dht v4 full catalog

www.calditchwitch.comVOLUME 4

Down Hole Tool Parts CatalogDown Hole Tool Parts Catalog

*Prices sSubject ToChange Without Notice

www.calditchwitch.com 866-382-3686

DITCH WITCH The Parts You Need-When You Need ThemWe can guarantee the superior quality and performane of our parts because we design, test and manufacture each part toprovide optimal performance with its compatible equipment. We are the ONLY underground equipment manufacture that does this. Why? Because we believe there is no such thing as an unimportant part. And you can find a large inventory ofgenuine Ditch Witch parts, for equipment new and old, at any of our four dealerships. If we don’t have the part you need, we can get it fast - usually within 24 hours.

866-382-3686 www.calditchwitch.com

DITCH WITCH Expert ServiceOur professional service technicians are factory-trained to know everything there is to know about Ditch Witch equipmentmaintenance and repair. When you trust your equipment with us, you can be certain it is in good hands.

01 www.calditchwitch.com 866-382-3686

DITCH WITCH

DESIGNED, MANUFACTURED AND TESTED BY DITCH WITCH

“You break it, we buy it.” For one year. No other drill pipe manufacture has this much confidence in the quality and strength of their rod.

You will recieve a 5% discount off list price of 15 sticks or more of lined drill rod. We also offer special financing terms when using your Ditch Witch Platinum Card +. Ask for details.

Buy the best for less and use less water, less mess, and less vacuum trips tothe dump! Plus only our pipe matches your O.E.M. thread pattern.We will match any competitive price on Un-Lined drill rod. Bring us yourquote, we will match it with our 100% Genuine Ditch Witch Drill Rod!

JT920/921 355-1052 $204.48 JT920/921 355-1052 $204.48 JT922 400-1118 $204.48 JT922 400-1118 $204.48 JT1220 355-1005 $255.86 JT1220 355-1005 $255.86 JT1720 400-843 $253.80 JT1720 400-843 $253.80 JT2020 401-339 $286.68 JT2020 401-339 $286.68 JT2720 400-844 $323.68 JT2720 400-844 $323.68 JT27M1 400-1031 $323.68 JT30M1 400-1031 $323.68 JT30M1 400-1031 $323.68 JT4020 400-846 $492.20 JT4020 400-846 $492.20 JT40M1 400-847 $512.74 JT40M1 400-847 $512.74

JT5 355-1052 $204.48 JT5 355-1052 $204.48 JT920/921 355-1052 $204.48 JT920/921 355-1052 $204.48 JT922 400-1118 $204.48 JT922 400-1118 $204.48 JT1220 355-1005 $255.86 JT1220 355-1005 $255.86 JT1720 400-843 $253.80 JT1720 400-843 $253.80 JT2020 401-339 $286.68 JT2020 401-339 $286.68 JT2720 400-844 $323.68 JT2720 400-844 $323.68 JT27M1 400-1031 $323.68 JT30M1 400-1031 $323.68 JT30M1 400-1031 $323.68 JT4020 400-846 $492.20 JT4020 400-846 $492.20 JT40M1 400-847 $512.74 JT40M1 400-847 $512.74

JT5 355-1052 $204.48 JT5 355-1052 $204.48

$614.47$598.45$374.03$374.03$379.37$358.02$358.02$315.22$251.14$251.14$251.14

$614.47$598.45$374.03$374.03$379.37$358.02$358.02$315.22$251.14$251.14$251.14

2


DITCH WITCH EZ CONNECT EZ Connect transition subs are designed to absorb stress that would otherwise be transmitted directly to the drill pipe, beaconhousings, and backreamers. Manufactured with high-strength, low-alloy steel, our T-subs are heat treated and precision-gun-drilled to produce maximum durability. EZ Connects are a time and energy saving innovation developed by Ditch Witch to helpyou easily and quickly remove the drill head or backramer without the need for heavy tools. Simply remove one small bolt, slidecollar, and unscrew the drill head or backreammer by hand.

