - 58.57" 21.57" 21.50"
Center 19.00" - 31.00" 12.00" 19.75"
3.43" - 25.00" 21.57" 21.50"
3.25" - 3.43" .18" 20.50" Bottom 0.00" - 3.25" 3.25" 21.50"
17
62”H x 25”W x 34”D
OD-62DD OD-62DDC
The OD-62DD is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-62DD offers the protection needed for any
severe outdoor environment. The OD-62DD is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
18
Weight – 195 lbs. (assembled) // 255 lbs. (shipping)
Door Opening Clearance: Height – 57 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 62 ¼ inches Depth – 34 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 38 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 62 ½ inches Depth - 38 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 62 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 62 inches
Usable Depth = Maximum: 30 ½”
Minimum: 28 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 58.75" - 62.00" 3.25" 30.50"
58.57" - 58.75" .18" 29.50"
37.00" - 58.57" 21.57" 30.50" Center 19.00" - 31.00" 12.00" 28.75"
3.43" - 25.00" 21.57" 30.50"
3.25" - 3.43" .18" 29.50"
Bottom 0.00" - 3.25" 3.25" 30.50"
19
62”H x 25”W x 42”D
OD-62DDX OD-62DDXC
The OD-62DDX is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-62DDX offers the protection needed for any
severe outdoor environment. The OD-62DDX is constructed of 0.125” ALUMIFLEX material and comes with
an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling ice and
the sun’s heat penetration. Ultimate security is provided by a three point locking system, which utilizes
NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
20
Weight – 200 lbs. (assembled) // 260 lbs. (shipping)
Door Opening Clearance: Height – 57 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 62 ¼ inches Depth – 42 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 44 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 62 ½ inches Depth - 44 11/16 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 62 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 62 inches
Usable Depth = Maximum: 38 ½”
Minimum: 36 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 58.75" - 62.00" 3.25" 38.50"
58.57" - 58.75" .18" 37.50"
37.00" - 58.57" 21.57" 38.50" Center 19.00" - 31.00" 12.00" 36.75"
3.43" - 25.00" 21.57" 38.50"
3.25" - 3.43" .18" 37.50"
Bottom 0.00" - 3.25" 3.25" 38.50"
21
78”H x 25”W x 25”D
OD-78DX OD-78DXC
The OD-78DX is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-78DX offers the protection needed for any
severe outdoor environment. The OD-78DX is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
22
Weight – 165 lbs. (assembled) // 225 lbs. (shipping)
Door Opening Clearance: Height – 73 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 78 ¼ inches Depth – 25 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 27 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 78 ½ inches Depth - 29 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 78 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 78 inches
Usable Depth = Maximum: 21 ½”
Minimum: 19 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 74.75" - 78.00" 3.25" 21.50"
74.57" - 74.75" .18" 20.50"
45.00" - 74.57" 29.57" 21.50" Center 33.00" - 45.00" 12.00" 19.75"
3.43" - 33.00" 29.57" 21.50"
3.25" - 3.43" .18" 20.50"
Bottom 0.00" - 3.25" 3.25" 21.50"
23
78”H x 25”W x 34”D
OD-78DD OD-78DDC
The OD-78DD is the superior design in communication cabinets, being as rigid as steel and yet noticeably
lighter than the old heavy steel constructed cabinets. The OD-78DD offers the protection needed for any
severe outdoor environment. The OD-78DD is constructed of 0.125” ALUMIFLEX material and comes
with an additional 0.125” ALUMISHEILD top cover, thereby fully protection you equipment from falling
ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which
utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
24
Weight – 205 lbs. (assembled) // 265 lbs. (shipping)
Door Opening Clearance: Height – 73 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 78 ¼ inches Depth – 34 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 38 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 78 ½ inches Depth - 38 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 78 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 78 inches
Usable Depth = Maximum: 30 ½”
Minimum: 28 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section
Top 74.75" - 78.00" 3.25" 30.50"
74.57" - 74.75" .18" 29.50"
45.00" - 74.57" 29.57" 30.50" Center 33.00" - 45.00" 12.00" 28.75"
3.43" - 33.00" 29.57" 30.50"
3.25" - 3.43" .18" 29.50"
Bottom 0.00" - 3.25" 3.25" 30.50"
25
78”H x 25”W x 42”D
OD-78DDX OD-78DDXC
The OD-78DDX is the superior design in communication cabinets, being as rigid as steel and yet
noticeably lighter than the old heavy steel constructed cabinets. The OD-78DDX offers the protection
needed for any severe outdoor environment. The OD-78DDX is constructed of 0.125” ALUMIFLEX
material and comes with an additional 0.125” ALUMISHEILD top cover, thereby fully protection
you equipment from falling ice and the sun’s heat penetration. Ultimate security is provided by a
three point locking system, which utilizes NEMA stainless steel padlocking handles.
