directorate of employment and training, chhattisgarh, nawa
TRANSCRIPT
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 1 1 Allen Key, Set of 12 Pieces (2mm to 14mm) Made Venedium Pentaoxide/ Fully
hardened carbon steel
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
55
DM 2 2 Inside Caliper 15 cm Spring joint made of High Quality Polished steel with ground
finished points
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 3 3 Outside Calipers 15 cm Spring joint made of High Quality Polished steel with
ground finished points
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 4 4 Centre punch 10 mm Dia. X 100 mm. made of H.C.S.
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 5 5 Dividers spring type 15cm, made of H.C.S.
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 6 6 SCREW DRIVER 250 MM (6.0X250) MM- FLAT TIP
Type of Screw Drivers Engineers Screwdrivers
Screw Driver Point Size or Tip Size (a x b) in mm x mm 0.8 x 6.0
Length of Blade in mm 250
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 7 7 BALL PEEN HAMMER WITH HANDLE
Nominal Mass (Grams) 500
Type of Hammers - ball peen hammer
Handles Requirement - Yes
Material of Handles - Wood
Name of the wood -Timber Hickory wood
Length Of the Handles (in mm) - 300 - 305
Made of drop forged steel, hardened & tempered with ground & polished faces
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 8 8 Hand file flat 20 cm, second cut made of high Carbon Steel
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 9 9 Philips Screw Driver Set of 5 Piece (100mm to 300 mm.) Unbreakable cellulose
acetate Transparent Handle & alloy steel Rod.
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
Directorate of Employment and Training, Chhattisgarh, Nawa Raipur, Atal Nagar, Distt - Raipur
Proposal for Purchasing of Tools, Equipments and Machinaries As per TENDER For Financial Year
2019-20 ( LWE )
Mechanic Diesel Trade related Tools, Equipment & Machinery Items
Bill Of Quantity
Trainee's Tol kit & Instrument
Page 1 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 10 10 Combination Plier/ Made of chrome venadium steel, Double polished head & joint
Type of Insulation - Plastic Insulation/Electrical insulation
Type of Cutter - Middle Cutter With Induction hardened cuttin edge
Type of Gripping Surface - Serrated
Shape of Handles- Bowed handle
Handle Finish - Plastic coated or with plastic sleeves for non slip comfort grip
Length of Hand Tool in mm 200
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
53
DM 11 11 Screw driver 20 cm x 9 mm blade, Unbreakable cellulose acetate Transparent
Handle & alloy steel Rod.
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 12 12 Screw driver 30 cm x 9 mm blade, Unbreakable cellulose acetate Transparent
Handle & alloy steel Rod.
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
54
DM 13 13 Scriber 15 cm.made of high Carbon Steel & Knurled Head
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 14 14 Spanner D.E. set of 12 size 6 -32 mm (open jaw) drop forged, chromium vanadium
steel .
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
55
DM 15 15 Ring spanner set of 12, Metric 6 -32 mm drop forged, chromium vanadium steel .
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 16 16 Spanners socket with speed handle 1/2 inch Square Drive T-Bar ratchet and
universal upto 32 mm set of 28 pieces with box
Made of drop forged, chromium vanadium steel .
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
55
DM 17 17 Steel Ruler Scale (30 cm x 2.5 cm x 0.5 cm, Silver)
Material spring Steel
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 18 18 Steel tool box with locks and keys Triple Decker. (folding type) 400x200x150 mm
MAKE- TAPARIA/ GROZ/NITCO /STANLEY/EASTMAN/ SAMRAT/
KRISTEEL/JK/ SUNFLOWER
56
Page 2 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 19 19 Type Of Joint- Lay-on joint
Handle Finish- Plastic coated or with plastic sleeves,
Tool Finish- Polished.
Type Of Gripping Surface- Plain
Shape Of Handles- Bowed handle
Type Of Cutter- Middle Cutter
With Electrical Insulation
Type Of Insulation- Plastic Insulation
Type Of Hand ToolWire stripping Plier
Material - Carbon Steel
Length Of Hand Tool In Mm- 154
MAKE- TAPARIA/
GROZ/NITCO/STANLEY/EASTMAN/SAMRAT/KRISTEEL/JK/SUNFLOWER
56
DM 20 20 Adjustable spanner (pipe wrench 350 mm) made out of drop forged from chromium
vanadium steel, serrated jaws with knurled adjusting nut
Jaw capacity - 50 mm
Make - TAPARIA /ESTMAN /STANLEY/NITCO/GROZ
8
DM 21 21 Air bow gun with Accessories. Comfortable pistol grip,Quick easy trigger action &
removable nozzle With Hose Pipe & assorted Connector, Integral Air control valve
1/4 inch BSPT inlet with 100 - 110 long angled nozzle
Working press. : 3 bar - 10 bar
Temp. range : -10 to 50 Degree centigrade
4
DM 22 22 Allen Key Set of 12 Pieces (2mm to14mm) made of Venedium Pentaoxide
MAKE- TAPARIA/GROZ/EASTMAN/ STANLEY/NITCO
16
DM 23A 23 Ammeter 300 A DC with external shunt
Make - AE / MECO / ABBLTT / ME
8
DM 23B 24 Ammeter 60 A DC with external shunt
Make - AE / MECO / ABBLTT / ME
8
DM 26 25 Angle Plate adjustable 250X150X175 mm made of closed grain C. I.