866-382-3686 www.calditchwitch.com 04

DITCH WITCH Hawkeye /SplinelockThe Hawkeye™ HDD tooling connection features a breakthrough quick-threading tapered thread profile that compensates for wear, and has superior load-bearing and tensile load-carrying capabilities. Its unique design allows for easier flat alignment and lubrication. With a fast make-up and virtual elimination of cross-threading, Hawkeye is the new tooling connection leader. SPLINELOCK™ connectors are a fast and innovative way to change out HDD tooling. The high-torque square drive spline locks the housing or reamer to the transition sub securely without bolts, and the bit is automatically aligned to clock position.


DITCH WITCH Beacon HousingsDitch Witch Proline Series housings represent the top of the line Universal, Dirt, and HD Drill Housings in the world. Our patent-pending designed door slot technology has never had a failure in millions of hours of drilling time. The side-load housing allowsthe least amount of bent torque at the door in steering than any other housing. This housing a shorter to allow quicker steering.With the availability of the wide selection of Ditch Witch bits, this housing is a tough and versatile tool in your HDD Tool Box.


DITCH WITCH TRIHAWK HD HOUSINGSThe Ditch Witch Trihawk is an exceptionally versatile, durable and productive housing for directional drilling. Available in foursizes, the Trihawk HD housing is capatible with most Ditch Witch drills. With it’s ultra heavy-duty and innovative and high-flow design, Trihawk has the power and volume necessary to also run mud motors and air hammers. And, as drilling conditionschange, you can change tooling with maximum speed and security thanks to the housing’s square drive spline, one of TrihawkHD housing’s many patented features. Our boltless pinned-lid system provides outstanding protection for and easy removal ofyour valuable electronics. One year warranty and factory-rebuild programs demonstrate our unparralleled product support. your valuable electronics. One year warranty and factory-rebuild programs demonstrate our unparralleled product support.

TRIHAWK HD SERIES


DITCH WITCH TRIHAWK HD HOUSINGS Ditch Witch Trihawk is an exceptionally versatile, durable and productive housing for directional drilling. Available with five inter-changable bits, this Heavy-Duty system is your all in one setup for all formations. With it’s innovative high-flow design, Trihawkhas the power and volume you necessary to also run mud motors and air hammers. And, as drilling conditions change, you canchange the tooling with maximum speed and security thanks to the housing’s square drive spline, one of Trihawk HD housing’smany patented features. Patented boltless pinned-lid system provides outstanding protection for and easy removal of yourvaluable electronic’s. One year warranty and factory-rebuild programs demonstrate Ditch Witch’s unparalleled product support.valuable electronic’s. One year warranty and factory-rebuild programs demonstrate Ditch Witch’s unparalleled product support.


DITCH WITCH BITS JET TRACDitch witch bits are optimized not only for the soils they work in but also for the drills that drive them. So, you know that when you’re drilling with any Ditch Witch dril and bit, you’re getting the level of performance that only comes from components trulymade for each other. Ditch Witch bits are tested in real work conditions and engineered to outperform and especially outlast any competitor’s bit. And they’re made with the optimal amount and placement of carbide to maximize performance and value.


DITCH WITCH BITS JET TRAC / ALL-TERRAIN


DITCH WITCH PULLING ACCESSORIES


REAMERSSIZE PART# PRICE

JT520

2” SHAFT

JT920JT921JT922JT1220JT1720JT2020JT2720JT2720

6” ....................... 369-201 ............... $ 997.548” ....................... 368-419 ............. $1,103.1010” ..................... 368-424 ............. $1,211.8312” ..................... 368-621 ............. $1,272.00

7/8” NOZZLE

7/8” NOZZLE3.5” SHAFT

NOZZLES7/16” .................................. 159-292 .................... $13.427/8” .................................... 159-404 .................... $19.34

QUICK WRENCH SET ........ 368-761 .................. $589.00

2.75” SHAFT

8” ..................... 400-323 ........... $1,212.8810” ................... 400-324 ........... $1,318.4412” ................... 400-325 ........... $1,381.7814” ................... 400-326 ........... $1,656.2416” ................... 400-327 ........... $1,867.3618” ................... 400-328 ........... $2,089.03

