dental implant systems product catalog |...

DENTAL IMPL ANT SYSTEMSPRODUCT CATALOG | 2016

1Ditron Dental. Precision, built in.

contents

GENERAL

Introduction................................................. 2

Key quality elements...................................5

Implant system............................................7

Surface treatment.......................................8

R&D............................................................10

IMPLANTS

Ultimate™ precision implant

key features.......................................14

implants matrix ...............................16

drill sequence matrix .......................17

MPI™

Key features.......................................18

Implants matrix.................................20

Drill sequence matrix........................21

Narrow implant..................................22

Short implant.....................................23

OPI™

Key features.......................................24

Implants matrix.................................26

Drill sequence matrix........................27

PROSTHETICS

Introduction............................................... 30

Healing cap.................................................32

Impression coping.....................................33

Abutments..................................................34

Multi-unit...................................................40

LOCATOR® .................................................43

SURGICAL KITS

Ditron full surgical kit...............................48

Mini surgical kit.........................................50

Surgical tube™ ..........................................52

Integral stopper kit....................................53

Tools and drills...........................................54

PACKAGING

Packaging, symbols & explanations.........60

INDEX .......................................................66

Ditron Dental. Precision, built in.2

make our precision yours.

Ditron Dental is a biomedical company devoted to the research, development and production of high end components for implant-based dental restorations.

Ditron Dental was founded on the basis of 47 years of experience in the design, production and JIT (Just-in-Time) delivery of ultra precise mission critical parts for some of the most demanding applications. Outstanding precision and exceptional quality are an essential part of our corporate D.N.A.

We focus on providing you with high end implantology solutions which are intuitively simple, safe and reliable, combined with around the clock service and support.

Our in-house team of leading clinicians, micromachining experts and quality process engineers enables us to provide you with a state-of-the-art, reliable and dependable implant system.

All our products are predesigned to surpass the most stringent quality requirements. The Ditron Dental components are manufactured in our state of the art production facility where each and every step is controlled to ensure product safety and reliability.

We hope you find this catalog informative and useful.

Product Guarantee

Ditron Dental guarantees all its products for a period of 15 years when used in accordance with the supplied Instructions for Use (IFU) and the company's protocols.


For over 45 years Ditron has been one of the leading companies in the design, production and JIT delivery of ultra precise mission critical parts. Our parts have been installed in the most extreme and challenging environments in which failure is unaccepted. With state-of-the-art technology and in-depth process control we attain production in single micron level accuracies within a zero PPM (zero defects per million parts) recorded performance. We have always strived for the highest quality in all our accomplishments.

We encourage professionalism, expertise and dedication. These fundamental capabilities coupled with an exceptional clinical team are the basis of Ditron Dental’s foundation.

We believe that a multi-discipline approach is the best catalyst for innovation. We have teamed engineers, micromachining specialists and top notch clinicians to drive our research and

development of high-end implant based solutions. Our goal is to allow reconstruction as close as possible to natural dentition and optimize the long term success of the dental implant system. Ditron Dental provides patients with a safe and reliable solution to improve their well-being in both esthetical and functional terms.

We offer our customers a comprehensive portfolio of implants and prosthetic components dedicated to implant dentistry. Ditron Dental's Molecular Precision Implant System ™ offers outstanding simplicity, reliable function and exceptional flexibility for high-quality and esthetic restorations.

precision, built in.


operators' training

As dental product safety and reliability are at the forefront of all our activities, our quality management system controls our in-house implants production process. From raw material to clean room packaging, all production stages are made in-house in our own state-of-the-art facility. Each and every step is closely monitored and constantly validated to ensure product safety and reliability.

This advanced quality assurance system aims to assure that our performance of zero PPM (zero defects per million parts) proven capability will be sustained. An integral part of this system is the operators’ training and each and every one of them undergoes an elementary dental implantology course to heighten the responsibility level which is expected in the production of dental implants.

Aerospace accuracies integrated with biomechanical excellence and stringent medical production procedures

quality management systemkey qualityelements


certificationcleanroom

All implants and prosthetics undergo a comprehensive internal testing and inspection process, which fully complies and furthermore exceeds all applicable regulations and standards.

Prior to cleanroom packaging, the implants and instruments are mechanically washed and disinfected in accordance with the highest standards. The implants are then delivered to the cleanroom for packaging.

These facilities are ISO 14644-1 (class 7) compliant, i.e. for particle counts of less than 1 per million/m3.

Ditron Dental is certified under EN ISO 9001:2008, SN EN ISO 13485:2012 MDD 93/42/EEC Annex II and is authorized to use the CE mark on all Ditron Dental products.All products are 510 (k) cleared by the FDA.

inspection

SIISO 13485:

2003

CERT

IFIED

MEDICAL DEVICES QMS

THE STANDARDS INSTITUTION OF ISRAEL


Molecular Precision Implant System™

The Molecular Precision Implant System™ production process is specifically designed to tightly control these 3 key elements and in turn provide:

• Maximal rotational precision - This means that the implant position recorded by the impression coping will be accurately reproduced on the laboratory model, thereby ensuring that the final restoration will be aligned exactly as intended. In addition, the risk of loosening abutment screw is greatly reduced.

• Minimal microgap - "Microgap" between the implant platform and the abutment is kept to an absolute minimum. This has the clinical benefit of reducing the possibility of bacterial contamination and improving the long term bone level stability.

The Molecular Precision Implant System™ components are all designed in-house with the highest attention to safety, reliability and simplicity. Our multidisciplinary research & development team is equipped with the latest 3D CAD/CAM design capabilities.

Standardized handling

All Ditron Dental implants and abutments share a standard internal hexagonal locking connection, so that the ideal combination may be assembled to address each specific case. This is the optimal basis for achieving a strong, functioning and esthetic final restoration.

Implant - abutment connection

We at Ditron Dental believe that the esthetics and long-term success of the final restoration are greatly influenced by the design of the implant-abutment connection. The well trusted design of the internal hexagon connection is further strengthened by our MolecuLock™ concept which incorporates very tight manufacturing tolerances in 3 critical parameters – Mating Tolerances, Roundness and Surface Roughness.


All Ditron Dental implants feature a blasted and thermally acid-etched endosseous surface. The micro and macro structure achieved by this process facilitates an accelerated osseointegration of the MPITM implants.

To ensure repeatability, each and every implant is individually blasted with abrasive particles in an automated system which controls the speed, direction, pressure and size of the particles that collide with the implant. This ensures that each and every implant will undergo the same process and demonstrate the same excellent surface characteristics.

The excellent implant surface morphology is then created by a controlled thermal-acid-etching process. Finally, a high purity cleaning procedure is introduced to ensure that no foreign particles remain on the implant's surface. The cleanliness level and purity of our implants are routinely checked by XPS measurements . (see tables 1-2).

Molecular Precision™ Surface Treatment

Table 1 XPS element composition, Atomic %

Table 2 Ti Oxide thickness (nm) – lot 531

Methodology

The elemental composition and atomic concentrations of the surface treatment were calculated using elemental sensitivity factors without applying any standardization procedure.

Methodology

The thickness of the Titanium Oxide layer was calculated from the high resolution energy spectra of Ti2p electrons.

