design component
DESCRIPTION
Design ComponentTRANSCRIPT
Ceiling
Ceiling
Suspended metal lath and gypsum plaster(0.48)
Coverings, Roof & Wall
Wall Covering
Slate, 6mm(0.48)
Waterproofing Membranes for Floors & Walls
Liquid, applied(0.05)
Bituminous Oil Primer
Premium standard bituminous oil primer, which find usage on surfaces for the purpose of waterproofing. These bituminous primers are in tune with international quality standards and can be used in cold condition.
Features:Highly penetrative Excellent adhesion to most surfaces Inflammable Viscosity : 4 sec. to 25 sec
Floor & Floor Finishes
Ceramic or quarry tile (20mm) on 25 mm mortar bed(1.10)
Concrete fill finish (13mm) on 2F & 3F area 3
Master Bedroom
Bedroom 1
Bedroom 2
Bedroom 3
Kitchen
Dining Room
Living Room
Exterior Balcony @ Master Bedroom
Bathroom 2 @ 3F
Bathroom 1 @ Master Bedroom
Bathroom 3 @ 2F
Concrete Masonry Units (19.6 kN/m^3)Add (0.24) for each face plasteredAdd (0.05) applied liquid water proofing for walls that may exposed to waterAdd (0.48) for walls covered with 6mm slate
Frame & Partition Walls
Full grout spacing with 150 mm wythe thickness (2.82)