Standard Features
Gasket = Sealed with 13/16” aluminum filled gaskets
Material = 0.125” ALUMIFLEX
Finish = Flat aluminum RF properties: Non-ferrous
Paint = Powder baked on textured paint
Vents = 30 bottom louvers per door
12 top louvers in top cover (under ALUMISHIELD)
Filter = 1 removable Poly Filter panel per door
12 fixed filter pads in top cover
Exterior Screws = Stainless with NEMA washers and nylon locking nuts
Alumishield = Top cover (shields cabinet from the sun)
Handles = 3 point pad locking stainless steel
Doors = Front and rear
Rails = 1 set of standard EIA 19” (23” – optional)
NEMA Rated = Class 250 Type 4, 4X
26
Weight – 230 lbs. (assembled) // 290 lbs. (shipping)
Door Opening Clearance: Height – 73 13/16 inches Width – 19 ½ inches
Exterior Cabinet Dimensions – Main Body: Width – 25 ½ inches Height – 78 ¼ inches Depth – 42 1/4 inches
Alumishield: Width - 28 1/16 inches Hang down -1 ¾ inches Depth - 44 11/16 inches Handle Protrusion – 1 7/8 inches
Total Occupied Space: Width - 28 1/16 inches Height - 78 ½ inches Depth - 44 11/16 inches
Inside Clearance (less rails): Width - 23 5/8 inches Height - 78 inches Depth - see table below
Ratings – NEMA Class 250 Type 4, 4X
Paint Tested: 500 hr salt spray 500 hr immersion Warranty - Period 15 Years – Unconditional
Racking Specifications
Rails = 2 standard (for additional rails, see accessories)
Alodine coated
Holes tapped to 10x32 threads
Each rail supported by R-STRUTS (0.125” ALUMIFLEX material)
Spacing = 19” EIA standard
Positioning = All rails fully adjustable from front to rear
Usable Height = 78 inches
Usable Depth = Maximum: 38 ½”
Minimum: 36 ¾” (see table below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 74.75" - 78.00" 3.25" 38.50"
74.57" - 74.75" .18" 37.50"
45.00" - 74.57" 29.57" 38.50" Center 33.00" - 45.00" 12.00" 36.75"
3.43" - 33.00" 29.57" 38.50"
3.25" - 3.43" .18" 37.50"
Bottom 0.00" - 3.25" 3.25" 38.50"
27
62"H x 51”W x 42"D
2OD-62DDXC-A1 (Painted Cream)
The 2OD-62DDXC-A1 is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The 2OD-62DDXC-A1 offers the protection needed for any severe outdoor environment. The 2OD-
62DDXC-A1 is constructed of 0.125” ALUMIFLEX material, & comes with an additional 0.125” ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration. Ultimate security is pro-
vided by a three point locking system, which utilizes a NEMA stainless steel padlocking handle.
Standard Features Gasket = Sealed with 13/16" aluminum filled gaskets
Material` = 0.125” ALUMIFLEX
Paint = Powder Baked on Textured Paint, RF properties: Non-ferrous
Climate Control = (2) 6,000 BTU A/C 220V with 400 watts of heat.
Battery Compartments = 16” H x 25” W x 42” D with 2 = Battery Mounting Tray’s
Electrical = 100 Amp Load Center with 4 Populated 4-Square Outlets
Interior = Florescent Light 110V
Exterior Screws = Stainless with NEMA washers & nylon locking nuts & 6 heavy duty lifting hooks.