Lot

MPI TM lot 531

Point

1down

2 up

Point

D, nm

1 down 500µm PE150eV

6.7

3 down 500µm PE150eV

6.8

N

1.4

0

C

26.7

28.3

O

51.33

51.6

V

0.4

1.1

Ti

16.8

16.2

Al

2.4

2.9

Atomic force microscopy (AFM) surface topography clearly demonstrate the improved Bone to Implant Contact (BIC) and the improved mechanical anchorage.

9Ditron Dental. Precision, built in.Ditron Dental. Precision, built in.

The micro and macro structure achieved by our process facilitates an accelerated osseointegration of the MPITM implants.

Ditron Dental. Precision, built in.


We aim to provide the best dental implant solutions, and are continuously involved in science based research and development. We work with leading universities both in Israel and overseas. One leading example is our involvement in a novel gene based Peri-implantitis research: "Genes Associated with Alveolar Bone Loss Around Implants and Teeth as a Result of Bacteria Induced Inflammation".For this research, Ditron Dental was challenged to create the smallest fully functional dental implant in the world.This 50 micron diameter implant has allowed researchers to develop, for the first time, an innovative murine model for bacteria-induced alveolar-bone-loss around Titanium implants. Such a model can challenge the hypothesis that peri-implantitis and periodontitis are diverse phenotype and genotype conditions that share a common genetic background.

Scanning electron microscope (SEM) imagery showing the Ditron micro dental implant compared to a hypodermic needle.

Histology of the Ditron's implant newly formed bone mainly colonized the pores in the vicinity of pre-existing cortical bone. New bone tissue could be observed.

researchand development

Actual implant size in catalog magnified X25 and showed side by side to a 1 Euro coin


Tensile strength

Elongation

Oxygen content

Biocompatibility

860 MPa minimum

10%

0.13% maximum

Excellent

Advantages

Extremely high strength/weight ratio

Improved ductility and fracture toughness under static and dynamic loads

Direct structural and functional connection between bone and implant surface

The Ditron Dental's implant system components are made of biocompatible medical Grade 23 Titanium alloy. The specific Titanium alloy used by Ditron Dental was chosen due to its superior properties including high strength to weight ratio, very high corrosion resistance, high modulus of elasticity and its excellent osseointegration capabilities.

Ti Grade 23characteristics Properties

IMPLANTS


• Placing micro-threads on the implant neck greatly increases the ability of an implant to resist axial loads, and the mechanical stimulus provided by the micro-threads helps to preserve the peri-implant marginal bone.

• The UltimateTM micro-threads exercise appropriate biomechanical stimulation of cortical bone, stimulate the tropism and enhance the speed and quality of osseointegration.

Bone Platform Switching

Micro Thread

Helical Apico-coronal Slots

precisionimplant

ultimateTM

• Makes the implant self tapping and reduces resistance to bone insertion.• Allows the recovery of medullary bone fragments mixed with growth factors’

enriched blood.

• The particular morphology of the collar (Reverse Conical Neck - RCN) increases the implant contact surface area with the bone and preserves a greater proportion of bone and periosteum.

• The taper and concavity of the collar guarantee a gentle contact and reduced stress on the crestal cortical bone preventing undesired vascular compression.

• By inserting an UltimateTM implant, 5.57 mm3 of bone will be saved as compared to a non RCN implant.

• The Reverse Conical Neck provides greater implant stability and better distribution of the stress to bone implant interface.


Implant Profile• The truncated-cone profile reproduces root-form morphology of the

tooth root and offers significant advantages in many critical situations. • Platform Switching - The prosthetic connection leaves constant

horizontal progressive space for the biological width, limits bone resorption, stabilizes the soft tissue and ensures excellent papillary aesthetics.

• The modular convergent tapered coronal portion of the implant offers greater flexibility to implant placement.

• Al2O3 surface blasting and high purity double acid etching cleaning procedures attain superior SEM and XPS results.

Cutting Apex Edge

Progressive Thread • The thread with the concave profile has an apical-coronal incremental

thickness DSST (Double Stressless Sharp Thread) which together with a descending concave profile between the threads, generates a gentle and progressive vertical and horizontal bone compaction.

• Provides self drilling and self tapping capacity to the implant. • Offers the possibility of optimizing implant insertion angulation.


ult07420 ult08420 ult10420 ult11420 ult13420 ult16420

cat. no. cat. no. cat. no. cat. no. cat. no. cat. no.8mm7mmLength 10mm 11.5mm 13mm 16mm

SCR-1000 - A sterile Titanium cover screw for two stage surgical procedure is included in each implant packaging. Hand tighten with the 1.25 hex driver. For use during submerged healing. Recommended tightening torque 20 Ncm.

ult07375 ult08375 ult10375 ult11375 ult13375 ult16375ult Ø 3.75 mm

ult Ø 4.2 mm



1.8

L

3.75

3.21.85

2.45HEX

ultimateTM

matrix

L

1.8

HEX2.45

4.203.75

1.853.2

1.8

HEX2.45

2.53.8

54

1.8

HEX2.45

64.6

3.24.4


Drill sequence by bone typeAn additional 1 mm must be added to the length of the drill to account for the angled cutting tip.

D-I, D-II Dense bone considerationsCountersink should be used if the standard dense bone protocol is not sufficient to fully seat the implant without exceeding the recommended maximum insertion torque of max. 60Ncm for implant Ø3.75mm and above. Do not exceed max. 45Ncm for implants diameter lower than 3.75mm.

Procedure recommended by Ditron Dental and cannot replace the judgment and the experience of the surgeon.

Drill Length *

Drill

Len

gth

*

Drill Length *I,IIBone type RPM III,IV RPM

ult Ø 3.75 mm

Full Implant LengthFull Implant Length2/3 Implant Length1/3 Implant Length

Full Implant LengthFull Implant Length1/2 Implant Length

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mm

Ø 1.9 mmØ 2.0 mmØ 2.8 mm

1200-1500900-1200500- 700200- 400

1200-1500900-1200500- 700

ult Ø 4.2 mm

1200-1500900-1200500- 700400- 700200- 400

1200-1500900-1200500- 700400- 700

Full Implant LengthFull Implant LengthFull Implant Length2/3 Implant Length1/3 Implant Length

Full Implant LengthFull Implant Length1/2 Implant Length1/3 Implant Length

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mm

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mm

ult Ø 5.0 mm

1200-1500900-1200500- 700400- 700400- 600200- 400

1200-1500900-1200500- 700400- 700400- 600

Full Implant LengthFull Implant LengthFull Implant LengthFull Implant Length2/3 Implant Length1/3 Implant Length

Full Implant LengthFull Implant LengthFull Implant Length1/2 Implant Length1/3 Implant Length

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mmØ 4.5 mm


ult Ø 6.0 mm

1200-1500900-1200500- 700400- 700400- 600400- 600300- 500200- 400

1200-1500900-1200500- 700400- 700400- 600400- 600300- 500

Full Implant LengthFull Implant LengthFull Implant LengthFull Implant LengthFull Implant LengthFull Implant Length1/2 Implant Length1/3 Implant Length

Full Implant LengthFull Implant LengthFull Implant LengthFull Implant LengthFull Implant Length1/2 Implant Length1/3 Implant Length

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mmØ 4.5 mmØ 5.0 mmØ 5.5 mm

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mmØ 4.5 mmØ 5.0 mm

drill sequence


• Surface blasting and double acid etching. • High purity cleaning procedures. • Superior EDS and XPS results.