MAKE – Apex /SAMRAT / GROZ / STANLEY / EASTMAN
4
DM 27 26 Angle Plate size 200X100X200 mm. made of closed grain C. I.
MAKE – Apex /SAMRAT / GROZ / STANLEY / EASTMAN
8
DM 28 27 Anvil 50 Kgs with Stand,single bick,high tensile strength made of cast iron.
MAKE – BANDSON /SAMRAT / GROZ / STANLEY / EASTMAN
4
DM 30 28 Battery Charger
Voltage : 6V-12V18V-24V,Input volt -230V/50Hz,Output Volt -24V DC, Two
stage Charging [Normal + Trickling charging]
With Rotary swicth to select VOLT & AMP.
Ammeter Display, Main switch, +- Knob,
Crocodile Connector with wire 2ft in length,
Aligator Clips, High Current Charging upto 15 Ampere, Circuit Breaker for Reverse
battery, Auto Cut off After Charging
MAKE - AE/MEW/ME/RE
8
DM 31 29 Blow Lamp 1 litre
Application - Heating
An effective blow torch for all tin soldering and simillar heating works
8
DM 32 30 Belt Tensioner gauge- work with all belt-drive models with a 10-pound
specification.
4
DM 33 31 Caliper Inside 15 cm Spring joint made out of H.C.S.
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN
16
DM 34 32 Caliper Outside 15 cm Spring joint made out of H.C.S.
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN
16
DM 36 33 Chain pulley Block-3 ton capacity with tripod stand operating chain & hook with
Load carrying Chain up to 4 metre high.
Running test load - 4.5 Ton
Load chain Dia- 8 mm
Number of columns of load chain - 2
MAKE – INDER / LOKPAL/ OIL LUBE/INDFF
4
Equipment & Machinery
Page 3 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 37 34 Chisel 10 cm flat (cold flat) made of Tool Carbon Steel.
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO/MIRANA
16
DM 38 35 Chisel cross cut 200 mm X 6 mm made of High Carbon Steel.
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO/MIRANA
16
DM 39A 36 Circlip pliers External
Type - Straight
Material Alloy Steel
Length of Hand Tool in mm 150 - 175
Handle Finish Plastic coated or with plastic sleeves,
Type of Gripping Surface Plain
Shape of Handles Straight handle
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
16
DM 39B 37 Circlip pliers External
Type - Straight
Material Alloy Steel
Length of Hand Tool in mm 200
Handle Finish Plastic coated or with plastic sleeves,
Type of Gripping Surface Plain
Shape of Handles Straight handle
MAKE - GROZ / STANLEY / EASTMAN / NETCO /TAPARIA
16
DM 39C 38 Circlip pliers Internal
Type - Straight
Material Alloy Steel
Length of Hand Tool in mm 150 - 175
Handle Finish Plastic coated or with plastic sleeves,
Type of Gripping Surface Plain
Shape of Handles Straight handle.
MAKE – TAPARIA / GROZ / STANLEY / EASTMAN / NETCO
16
DM 39D 39 Circlip pliers Internal
Type - Straight
Material Alloy Steel
Length of Hand Tool in mm 200
Handle Finish Plastic coated or with plastic sleeves,
Type of Gripping Surface Plain
Shape of Handles Straight handle.
MAKE –TAPARIA / GROZ / STANLEY / EASTMAN / NETCO
16
DM 40 40 Clamp C 100mm made of High Quality Steel with anti twist cast ribbed frame
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
8
DM 41 41 Clamp C 150mm made of High Quality Steel with anti twist cast ribbed frame
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
8
DM 42 42 Clamp C 200mm made of High Quality Steel with anti twist cast ribbed frame
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
8
DM 43 43 Cleaning Tray 45X30 cm. made by Galvonize sheet-Thikness-18 SWG 16
DM 45 44 Connecting rod alignment fixtrue with all attachments. Made of Forged steel. 4
DM 46 45 Copper bit soldering iron 0.25 kg (Fire heated Type) 16
DM 47 46 Cylinder Dial bore gauge, capacity -20 to 160 mm
with sutaible attachment in a Box.
16
DM 48A 47 Cylinder liner-Dry Type, press fit ,made out of Cast Iron. 4
DM 48B 48 Cylinder liner-Wet Type, slide fit liner ,made out of Cast Iron. 4
DM 49 49 DC Ohmmeter 0 to 300 Ohms, mid scales at 20 Ohms
MAKE - AE/MECO/ABOVLT/ME
8
DM 50 50 Depth Micrometer 0-25 mm , made of Nickel chromium steel
Make – Mitutoyo/Mahr/ Groz/ Starrett/Sylvac/Capri/Fowler
16
DM 51 51 Dial gauge type 1 Gr. A (Complete with clamping devices with magnetic stand) to
read 0.01 mm.
