DIN

16

DIN VERSION 0width 685 mm

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

SpecificationsOverall height sizes available: 940 mm (h5) – 1180 mm (h7) – 1390 mm (h8)Rated insulation voltage UI 690V.Connection to base according to DIN 43629.Easily disassembled front cross-piece for improved access. Total insulation.Hinged door complete with closing mechanism operated by a retracting handle and Y21 single-cipher safety lock (DIN18252 profile cylinder).Door opening side can be changed on site.Bottom plate with studs with M10 threaded inserts in UNI EN 12165 brass buried in the moulding and positioned in accordance with DIN 43629 standards.

Materials Made of fiberglass-reinforced plastic in RAL7038 colour. Thermoplastic resin handle. Operating tenon in galSpacezed steel. Internal rods and posts in steel with GEOMET 321 treatment. Concealed external hinges in stainless steel. Seals in foamed EPDM.

StandardsThe cabinet conforms to IEC EN 62208 standards. Protection class IP55-IP44 according to IEC EN 60529. Mechanical strength tests performed in accordance with standard IEC EN 61439-5.

External dimensions Space Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Door dimension Code Model

940 685 330 a 883 667 298 890 824x595IP55

IP44

072005101

072005200G0-5/5/T G0-5/5/T-4

1180 685 330 a 1130 667 298 1130 1064x595IP55

IP44

072007107

072007206G0-7/7/TG0-7/7/T-4

1390 685 330 a 1340 667 298 1340 1274x595IP55

IP44

072008105

072008204G0-8/8/TG0-8/8/T-4

Cabinet 1 compartment

NOTE: The product refers to the basic version of the cabinet and must be completed with the relative accessories for installation, to be ordered separately: frame in black coloured steel with 18/24 cataphoretic coating to be fixed to the floor or SMC plinth to be buried in the ground.

a

Dept

h 33

0 m

m

17

DIN

VER

SIO

N 0

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

External dimensions Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Code Model

900 684 326 300* 435 225 890 IP55 072009103 G0-5/Z

Depth Code Model

330 095777306 G7/TA

SpecificationsConnection to the cabinet with fixing template in accordance with standard DIN 43629. Removable upper front wall. H= height above ground*. Complete with cable fixing brackets in insulating material.

MaterialsMade of SMC in RAL 7038 grey colour.

Plinth fixed in the ground

SpecificationsScrews in AISI 304 stainless steel to guarantee access over time.Complete with brackets for fixing onto a concrete base

MaterialsMade of steel with black coloured 18/24 cataphoretic coating treatment.

Fixing frame

Dept

h 33

0 m

m

Maximum loadMaximum load that can be applied to the bottom plate and protected useful space for equipment, in accordance with the characteristics certified by standard IEC EN 62208. The table gives the maximum load that can be applied to the bottom plate installed on both the bottom wall and uprights (in the case of multiple compartments, the value refers to the individual compartments). Other installation modes may be able to support heavier weights. Protected useful space means the space used for assembling protection and control apparatus for which the IP protection is guaranteed by the enclosure.

Thermal power dissipation (Pmax. = watt)Calculation made in accordance with standard “IEC 17-43:

overtemperature determination method, by extrapolation, for non-standard (ANS) protection and control equipment assemblies for low voltage (LV panels)”.The thermal power dissipation values (Pmax=watt) of the cabinets given in the table are valid considering:• the habitual installation conditions (exposure on all sides);• 35°C constant ambient temperature;• overtemperature values obtained at half height [∆ T 0.5 (°C)] (value given in the table);• constant overtemperature values at the top ∆T 1.0 =30°C. Pmax(watt) is an overall value based on the entire cubicle structure. In the case of multiple compartments, the value must be divided by the number of compartments. The standard thermal dissipation value [Pmax(watt)] can be increased by installing air vents.

Maximum load - thermal power dissipation

Protected useful spaceMax load (Kg) ∆ T 0,5 (°C) Pmax (Watt) IP protectionHeight Width Depth Code Model

805 580 235 65 21,822,5

153 159

IP55

IP44

072005101

072005200G0-5/5/TG0-5/5/T-4

1045 580 235 80 20,8 21,5

185 193

IP55

IP44

072007107

072007206G0-7/7/TG0-7/7/T-4

1255 580 235 90 20,121,0

222 232

IP55

IP44

072008105

072008204G0-8/8/TG0-8/8/T-4

Optional: available as optional, dedicated bottom closing partition in different materials.

18

DIN VERSION 1width 910 mm

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

Cabinet 1 compartment

External dimensions Space Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Door dimension Code Model

940 910 330 a 883 892 298 890 824x820IP55

IP44

072105109

072105208G1-5/5/TG1-5/5/T-4

1180 910 330 a 1130 892 298 1130 1064x820IP55

IP44

072107105

072107204G1-7/7/TG1-7/7/T-4

1390 910 330 a 1340 892 298 1340 1274x820IP55

IP44

072108103

072108202G1-8/8/TG1-8/8/T-4

Dept

h 33

0 m

m

a

SpecificationsOverall height sizes available: 940 mm (h5) – 1180 mm (h7) – 1390 mm (h8)Rated insulation voltage UI 690V.Connection to base according to DIN 43629.Easily disassembled front cross-piece for improved access. Total insulation.Hinged door complete with closing mechanism operated by a retracting handle and Y21 single-cipher safety lock (DIN18252 profile cylinder).Door opening side can be changed on site.Bottom plate with studs with M10 threaded inserts in UNI EN 12165 brass buried in the moulding and positioned in accordance with DIN 43629 standards.