MolecuLockTM

surface treatment

implant body

molecular precision

implant

mpi™

• High initial stability even in compromised bone situations.

• Expanding tapered implant body with double-thread self-tapping design condenses bone gradually to enhance primary stability.

• The insertion rate of the Molecular Precision™ implants are 2.2mm per revolution.

• Seal between implant and abutment.• Biomechanical design and 1 micron level

production to reduce micro gaps and micro movement risks.


• Subcrestal placement including a beveled collar shifting the implant-abutment junction inward, in order to achieve platform-switching configuration.

• Platform switching generates a perfect environment for the soft-tissue growth and helps prevent bone resorption.

restorative platform

wide rounded apex

• Apex with self-tapping drilling blades enables smaller osteotomy.

• The self-tapping function also supports a precise adaptation of the implant thread to the bone, thus providing optimal primary stability.

assisted osseointegration • Our unique Spherical Helix Chamber forms a

localized infrastructure that serves as a scaffold for promoting wound healing and bone formation from existing osteoblasts.

• Improved ease of insertion and allowing mild direction refinement during the initial stages of insertion.

apex design


cat. no. mpi08420 mpi10420 mpi11420 mpi13420 mpi16420





8mmLength 10mm 11.5mm 13mm 16mm

SCR-1000 - A sterile Titanium cover screw for two stage surgical procedure is included in each implant packaging. Hand tighten with the 1.25 hex driver. For use during submerged healing. Recommended tightening torque 20 Ncm.

mpi Ø 3.75 mm

mpi Ø 4.2 mm

mpi Ø 5.0 mm

mpi Ø 6.0 mm

mpi™ matrix

0.8

0.8

0.8

0.8

mpi Ø 3.50 mm2.45HEX

3.50

2.71.6

0.8


mpi Ø 3.75 mm

mpi Ø 4.2 mm

mpi Ø 5.0 mm

mpi Ø 6.0 mm

I,IIBone type RPM III,IV RPM

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mm

Ø 1.9 mmØ 2.0 mmØ 2.8 mm

1200-1500900-1200500- 700200- 400

1200-1500900-1200500- 700

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mm

Ø 1.9 mmØ 2.0 mmØ 2.8 mm

1200-1500900-1200500- 700200- 400

1200-1500900-1200500- 700

1200-1500900-1200500- 700400- 700200- 400

1200-1500900-1200500- 700400- 700


Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mm

1200-1500900-1200500- 700400- 700400- 600200- 400

1200-1500900-1200500- 700400- 700400- 600

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mmØ 4.5 mm


1200-1500900-1200500- 700400- 700400- 600400- 600300- 500200- 400

1200-1500900-1200500- 700400- 700400- 600400- 600300- 500

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mmØ 4.5 mmØ 5.0 mmØ 5.5 mm

Ø 1.9 mmØ 2.0 mmØ 2.8 mmØ 3.2 mmØ 3.8 mmØ 4.5 mmØ 5.0 mm

drill sequence

mpi Ø 3.50 mm

Drill sequence by bone typeAn additional 1 mm must be added to the length of the drill to account for the angled cutting tip.

D-I, D-II Dense bone considerationsCountersink should be used if the standard dense bone protocol is not sufficient to fully seat the implant without exceeding the recommended maximum insertion torque of max. 60Ncm for implant Ø3.75mm and above. Do not exceed max. 45Ncm for implants diameter lower than 3.75mm.

Procedure recommended by Ditron Dental and cannot replace the judgment and the experience of the surgeon.


mpi™

narrow ø 3.3mm

* The above testing reveals excellent biomechanical permanence in both static and dynamic loads.

Comingsoon!The newest member of the Molecular Precision Implant line is the 3.3 mm MPITM implant. This revolutionary narrow implant utilizes a standard 2.45 mm internal hex allowing the use of the entire Ditron prosthetic range. From 3.3 mm diameter up to 6.0 mm, the same 2.45 mm connection is used without compromising functionality nor safety.

We have integrated our 47 years of Aerospace micro-machining and dental know how into the design of the 3.3 mm narrow implant design. To assure mechanical integrity and long term safety we conducted extensive mechanical stress testing. The following testing was conducted in the Technion (among the world’s top ten science and technology research universities) research labs:

• Static - Average static load test showed an average of 773N

• Dynamic - 5 million cycles fatigue limit of 320N

• Maximum - Maximum endured load of 1072N

3.300.8

L

2.51.35

2.45HEX

3.300.8

L

2.51.35

2.45HEX

3.300.8

L

2.51.35

2.45HEX


mpi™

shortL 6.0 mm

The Ditron MPITM short implant was designed to allow the clinician to avoid extensive augmentation procedures in patients with insufficient vertical bone for conventional implants.

The Ditron short MPITM implant is available in 4.2, 5.0 and 6.0 mm diameters.

The Ditron short MPITM implants are intended for subcrestal placement. The implants' beveled collar shifts the implant-abutment junction inward in order to achieve platform-switching configuration. Platform switching generates a perfect environment for the soft-tissue growth and helps prevent bone resorption and improved esthetical results.

mpi06420 mpi06500 mpi06600cat. no.

* All Ditron drills include a 6mm depth indication marker

Comingsoon!

6 mm8 mm10 mm11.5 mm

13 mm

16 mm

standard

4.200.8

3.62.05

2.45HEX

50.8

6

4.42.9

2.45HEX

60.8

6

5.353.7

2.45HEX

4.200.8

3.62.05

2.45HEX

50.8

6

4.42.9

2.45HEX

60.8

6

5.353.7

2.45HEX


• Self tapping one piece implant with an integral abutment designed for one stage surgical procedure and cemented restorations.

• Immediate function.• Designed for narrow ridges, solves tight

spacing problems.• Ideal replacements for laterals in the maxilla

and incisors in the mandible.

• Thread design profile condenses bone gradually to enhance primary stability.

• The insertion rate of the opi™ implants are 1.5mm per revolution.

• Sharp and precise bone cutting.

• Apex with self-tapping drilling blades enables smaller osteotomy.

• The self-tapping function also supports a precise adaptation of the implant thread to the bone, thus providing optimal primary stability.

• Improved ease of insertion and allows directional adjustments during the initial stages of insertion.

key design features

single thread design

narrow apex design

3.0

one-pieceimplant

opi™


• Polished Titanium abutment.• Beveled collar generates a perfect environment

for the soft- tissue growth and helps prevent bone resorption.

integrated restorative abutment

implant body• High initial stability even in compromised bone

situations.• Expanding tapered implant body.• Available in two diameters: 3.0mm and 3.3mm and

in varying heights of 10mm, 11.5mm, 13mm and 16mm.

selective surface treatment• Selective surface blasting and double acid etching.• Uncompromising surface cleanliness.• Superior EDS and XPS results.