Alumishield = Top cover, Shades cabinet from the sun
Handles = 3 Point Pad Locking Stainless Steel
Doors = 2 Front and 2 Rear with door alarm switches
Rails = 4 sets of Standard EIA 19” (23” - Optional)
Fully Adjustable & Alodine Coated
Splice Chamber = Spool up Fiber or Cables
NEMA Rated = Class 250 Type 4, 4X
28
Weight - 440 lbs. Assembled weight // 550 lbs. Shipping weight
Door Opening Clearance - Height 57 13/16 inches
Width 19 1/2 inches
Exterior Cabinet Dimensions - Main Body
Width: 51 inches
Height: 62 1/4 inches
Depth: 42 1/4 inches
Alumishield Width - 56 1/2 inches
Hang down height: 1 3/4 inches
Depth: 44 11/16 inches
Handles Protrude 1 7/8 inches
Total Space Occupied - Width: 56 1/2 inches
Height: 62 1/2 inches
Depth: 46 inches
Inside Clearance - Less Rails
Width: 23 5/8 inches
Height: 62 inches
Depth: See racking spec's - useable depth chart below
Ratings - NEMA Class 250 Type 4, 4X
Paint - Tested
500 Hour salt spray
500 hour immersion
Warranty - Period 15 Years - Unconditional
Racking Specifications Rails = Four standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by two R-STRUTS
0.125” material (ALUMIFLEX) Spacing = 19" EIA
STANDARD
Positioning = All rails fully adjustable from front to rear
Useable Height = 78 inches
Useable Depth = Maximum: 38 1/2" Minimum: 36 3/4" (See below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 58.75" - 62.00" 3.25" 38.50"
58.57" - 58.75" .18" 37.50"
37.00" - 58.57" 21.57" 38.50" Center 19.00" - 31.00" 12.00" 36.75"
3.43" - 25.00" 21.57" 38.50"
3.25" - 3.43" .18" 37.50"
Bottom 0.00" - 3.25" 3.25" 38.50"
29
19"H x 24”W x 20"D
PSOD-192420FT (Painted Cream)
Standard Features
Gasket = Sealed with 13/16" aluminum filled gaskets Material = 0.125” ALUMIFLEX
Paint = Powder Baked on Textured Paint, RF properties: Non-ferrous
Cooling Fans = (F-15-115T) 110 Volt, 110 cfm Adjustable Thermostat
Electrical = 4” sq gang box with 4 outlets (4SQ-P)
Exterior Screws = Stainless with NEMA washers & nylon locking nuts
Handles = Pad Locking Stainless Steel
Rails = 1 sets of Standard EIA 19” & Alodine Coated Mounting = Pole or Wall Mountable
NEMA Rated = Class 250 Type 4, 4X
General Exterior Dimensions = 19” H x 24” W x 20” D
Interior Dimensions = 17 1/4” H x 22” W x 19 3/8” D Weight = 55 Lbs
Standard
· Cooling Fan (F-15-115T) 110 cfm Adjustable Thermostat · Electrical 4” sq gang box with 4 outlets (4SQ-P) · Four RF knockouts .065” dia. (for type N RF con) on floor of unit · Four Power knockouts ¾” dia. on floor of unit · Ground stud on floor of unit · Louvered 7.5 “ x 10” 5 micron nylon filter / Removable Side Panel · 2 = 4" C-Channel in Rear for Mounting with Slots
30
37"H x 24”W x 20"D
SOD-372420FT (Painted Cream)
Standard Features Gasket = Sealed with 13/16" aluminum filled gaskets Material = 0.125” ALUMIFLEX
Paint = Powder Baked on Textured Paint, RF properties: Non-ferrous
Cooling Fans = (F-15-115T) 110 Volt, 110 cfm Adjustable Thermostat
Electrical = 4” sq gang box with 4 outlets (4SQ-P)
Exterior Screws = Stainless with NEMA washers & nylon locking nuts
Handles = Pad Locking Stainless Steel
Rails = 1 sets of Standard EIA 19” & Alodine Coated
Mounting = Pole or Wall Mountable with PMS 3030 shelf
NEMA Rated = Class 250 Type 4, 4X
General Exterior Dimensions = 37” H x 24” W x 20” D
Interior Dimensions = 35” H x 22” W x 18 3/4” D Weight = 63 Lbs
Standard · Cooling Fan (F-15-115T) 110 cfm Adjustable Thermostat · 1/2" Insulation Installed (.5INS) · Electrical 4” sq gang box with 4 outlets (4SQ) · Four RF knockouts .065” dia. (for type N RF con) on floor of unit · Four Power knockouts ¾” dia. on floor of unit · Ground stud on floor of unit
31
ST, SY, Outdoor and Indoor NEMA Enclosures
Racking and Non Racking Cabinet Enclosures
ST - Series Indoor Enclosures
Adjustable 19" Standard EIA Racking
Part # Description ST-30D 30"H X 23"W X 17"D
ST-30DX 30"H X 23"W X 25"D
ST-30DD 30"H X 23"W X 34"D
ST-42D 42"H X 23"W X 17"D
ST-42DX 42"H X 23"W X 25"D
ST-42DD 42"H X 23"W X 34"D
