design and development of fire resistant steels · fire resistant versus “normal” steel •...
TRANSCRIPT
![Page 1: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/1.jpg)
Design and Development of Fire Resistant Steels
Cameron Gross, Dieter Isheim, Semyon Vaynman, Morris E. Fine, Yip-Wah Chung
!SRG 2014
Northwestern University March 25, 2014
![Page 2: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/2.jpg)
Enhanced structural steels
• Steels need to maintain strength in building fires.!
• Delay building collapse.!
• Extend time of structural safety to allow for evacuation.
2Photo Credit: Eric Hensley, Wikimedia Commons
![Page 3: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/3.jpg)
Construction standards• Current building codes: 50%
of room temperature yield strength at 550°C.!
• Over the past 10 years, ASTM and NIST are discussing standards requiring 66% of yield strength maintained after 20 minutes at 600°C.
3Photo credit: Purdue Engineers Test Effects of Fire on Steel Structures. Homel. Secur. News Wire (2010). at <http://www.homelandsecuritynewswire.com/purdue-engineers-test-effects-fire-steel-structures>
![Page 4: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/4.jpg)
Fire resistant versus “normal” steel
• Delay onset of thermally activated failure processes.!
• Enhanced safety for building occupants.!
• Reduces need for volatile and labor intensive insulation.
4
!
Temperature!
Fire,resistant!steel!
Normal!structural!steel!
Fig. 5. Temperature dependence of yield strength of normal structural and fire-resistant steels
Normal steel
Fire resistant steel
Courtesy of Prof. Yip-Wah Chung
![Page 5: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/5.jpg)
Incoherent versus coherent precipitates
5
• (Nb,V) carbonitrides form with a Baker-Nutting relationship. • Pure NbC carbides have less than a 10% mismatch between
lattice planes. • (Nb,V) carbonitrides have less than a 6% mismatch. • Misfit dislocations arise in semicoherent interfaces.
Image credit: Grote, K-H and Erik Antonsson. Springer Handbook of Mechanical Engineering. Springer-Verlag 2009.
![Page 6: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/6.jpg)
Design objectives• Primary:
• Meet or exceed proposed standards by designing a steel that maintains over 66% of the room temperature yield strength after 20 minutes of exposure at 600°C.!!
• Room temperature yield strength of at least 350 MPa.!
• Secondary:
• Alloy content of V + Nb + Mo < 0.55 wt. %.!• Carbon content < 0.1 wt. %.!• No water or oil quench or thermo-mechanical processing.
6
![Page 7: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/7.jpg)
Design strategies
• Form small, Nb and V based monocarbide (MC) precipitates.!
• Reduce or eliminate higher order carbides and cementite to allow maximum MC formation.!
• Use thermodynamic modeling to guide design process.
7
![Page 8: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/8.jpg)
Systems design chart
8
![Page 9: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/9.jpg)
Thermodynamic modeling
9
All compositions in wt. %
Increased Cr Increased C
Base Alloy: 0.05-C 0.25-Cr 0.15-Mo 0.07-Nb
Base Alloy
![Page 10: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/10.jpg)
• Two commercial alloys, FR-5 and FR-6, supplied by Nucor.!
• FR-7 created by arc melting FR-5 with C and V additions. Supplied by Sophisticated Alloys.
Experimental alloys
10100 µm
FR-7
![Page 11: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/11.jpg)
Experimental alloy compositions
11
FR-6
![Page 12: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/12.jpg)
Local electron atom probe (LEAP) experiments
• LEAP was used to investigate the presence of carbide precipitates.!
• Size, distribution, and composition can be determined from the LEAP reconstruction.
12Photo Credit: NUCAPT
![Page 13: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/13.jpg)
Only Nb & C atoms are shown
FR-5: Atom probe result from air-cooled sample
13
![Page 14: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/14.jpg)
Only Nb & C atoms are shown
Evidence of clusters 1 nm in radius or less!(about 100 atoms)
14
FR-5: Atom probe result from aging for 2 hours at 600°C
![Page 15: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/15.jpg)
Air cooled After 2 hrs at 600°C
negligible clustering
observable clustering
C C
15
FR-5: Carbon clustering between 0 and 2 hours
![Page 16: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/16.jpg)
Only 50% of Nb & C atoms are shown!!
