DEUTZ Corporation provides comprehensive technical training on all current engine and system related technologies. All courses are conducted according to a predetermined curriculum and schedule. Textbooks and manuals are provided to supplement lectures which are conducted by job experienced instructors. DEUTZ authorized service training courses use PowerPoint presentations, cutaway parts, exploded drawings and films to explain clearly the theory of operation and to provide every technician a firm working knowledge of DEUTZ engine working principles. Hands-on work experience is incorporated into all courses in order to provide the technician with maximum in depth training. This includes relevant service procedures using the appropriate service tools and technologies. The DEUTZ Corporation training facility is located at the following address:

The nearest major airport is Hartsfield-Jackson (ATL). Flights should arrive the day prior to class and departure should be no earlier than 7PM on the last day of class due to possible traffic and security delays.

DEUTZ Corporation Technical Training

Introduction

Location

Travel

Hotel accommodations are offered by the following:

A discounted rate can be obtained by using our corporate/promotional code which is "DTZ". Transportation to and from the training facility will be provided by the hotel. Please advise during check-in that hotel transportation is required. The group will meet in the hotel lobby at 8:00 am.

Shuttle service to and from the airport is offered by:

The Residence Inn Gwinnett provides their customers with daily shuttles between the hotel and our facility. Courses at our Norcross training facility are conducted from 0830 to 1600 hours. Attendees should arrive a half hour early wearing appropriate work clothes and shoes. A laptop PC with DECOM diagnostic interface and relevant software are recommended. DEUTZ Corporation reserves the right to cancel courses if the minimum number of registrations is not met. In such cases we will notify registrants at least 1 week in advance. Registration fees will not be refunded if notice of cancellation is not received from registrants at least 1 week before the course begins.

Requirements

Hotel

Transportation

Course name Sub 4 Liter

Engine models B/F1011, B/F1011F, B/F2011, T/C/D2011 Description This course provides in depth coverage of series design

features, maintenance, overhaul, cooling system, lubrication system, and fuel system.

Duration 4 days Certification Yes Cost $640.00 US Available dates January 5-8, July 5-8

Course name 4 – 8 Liter

Engine models B/F1012, B/F1013, TCD2012, TCD2013, TCD4.1, TCD6.1, TCD7.8

Description This course provides in depth coverage of series design features, maintenance, overhaul, cooling system, lubrication system, and fuel system.

Duration 4 days Certification Yes Cost $640.00 US Available dates February 2-5

Course name Above 8 Liter

Engine models BF1015, TCD2015, TCD12.0, TCD16.0 Description This course provides in depth coverage of series design

features, maintenance, overhaul, cooling system, lubrication system, fuel system, and emissions systems.

Duration 4 days Certification Yes Cost $640.00 US Available dates February 16-19, June 21-24, August 16-19

Course name Electronic governing

Engine models B/F914, B/F1012, B/F1013, B/F2011, T/C/D2011, TCD2012, TCD2013, BF1015, TCD2015

Description This course provides in depth coverage of the EMR, EMR2, and EMR3 electronic governing systems. This includes diagnoses, circuit testing, and use of the DEUTZ Serdia diagnostic software.

Duration 4 days Certification Yes Cost $640.00 US Available dates May 24-27, September 13-16

2016 Course Catalog

Course name Tier 4 Sub 4 Liter

Engine models T/C/D2.2, T/C/D2.9, T/C/D3.6 Description This course provides in depth coverage of the series design

features, maintenance, fuel system, and emissions systems. Duration 4 days Certification Yes Cost $640.00 US Available dates January 19-22, March 1-4, April 26-29, May 10-13, July 19-22,

August 30-2, October 25-28

Course name Tier 4 4 – 8 Liter

Engine models TCD4.1, TCD6.1, TCD7.8 Description This course provides in depth coverage of the series design

features, maintenance, fuel system, and emissions systems. Duration 4 days Certification Yes Cost $640.00 US Available dates March 15-18, April 12-15, June 7-10, September 27-30,

October 11-14, December 13-16

Course name Sub 4 Liter

Engine models B/F1011, B/F1011F, B/F2011, T/C/D2011 Description This course provides in depth coverage of series design

features, maintenance, overhaul, cooling system, lubrication system, and fuel system.