SY Series Indoor Enclosures
Part # Description
SY-32DXL 32"H X 23"W X 25"D
SY-42DXL 42"H X 23"W X 25"D
SY-50DXL 50"H X 23"W X 25"D
SY-72DXL 72"H X 23"W X 25"D
32
Battery Box Enclosures
BOD-DX
Outdoor Battery Box 16" High, 25" Deep, 25" Wide
(Mounting Tray 2" H X 20 "D X 18 3/4" W)
* Painted Cream
BOD-DD
Outdoor Battery Box 16" High, 34" Deep, 25" Wide
(Mounting Tray 2" H X 29" D X 18 3/4" W)
* Painted Cream
BOD-DDX
Outdoor Battery Box 16" High, 42" Deep, 25" Wide
(Mounting Tray 2" H X 37" D X 18 3/4" W)
* Painted Cream
33
34
OOD-46DXC-BAC
Build Assembly
Painted Cream
OD-30DXC (Top Enclosure)
30"H X 25"D X 25"W (19" or 23" Racking)
BOD-DX (BATTERY BOX) (Bottom Enclosure)
Outdoor Battery Box 16" High,25"Deep,25" Wide
(Mounting Tray 2" H X 20 "D X 18.75"W)
AC-2400I-H
2400 BTU Air conditioner 110 Volts w/400 Watt Internal Heat option
35
OOD-54DX-GP
Build Assembly
Assembly Features:
4000 BTU 220 VOLTS W/ 400 WATTS
HEAT
100 AMP Main w/ Electrical w/ Twist
Lock
Ext. Generator Plug w/ Manual Transfer
Switch
Door Alarm Switch's
Fluorescent Light
Spool-Up Side Box
Ground Bar
R3.3 Insulation
Spool Up Side Box Specifications:
Dimensions: 26”Hx22”Wx10”D
Security: 2 Quarter Turn Screwdriver Locks
Construction: .125 ALUMIFLEX with continuous
welds at all seams
Finish: Unpolished Unpainted Aluminum
Plate: 1/2” Plywood Removable Plate
Ground Bar: 1/4”x2”x10” Copper Ground Bar
(Includes 10 pair of 7/16” pre-
drilled universal lug holes)
36
OOD-62DD-VGP
Build Assembly
Spool Up Side Box Specifications:
Dimensions: 26”Hx22”Wx10”D
Security: 2 Quarter Turn Screwdriver Locks
Construction: .125 ALUMIFLEX with continuous
welds at all seams
Finish: Unpolished Unpainted Aluminum
Plate: 1/2” Plywood Removable Plate
Ground Bar: 1/4”x2”x10” Copper Ground Bar
(Includes 10 pair of 7/16” pre-
drilled universal lug holes)
48 Volt Power Supply
19” Mid-Mount Power Shelf
10VV Basic Controller w/ Ethernet Port
(4) 20 amp Breakers
(2) 48 Volt, 20 Amp Inter-cooled Rectifiers
Logo Blank Rectifier
10’ Alarm Cable
Battery Inter-Cell Cables
Assembly Features: 4000 BTU 220 VOLTS W/ 400 WATTS
HEAT
100 AMP Main w/ Electrical w/ Twist
Lock
Ext. Generator Plug w/ Manual Transfer
Switch
Door Alarm Switch's
Fluorescent Light
Spool-Up Side Box
Ground Bar
R3.3 Insulation
16”x17” Center Rail Mount Battery Tray
(4) 100 Amp Hr, 12 Volt Batteries
37
PSOD-192420-AC
Build Assembly
Standard Features:
1000 BTU Air Conditioner 110V
1/2” Insulation
(2) Electrical 2” x 4” Gang Boxes with Dual Outlets
(4) RF Knockouts .065” diam. on Floor of Unit
(for type NRF con.)
(4) power Knockouts 3/4” diam. on Floor of Unit
Ground Stud on Floor of Unit
Louvered 7.5” x 10.5” Micron Filter/Removable Side Panel
(2) 4” C-Channel Mounting Brackets with slots
(on the rear of the unit)
Rails
Part # Description
PR-2-10 Xtra POD-Series 10" Rails, 19" Racking
PR-2-30 Xtra POD-Series 30" Rails, 19" Racking
R-2-30 Xtra OD-Series 30" Rails, 19" Racking
R-2-50 Xtra OD-Series 50" Rails, 19" Racking
R-2-62 Xtra OD-Series 62" Rails, 19" Racking
R-2-78 Xtra OD-Series 78" Rails, 19" Racking
R-2-30-23 Xtra OD-Series 30" Rails, 23" Racking
R-2-50-23 Xtra OD-Series 50" Rails, 23" Racking
R-2-62-23 Xtra OD-Series 62" Rails, 23" Racking
R-2-78-23 Xtra OD-Series 78" Rails, 23" Racking
STR-2-30 Xtra ST-Series 30" Rails
STR-2-42 Xtra ST-Series 42" Rails
38
MT-D MT-DX MT-DD
12" Deep Mounting Tray 20" Deep Mounting Tray 29” Deep Mounting Tray
Single Rail
Mounting Trays
SMT-17
7" Deep Adjustable Single Rail Mounting Tray
Pole or Wall
Mounting Shelf Standard PMS-3030
14"H X 30"W X 30"D
Mounting Trays
MT Series Shelves below are 19" EIA Racking Supported with Front and Rear Support Rails
39
Heating Options (HT-100) (HT-300) (HT-600)
Part # Description
HT-100 100 Watt 115V AC Flex
HT-300 300 Watt 115V AC Flex
HT-600 600 Watt 115V AC Flex
HT-600/48 600 Watt 48V DC Flex
Rugged, yet thin, lightweight and flexible... the use of Wallow silicone rubber heaters is limited only by your imagination.