120° Self cutting apex to improve implant insertioncutting apex design


opi matrix™

cat. no. opi1033 opi1133 opi1333 opi1633

opi Ø 3.0 mm

opi Ø 3.3 mm

Length 10mm 11.5mm 13mm 16mm

Ø 3.0

Ø 3.3

3.0

3.0

6.20

6.20

Ø 1.2

Ø 1.4

cat. no. opi1030 opi1130 opi1330 opi1630


Every OPITM implant is provided with a plastic carrier for easy handling.

drill sequenceI,II RPM III,IV RPM

Ø 1.9 mmØ 2.0 mmØ 2.5 mm

Ø 1.9 mmØ 2.0 mm

1200-1500900-1200700- 900

1200-1500900-1200

1200-1500900-1200700- 900400- 700

1200-1500900-1200700- 900

Ø 1.9 mmØ 2.0 mmØ 2.5 mmØ 2.8 mm

Ø 1.9 mmØ 2.0 mmØ 2.5 mm

Bone type

opi Ø 3.0 mm

opi Ø 3.3 mm

TSQK-200340opiTM short hand & ratchet keyexternal square connectionlength: 21mm

PROSTHETICS


Comprehensive restorative solutions Ditron Dental's internal hex prosthetics portfolio provides solutions for all indications. From single unit restoration to full arch restoration, one or two stage, immediate or delayed loading procedures you will find an implant/prosthetic combination that addresses the clinical situation and meets the best needs of the patient.

Compatibility Abutments and components fit all standard hexagonal locking systems. Nevertheless, we highly recommend using Ditron Dental's prosthetic parts to ensure the perfect connection between implant & abutment (MolecuLock™ ).

QualityPrecision turning and milling ensures that all abutments are delivered with the highest quality and precision. All abutments are delivered with an abutment screw.

StrengthAll Ditron’s abutments are manufactured from biocompatible medical Grade 23 Titanium alloy that has been tested for strength and durability.

prosthetics


key to abbreviations

Abutment screw

Cement retained abutment

Analog

Ball attachment

Casting abutments CrCo base

Casting abutments plastic

Casting abutments Titanium base

Healing cap

Locator abutment

Plastic sleeve

Cover screw

Screw retained abutments

Screw for SRA

Temporary abutment

Transfer

Transfer screw

Multi-unit abutments

Multi-unit parts

Multi-unit screw

ABTS

ABT

AN

BAL

CAC

CAP

CAT

HC

LOCABT

PLS

SCR

SRA

SRAS

TAB

TR

TRS

MUA

MUP

MUS


Wide Ø 6.0 m

m

The anatomic healing caps are designed to sculpt a proper emergence profile for the permanent prosthesis and prevent extra soft tissue trauma.

To ensure the length of the implant above the gum tissue, the anatomic healing caps are available in:

Standard platform: diameter 4.6 mm, heights 2-7 mm.

Narrow platform: diameter 3.8 mm, heights 3, 5 mm.

Wide platform: diameter 6 mm, heights 3, 5 mm.

anatomic healing cap HC-1033

HC-1035

HC-1023

HC-1025

HC-1012

HC-1013

HC-1014

HC-1015

HC-1016

HC-1017

2 mm 3 mm

3 mm

5 mm

5 mm

3 mm

4 mm

5 mm

6 mm

7 mm

Standard Ø 4.6 mm

Narrow

Ø 3.8 mm

Ø 4.6 mm Ø 3.8 mm

Ø 6.0 mm


TransferOpen / Close Tray

Designed to transfer the implant’s position and hex orientation as well as the soft tissue profile.Ditron Dental's transfers are available for both closed or open tray, transfer impression technique. The transfer is designed for a perfect mate to the corresponding implant analog. All transfers include 16 mm screw (TRS-3050). Long screw 24 mm (TRS-3040) is sold separately.

Analog

Tight accuracies are kept in all impression coping parts to ensure that the implant position recorded by the impression coping will be accurately reproduced on the laboratory model and final restoration will be aligned exactly as intended. All analogs and transfers are made from high grade Stainless Steel 316.Two flat surfaces allow a controlled tightening of the analog and transfer. One platform for all indications.

impression coping

TR-3010

TR-3020

TR-3030

TRS-3040

TRS-3050

AN-2010

ONE-2011one piece analog

Ø 4.5 mm

Ø 4.5 mm

Ø 3.8 mm

12 mm

24 mm

16 mm

8 mm

12 mm


straight abutments & anatomic straight abutments

The abutment comes in three configurations:

• Standard platform - available in 8.5 mm height, 11.5 mm height.

• Narrow – for limited prosthetic space, available in 6 mm height, 8.5 mm height.

• Anatomic - shoulder elevated 2 & 4 mm above the bone, appropriate for thick gums or when the implant is very deep.

Abutment Screw Short (8.3 mm)• Low profile screw head.• Utilize the 1.25 mm hex driver.• Packaged with all angulated abutments.• Final torque 30 Ncm.• Titanium Alloy - Ti6Al4V.

ABT - 6010

ABT - 6020

ABT - 6030

ABT - 6040

ABT - 6050 - 2

ABT - 6050 - 4

Abutment Screw Long (9.5 mm)• High profile screw head.• Utilize the 1.25 mm hex driver.• Packaged with all straight abutments.• Final torque 30 Ncm.• Titanium Alloy - Ti6Al4V.

Titanium straight abutment is a supporting structure to sustain lateral or horizontal pressure as an anchorage for a single tooth or more.

Every Ditron Dental abutment includes a short screw. Additional screws are sold separately.

ABTS-2000 ABTS-2001

Standard Ø 4.5 mm

Narrow

Ø 3.8 mm

Anatomic Ø 5.6 m

m

11.5 mm

8.5 mm

8.5 mm

6 mm

2 mm

4 mm


angulated abutments 15˚& 25˚• Single and multi-unit implant restorations.

• Cement retained.

• Two collar heights, based on the implant platform and system.

• Single and multi-unit implant restorations.• Cement retained.• The abutment is designed with a concave profile for denser soft

tissue formation. • Scalloped margin that outlines natural soft tissue contours with

two collar heights, based on the implant platform and system.

anatomic angulatedabutments 15˚& 25˚

ABT-4015–111.5 mm 15˚

ABT-4015–1B11.5 mm 15˚ ABT-5025-3

25˚ Shoulder 3mmABT-5015–315˚ Shoulder 3mm

ABT-40258.5 mm 25˚

ABT-4025-111.5 mm 25˚

ABT-4025-1B11.5 mm 25˚

ABT-40158.5 mm 15˚

ABT-5025-1 25˚ Shoulder 1mm

ABT-5015-115˚ Shoulder 1mm

The “functional height” of all abutments is measured from the platform connection upwards and does not include the hexagonal connection.

The ABT-4015-1 and ABT-4025-1 are now available in two positions - standard and a new B position. The new B position (ABT-4015-1B and ABT-4025-1B) has a 30 degrees offset in its hexagonal base positioning. These two options provide a 12 positioning choice of the abutment placement instead of the 6 possible positions commonly used today.

all shoulder diameters = Ø4.8mm all shoulder diameters = Ø4.7mm

8 mm

10 mm

8 mm

10 mm


temporaryabutments

• Temporary non-hex abutments. • For immediate loading procedure on temporary bridges. • No cement required.• Available in five heights: 1,2,3,5 and 7 mm. • “Snap” connected by a plastic sleeve to the bridge. • Provided with a set of 3 different retaining force plastic

sleeves - soft, standard and hard.

TAB-7008Plastic Sleeve SetTAB-7001

TAB-7002

TAB-7003

TAB-7005

TAB-7007

hard

standard

soft

1.0 mm

2.0 mm

3.0 mm

5.0 mm

7.0 mm


casting abutments • Casting Abutments are ideal for customized prosthetic restorations.• Titanium Base enables precise implant-abutment connection. • Two types of casting abutments bases are available: Hexagonal - Intended to be used for custom casting prosthetic

restorations on single implant or multiple implants. Cylindrical - Intended to be used only for custom casting prosthetic restorations on multiple implant prosthetic restoration.