Make – Mitutoyo/Mahr/ Groz/ Starrett/Sylvac/Capri/Fowler
16
Page 4 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 52 52 Different type of Engine Bearing Model, Shell type(with Collar & with out collar) &
Bush Bearing.
4
DM 53 53 Different type of Piston Model (Torridal ,Flat ,Dome,Deflector,Cavity, Valve Recess
Type Head)
4
DM 54 54 Dividers 15 cm spring joint made of H.C.S.
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
16
DM 55 55 Drift punch, Made of Copper 15 cm.
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
16
DM 56 56 Drill point angle gauge-Chrome clad with etched graduations. For use with drills
with either a 118- or 135-degree included angle point.
4
DM 57 57 Drill twist 1.5 mm to 15 mm (various size) by 0.5 mm high speed steel, ground
flute, paallel shank drill, set of 28 piece supplied in indexing metal case.
Tensile strength up to 1000 N/sqmm, tin coated with point angle - 118 dgree,
Tolrance of Dia- h8,Tolrance of shank- f11& other parameters-Normal.
16
DM 58A 58 Electrician Sodering Iron 25 watts /230 volts with 1.5- 2 meter electrical cord, 16
Amp 3 pin plug, supplied with double flat nickel plated tip
Tip size - 3 mm (straight)
8
DM 58B 59 Electrician Sodering Iron 60 watts/230 volts with1.5- 2 meter electrical cord 16
Amp 3 pin plug, supplied with double flat nickel plated tip
Tip size - 6 mm (offset)
8
DM 59 60 Shape of Blade - Round
Type of Screw Drivers - Electricians Screwdrivers
Length of Blade in mm - 150
Size of Head - M 1.6
Length of Handle in mm - 50
blade fully insulated
16
DM 60 61 Engineer's square 15 cm Blade-made out of Tool steel
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
16
DM 61 62 Engineer's stethoscope 4
DM 62 63 Feeler gauge 20 blades
Range 0.05 mm to 1.0 mm.
Blade Length-100 mm made out of chromium steel, hardened and polished
Make – Mitutoyo/Mahr/ Groz/ Starrett/Sylvac/Capri/Fowler
16
DM 63 64 File flat 20 cm bastard high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 64 65 File, Half round 20 cm second cut high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 65 66 File square 20 cm second cut high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 66 67 File square 30 cm Rough cut high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 67 68 File Traiangular 15 cm Second cut high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 68 69 File assorted, Size- 14cm and Type- second cut including safe edge (20 Nos.) made
of High carbon steel.
MAKE – JK / TAPARIA / SUN FLOWER
8
DM 69 70 Flat file 25 cm second cut high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 70 71 Flat fiel 30cm bastard high carbon steel
MAKE – JK / TAPARIA / SUN FLOWER
16
DM 71 72 Fuel feed pump Plunger Type ,Double Acting for Diesel Engine.
MAKE – BOSCH / MICO /TATA/ ASHOK LEYLAND/MAHINDRA/IMT
4
DM 72 73 Fuel injection pump (Diesel) inline (multi cylinder) Four cylinder.
MAKE – BOSCH / MICO /TATA/ ASHOK LEYLAND/MAHINDRA/IMT
4
DM 73 74 Fuel injection pump dismantling tool kit/Universal vice
MAKE – BOSCH / MICO /TATA/ ASHOK LEYLAND/MAHINDRA/IMT
4
Page 5 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 74A 75 Fuel injection pump VE pump along with special tools and accessories
MAKE – BOSCH / MICO /TATA/ ASHOK LEYLAND/MAHINDRA/IMT
4
DM 74B 76 Fuel injection pump Distributor fuel rotary pump (DPC) pumps/ along with special
tools and accessories.
MAKE – BOSCH / MICO /TATA/ ASHOK LEYLAND/MAHINDRA/IMT
4
DM 75 77 Leather Hand Gloves 14 inches
approximately 14 inches.
ISI MARKED
20
DM 76 78 Glow plug tester
Works on all types of glow plugs - any voltage: 4.4v/5v/7v/8.5v/10v/ 11v, plus
many more
Displays open & short circuit
Internal 9 volt battery & Low warning indicator
Auto shut-off when not being used
Protected with oil-resistant rubber boot .
8
DM 77 79 Granite surface plate 1600 X 1000 with stand and cover
Make – Luthara/ Jash/ Mitutoyo/ Groz / Mahr.
4
DM 78 80 Grease Gun, Lever type, steel metalbody with air bleeder & capacity- 445 to 500 cc.
Pressure up to 400 bar/ 6000psi with offset nozzel.
8
DM 79 81 Grease Gun heavy duty trolley type 10 kg capacity with hose & adoptor 4
DM 80 82 Growler
made by using very high quality raw material which ensures high durability at its
user end.
Armature Dia. : 20 mm to 100 mm.