With these heaters, you can put the heat where it's needed and in the process, improve heat transfer, speed warm-ups and
decrease wattage requirements.
Fiberglass-reinforced silicone rubber gives your heater dimensional stability without sacrificing flexibility because very little
material separates the element from the part, heat transfer is rapid and efficient.
HVL-031 400 Watt Fan Heater
Small, compact size fan heater. Maintains minimum operating temperatures in enclosures. Helps to prevent failure of electronic
components caused by condensation and corrosion.
• Built-in overheat protection
• Heater can be purchased separately for OEM use
• DIN Rail mountable
40
Climate Control Fan Kits
Part # Description
DFMP-168 16" X 8" Fan & Inlet Panel Plate Kit
F-25-115T 2 - 115 Volt 220 CFM Fan Kit with Thermostat
F-25-115 2 - 115 Volt 220 CFM Fan Kit without Thermostat
F-25-220T 2 - 220 Volt 220 CFM Fan Kit with Thermostat
F-25-220 2 - 220 Volt 220 CFM Fan Kit without Thermostat
F-25-48T 2 - 48 Volt 220 CFM Fan Kit with Thermostat
F-25-48 2 - 48 Volt 220 CFM Fan Kit without Thermostat
F-25-24T 2 - 24 Volt 220 CFM Fan Kit with Thermostat
F-25-24 2 - 24 Volt 220 CFM Fan Kit without Thermostat
F-25-12T 2 - 12 Volt 220 CFM Fan Kit with Thermostat
F-25-12 2 - 12 Volt 220 CFM Fan Kit without Thermostat
F-15-115T 1 - 115 Volt 220 CFM Fan Kit with Thermostat
F-15-115 1 - 115 Volt 220 CFM Fan Kit without Thermostat
F-15-220T 1 - 220 Volt 220 CFM Fan Kit with Thermostat
F-15-220 1 - 220 Volt 220 CFM Fan Kit without Thermostat
F-15-48T 1 - 48 Volt 220 CFM Fan Kit with Thermostat
F-15-48 1 - 48 Volt 220 CFM Fan Kit without Thermostat
F-15-24T 1 - 24 Volt 220 CFM Fan Kit with Thermostat
F-15-24 1 - 24 Volt 220 CFM Fan Kit without Thermostat
F-15-12T 1 - 12 Volt 220 CFM Fan Kit with Thermostat
F-15-12 1 - 12 Volt 220 CFM Fan Kit without Thermostat
41
Air Conditioners
Part # Description
AC-1000I 1000 BTU 110 VOLTS // 13.12"H x 14.5"W x 8"D
AC-1000I2 1000 BTU 220 VOLTS // 13.12"H x 14.5"W x 8"D
AC-2400I 2400 BTU 110 VOLTS // 24"H x 10"W x 10"D
AC-2400I2 2400 BTU 220 VOLTS // 24"H x 10"W x 10"D
AC-4000I-H 4000 BTU 110 VOLTS W/ HEAT // 30.10"H X 12.27"W X 8.34"D
AC-4000I2-H 4000 BTU 220 VOLTS W/ HEAT // 30.10"H X 12.27"W X 8.34"D
AC-6000I 6000 BTU 110 VOLTS // 35.97"H X 15.94"W X 7.35"D
AC-6000I2 6000 BTU 220 VOLTS 35.97"H X 15.94"W X 7.35"D
AC-8000I 8000 BTU 110 VOLTS 42.10"H x 15.94"W x 10.35"D
AC-8000I2 8000 BTU 220 VOLTS 42.10"H x 15.94"W x 10.35"D
AC-10000I2 10000 BTU 220 VOLTS 52.09"H X 17.65"W X 10.34"D
AC-12000I2 12000 BTU 220 VOLTS 52.09"H X 17.65"W X 10.34"D
42