CAT-H10STTitanium Base Casting Abutment - HexagonLength 11mmHeight 1.0mm

CAC-H10STCoCr Base Casting Abutment - HexagonLength 11mmHeight 1.0mm

CAT-C10STTitanium Base Casting Abutment - CylinderLength 11mmHeight 1.0mm

CAC-C10STCoCr Base Casting Abutment - CylinderLength 11mmHeight 1.0mm

CAP-H10STStraight Casting Esthetic Abutment - Plastic – HexagonLength 10.5mmHeight 1.0mm



CAP-H1015Angulated 15° Casting Esthetic Abutment - Plastic – HexagonLength 9.9mmHeight 1.0mm






CAS-H10STCasting AbutmentPlastic – HexagonLength 15.2mmHeight 1.0mm

CAS-C10STCasting AbutmentPlastic - CylinderLength 15.2mmHeight 1.0mm


screw retained abutmentsScrew Titanium abutment is a supporting structure to sustain lateral or horizontal pressure as an anchorage for single tooth or more (bridge).

SRAS-8005-1

SRAS-8015-1

SRAS-8025-1

SRA-8030sleeve - burnout plastic



SRA-80050.5 mm shoulder



8.5 mm

3.5 mm

8.5 mm

3.5 mm

8.5 mm

3.5 mm

• Use 30 Ncm to close the abutment screw.

• SRA screws are also sold

separately.

• Package contains abutment and matching screw.

hexagonal hex

conical hex

round hex

shoulder


straight multi-unitabutments • Multiple-unit restorations.• Screw-retained.• Both removable and fixed overdenture bar

solutions are available.• Available in 5 heights 1, 2, 3, 4, 5mm.

MUA-10ST1.0mm shoulder





MUP-9140Close tray transfer

MUP-9141Open tray transfer

MUS-9150Open tray

screw

MUP-9137Analog

MUS-9170 Titanium

screw

MUP-9160Temporary abutment

SRA-8131 Sleeve

burnout plastic

MUP-9180Cylindered healing cap

MUP-9181 Conical

healing cap

MUB-9237 Ball screw

TMUA-200350Straight Multi-Unit hand & ratchet key

4.80

shoulder


angulated multi-unit abutments

• Innovative solution – Low profile enables exceptional aesthetics in both edentulous and partially dentate arches.

• Simplified work flow – in both mandibular and maxilla challenging implant angles.

• Comprehensive restorative solution – • Angulated (17° & 30°) • Two collar heights • Superior quality and strength Titanium alloy. • Final torque: 30 Ncm

multi-unit kit comes with:• pre-mounted carrier (cat. no. MUT-001) • pre-mounted abutment screw (cat. no. MUAS-2002)

angled multi-unit abutmentsavailable in a variety of sizes and angles for difficult to restore cases

45° conical connectionprovides maximum angulation correction to create a passive prosthetic fit

low profileabutment emergence profiles seat easily in shallow or deep tissue without the need for additional remodeling

sculpted designprovides optimal soft tissue contouring with a wide variety of collar heights

retained abutment screwfor one-handed delivery of angled abutments 1.25mm Hex Driver

The 30° multi-unit abutment allows an insertion path of up to 90° divergence.

90° 64°

The 17° multi-unit abutment allows an insertion path of up to 64° divergence.


MUA 03303.0 mm collar height

30° Angulation

3.0 mm


30° Angulation

4.0 mm


17° Angulation

3.0 mm


17° Angulation

2.0 mm

MUP-9140Close tray transfer

MUP-9141Open tray transfer

MUS-9150Open tray

screw

MUP-9137Analog

MUS-9170 Titanium

screw

MUP-9160Temporary abutment

SRA-8131 Sleeve

burnout plastic

MUP-9180Cylindered healing cap

MUP-9181 Conical

healing cap

MUB-9237 Ball screw


L

ball attachments• Titanium ball abutment for overdenture restoration.• Allows for misangulation between implants.• Silicon caps are available in 6 levels of retention.• Available in 6 heights 0.5 – 6.0 mm.• Each part sold separately.• Silicon caps: package contains 2 units.

BAL-10005BAL-MCMetal Cap Housing

BAL-10020BAL-SCHSilicon Cap Hard

BAL-10030BAL-SCNSilicon Cap Normal

BAL-10040BAL-SCSSilicon Cap Soft

BAL-DSKPlastic Disk BAL-10050

BAL-10060

0.5 mm

2.0 mm

3.0 mm

4.0 mm

5.0 mm

6.0 mm


LOCATOR®

overdenture restoration attachment retained

The LOCATOR is a self-aligning attachment to combat the damage done by the improper seating of overdentures.

The LOCATOR® overdenture attachment features a unique patented pivoting technology, which sets it apart from all other overdenture attachments.Easy to insert and remove by your patients, LOCATOR attachments are designed with customizable levels of retention and a low vertical profile. Most important, however, is its innovative

Locator® is a registered trademark of Zest IP Holding, LLC

ability to pivot, which increases the attachment’s resiliency and tolerance for the high mastication forces an attachment must withstand, allows it to compensate for the path of insertion even with up to 40˚ of divergence between implants, while providing exceptional durability. This patented pivoting action, along with the attachment’s self-aligning design, also provides ease of seating the denture by the patient.

Indications:• Fully edentulous arch.• Extensive bone or soft tissue loss.• Compromised patient manual dexterity.• Necessity for soft tissue support.• Phonetic concerns.• Implant placed too far posteriorly to connect

with a bar.• Allows for misangulation of up to 40˚ between

two implants.

ALocAbt_h0 ALocAbt_h1.0mmALocAbt_h2.5mmALocAbt_h3.5mmALocAbt_h4.5mmALocAbt_h5.5mmALocAbt_h6.5mm

PLocAbt_h0 PLocAbt_h1.0mmPLocAbt_h2.5mmPLocAbt_h3.5mmPLocAbt_h4.5mmPLocAbt_h5.5mmPLocAbt_h6.5mm

3.86 mm

1.78 mm

H

Locator kit 0˚ - 10˚ Locator kit 10˚ - 20˚

1.5 Ibs 3 Ibs 5 Ibs 1 Ibs 2 Ibs 4 Ibs


LOCATOR TOOLS

Core tool that contains 3 tools in 1. This convenient tool is used to carry and place the LOCATOR abutment, remove the LOCATOR male, and insert the male into the LOCATOR denture cap. Insert drivers for various types of torque wrenches are available to achieve 30 Ncm of torque.

The LOCATOR overdenture attachment system

comes with options of LOCATOR males or extended range males that allow you to restore non-parallel implants.Locator males allow for insertion of the overdenture with up to 20° of divergence between implants and are available with 1.5, 3 or 5 lbs of retention forces.Extended range males allow for insertion of the overdenture with up to an extensive 40° of divergence between implants and are available with 0, 1, 2 or 4 lbs. of retention forces.

Locator kit includes: Titanium abutment, 3 plastic caps, spacer and metal housing.

LocKey LocatorCore Tool(Male Removal, Male Seating and Abt. Driver)

Locator kit 0˚ - 10˚ Locator kit 10˚ - 20˚

SURGICAL KITS


full surgical kit

Ditron Dental's surgical kit is designed for all procedures.