Materials Made of fiberglass-reinforced plastic in RAL7038 colour. Thermoplastic resin handle. Operating tenon in galSpacezed steel. Internal rods and posts in steel with GEOMET 321 treatment. Concealed external hinges in stainless steel. Seals in foamed EPDM.

StandardsThe cabinet conforms to IEC EN 62208 standards. Protection class IP55-IP44 according to IEC EN 60529. Mechanical strength tests performed in accordance with standard IEC EN 61439-5.

NOTE: The product refers to the basic version of the cabinet and must be completed with the relative accessories for installation, to be ordered separately: frame in black coloured steel with 18/24 cataphoretic coating to be fixed to the floor or SMC plinth to be buried in the ground.

19

DIN

VER

SIO

N 1

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

External dimensions Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Code Model

900 911 326 300* 630 225 890 IP55 072109101 G1-5/Z

SpecificationsConnection to the cabinet with fixing template in accordance with standard DIN 43629. Removable upper front wall. H= height above ground*. Complete with cable fixing brackets in insulating material.

MaterialsMade of SMC in RAL 7038 grey colour.

Plinth fixed in the ground

Dept

h 33

0 m

m

Protected useful spaceMax load (Kg) ∆ T 0,5 (°C) Pmax (Watt) IP protectionHeight Width Depth Code Model

805 805 235 70 22,5 23,3

218 228

IP55

IP44

072105109

072105208G1-5/5/TG1-5/5/T-4

1045 805 235 90 21,7 22,5

270 281

IP55

IP44

072107105

072107204G1-7/7/TG1-7/7/T-4

1255 805 235 100 21,0 21,6

302 314

IP55

IP44

072108103

072108202G1-8/8/TG1-8/8/T-4

Depth Code Model

330 095779302 G9/TA

SpecificationsScrews in AISI 304 stainless steel to guarantee access over time.Complete with brackets for fixing onto a concrete base

MaterialsMade of steel with black coloured 18/24 cataphoretic coating treatment.

Fixing frame

Maximum loadMaximum load that can be applied to the bottom plate and protected useful space for equipment, in accordance with the characteristics certified by standard IEC EN 62208. The table gives the maximum load that can be applied to the bottom plate installed on both the bottom wall and uprights (in the case of multiple compartments, the value refers to the individual compartments). Other installation modes may be able to support heavier weights. Protected useful space means the space used for assembling protection and control apparatus for which the IP protection is guaranteed by the enclosure.

Thermal power dissipation (Pmax. = watt)Calculation made in accordance with standard “IEC 17-43:

overtemperature determination method, by extrapolation, for non-standard (ANS) protection and control equipment assemblies for low voltage (LV panels)”.The thermal power dissipation values (Pmax=watt) of the cabinets given in the table are valid considering:• the habitual installation conditions (exposure on all sides);• 35°C constant ambient temperature;• overtemperature values obtained at half height [∆ T 0.5 (°C)] (value given in the table);• constant overtemperature values at the top ∆T 1.0 =30°C. Pmax(watt) is an overall value based on the entire cubicle structure. In the case of multiple compartments, the value must be divided by the number of compartments. The standard thermal dissipation value [Pmax(watt)] can be increased by installing air vents.

Maximum load - thermal power dissipation

Optional: available as optional, dedicated bottom closing partition in different materials.

20

DIN VERSION 2width 1150 mm

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

Cabinet 1 compartment

External dimensions Space Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Door dimension Code Model

940 1150 330 a 883 1132 298 890 824x1060IP55

IP44

072205107

072205206G2-5/5A/TG2-5/5A/T-4

1180 1150 330 a 1130 1132 298 1130 1064x1060IP55

IP44

072207103

072207202G2-7/7A/TG2-7/7A/T-4

1390 1150 330 a 1340 1132 298 1340 1274x1060IP55

IP44

072208101

072208200G2-8/8A/TG2-8/8A/T-4

Dept

h 33

0 m

m

a a

SpecificationsOverall height sizes available: 940 mm (h5) – 1180 mm (h7) – 1390 mm (h8)Rated insulation voltage UI 690V.Connection to base according to DIN 43629.Easily disassembled front cross-piece for improved access. Total insulation.Hinged door complete with closing mechanism operated by a retracting handle and Y21 single-cipher safety lock (DIN18252 profile cylinder).Door opening side can be changed on site.Bottom plate with studs with M10 threaded inserts in UNI EN 12165 brass buried in the moulding and positioned in accordance with DIN 43629 standards.

Materials Made of fiberglass-reinforced plastic in RAL7038 colour. Thermoplastic resin handle. Operating tenon in galSpacezed steel. Internal rods and posts in steel with GEOMET 321 treatment. Concealed external hinges in stainless steel. Seals in foamed EPDM.