8
DM 81 83 Hacksaw frame adjustable 20-30 cm with D style handle
MAKE - MIRANDA/NETCO/VENUS/TAPARIA
40
DM 82 84 Hammer ball peen - 0.75kg
Nominal Mass (Grams) - 800
Material of Handles - Teak Wood
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
16
DM 83 85 Hammer Chipping 0.25 kg Drop Forged Steel With teak wood handle
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
20
DM 84 86 Hammer copper 1 Kg with Teak wood handle
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
16
DM 85 87 Hammer Mallet wooden 1/2 kg. head Dia- 50- 55mm
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
16
DM 86 88 Hammer Mallet Plastic 250 Gram, head Dia- 50- 55mm
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
16
DM 87A 89 Hand operated crimping tool, for crimping up to 4mm
MAKE – SAMRAT / STANLEY / NITCO / GROZ
4
DM 87B 90 Hand operated crimping tool, for crimping up to 10 mm
MAKE – SAMRAT / STANLEY / NITCO / GROZ
4
DM 88 91 Hand reamers adjustable Sizes - 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 mm to
14.25 mm & 14.25 to 15.75 mm, Made of High Carbon steel.
MAKE – MIRANDA / IT / ADDISON
8
DM 89 92 Hand shear universal 250mm made out of Mild steel & cutting edge is High carbon
Steel.
8
DM 90 93 Hand vice - Length overall 100mm, Width of Jaw - 35 mm . Manufactured from
S.G. ductile iron. Steel main screw is plated which prevents corrosion.
MAKE – APEX / STANLEY / GROZ / NITCO
8
DM 91 94 Hollow punch set of seven pieces 6mm to 15 mm ,made of High Carbon Steel.
MAKE – SAMRAT / STANLEY / NITCO / GROZ
8
DM 92 (A) 95 Injector - Multi hole type
MAKE – MICO / NEO / BOSCH/PENTA/AUTONICS
16
Page 6 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 92 (B) 96 Injector - Pintle type.
MAKE – MICO / NEO / BOSCH/PENTA/AUTONICS
16
DM 94 97 Injector testing set ( Hand Operated)
For Nozzel size-P,R,S & T,Pressure Gauge-0-400 bar.,connecting theread size-
M12x1.5,M14x1.5
MAKE - Mico / bosch/ IMT / Hanspal/Autonic.
4
DM 95 98 Insulated screw driver 20 cm to 9 mm blade Unbreakable cellulose acetate
Transparent Handle & alloy steel Rod.
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN/GRIP
16
DM 96 99 Insulated screw driver 30 cm to 9 mm blade Unbreakable cellulose acetate
Transparent Handle & alloy steel Rod.
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN/GRIP
16
DM 97 100 Left cut snips 250 mm made of dropforged chrome vanadium steel, with antislip
gaurd coated handle.
16
DM 98A 101 Lifting jack screw type 3 ton capacity Heavy Duty Type 4
DM 98B 102 Lifting jack screw type 5 ton capacity Heavy Duty Type 4
DM 98C 103 Lifting jack screw type 20 ton capacity Heavy Duty Type 4
DM 99 104 Magneto spanner set with 8 spanners set 4
DM 100 105 Magnifying glass 75 mm diameter with suitable stainless steel Frame and 10x
magnification.
8
DM 101 106 Marking out table 90X60X90 cm, made of Cast Iron with Stand. 4
DM 102 107 Digital Multimeters, 3.5 digit handheld type
Basic DC accuracy 0.5%-CAT III 750 V Safety Rated
Diode and continuity test test with buzzer
(small lightweight design for one handed use Rugged, durable design)
Automatic shutdown, Battery can be Replace after Use
Electrical Specification -
Voltage Range AC - (40-50 Hz) - 0.1 mV to 750 Volt
Voltage Range DC - 0.1 mV- 750.0 V
Current Capacity - Upto 10 A
Resistance (Resistance range in Ohm) -
0.1 Ohm - 50M-Ohm
Capacitance - Range
50.00 nF-10000 µF
MAKE- AE/MECO/ABOVLT/ME/RISHUB
20
DM 103A 108 Oil can 0.5 liter capacity,metal body with steel pump. 8
DM 103B 109 Oil can 0.25 liter capacity,metal body with steel pump. 8
DM 104 110 Oil pump for the dismantling and assembling Gear type used in automobile engine. 8
DM 105 111 Oil stone 15 cm X 5 cm X 2.5 cm 4
DM 107 112 Outside Micrometer 0 to 25 mm made out of Nickel Chromium Steel and frame cast
steel with tungusten carbide tipped anvil and fine adjustment ratchet, L.C. 0.01 mm
Make – Mitutoyo/Mahr/Groz/ Starrett/Sylvac/Capri/Fowler
16
DM 108 113 Outside Micrometer 25 to 50 mm made out of Nickel Chromium Steel and frame
cast steel with tungusten carbide tipped anvil and fine adjustment ratchet, L.C. 0.01
mm
Make – Mitutoyo/Mahr/Groz/ Starrett/Sylvac/Capri/Fowler
16
DM 109 114 Outside Micrometer 50 to 75 mm made out of Nickel Chromium Steel and frame
cast steel with tungusten carbide tipped anvil and fine adjustment ratchet, L.C. 0.01
mm
Make – Mitutoyo/Mahr/Groz/ Starrett/Sylvac/Capri/Fowler
4
DM 110 115 Outside Micrometer 75 to 100 mm made out of Nickel Chromium Steel andframe
cast steel with tungusten carbide tipped anvil and fine adjustment ratchet, L.C. 0.01
mm
Make – Mitutoyo/Mahr/Groz/ Starrett/Sylvac/Capri/Fowler
4
DM 111 116 Philips Screw Driver Set of 5 Piece (100mm to 300 mm.) Unbreakable cellulose
acetate Transparent Handle & alloy steel Rod.