The kit contains sockets for the drills, drivers, ratchet wrench and spare sockets for any extra tools required by the practitioner.

The kit includes color coded external irrigation drills for a safe procedure.

* Instruments are also sold separately.

cat. no. FSBOX-001


Parallel pin TPP-200330

Short handkey 1.25THSS-200210

Long handkey 1.25THSL-200220

Twist Drill 5.0DRT50-300450

Marking Drill 1.9 DRM19-300419

Pilot Drill 2.0DRP20-300420



Twist Drill 3.2 DRT32-300432



Drill extenderDREX-300500

CountersinkstandardDRCS-300510

CountersinkwideDRCW-300520

Short motor insertion toolTMAS-200250

Long motor insertion toolTMAL-200260

Long hand & ratchet keyTHKL-200300

Short hand & ratchet keyTHKS-200290

Short ratchetkey 1.25TRAS-200230

Long motor adaptorTMAL-200280

Short motor adaptorTMAS-200270

kit contents

Long ratchet key 1.25TRAL-200240

Ratchet wrenchRW-200311

Depth probeTDP-200320


mini surgical kit

Ditron Dental’s mini surgical kit has a compact and efficient design for a complete range of procedures.

The kit includes color coded external irrigation drills for a safe procedure.

* Instruments are also sold separately.

cat. no. MSBOX-002


Marking Drill 1.9 DRM19-300419




Twist Drill 3.2 DRT32-300432


Drill extenderDREX-300500

CountersinkstandardDRCS-300510

Short motor insertion toolTMAS-200250

Long motor insertion toolTMAL-200260

Long hand & ratchet keyTHKL-200300

Short hand & ratchet keyTHKS-200290

Short ratchetkey 1.25TRAS-200230

Long motor adaptorTMAL-200280

Short motor adaptorTMAS-200270

Long ratchet key 1.25TRAL-200240

mini surgical kit contents

Ratchet wrenchRW-200311


Surgical tube Proprietary patent pending surgical tube which delivers all your surgical essentials at the palm of your hand. This autoclavable aerospace grade stainless-steel tray has 3 parts: • Cover tray/lid• Mid-tray with ratchet wrench and 7 silicon inlets securely hold additional

drills and tools • Base to be used as a Depan-Dish


Long Hand & Ratchet KeyTHKL-200300

Built in Depan-Dish

Short Ratchet WrenchSRW-200312



Long Ratchet Key 1.25TRAL-200240

Marking Drill 1.9DRM19-300419


cat. no. MMBOX-003


The Ditron integral stopper kit is designed to streamline the clinician's drilling process. Each drill contains an integral stopper which prevents over-drilling and eliminates the need to carefully follow drill depth markings while enhancing procedure safety and avoiding possible drill depth errors.

• The Ditron kit contains a separate drill for each diameter and length of implants.

• All drills are externally irrigated, intended for multiple use and are color-coded.

For all drills an additional 1.0 mm must be added to length of the drill to account the cutting tip

Ditron integral stopper kit

L*/Ø

L6.0 mm

L8.0 mm

L10.0 mm

L11.5 mm

L13.0 mm

DPIS-200L6

DPIS-200L8

DPIS-200L10

DPIS-200L11

DPIS-200L13

Ø2.0 mm

DRIS-250L6

DRIS-250L8

DRIS-250L10

DRIS-250L11

DRIS-250L13

Ø2.5 mm

DRIS-280L6

DRIS-280L8

DRIS-280L10

DRIS-280L11

DRIS-280L13

Ø2.8 mm

DRIS-320L6

DRIS-320L8

DRIS-320L10

DRIS-320L11

DRIS-320L13

Ø3.2 mm

DRIS-380L6

DRIS-380L8

DRIS-380L10

DRIS-380L11

DRIS-380L13

Ø3.8 mm

DRIS-450L6

DRIS-450L8

DRIS-450L10

DRIS-450L11

DRIS-450L13

Ø4.5 mm cat. no.

cat. no. DISKIT


TMAS-200250Short motor insertion toolInt. hex. connectionlength: 23 mmMaterial: Stainless Steel

TMAL-200260Long motor insertion toolInt. hex. connectionlength: 26.5 mmMaterial: Stainless Steel

implant insertion tools

THKL & THKS

The Ditron implant new insertion tool provides a comprehensive solution to all your clinical needs during the implantation stage.The tool allows a hand insertion and a ratchet connection. The tool’s 2.45 mm connects to the internal hexagon of the implant while providing a visual indication to the hex positioning. We have also added a conical 1.25 mm connection which allows a safe placement of cover screw or healing cap.

Ratchet connection

Hand insertion tool

Internal hex position indicator

2.45mm implant connection

1.25mm cover screw connection

THKL-200300Long hand & ratchet insertion toolInt. hex. connectionlength: 29 mmMaterial: Stainless Steel

THKS-200290Short hand & ratchet insertion tool Int. hex. connectionlength: 26 mmMaterial: Stainless Steel

• Specifically designed to ensure secure implant placement in osteotomy and easy release of tool to prevent trauma.

• 3 insertion options: hand key, ratchet key and motor key. Hand and ratchet tools combined into one simple tool.

• All tools include a clear visual indication of the hexagonal location of the implant.

• 2.45 mm standard connection.


THSS-200210Short hand key for 1.25 mm hexDimensions: length - 22 mmMaterial: Stainless Steel

THSL-200220Long hand key for 1.25 mm hexDimensions: length - 28 mmMaterial: Stainless Steel

TMAS-200270Short motor adaptorfor 1.25 mm hex.Dimensions: length - 22 mmMaterial: Stainless Steel

TMAL-200280Long motor adaptor for 1.25 mm hex.Dimensions: length - 30 mmMaterial: Stainless Steel

specialized 1.25mm keys

TRAS-200230Short ratchet key 1.25 mm

TRAL-200240Long ratchet key 1.25 mm


DRM19-300419 | Marking drill | Ø 1.9 mm, 36.5 mm

DRP20-300420 | Pilot drill | Ø 2.0 mm, 36.5 mm

DRT25-300425 | Twist drill | Ø 2.5 mm, 36.5 mm







DRCS-300510 | Countersink for Standard platform | Ø 3.75 / 4.2 mm

DRCW-300520 | Countersink for Wide platform | Ø 5.0 / 6.0 mm

DREX-300500 | Drill Extender | 29 mm

drills• Drills are made of surgical grade

Stainless Steel.• All drills are color coded for diameter.• Drill depth is identified by

corresponding groove as seen below. • An additional 1.0 mm must be added to

the length of the drill to account for the cutting tip.

external irrigation

countersink & extender• Countersink intended use is to remove

cortical bone at ridge to allow pressure-free seating of the implant collar.

• Optional for dense bones type D1, D2.

color code

12907


6 mm8 mm10 mm11.5 mm

13 mm16 mm

6 mm8 mm

10 mm11.5 mm

short standard

DRPS20–400020 | Pilot drill | Ø 2.0 mm, 30.5 mm

DRTS25–400025 | Twist drill | Ø 2.5 mm, 30.5 mm







DRTP-300300 | Tissue punch | Ø3.0 mm




DRTB-303040 | Trephine burr | Outer Ø 4.0 mm, Inner Ø 3.0 mm, L 16 mm



external irrigation - short drills

tissue punch &trephine burrs

color code

• Trephine burrs are used for extracting bone material and implant removal. Laser-marked diameter identification. External irrigation.