StandardsThe cabinet conforms to IEC EN 62208 standards. Protection class IP55-IP44 according to IEC EN 60529. Mechanical strength tests performed in accordance with standard IEC EN 61439-5.

NOTE: The product refers to the basic version of the cabinet and must be completed with the relative accessories for installation, to be ordered separately: frame in black coloured steel with 18/24 cataphoretic coating to be fixed to the floor or SMC plinth to be buried in the ground.

21

DIN

VER

SIO

N 2

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

SpecificationsConnection to the cabinet with fixing template in accordance with standard DIN 43629. Removable upper front wall. H= height above ground*. Complete with cable fixing brackets in insulating material.

MaterialsMade of SMC in RAL 7038 grey colour.

External dimensions Internal dimension Space feature IP protectionHeight Width Depth Height Width Depth Size Code Model

900 1149 326 300* 960 225 890 IP55 072209109 G2-5/Z

Plinth fixed in the ground

Dept

h 33

0 m

m

Protected useful spaceMax load (Kg) ∆ T 0,5 (°C) Pmax (Watt) IP protectionHeight Width Depth Code Model

805 1025 235 90 23,0 24,0

277 289

IP55

IP44

072205107

072205206G2-5/5A/TG2-5/5A/T-4

1045 1025 235 95 22,3 23,0

343 357

IP55

IP44

072207103

072207202G2-7/7A/TG2-7/7A/T-4

1255 1025 235 100 21,7 22,4

367382

IP55

IP44

072208101

072208200G2-8/8A/TG2-8/8A/T-4

Depth Code Model

330 095771309 G12/TA

SpecificationsScrews in AISI 304 stainless steel to guarantee access over time.Complete with brackets for fixing onto a concrete base

MaterialsMade of steel with black coloured 18/24 cataphoretic coating treatment.

Fixing frame

Maximum loadMaximum load that can be applied to the bottom plate and protected useful space for equipment, in accordance with the characteristics certified by standard IEC EN 62208. The table gives the maximum load that can be applied to the bottom plate installed on both the bottom wall and uprights (in the case of multiple compartments, the value refers to the individual compartments). Other installation modes may be able to support heavier weights. Protected useful space means the space used for assembling protection and control apparatus for which the IP protection is guaranteed by the enclosure.

Thermal power dissipation (Pmax. = watt)Calculation made in accordance with standard “IEC 17-43:

overtemperature determination method, by extrapolation, for non-standard (ANS) protection and control equipment assemblies for low voltage (LV panels)”.The thermal power dissipation values (Pmax=watt) of the cabinets given in the table are valid considering:• the habitual installation conditions (exposure on all sides);• 35°C constant ambient temperature;• overtemperature values obtained at half height [∆ T 0.5 (°C)] (value given in the table);• constant overtemperature values at the top ∆T 1.0 =30°C. Pmax(watt) is an overall value based on the entire cubicle structure. In the case of multiple compartments, the value must be divided by the number of compartments. The standard thermal dissipation value [Pmax(watt)] can be increased by installing air vents.

Maximum load - thermal power dissipation

Optional: available as optional, dedicated bottom closing partition in different materials.

22

DIN

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

685 330

260

e

M10

16

223

160

A

I

c

Code Model IP protection A e c I

072005101

072005200G0-5/5/TG0-5/5/T-4

IP55IP44

940 529 453 495

072007107

072007206G0-7/7/TG0-7/7/T-4

IP55IP44

1180 529 453 495

072008105

072008204G0-8/8/TG0-8/8/T-4

IP55IP44

1390 529 453 495

DIN VERSION 0width 685 mm

Technical drawings

23G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

910 330

260

e

M10

16

223

160

A

I

c

Code Model IP protection A e c I

072105109

072105208G1-5/5/TG1-5/5/T-4

IP55IP44

940 754 648 690

072107105

072107204G1-7/7/TG1-7/7/T-4

IP55IP44

1180 754 648 690

072108103

072108202G1-8/8/TG1-8/8/T-4

IP55IP44

1390 754 648 690

DIN VERSION 1width 910 mm

Technical drawings

24

DIN

G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

1150 330

245

e 147 e

16

160

223

A

c

i

M10

DIN VERSION 2width 1150 mm

Code Model IP protection A e c I

072205107

072205206G2-5/5A/TG2-5/5A/T-4

IP55IP44

940 424 960 1020

072207103

072207202G2-7/7A/TG2-7/7A/T-4

IP55IP44

1180 424 960 1020

072208101

072208200G2-8/8A/TG2-8/8A/T-4

IP55IP44

1390 424 960 1020

Technical drawings

25G E N E R A L C A T A L O G U E G R A F I • C O N C H I G L I A S P A

160 225

c

B

a

A

268

326

300 280

280900

Code Model A B a c

072009103 G0-5/Z 684 495 543 435

072109101 G1-5/Z 911 690 738 630

072209109 G2-5/Z 1149 1020 1068 960

DIN

Technical drawings

Plinth fixed in the ground