MAKE – TAPARIA / STANLEY / GROZ / NITCO / EASTMAN /GRIP
8
DM 112 117 Pipe cutting tools.
Capacity - 6 mm to 50 mm (outside diameter pipe) made of H.C.S.
8
Page 7 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 113 118 Pipe flaring tools for producing 45° flares in soft copper, brass, aluminum and mild
steel tubing with heat treated drop forged yoke.
Capacity - 3/16" - 5/8"
8
DM 114 119 Piston ring compressor -
Capacity : 50 - 125mm diameter.
Height - 80mm (approx 3.15").
complete with steel key,Made of Tempered spring steel.
Key operated with Ratchet Mechanism and safety valve.
8
DM 115 120 Piston Ring Expander and remover-Piston Ring Pliers, (Expander, remover &
Installer ) Professional size - 50-125 mm
Made of Nickel Plated steel with self adjusting spring tensioned mechanism
with PVC handle for extra grip
8
DM 116 121 Piston Ring groove Cleaner
For the removal of carbon deposits from piston ring grooves. Suitable for piston
sizes from 51 to 127mm, supplied with 3 different size cutter set & each size having
6 blade .
Cutter size-1 : 1/16"-5/64"-3/32"-1/8"-5/32"-3/16", Cutter size-2 :
2.0/2.5/3.0/4.0/4.5mm & 1/4", Cutter size-3 : 1.2/1.5/1.8/2.8/5.0/5.5mm.
4
DM 117 122 Combination Plier/ Made of chrome venadium steel, Double polished head & joint
Type of Insulation - Plastic Insulation/Electrical insulation
Type of Cutter - Middle Cutter With Induction hardened cuttin edge
Type of Gripping Surface - Serrated
Shape of Handles- Bowed handle
Handle Finish - Plastic coated or with plastic sleeves for non slip comfort grip
Length of Hand Tool in mm 200
MAKE – TAPARIA / STANLEY / GROZ / NITCO / EASTMAN /GRIP
8
DM 118 123 Pliers flat nose 15 cm with instulated handle Drop Forged from chromium vanadium
steel induction hardened jaws fitted with moulded sleeves.
MAKE – TAPARIA / STANLEY / GROZ / NITCO / EASTMAN /GRIP
8
DM 119 124 Plires round nose 15 cm with instulated handle Drop Forged from chromium
vanadium steel induction hardened jaws fitted with moulded sleeves.
MAKE – TAPARIA / STANLEY / GROZ / NITCO / EASTMAN /GRIP
8
DM 120 125 SIDE CUTTING PLIERS 150MM
Type of Cutter Middle Cutter
Shape of Handles Bowed handle
Type of Joint Lay-on joint
Tool Finish Polished.
Type of Gripping Surface Plain
Type of Insulation Plastic Insulation
Electrical insulation true
Handle Finish Smooth finished
Type of Hand Tool Side Cutting Pliers as per IS 4378
Material Alloy Steel
Weight of hand tools in Grams 170
Length of Hand Tool in mm 154
MAKE – TAPARIA / STANLEY / GROZ / NITCO / EASTMAN /GRIP
8
DM 121 126 Portable electric drill machine
Product Type : Impact Drill
Category : Power Drills
Weight : 1.5 KG
Wattage : 500 W, 240 Volt
Speed : 0-2600 RPM
Drilling Capacity in Metal : 10 mm
Drilling Capacity in Concrete : 13 mm
Drilling Capacity In Masonary : 15 mm
4
DM 122 127 Prick punch 15 cm made of High carbon Steel. 16
Page 8 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 123A 128 Letter Punch Set- 4mm , made of draw carbon steel nickel plated with chamfered
edges.
Make- Samrat/ Groz/Stanley/Nitco
8
DM 123B 129 Number Punch Set- 4mm , made of draw carbon steel nickel plated with chamfered
edges.
Make- Samrat/ Groz/Stanley/Nitco
8
DM 124 130 Radiator cut section cross flow For demonstration purpose 4
DM 125 131 Radiator cut section Down flow For demonstration purpose 4
DM 126 132 Radiator pressure cap - 0.7 bar pressure for main valve & 0.1 bar ( max.) for
vaccume valve
8
DM 127 133 Right cut snips 250 mm made of Harden steel 8
DM 128 134 Rivet sets snap and Dolly combined (3mm, 4mm, 6mm each) 8
DM 129 135 Scraper flat 25 cm made of High speed Steel. 8
DM 130 136 Scraper half round 25 cm made of High Speed Steel. 8
DM 131 137 Scraper Triangular 25 cm made of High Speed Steel. 8
DM 132 138 Scriber 15 cm. made of High Speed Steel. 8
DM 133 139 Scriber with scribing block universal made of High carbon Steel, pillar height - 230 -
305 mm & base dimension 80x30 mm
8
DM 134 140 Set of stock and dies -Metric size
Thread Size Range : M3-M12
Die Stocks -20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14
Material -MS, encased in a suitable rubber /plastic box.