• Tissue punch for minimally invasive circular incision in soft tissue. Laser-marked diameter identification. Exter-nal irrigation.


ratchet, depth probe& parallel pins

TPP-200330 Parallel pinØ2.0-Ø3.20 mmLength: 24 mm

TDP-200320Implant site depth probe

TRW-200310Torque ratchet10-45 Ncm

RW-200311Ratchet wrench

SRW-200312Short Ratchet wrench

8 mm

1.9 mm

2.7 mm

10 mm11.5 mm

13 mm16 mm

PACKAGING


Ditron Dental Molecular Precision Implant System™ is packaged in an ISO Class 7 clean room.

This allows the implantologist to transfer the implant freely during the operation without touching the implant.

The implant can be easily removed out of the Titanium sleeve in which it is positioned. The cover screw is secured inside the lid that seals the tube for the user’s convenience. Finally, the implant is mountless inside the sleeve. This mountless design allows the implantologist to remove the implant with any insertion instrument he wishes; hand key, ratchet adaptor or motor.

implant packaging

Implant key and prosthetic key are not part of the package and are sold separately.


The rectangular shaped boxes allow for convenient storage in designated implant drawer.

Quick identification of implant diameter and length. Upper number represents the implant diameter, while the lower represents implant length.

Large typeface, clear data labels

Perforated line for quick opening

Implant type

Catalog number

Ditron Dental products with the CE mark fulfill the requirements of the Medical Device Directive 93/42/EEC

Sterilized using irradiationBatch code

Expire dateManufacture date

Do not use if sterilepackage is compromised

Implant diameter & length

implant packaging& label

The Package contains: Tube, Titanium sleeve, plastic cap, implant and cover screw. Triple label for physician convenience and patient tracking file & instructions for use and leaflet.


implant color coding Ø 3.75

Ø 3.0Ø 3.50

Ø 4.2

Ø 3.3

Ø 5.0

Ø 6.0

Each package is designed with a number of indications that ensure fast and reliable product identification:

• Lid color indication – six colors represent different diameters: yellow, purple, red, blue, green, and white.

• The label on the tube’s lid indicates the implant’s diameter and length.• A product characterization label is positioned outside the implant’s outer tube.


Double label for physician convenience and patient tracking file.

prosthetics packaging & label

653/325

653/325


CE mark. Product conforms with the essential requirements in the European Medical Devices Directive 93/42/EEC.

CE mark including NEMKO (notified body) identification num-ber. Product conforms with the essential requirements in the European Medical Devices Directive 93/42/EEC.

MolecuLock™Molecular Precision Implant System™MPI™Molecular Precision™All trademarks Listed above belong to Ditron Precision Ltd. The other trademarks belong to their owners.

Rx Only Caution: US Federal Law restricts this device to prescription only

Sterilized Using Irradiation

Batch Code

Caution

Expiry Date

Manufacture Date

Manufacturer

0470

REF

REPEC

LOT

STERILE R

Catalog Number

European Representative

Do Not Re-Use

Do not use if package is damaged

Consult Instructions for Use (IFU)

symbolexplanation


INDEX


CAT. NO.

ULT-07375

ULT-07420

ULT-07500

ULT-07600

ULT-08375

ULT-08420

ULT-08500

ULT-08600

ULT-10375

ULT-10420

ULT-10500

ULT-10600

ULT-11375

ULT-11420

ULT-11500

ULT-11600

ULT-13375

ULT-13420

ULT-13500

ULT-13600

ULT-16375

ULT-16420

ULT-16500

ULT-16600

IMPLANTS - PART DESCRIPTION

Ultimate Implant Ø 3.75 mm x length 7 mm












Ultimate Implant Ø 3.75 mm x length 11.5 mm












PAGE

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

16

CAT. NO.

MPI-06420

MPI-06500

MPI-06600

MPI-08330

MPI-08350

MPI-08375

MPI-08420

MPI-08500

MPI-08600

MPI-10330

MPI-10350

MPI-10375

MPI-10420

MPI-10500

MPI-10600

MPI-11330

MPI-11350

MPI-11375

MPI-11420

MPI-11500

MPI-11600

MPI-13330

MPI-13350

MPI-13375

MPI-13420

IMPLANTS - PART DESCRIPTION

MPI Implant Ø 4.20 mm x length 6 mm















MPI Implant Ø 3.30 mm x length 11.5 mm










PAGE

23

23

23

22

20

20

20

20

20

22

20

20

20

20

20

22

20

20

20

20

20

22

20

20

20


CAT. NO.

CAT. NO.

MPI-13500

MPI-13600

MPI-16330

MPI-16350

MPI-16375

MPI-16420

MPI-16500

MPI-16600

20

20

22

20

20

20

20

20

IMPLANTS - PART DESCRIPTION PAGE

PAGE









OPI Implant Ø 3.0 mm x length 10 mm


OPI Implant Ø 3.0 mm x length 11.5 mm

OPI Implant Ø 3.3 mm x length 11.5 mm





OPI-1030

OPI-1033

OPI-1130

OPI-1133

OPI-1330

OPI-1333

OPI-1630

OPI-1633

26

26

26

26

26

26

26

26

AN-2010

ONE-2011

TR-3010

TR-3020

TR-3030

TRS-3040

TRS-3050

Impression Coping - PART DESCRIPTION

Implant Analog Std. Platform

One Piece Analog

Std. Transfer Ø 4.5 x length 12 mm

Short Transfer Ø 4.5 x length 8 mm

Narrow Transfer Ø 3.8 x length 12 mm

Long Screw for Open Tray Transfer

Short Screw for Open Tray Transfer

33

33

33

33

33

33

33

CAT. NO.

ABT-6010

ABT-6020

ABT-6030

ABT-6040

ABT-6050-2

ABT-6050-4

ABT-4015

ABT-4015-1

ABT-4015–1B

ABT-4025

ABT-4025-1

ABT-4025–1B

ABT-5025-1

ABT-5025-3

ABT-5015-1

ABT-5015-3

ABTS-2000

ABTS-2001

BAL-10005

BAL-10020

BAL-10030

BAL-10040

BAL-10050

BAL-10060

PROSTHETICS - PART DESCRIPTION

Straight Abutment length 11.5 mm

Straight Abutment length 8.5 mm

Narrow Abutment length 8.5 mm

Narrow Abutment length 6.0 mm

Straight Anatomic Abutment 2 mm

Straight Anatomic Abutment 4 mm

Angulated Abutment 15° length 8.5 mm


Angulated Abutment 15° length 11.5 mm pos. B



Angulated Abutment 25° length 11.5 mm pos. B

Angulated Anatomic Abutment 25° 1 mm shol.




Abutment Screw Short, length 8.3 mm

Abutment Screw Long, length 9.5 mm

Ball Attachment, length 0.5 mm

Ball Attachment, length 2 mm





PAGE

34

34

34

34

34

34

35

35

35

35

35

35

35

35

35

35

34

34

42

42

42

42

42

42


CAT. NO.