Duration 4 days Certification Yes Cost $640.00 US Available dates January 3-6

Course name 4 – 8 Liter

Engine models B/F1012, B/F1013, TCD2012, TCD2013, TCD4.1, TCD6.1, TCD7.8

Description This course provides in depth coverage of series design features, maintenance, overhaul, cooling system, lubrication system, and fuel system.

Duration 4 days Certification Yes Cost $640.00 US Available dates January 31-3

Course name Above 8 Liter

Engine models BF1015, TCD2015, TCD12.0, TCD16.0 Description This course provides in depth coverage of series design

features, maintenance, overhaul, cooling system, lubrication system, fuel system, and emissions systems.

Duration 4 days Certification Yes Cost $640.00 US Available dates February 28-3, June 20-23

Course name Electronic governing

Engine models B/F914, B/F1012, B/F1013, B/F2011, T/C/D2011, TCD2012, TCD2013, BF1015, TCD2015

Description This course provides in depth coverage of the EMR, EMR2, and EMR3 electronic governing systems. This includes diagnoses, circuit testing, and use of the DEUTZ Serdia diagnostic software.

Duration 4 days Certification Yes Cost $640.00 US Available dates April 18-21

2017 Course Catalog

Course name Tier 4 Sub 4 Liter

Engine models T/C/D2.2, T/C/D2.9, T/C/D3.6 Description This course provides in depth coverage of the series design

features, maintenance, fuel system, and emissions systems. Duration 4 days Certification Yes Cost $640.00 US Available dates March 14-17, April 4-7

Course name Tier 4 4 – 8 Liter

Engine models TCD4.1, TCD6.1, TCD7.8 Description This course provides in depth coverage of the series design

features, maintenance, fuel system, and emissions systems. Duration 4 days Certification Yes Cost $640.00 US Available dates January 17-20, May 16-19, June 6-9

Course name Failure analysis

Engine models All Description This course provides in depth coverage of failure analysis

relating to diesel engines and their associated components. Duration 4 days Certification No Cost $640.00 US Available dates May 2-5

Course name Sales Product Training

Engine models All Tier 4 Description This course provides a high level overview of all DEUTZ Tier 4

products including design features, ratings, maintenance, fuel system, emissions systems.

Duration 2 days Certification No Cost No charge Available dates February 16-17

DEUTZ Corporation Training Registration E-mail to: training.s@deutzusa.com | Fax to: 770-564-7116

DEUTZ Corporation 3883 Steve Reynolds Blvd Norcross, GA 30093 Phone (770) 564-7100 E-mail: training.s@deutzusa.com www.deutzamericas.com

Training Registration

A copy of the emailed or faxed registration form must be mailed by postal service to the address below. Confirmation with information about hotel, transportation, etc. will be sent to the attendee’s attention upon receipt of registration. Please Print Attendee’s Name ___________________________________________________________________________ Certification # (if available) ___________________________________________________________________________ Employer ___________________________________________________________________________ Employer Address ___________________________________________________________________________ ___________________________________________________________________________ Service Manager _____________________________________ Phone: ______________________________ Date of School _____________________________________ Fax: ________________________________ DEUTZ Distributor Name _____________________________________ Email: _______________________________ DEUTZ Distributor Location ___________________________________________________________________________ School Location ___________________________________________________________________________

School Dates Dates must coincide with school schedule. Prices are subject to change without notice.

Dates Type of Training (Per Schedule) Cost

$640.00

Method of Payment: DEUTZ Corporation can only accept Purchase Orders from customers i.e. Distributors, OEMs that have an Account with DEUTZ Corporation. All OTHERS registering must Mail the registration form and enclose a check payable to: DEUTZ CORPORATION, Attn: Service Training, 3883 Steve Reynolds Blvd, Norcross, GA 30093

Distributor/OEM P.O. #: _________________________________________ All OTHERS’ Check #: ________________________ Distributor Comments: _________________________________________________________________________________________ Authorized Signature: _______________________________________________________ Date: ___________________________