Make - Samrat/Taparia/Nitco/Eastman/
8
DM 135 141 Shear TinMan's 450 mm X 600 mm 8
DM 136 142 Sheet Metal Gauge-Metric type made of Stainless steel 8
DM 137 143 Shear Tinmans 300 mm 16
DM 138 144 Solding Copeer Hatchet type 500 gms (Fire heated) 8
DM 140 145 Spanner Clyburn 15 cm drop forged, chromium vanadium steel .
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
4
DM 141 146 Spanner D.E. set of 12 size 6 -32 mm (open jaw) drop forged, chromium vanadium
steel .
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
16
DM 142 147 Spanner T. flocks for screwing up and up screwing inaccessible drop forged,
chromium vanadium steel size- 8 mm, 10mm, 11mm, 12mm , 13mm & 14 mm.
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
8
DM 143 148 Spanner adjustable 15 cm drop forged, chromium vanadium steel with hardened
parallel grooved jaw & with self locking design
jaw capacity - up to 24 mm.
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
8
DM 144 149 Ring spanner set of 12 metric 6 -32 mm drop forged, chromium vanadium steel .
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
14
DM 145 150 Spanners socket with speed handle 1/2 inch Square Drive T-Bar ratchet and
universal upto 32 mm set of 28 pieces with box
Made of drop forged, chromium vanadium steel .
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
8
DM 146 151 Spark lighter -Igniting welding blowpipe & cutting blowpipe. 8
DM 147 152 Spark plug spanner 14 mm X 18 mm Size 8
DM 148(A) 153 Starter motor axial type (LMV) for 12 V/ 180 amp/hr, battery capacity,
System - Earth return
Direction of rotation - clockwise (viewed from pinion end)
power output - 2.7 KW
meshing rpm - 600 - 700
Current - 85 - 100 amps
make - lucas / tvs / mico
4
Page 9 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 148(B) 154 Starter motor Co-Axial Type (LMV) for 12 V/ 180 amp/hr, battery capacity,
System - Earth return
Direction of rotation - clockwise (viewed from pinion end)
power o/p - 2.7 KW
meshing rpm - 600 - 700
Current - 85 - 100 amps
make - lucas / tvs / mico
4
DM 148(C) 155 Starter motor Pre Engaement Type (LMV) for 12 V/ 180 amp/hr, battery capacity,
System - Earth return
Direction of rotation - clockwise (viewed from pinion end)
power o/p - 2.7 KW
meshing rpm - 600 - 700
Current - 85 - 100 amps
make - lucas / tvs / mico
4
DM 149 156 Steel measuring tape 10 meter in a case.
MAKE – TAPARIA / STANLEY / NITCO / GROZ / EASTMAN
16
DM 150 157 Nominal Size (cm) 15
Type of Steel Scale (Graduation on both edges) AA
MAKE - KRISTEEL/TECHNIK/TAPARIA/STENLEY
16
DM 151 158 Nominal Size (cm) 30
Type of Steel Scale (Graduation on both edges) AA
MAKE - KRISTEEL/TECHNIK/TAPARIA/STENLEY
16
DM 152 159 Straight edge gauge 2 feet made of mild steel hardened & chrome platting. 8
DM 153 160 Straight edge gauge 4 feet made of mild steel hardened & chrome platting. 8
DM 154 161 Size (mm): 6,8,10
Made of HCS
Type - Spiral flute
8
DM 155 162 Stud remover with socket Handle
Range - 5/16 - 3/4" Or 7 - 19 mm
size - 58 mm outside dia X 65 mm high
Made of chrome alloyed steel
4
DM 156 163 Surface gauge with dial test indicator plunger type spherical tip L.C. 0.01 mm
Range - 10 mm
Dial dia. range - 35 - 50 mm
MAKE - MITUTOYO/GROZ/MAHR/SALVAC
16
DM 157 164 Tachometer (Counting type)
Photo Tach-5 to 100,000 RPM autoranging
Contact Tach- 0.5 to 20,000 RPM autoranging
Surface Speed- 0.2 to 6,560 ft/min, 0.05 to 2,000 m/min
Display-5 digit, 0.4" LCD with function enunciator
Resolution-0.1 RPM, 0.1 ft/min, 0.01 m/min
Power 4 x AA batteries
Accessories RPM cone adapter, RPM funnel adapter, surface speed test wheel,
reflective tape, carrying case
MAKE - SYSTEM/TOSHNIWAL/MICO/LUTRON
4
DM 159 165 Tape and dies complete sets
40-piece metric tap and die set in plastic case
types ( METRIC, BA, UNF, BSW & BSF)
MAKE – SAMRAT / GROZ / STANLEY / EASTMAN / NETCO
4
Page 10 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 161 166 Telescope gauge Set 6 Pc-Spring loaded, self centering plungers,Twist-knob for
measurement locking, in vinyl case,
Range (ft.) 5/16 in. - 6 in. ( 8 - 150 mm)
Type size(mm) range (mm)
A 115 8 - 12
B 115 12 - 19
C 115 19 - 32
D 137 32 - 54
E 137 54 - 90
F 137 90 - 150
16
DM 162 167 Temperature gauge with sensor
Measuring range:0°C...+120°C
Graduation:2°C
Measuring accuracy:+/-2%
Capillary length:1500mm
Head size:lenght: 34mm, diameter: 6mm
Capillary material/casing:cooper/PVC casing
8
DM 163 168 Thermostat Pellate type
High grade stainless steel and copper construction
100% tested and calibrated
Opening Temperature: 74°C ± 2°C.