CAC-H10ST

CAC-C10ST

CAT-H10ST

CAT-C10ST

CAS-H10ST

CAS-C10ST

CAP-H10ST

CAP-H20ST

CAP-H30ST

CAP-H1015

CAP-H2015

CAP-H3015

CAP-H1025

CAP-H2025

CAP-H3025

MUA-10ST

MUA-20ST

MUA-30ST

MUA-40ST

MUA-50ST

MUA-0217

MUA-0317

MUA-0330

MUA-0430

MUP-9137


CoCr Base Casting Abutment - Hexagon length 11 mm

CoCr Base Casting Abutment - Cylinder length 11 mm

Titanium Base Casting Abutment - Hexagon length 11 mm

Titanium Base Casting Abutment - Cylinder length 11 mm

Casting Abutment Plastic – Hexagon

Casting Abutment Plastic - Cylinder

Straight Casting Esthetic Abutment – Hexagon with 1 mm Shoulder



Angulated 15° Casting Esthetic Abutment – Hexagon with 1 mm Shoulder






Straight Multi-unit Abutment Height 1.0 mm Shoulder





Angulated Multi-unit Abutment 17° with 2 mm Shoulder




Multi-unit Analog

PAGE

37

37

37

37

37

37

37

37

37

37

37

37

37

37

37

39

39

39

39

39

41

41

41

41

41


CAT. NO.

MUP-9140

MUP-9141

MUP-9160

MUP-9180

MUP-9181

MUS-9150

MUS-9151

MUB-9237

MUS-9170

SRA-8131

HC-1012

HC-1013

HC-1014

HC-1015

HC-1016

HC-1017

HC-1023

HC-1025

HC-1033

HC-1035

LocAbt_h0

LocAbt_h1.0

LocAbt_h2.5

LocAbt_h3.5

LocAbt_h4.5


Close Tray Transfer for Multi-unit

Open Tray Transfer for Multi-unit

Temporary Abutment for Multi-unit

Healing Abutment Cylinder - Multi-unit

Healing Abutment Conical - Multi-unit

Open Tray Screw Long - Multi-unit

Open Tray Screw Short - Multi-unit

Ball Screw for - Multi-unit

Titanium Fixation Screw for Multi-unit

Plastic Cover with Round Conical

Healing Cap, length 2 mm






Healing Cap Wide, length 3 mm

Healing Cap Wide, length 5 mm

Healing Cap Narrow, length 3 mm

Healing Cap Narrow, length 5 mm

Locator Implant Abt. height 0 mm

Locator Implant Abt. height 1.0 mm




PAGE

41

41

41

41

41

41

41

41

41

41

32

32

32

32

32

32

32

32

32

32

43

43

43

43

43


CAT. NO.

LocAbt_h5.5

LocAbt_h6.5

LocPls

LocKey

SRA-8005

SRA-8015

SRA-8025

SRA-8030

SRA-8031

SRA-8032

SRAS-8005-1

SRAS-8015-1

SRAS-8025-1

TAB-7001

TAB-7002

TAB-7003

TAB-7005

TAB-7007

TAB-7008

FSBOX 001

MSBOX002

MMBOX003

DISKIT


Locator Implant Abt. Height 5.5 mm

Locator Implant Abt. Height 6.5 mm

Plastic Kit: Titanium Housing Cap, 3 Plastic Caps and Spacer

Locator Core Tool (Male Removal, Male Seating and Abt. Driver)

Package Contains Straight Abt. with Shoulder 0.5 mm and Screw



Plastic Cover with Hex

Plastic Cover with Round Conical

Plastic Cover Round

Screw for Abutment with Shoulder length 0.5 mm



Temporary Abutment for Bridge with Shoulder length 1 mm





Temporary Abutment Plastic Set (3 units)

SURGICAL KITS - PART DESCRIPTION

Ditron Full Surgical Kit

Mini Surgical Kit

Surgical Tube

Integral Stopper Kit

PAGE

43

43

43

43

38

38

38

38

38

38

38

38

38

36

36

36

36

36

36

PAGE

48

50

52

53

CAT. NO.


CAT. NO.

DRIS-250L13

DRIS-280L13

DRIS-320L13

DRIS-380L13

DRIS-450L13

DRCS-300510

DRCW-300520

DREX-300500

DRM19-300419

DRP20-300420

DRT25-300425

DRT28-300428

DRT32-300432

DRT38-300438

DRT45-300445

DRT50-300450

DRT55-300455

DRPS20-400020

DRTS25-400025

DRTS28-400028

DRTS32-400032

DRTS38-400038

DRTS45-400045

DRTS50-400050

DRTS55-400055

CAT. NO.

DPIS-200L6

DRIS-250L6

DRIS-280L6

DRIS-320L6

DRIS-380L6

DRIS-450L6

DPIS-200L8

DRIS-250L8

DRIS-280L8

DRIS-320L8

DRIS-380L8

DRIS-450L8

DPIS-200L10

DRIS-250L10

DRIS-280L10

DRIS-320L10

DRIS-380L10

DRIS-450L10

DPIS-200L11

DRIS-250L11

DRIS-280L11

DRIS-320L11

DRIS-380L11

DRIS-450L11

DPIS-200L13

SURGICAL TOOLS - PART DESCRIPTION

Drill Integral Stopper Ø 2.5 mm L13.0





Countersink Standard

Countersink Wide

Drill Extender

Marking Drill Ø 1.9 mm

Pilot Drill Ø 2.0 mm

Twist Drill Ø 2.5 mm







Short Pilot Drill Ø 2.0 mm

Short Twist Drill Ø 2.5 mm








Pilot Drill Integral Stopper Ø 2.0 mm L6.0

























PAGE

53

53

53

53

53

56

56

56

56

56

56

56

56

56

56

56

56

57

57

57

57

57

57

57

57

PAGE

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53

53


CAT. NO.

DRTP-300300

DRTP-300400

DRTP-300450

DRTP-300500

DRTB-303040

DRTB-304050

DRTB-305060

RW-200311

TDP-200320

THKL-200300

THKS - 200290

TSQK-200340

THSL-200220

THSS-200210

TMAL-200280

TMAL- 200260

TMAS-200270

TMAS-200250

TPP-200330

TRAL-200240

TRAS-200230

TRW- 200310


Tissue Punch Ø 3.0 mm




Trephine Burr Outer Ø 4.0 mm, Inner Ø 3.0 mm, L16 mm



Ratchet Wrench

Depth Probe

Long Hand and Ratchet Insertion Tool 2.45 mm

Short Hand and Ratchet Insertion Tool

OPI Hand & Ratchet Key

Long Hand Key for 1.25 mm

Short Hand Key for 1.25 mm

Long Motor Adaptor

Long Motor Insertion Tool 2.45 mm

Short Motor Adaptor 1.25 mm

Short Motor Insertion Tool 2.45 mm

Parallel Pin

Long Ratchet Key 1.25 mm

Short Ratchet Key 1.25 mm

Torque Ratchet

PAGE

57

57

57

57

57

57

57

58

58

54

54

27

55

55

55

54

55

54

58

55

55

58


Ditron Precision’s quality system complies with international quality control standards: ISO 1345:2003 – Quality Management System for Medical Devices, ISO 9001:2000 – Quality Management System and CE Directive for Medical Devices 93/42/EEC.All products are 510 (k) cleared by the FDA.

(A division of Ditron Precision Ltd.)2 Haofe St. South Ind. ZoneP.O.B 5010 Ashkelon 7815001. IsraelTel: +972.8.6711884www.ditrondental.come-mail: [email protected]

ver 0

6_03

/201

6

dental implant systems product catalog |...

Documents