1% Nb isosurfacing and 1% C isosurfacing shown to emphasize precipitates
Nb, C precipitates
16
FR-5: Atom probe result from aging for 6 hours at 600°C
![Page 17: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/17.jpg)
MC
M2C
MCM2C
17
Existence of two types of precipitates based on (C+N)/M ratio
M = Cr + Mo + V + Nb
![Page 18: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/18.jpg)
0 1 2 3 4 5 60
20
40
0
20
40
0
20
40
0
20
40
0
20
40
Distance (nm)
NCon
cent
ratio
n of
N, C
, V, C
r, an
d N
b in
at.
%
C
V
Cr
Nb
0 1 2 3 4 5 60
20
40
0
20
40
0
20
40
0
20
40
0
20
40
Distance (nm)
NCon
cent
ratio
n of
N, C
, V, C
r, an
d N
b in
at.
%
C
V
Cr
Nb
MC M2C
18
Composition profiles of typical precipitates
![Page 19: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/19.jpg)
MC precipitate composition
19
Composition comparison with Thermo-Calc
![Page 20: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/20.jpg)
Mechanical Testing Parameters
20
• Conducted in accordance with ASTM standards.!
• Strain rate 0.005 ± 0.002 1/min.!
• High temperature tensile tests conducted in atmosphere.!
• High temperature compression tests conducted under controlled environment.
![Page 21: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/21.jpg)
Experimental alloy compositions
21
FR-6
![Page 22: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/22.jpg)
FR-5 FR-5
Tension Compression
22
FR-5: Stress-strain curves at 20°C and 600°C (held for 20 min)
Yield strength (YS) ratio 0.67 ± 0.06
YS ratio 0.64 ± 0.03
![Page 23: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/23.jpg)
YS ratio 0.50 ± 0.02
23
FR-6: Tensile curves at 20°C and 600°C (held for 20 min)
![Page 24: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/24.jpg)
YS ratio 0.72 ± 0.03
FR-7
24
FR-7: Compression curves at 20°C and 600°C (held for 20 min)
![Page 25: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/25.jpg)
25
Alloy Compositions
FR-7
FR-8 supplied by Sophisticated Alloys
![Page 26: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/26.jpg)
26
FR-8 Isopleth
FR-8
![Page 27: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/27.jpg)
Calculated equilibrium carbide phase fraction
27
MC phase fraction contributes to high temperature strength
![Page 28: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/28.jpg)
YS ratio 0.71 ± 0.04
28
FR-8: Compression curves at 20°C and 600°C
YS ratio 0.81 ± 0.06
![Page 29: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/29.jpg)
• Design process resulted in a steel that exceeded the goal: reaching over 70% YS retention after 20 minutes, and over 80% YS retention after 2 hours of exposure to 600°C.!
• Thermo-Calc accurately predicted the composition of small carbonitride precipitates.!
• Future work: predict interfacial energy and coherency to optimize precipitate composition.
29
Initial conclusions and future work
![Page 30: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/30.jpg)
Creep resistant steels for steam turbines
• Current Ni based superalloys are expensive.!
• Steels currently creep too rapidly to be used for ultra supercritical (USC) steam generators.!
• Increasing the operating temperature in USC steam generators will reduce greenhouse gas emissions worldwide.
30Photo credit: NRC
![Page 31: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/31.jpg)
Creep resistant steel alloys for steam turbine applications
• Requires at least 9 wt. % Cr for corrosion resistance.!
• Creep resistance at 35 MPa at temperatures over 620°C.!
• Minimize alloy content to remain cost competitive with current options.
31Photo credit: General Electric Company. http://www.ge-energy.com/products_and_services/services/steam_turbines_power_generation_services/
![Page 32: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/32.jpg)
• We have built a foundation of theoretical models that predict experimental observations.!
• I have confidence that we will be able to use this design process to achieve the proposed goals.!
• The development of an effective steel for steam turbine use has the potential to change the world.
32
Concluding remarks
![Page 33: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/33.jpg)
33
Acknowledgments• Professors Morris E. Fine, Yip-Wah Chung,
Semyon Vaynman, and Dieter Isheim.!• Dr. Shrikant Bhat for his help and insight!• Nucor and Sophisticated Alloys for providing the
alloys.!• The NSF CMMI for supporting the research.!• The OMM, CLAMMP, and NUCAPT facilities at
Northwestern University.
![Page 34: Design and Development of Fire Resistant Steels · Fire resistant versus “normal” steel • Delay onset of thermally activated failure processes.! • Enhanced safety for building](https://reader034.vdocuments.net/reader034/viewer/2022042804/5f587e5843e1d5417261dafc/html5/thumbnails/34.jpg)
Thank you! Questions?