8
DM 164 169 Thread pitch Gauge Metric, 23 blade, Range 0.25 to 6mm.
All leaves are clearly marked with the size
Features a locking device at both ends to securely lock the leaves
Made of high quality polished tool steel.
Make – Mitutoyo/Mahr/Groz/ Starrett/Sylvac/Capri/Fowler
8
DM 165 170 Timing Lighter
For use on 12 volt ignition system with on/off trigger switch
Briliant blue-white xenon tube for daylight use .
1,000,000 flash capability accurate to 8000 RPM .
with automotive reverse polarity and overload protection.
Sliding clamp-on inductive pick up for easy and safe hookup and 1 meter long
power lead inclosed in impact resistant housing
8
DM 166 A 171 Torque wrenches 5-35 Nm. made of high quality chrome plated polished steel head
with a double-sided, 1/2" square drive, push-through head.
having soft grip handle, fitted with a micrometer type mechanism adjustment knob,
delivering precise and accurate torquing.
Torque wrench individually tested and calibrated to the DIN-ISO 6789 standard of
+/- 4% and wrench supplied with a calibration certificate and durable storage case.
MAKE – GROZ / STANLEY / EASTMAN / NETCO/ TAPARIA
4
DM 166 B 172 A)Torque wrenches 12-68 Nm, made of high quality chrome plated polished steel
head with a double-sided, 1/2" square drive, push-through head.
having soft grip handle, fitted with a micrometer type mechanism adjustment knob,
delivering precise and accurate torquing.
Torque wrench individually tested and calibrated to the DIN-ISO 6789 standard of
+/- 4% and wrench supplied with a calibration certificate and durable storage case.
B)Torque wrenches 50-225 Nm made of high quality chrome plated polished steel
head with a double-sided, 1/2" square drive, push-through head.
having soft grip handle, fitted with a micrometer type mechanism adjustment knob,
delivering precise and accurate torquing.
Torque wrench individually tested and calibrated to the DIN-ISO 6789 standard of
+/- 4% and wrench supplied with a calibration certificate and durable storage case.
MAKE – GROZ / STANLEY / EASTMAN / NETCO/ TAPARIA
4
Page 11 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 166 C 173 Torque wrenches 50-225 Nm made of high quality chrome plated polished steel
head with a double-sided, 1/2" square drive, push-through head.
having soft grip handle, fitted with a micrometer type mechanism adjustment knob,
delivering precise and accurate torquing.
Torque wrench individually tested and calibrated to the DIN-ISO 6789 standard of
+/- 4% and wrench supplied with a calibration certificate and durable storage case.
4
DM 167 174 Trammel , 265 mm Size of Beam
To Scribe Circles of Diameter around 300mm
-Chrome Finished
-Arrangement is maintained by trans located on flat face of the beam.
8
DM 168 175 Tubocharger cut sectional view
DEMONSTRATION MODEL OF TURBOCHARGER
Model made out of full size original parts, suitably sectioned and to demonstrate the
working of turbocharger & mounted on a suitable base.
4
DM 169 176 Tyre pressure gauge with holding nipple
Size: 50 mm (2 inch)
Range: 0 to 120 psi
Case: M.S. drawn, protected with soft cover
Easy usage , Precise measurement with flexible hose
8
DM 170 177 Universal puller Set for removing pulleys & bearing, 3-Jaw reversible, double
ended, adjustable puller set of Set – 3”, 4”, and 6” Inch Removal Tool Kit,
Constructed from forged and hardened steel for strength and longevity; Steel drive
screw is cold-rolled and acme-threaded to give smooth performance even under high
stress, MAKE – GROZ / STANLEY
/ EASTMAN / NETCO/ TAPARIA
4
DM 171 178 CI Vee Blocks complete set with 2 clamp
made of cast iron (closed grain)
size- 75 x 38 x 38 mm
MAKE – Apex /SAMRAT / GROZ / STANLEY / EASTMAN
8
DM 172 179 VACUUM GAUGE 50MM DIA 0-760mm of Hg with flexible hose pipe &
connector.
8
DM 173 180 Valve Lifter Removal Tool
Secure Grip Handle
Slide Hammer Design
Overall Length: 13.5"
Heavy Duty Steel
Reach10.125 in.
Diameter0.640 in.
