dfgdfgdfgvfd
TRANSCRIPT
-
7/28/2019 dfgdfgdfgvfd
1/2
Course objective
With this Hands-On Training customers
personnel will be trained to understand
the technology of industrial steam turbine
generators and drives and will learn how
to disassemble/assemble the main com-
ponents of industrial steam turbines.
Course structure
This practical training is designed to instruct
customers personnel in subjects, such as
basic design of the equipment, principles
of steam turbine operation. In addition, all
handling procedures are trained for periph-
eral components, like bearings, clearances,sensors, etc. Trainees can exercise on
their own at our training modules which
represent the original design of industrial
steam turbines.
Course duration and location
The standard duration of this course is
5 days. Depending on customers specic
requirements, the duration of the training
program can be adjusted to less or more
than 5 days. This Hands-On Training takes
place at our purpose built training centerin Duisburg, Germany.
Who should attend:
Experienced operational and mainte-
nance personnel
Siemens Industrial Steam TurbinesHands-On Training
Answers for energy.
-
7/28/2019 dfgdfgdfgvfd
2/2
Course topics
Health, safety, environment
Basic steam turbine design: casing,
bearings
Disassembly and assembly: check of
bearings, bump check
Disassembly and assembly of turbinecasing: steam chamber, casing
Check of clearances: rotor, seals,
bearing
Disassembly and assembly of blade
carrier
Controlling of valves: spindle, cone,
bushing
Disassembly and assembly of bearings:
radial bearing, thrust bearing, tools,
adjustments, control measurements,
reassembly of bearing, alignment
Maintenance basic aspects: operatingdata sheets, inspections, cleaning and
preservation, maintenance procedures
Troubleshooting: cause & effects,
rectication
Disassembly and assembly of shaft
monitoring devices: sensors, control
measurements, assembly procedures
Contact Training department:
E-mail: [email protected]
Phone: +49 (0) 203 605 4106Fax: +49 (0) 203 605 4411
shed by and copyright 2008:ens AGgy Sectoreslebenstrasse 158 Erlangen, Germany
ens Power Generation, Inc.0 Alafaya Trailndo, FL 32826-2399, USA
more information, contact our
omer Support Center.+49 180/ 524 70 00+49 180/ 524 24 71ject to charges, e.g.: 0,12 /min.)il: [email protected]
w.siemens.com/energy-support
er No. A96001-S90-A303-V1-4A00ed in Germany6 J DA 0208 1.
ghts reserved.ect to change without prior notice.ed on paper treated with chlorine-bleach.
emarks mentioned in this docu-t are the property of Siemens AG,liates, or their respective owners.
nformation in this documentains general descriptions of thenical options available, which may
pply in all cases. The requirednical options should therefore beed in the contract.