14” ..................... 368-427 ............. $1,538.0118” ..................... 368-430 ............. $1,972.92

JT27M1JT30M1JT4020JT40M1

4.5” .................... 369-198 ................ $ 758.98

14” ..................... 368-548 ............. $ 1,297.33

6” ....................... 368-536 ................ $ 864.548” ....................... 368-539 ................ $ 980.6510” ..................... 368-542 ............. $ 1,081.9912” ..................... 368-545 ............. $ 1,191.77

BEAVERTAIL7/16” NOZZLES

REAMERSCOMPACT FLUTED

7/16” NOZZLE

CAST FLUTED

KODIAK

3.5” SHAFT

SIZE PART# PRICEJT520 4.5” .................... 357-696 ............. $1,097.82


4.5” .................... 401-355 ............. $1,081.99

10.5 “ ................. 368-946 ............. $2,207.46

8.5” .................... 368-944 ............. $1,488.40

6.5” .................... 368-942 ............. $1,191.77



10” ..................... 400-330 ............. $1,868.41

12” ..................... 400-331 ............. $2,169.26

QUICK WRENCH SET ........ 368-761 .............. $ 589.00

14” ..................... 400-332 ............. $2,606.28

18” ..................... 400-334 ............. $3,140.41

8” ....................... 400-269 ............. $1,468.34

10” ..................... 400-270 ............. $2,391.99

12” ..................... 400-271 ............. $3,344.14



10” ..................... 369-661 ............. $1,873.69

20” ..................... 369-664 ............. $3,370.53

12” ..................... 369-662 ............. $2,216.76

3” SHAFT

3.5” SHAFTNOZZLES

7/8” ................................. 159-404 ........... $ 19.34

7/16” ............................... 159-292 ........... $ 13.42

16” ..................... 369-663 ............. $3,008.46

SMALLER AND LARGER SIZE SHACKLES ARE AVAILABLE. AS WELL AS PULLING SLINGS

WITH MORE OR LESS LEGS. ALL VIA SPECIAL ORDER. JUST GIVE US A CALL FOR PRICING

AND AVAILABILITY.


PULLING ACCESSORIESSLINGS

SHACKLES

SIZE PART# PRICEJT520 SPECIAL ............ 369-709 .................... $51.281/2” ............................... 110-509 .................... $14.005/8” ............................... 110-969 .................... $21.223/4” ............................... 110-040 .................... $26.627/8” ............................... 110-987 .................... $32.78

# OF LEGS PART# PRICE3-WAY ......................... 08549333 ............. $200.314-WAY ......................... 08549329 ............. $200.31

2 GALLON BUCKET ... PART# 259-858 ............. $77.78

ROD WIPERMODEL PART# PRICEJT520, JT920 & .. 116-515 .................. $ 24.76JT921

JT1220 ................ 149-974 .................. $173.49JT1720 ................ 116-485 .................. $ 24.76

JT2720 ................ 116-485 .................. $ 24.76

JT4020 ................ 116-485 .................. $ 24.76JT40M1 ............... 157-196 .................. $265.20

JT2020 ................ 149-973 .................. $177.91

JT30M1 ............... 149-973 .................. $177.91

JT922 .................. 149-578 .................. $186.93

GREASE TUBE ........... PART# 256-663 ............. $ 6.73

LARGE KIT .. PART# 190-052 .... $167.34

SMALL KIT .. PART# 190-051 .... $ 32.17

O-RING KITS


THREAD GREASE

*Prices plus tax. Pricing shown is for standard replacable head units.