4
DM 174 181 Valve spring compressor universal Type made of chrome steel with all riveted joint
and slip resistant rubber handle,
jaw opening capacity 55 - 175 mm
throat clearance 250mm with restricted access adopter 25mm and 30mm
4
DM 175 182 Vernier caliper 0-300 mm with least count 0.02mm made out of Nickel chromium
steel, dual reading scale (metric and inch) with 14° bevelled vernier scale
Make – Mitutoyo/Mahr/Groz/ Starrett/Sylvac/Capri/Fowler
16
DM 176 183 Type Of JointSlip Joint
Handle Finish-Smooth finished
Shape Of Handles-Straight handle
Type Of Hand Tool-Vice Grip Pliers
Tool Finish-Polished.
Type Of Gripping Surface-serrated
Material-Alloy Steel
Length Of Hand Tool -255mm
jaw opening capacity 45mm
8
DM 177 184 Water pump assy.(centrifugalType) for LMV, Purpose -Demonstration, dismantling
& assembling
16
DM 178 185 Tool (standard wire gauge),Will measure wire 0-36 gauge (0.19-8.23mm),size- 3.5
inches in diameter, made of tool steel.
Make - Kristeel / Mitutoyo / Groz/Stanley
8
Page 12 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 179A 186 Work bench 250 X 120X 60 cm wooden top thickness 5 cm and channel leg made
out of mild steel
16
DM 179B 187 Bench vices sutable for 120mm jaw width with fixed base directly mounted on
workbench made out of closed grain cast iron, Dimensions (L x B x H): 347 mm x
138 mm x 129 mm . MAKE – Apex / GROZ / STANLEY / EASTMAN
64
DM 181 188 Arbor press hand operated 2 ton capacity
Sturdy, cast-iron construction
Rugged steel ram is driven by a machined pinion
Base drilled for mounting on a bench or Pedestal
Includes three piece bit set - 1 pointed, 1 round, and 1 square end bit, and a
removable steel anvil
The base is machined to hold the three bit set
Precision cut steel rams and pinions for accurate operation
Tables and slotted table-plates are flat and parallel to provide accurate support
Diameter of work (minimum)- 11-3/8 inches
Capacity over table (minimum)- 9 Inch
Size of ram face (minimum) 1-1/4 x 13 inches
Ram bore (minimum) 1/2 inch
Height (minimum) 16-1/4 inches
Base size (minimum) 6-3/8 x 17 inches
4
DM 183 189 Bench lever shears 250 mm Blade X 3 mm Capacity
Made of mild steel & blade made out of High carbon steel.
Ideal Machine for shearing sheet, steel, bars and rods.
Hardened and Tempered replaceable blades.
Long handles for plenty of shearing torque
with predrilled holes to bolt down to work bench.
4
DM 184 190 Diesel Engine Assembly with complete accessories- CRDI engine 4 stroke , 4
cylinder , for Dismantling and assembling with swivelling stand (FOR SPANNER
PRACTICE)
4
DM 192A 191 Hydraulic jack HI-LIFT type - 3 ton capacity 4
DM 192B 192 Hydraulic jack HI-LIFT type - 5 ton capacity 4
DM 193 193 Liquid penetrant Inspection kit (set)-Aerosol Type 4
DM 199 194 Trolley type portable air compressor single cylinder with 45 liters capacity Air Tank
Horse Power (HP)- 1 HP
Compressor Technology - Reciprocating
Cooling Method - Air Cooled
Size of Receiver (in L)- 45 litre tank
Compressor Mounting Configuration - Trolley Mounted
Maximum Flow Rate (in cfm) - 200-400 cfm,
along with accessories & with working pressure - 6.5 kg/sq cm
Air receiver hydraulic tested with automatic unloader, Tank Pressure Gauge &
safety valve
Nominal voltage 230 V/ 50 Hz with power cord length upto 2 m
4
Page 13 of 14
Item Code S.No. Description of Item As Per Tool List TOTAL
QUANTITY
DM 202 195 Working Condition of Diesel Engine-CRDI-4 stroke Cylinder : 6, Side valve
arrangement type
Type of engine- Vertical inline, water cooled
Bore x Stroke: 104 x 133 min
Displacement: 4-5 L
No. of Cylinders: 6 ( Inline FIP)
Power Rating: 180-210 hp @ 2200 rpm
Emission: Non Emission
Compression Ratio: 17.5:1
Aspiration: Turbocharged
Fuel Injection: Mechanical, Inline
No.of Valves/Cyl: 2 Valve
Engine fault scanner with
simulated provision of
trouble shooting
with complete accessories
4
DM 203 196 Cut section model of Four Cylinder Diesel engine (Inline Type, common rail diesel
injection system.
Fitted on sturdy movabe trolley.
Special colour coding for different System and Mechanism for study purpose.
4
DM 218 197 Leather Hand Gloves 14 inches
approximately 14 inches.
ISI MARKED - Yes
20
DM 220 198 Hand Rubber gloves tested for 5000V 20
DM 222 199 Specific gravity Range 1.100--1.300 AXB (Hydrometer Bulb type for Truck, car
battery Specific gravity Testing)
32
DM 224 200 Length of Apron 120 centimeter
Width of Apron 65 centimeter
GSM of Apron material (gm per sq mtrs) 2.2
Material of Apron Leather soft
20
DM 229 201 Steel wire Brush 50 mmx150mm 20
Page 14 of 14