PiH Deodorization Fume Collector

Remove harmful gas and odor generatedat laser processing with high efficiency

SERIES

■Specifications

■Feature ■ Internal design

Please direct any questions to:

For Your Safety

“Zeopower”Flashing tube

Fan

Blow tube

Inlet port

Bucket

Filter

Control Panel

Motor

Exhaust vent

Pilot valve

Diaphragm valve

Bucket-lifter

Activated charcoal unit

Filter aid

Activated charcoal Unit Molded cartridge filter

Mechanism for pre-coated “zeopower”

(㎥/mim) 0 10 13 0 20 26Airflow

0 353 459 0 706 918Static Pressure（kPa） 2.74 1.07 0.49 2.84 1.18 0.49

0 10 15 0 20 300 353 530 0 706 1060

Static Pressure (kPa） 2.74 2.55 1.13 2.84 1.86 1.13

QuantityArea (㎡/sf)MaterialDust off

WithActiveCharcoal

WithoutActiveCharcoal

4 8

1.44m/min , 4.72 ft/min70±2 or less

Filter

Pulse Jet (Fixed Interval)Polyester Spanbond

13/459 26/918

Power supplyMotor Output (kW) 1.5 3.7

3-phase 50 or 60Hz separate use

Capacity (㎥/mim)/(cf/min)

Compressed Air Consumption (L/min)Pulse Jet Type:

Filtration Air Velocity （Max.）Noise (dB[Ａ])

300

9 / 96.8 18 / 193.7

CompressedFlushing 150

20 40

6.0kg / 13.2 lbs 12.0kg / 26.4 lbs

1100×772×2198

36kg （Activated Charcoal） 72kg （Activated Charcoal）SF20H (Equivalency) After Filter

25 25×2

Filter Aids (Zeopower)

Power Cord (m)/(ft)

650×722×2043W×D×H

4 core cord, no plug 　3 / 15φ125mm / φ5" φ200mm / φ7.87"

25.6×25.6×80.3 43.3×27.6×86.4

350 / 770

Model PiH-30 PiH-60

Weight (kg)/(lbs)

Deodorant （12kg/unit）Activated Charcoal Shatterploof Bucket Size (L)

190 / 418

Inlet Size (mm)/(in)

●Be sure to read the instruction manual thoroughly before getting started, and use the machine correctly.●This machine collects fumes and deodorizes their odors. ●Do not suction the following materials: • Explosive materials... aluminum, magnesium, titanium, zinc, epoxies, etc. • Flammable materials... gasoline, thinner, benzene, kerosene, paint, etc. • Corrosive substances・・・hydrochloric acid gas, chlorine, sulfuric acid gas, hydrogen fluoride etc. • Sparks... sparks, or dust that contains sparks • Fire remains... cigarette stubs, ashes, etc. • Other... water, oil, liquid chemicals, etc.●If there is a danger of suctioning sparks when collecting flammable dust from polishing work and so forth, consult with your branch or sales office to select the appropriate model.●This product is not an explosion-proof type. Do not install the machine at hazardous areas specified by laws.●Do not operate the machine in areas exposed to mist, fumes or gases that are inflammable,explosive or corrosive.●Please comply with regulations stipulated by laws and/or ordinances that are applicable to product installation.

●The ambient temperature range is from 0℃ to 40℃.●Be sure to ground the machine to protect against electric shock.●Be sure to use pipes with the appropriate diameter and make them as short as possible according to dust collection conditions so that dust will not accumulate in them.●Please perform daily and periodical maintenance work in accordance with instructions described in the operation manual. Please comply with regulations stipulated by laws and/or ordinances that are applicable to product maintenance.

(cf/min)

Airflow (㎥/mim)(cf/min)

(in)(mm)

Air Consumption (L/min)