delta - pc electric€¦ · delta enclosures are well suited for all applications. especially in...
TRANSCRIPT
Connectionfutureto the
Wall mounting, thermoplastic insulated distribution boxes
Delta EnClosurEs
2
Delta Distribution boxes
3
Enclosures are suitable for in- and outdoor areas. The enclosures are
available in different sizes and designs.
Protection degree : IP54 and IP66/67
The massive and high-quality enclosure made from PC/ABS tested and cer-
tified according to IEC/EN 62208* provides a wide range of positive features.
Such as high impact resistance and notched bar impact strength, high thermal
stability, dielectric strength, weather, UV and wear resistance, good insulation
properties, and resistance against many chemicals. The material used is free
from cadmium, red phosphor and halogens (fluorine, chlorine, bromine, iodine
and astatine).
DELTA enclosures are well suited for all applications. Especially
in those areas that depend on high-quality, a robust enclosure and total reliability,
such as in industry, trade, workshops, agriculture, household, public
buildings, leisure, sport, marinas, camping, etc.
DELTA series products are combinable and can be arranged in horizontal
or vertical directions. STROBL and ANIF series are especially recommended
here. Using this feature, it is possible to achieve individual combination
groups of any size with single enclosures. In few words, the diversity of variants
has almost no limits.
*) IEC/EN 62208 „Enclosures for low-voltage switchgear and controlgear assemblies“ foruse in switchgear and controlgear assemblies according to standards of the series EN 60439,EN 61439 with a max. rated voltage of 1000V AC, at max. frequencies of 1000Hz or 1500V DC,for general use indoors or for outdoor installation.
Delta information
4
2
3
4
1
8
9
10
Delta DEtail
5
5
6
11
7
1 Cable entries up to max. M63, preferably from the top or bottom.
2 PCE hinged windows from 2 to 14 modules can be used in IP54 or IP66/67. The transparent protective, upward opening, cover of the window can be locked and sealed.
3 A variable groove shaped rail retention system on the inside floor allows optimum and individual positioning of the fittings, assembly plates, etc.
4 The cover and bottom part of the enclosure is connected by a flexible hinge, available in 2 different lengths.
5 The enclosures can be optimally adapted to each other thanks to the straight housing walls.
6 All external screws are made from stainless steel to resist in especially demanding operating conditions.
7 Wall mounting is possible in- or outside the protective area.
8 The earthing and neutral conductor connections can be mounted in the cover of the box on the tried and tested Vario-Connector-System.
9 Use of high-quality foamed* polyurethane seals.
10 Any type of switchgears, plug devices, such as CEE sockets 16A 3p to 125A 5p and schuko sockets (Austrian/German, Belgian/French, Danish, British or Swiss standards) can be used for assembling.
11 Metric thread insert made of brass**.
*) inserted in series Lech**) with series Lech directly in the plastic
6
114
255
204
239
183
20132
0
304
222 114
Strobl7 gerade 0TE140
520
22250
5
201
Sölden gerade 0TE
520
297
503
280
165
LOFER4 255x204x114
ANIF4 320x222x114
STROBL7 520x222x140
SÖLDEN 520x297x165
enclosures straight no window
» straight cover version» housing protection IP66/67
901713
» straight cover version» housing protection IP66/67
913453
» straight cover version» housing protection IP66/67
902460
» straight cover version» housing protection IP66/67
902930
7
114
255
204
239
183
320
222
304
201
114
ANIF4 320x222x114, window with 10-units
Enclosures without window» covers for wall mounting holes (inside protective area)
» hinges (flexible band)
» screws
Enclosures with window(s)*» covers for wall mounting holes (inside protective area)
» hinges (flexible band)
» screws
» DIN rail(s) with holders
» blind cover for window outlet
*) window(s) are already mounted in distribution boxes
MURAU 255x204x114, window with 4-units
enclosures straight 1 window
accessories delivered with DElta enclosures:
» straight cover version» housing protection IP54
901325
» straight cover version» housing protection IP54
913454
example
example
8
196
230
116
130 130
183204
239
255
140
201
320
222
304
140
Strobl7 schräg 10TE
201
505
520
222 140
LECH 230x130x130, window with 6-units
LOFER7 255x204x140, window with 9-units
ANIF7 320x222x140, window with 10-units
STROBL7 520x222x140, window with 10-units
enclosures sloping 1 window
» sloping cover version» housing protection IP66/67» M25 thread on top
960510
» sloping cover version» housing protection IP54
901861
» sloping cover version» housing protection IP54
913573
» sloping cover version» housing protection IP54
902471
9
Sölden schräg 28TE
520
297
503
280
165
Sölden schräg 14TE
520
297
503
280
165
Strobl 20TE
201
505
520
222 140
SÖLDEN 520x297x165, window with 14-units
STROBL 520x222x140, window with 2x10-units
SÖLDEN 520x297x165, window with 2x14-units
enclosures sloping 1 window
enclosures sloping 2 windows
» sloping cover version» housing protection IP54
902941
» sloping cover version» housing protection IP54
902522
» sloping cover version» housing protection IP54
902842
10
PCE sockets, plugs and connectors
+
pce = one supplier, many possibilities
PCE enclosures Delta
11
For additional technical information please refer to our main catalogue or visit our website at www.pcelectric.at!