Northern California Central California Southern California 800-510-6262 800-350-2595 800-491-9004

www.calditchwitch.com

www.calditchwitch.com

SAVER SUBSMODEL PART # PRICEJT520 ............................. 400-828 .......................... $ 254.10

107-322 bolts ................. $ .57155-792 oring ................. $ .19

JT920 & JT921 .............. 301-891 .......................... $ 242.55106-081 bolts ................. $ 1.23

106-081 bolts ................. $ 1.25

106-081 bolts ................. $ 1.23

157-019 oring ................. $ .52

157-019 oring ................. $ .52

157-019 oring ................. $ .52

157-019 oring ................. $ .52

157-019 oring ................. $ .52

157-019 oring ................. $ .52JT4020 ........................... 307-538 .......................... $ 738.32

107-354 bolts ................. $ 2.10

107-354 bolts ................. $ 2.10


157-151 oring ................. $ .70

157-151 oring ................. $ .70

JT40M1 .......................... 400-1136 ...................... $1,299.48

JT2720 ........................... 343-275 .......................... $ 414.75106-797 bolts ................. $ 1.09

106-797 bolts ................. $ 1.09

106-797 bolts ................. $ 1.09

153-560 oring ................. $ 1.90

153-560 oring ................. $ 1.90JT30M1 .......................... 400-1223 ........................ $ 941.00

106-478 bolts ................. $ .99

155-708 oring ................. $ .39JT27M1 Tier 1 ............... 400-1224 ....................... $1,039.00

JT27M1 Tier 2 ............... 400-1229 ......................... $ 825.00

JT2020 ........................... 400-905 .......................... $ 519.75

JT1720 ........................... 301-892 .......................... $ 282.45

JT1220 ........................... 400-604 .......................... $ 420.73106-642 bolts ................. $ 1.33

106-642 bolts ................. $ 1.33

JT922 ............................. 300-2340 ........................ $ 242.55

Radius Tooling now available direct from Ditch Witch®

(refer to separate Radius Catalog for tooling and pricing)



DITCH WITCH DRILLING FLUIDS

got mud?got mud?



3. INSTA-VIS™ PLUS (after drilling fluid has completely yielded) 0.50 qts per 100 gallons of drilling fluid

4. DRILL-TERGE™ (after polymer has been fully blended into the system) 2.00 to 3.00 qts per 100 gallons of drilling fluid

3. REL PAC™ XTRA-LOW (Mix at high shear thru a venturi hopper to avoid fish eyes, clumping, and waste) Add 0.5–1.5 lbs per 100 gallons of existing drilling fluid.

4. SUSPEND-IT™ (after polymer has been fully blended into the system) 2.00 lbs per 100 gallons of drilling fluid

4. CLAY CUTTER™ (after drilling fluid has completely yielded) 14.00 ozs per 100 gallons of drilling fluid

5. DRILL-TERGE™ (after polymer has been fully blended into the system) 2.00 to 3.00 qts per 100 gallons of drilling fluid

3. INSTA-VIS DRY™ (after drilling fluid has completely yielded) 0.50 TO 3 lbs per 100 gallons of drilling fluid *Mix for 10 to 15 minutes to hydrate.

4. DRILL-TERGE™ (after polymer has been fully blended into the system) 2.00 to 3.00 qts per 100 gallons of drilling fluid 2.00 to 3.00 qts per 100 gallons of drilling fluid





got mud?got mud? 25 www.calditchwitch.com 866-382-3686


Never worryabout anotherpullback again!


Ditch Witch Central California7323 E. Manning AveFowler CA 93625

800-350-2595 Toll Free559-834-3998 Phone559-834-5751 Fax

Ditch Witch Northern California929 Stillwater Rd

West Sacramento, CA 95605800-655-6000 Toll Free916-371-6000 Phone916-371-6185 Fax

Ditch Witch Southern California1201 E 6th StreetCorona CA 92879

800-491-9004 Toll Free951-735-7510 Phone951-735-8480 Fax

Ditch Witch Bay Area8240 Enterprise Drive

Newark, California 94560800-510-6262 Toll Free510-657-5722 Phone510-657-5783 Fax

Ditch Witch El Cajon349 S. Marshall AveEl Cajon CA 92020619-448-0770 Phone619-448-0776 Fax

866-382-3686

dht v4 full catalog

Business

ditch witch ez

genuine ditch witch

ditch witchdesigned

ditch witchyou

ditch witch platinum

drill pipe manufacture

unlined drill rod

equipment new