cable glands M20 - M63
windowsIP54 / IP67
Protection:RCD, MCD,Neozed, ...
sockets IP44 / IP6716 - 125A
PCE offers a wide range of custom designed and configurated distribution boxes!
=
12
a
9360 72
b
c36,50
25
a
93
b b
c
7260
36,50
25
36,50
25a
93
c
72
b b b
60
ts9000g 19892
Technical characteristics:» especially compact (robust) design, made of shock-resistant polycarbonate» for distributor´s construction, O.E.M´s, panel builders, etc.» sprung-loaded window with integrated knurled screws» size of hinged window suitable for 2, 4, 5, 6, 8, 10,13,18 modules (17,5mm each) » intermediate sizes on request!» mounting frame made of shock-resistant polycarbonate with integrated gasket for flange mounting» all metal parts corrosion-resistant» IP66/67 watertight
Accessories for IP66/67:
Locking- and lead-sealing device with padlock (40 mm)
Mounting clamp for DIN-railheight = 53mm
Hinged window 2/4 modules
Hinged window 5/6/7/8/9/10/12/13 modules
Hinged window 18 modules
a [mm] b [mm] c [mm] Weight [g] pack.unit Cat.No.
5 modules 103 41,5 90 90 20 900605
6 modules 121 50,5 108 102 15 900606
7 modules 139 59,5 126 114 15 900607
8 modules 157 68,5 144 126 15 900608
9 modules 175 77,5 162 133 15 900609
10 modules 193 86,5 180 145 15 900610
12 modules 229 104,5 216 168 10 900612
13 modules 247 113,5 234 180 10 900613
a [mm] b [mm] c [mm] Weight [g] pack.unit Cat.No.
18 modules 337 105 324 245 12 900618
a [mm] b [mm] c [mm] Weight [g] pack.unit Cat.No.
2 modules 49 27 36 51 40 900602
4 modules 85 65 72 80 20 900604
hingeD winDows fuse window iP66/67
13
a
97
c
b
7260
31
27
72
b
c
b
60
a
97
31
27
9760
c b b c
72
d
a 27
31
9772
c
b b b
60
27
31
a
ti0007s
ti0207
Technical data:» especially compact design, made of shock-resistant polycarbonate» for distributor’s construction, O.E.M’s panel builders, etc. » self-closing window» size of hinged window suitable for 4, 6, 8, 9, 10, 11, 12, 13, 14, 18 modules (17,5mm each)» bearing by means of double hinges» angle of vee > 180°» mounting frame made of shock-resistant polycarbonate with integrated gasket for flange mounting» all metal parts corrosion-resistant» transport and installation protection of the window with peel back foil» integrated free position for lead seal» window holder included» Protection degree IP54
Delivery: incl. window holder (standard colour: black)Also possible to order seperately
for fit-up aid
receptacle - padlock
window holder for service works 90°
window holder for service works 180°
Examples of use for window holder:
Hinged window 4 modulesa [mm] b [mm] c [mm] Weight [g] pack.unit Cat.No.
4 modules 92 65 72 97 30 9006504
a [mm] b [mm] c [mm] d [mm] Weight [g] pack.unit Cat.No.
13 modules 253 41 73 233 233 10 9006513
14 modules 272 41 82 252 232 10 9006514
Hinged window 6/7/8/9/10/11/12 modules
a [mm] b [mm] c [mm] Weight [g] pack.unit Cat.No.
6 modules 128 51 108 127 20 9006506
7 modules 139 59,5 126 146 15 9006507
8 modules 164 69 144 155 15 9006508
9 modules 182 78 162 166 15 9006509
10 modules 200 87 180 181 10 9006510
11 modules 218 96 198 198 10 9006511
12 modules 236 105 216 207 10 9006512
Hinged window 13/14 modules
Hinged window 18 modulesa [mm] b [mm] c [mm] Weight [g] pack.unit Cat.No.
18 modules 344 105 324 299 10 9006518
window handle
hingeD winDows fuse window iP54
14
Vario connector
Terminal VC complete 1x3pPack. unit: 200
667109-1/3
Terminal VC complete 3x2pPack. unit: 200
667109-3/2
Terminal VC complete 3x2pPack. unit: 200
667119-3/2
Terminal VC Holder Snap 7Pack. unit: 50
667307-50
Terminal VC Holder Snap 16 Pack. unit: 50
667316-50
(screw 3,0x10) for DIN-rail fixing
201803-1000
Terminal VC complete 1x6pPack. unit: 200
667109-1/6
Terminal VC complete 1x6pPack. unit: 200
667119-1/6
Terminal VC complete 3x3pPack. unit: 200
667109-3/3
Terminal VC complete 1x9pPack. unit: 200
667109-1/9
Terminal VC complete 2x6pPack. unit: 200
667109-2/6
Terminal VC complete 5x2pPack. unit: 200
667109-5/2
Terminal VC complete 2x3pPack. unit: 200
667109-2/3
Terminal VC complete 2x9pPack. unit: 200
667109-2/9
Terminal VC complete 5x3pPack. unit: 200
667109-5/3
Terminal VC Holder Pin 7Pack. unit: 50
667407-50
Terminal VC Holder Pin 16 Pack. unit: 50
667416-50
(screw 3,0x10) for DIN-rail fixing
201803-1000
Terminal VC Holder Pin 34Pack. unit: 50
667434-50
Terminal VC Holder Snap 34Pack. unit: 50
667334-50
15
pc electric gmbh
PCE is a world leader in the development and production of industrial plugs and sockets with an export share of over 90%!
Since its founding in 1973 the company continued to develop and to become an international group of companies.
PCE offers a wide range of high quality products for various applications in the electrical installation sector. The range is constantly updated and current-ly includes approximately 22.000 items. In addition to our standard products PCE is able to produce customer-specific configurations on modern injec-tion molding and metal processing plants within a few days.
High level of quality (EN ISO 9001:2008 Certifica-tion), flexibility and constant innovation of products and processes are among the most important fac-tors of our successful customer-oriented strategy.Speed is top priority! Rapid delivery times and relia-bility through efficient manufacturing methods and uncomplicated order processing have been appre-ciated by our customers for years.
Continuous innovation of products and processes paired with the close cooperation with our custo-mers makes PCE a strong, worldwide partner for the professional use of industrial plugs and sockets in electrical installation!
The following subsidiaries are also production sites
PC POLSKA, Dzierzoniow, PolandPCE MERZ, Gaildorf, GermanyPCEL SRi LAnKA, Sri LankaBRAnDT GESMBH, Inzersdorf, AustriaWinKLER GMBH, Ingolstadt, Germany
pc electric gesmbh
Diesseits 145
4973 st. martin im innkreis
austria
tEl +43 7751 61220
faX +43 7751 6969
Connectionfutureto the
Zach
hube
r G
rafi
k-D
esig
n
0983
50
Vers
ion
10/2
012