57

Lights & ElectricalLights & Electrical

D.O.T. REFLECTIVE TAPE

Part # Description Mfg. #

11-552 Reflective Tape - 2" x 150' Roll (7” gray, 11” red) 96515TC

11-553 Reflective Tape - 2” x 150’ Roll (6” gray, 6” red) 16515TK

REFLEX D.O.T. REFLECTIVE TAPE

Part # Description Mfg. #

11-550 Reflex Tape - Red/White 2” x 150’

11-550-1 Reflex Tape - Red/White 2” x 10’ Section

11-555 Reflex Tape - White Only 2” x 12”

11-551 Reflex Tape - Red/White 1” x 150’

11-67636 Red/White (11" X 7", "Kiss Cut") 2" x 150' 67636

11-67635 Red/White (Strips) - 32 Pre-cut strips, 11" red and 7" white 2" x 18" 67635

Effective 12-1-93, all new trailers 10,000 GVWR, and over 80” wide must have reflective

tape. For side application, 2” or 2-1” red/white tape must cover a minimum of 50% of the trailer

length. For rear application, 2” red/white tape on the horizontal bar of the I.C.C. bumper and 2” x

12” long strips in the upper corners.

Part # Description Mfg. #

12-300 100’ Spool - 14 Gauge Single Wire - Green

12-301 100’ Spool - 14 Gauge Single Wire - Red

12-302 100’ Spool - 14 Gauge Single Wire - Black

12-303 100’ Spool - 14 Gauge Single Wire - White

12-304 100’ Spool - 14 Gauge Single Wire - Yellow

12-305 100’ Spool - 14 Gauge Single Wire - Brown

12-306 100’ Spool - 14 Gauge Single Wire - Blue

12-300-1 Per Foot - 14 Gauge Single Wire - Green

12-301-1 Per Foot - 14 Gauge Single Wire - Red

12-302-1 Per Foot - 14 Gauge Single Wire - Black

12-303-1 Per Foot - 14 Gauge Single Wire - White

12-304-1 Per Foot - 14 Gauge Single Wire - Yellow

12-305-1 Per Foot - 14 Gauge Single Wire - Brown

12-306-1 Per Foot - 14 Gauge Single Wire - Blue

12-307 1000’ Spool - 16 Gauge -White

12-307-G 1000’ Spool - 16 Gauge -Green

12-307-K 1000’ Spool - 16 Gauge -Red

12-307-Y 1000’ Spool - 16 Gauge -Yellow

12-309-BLK 1000’ Spool - 16 Gauge -Black

12-309-BLU 1000’ Spool - 16 Gauge -Blue

12-309-BRN 1000’ Spool - 16 Gauge -Brown

Temperature Rating of 80oC • GPT (General Purpose Thurmoplastic) Insulation

SINGLE GAUGE WIRE

Lig

hts

&

Ele

ctr

ical

58

Lights & ElectricalLights & Electrical

4, 6, AND 7 -WAY ROUND CABLE (14 GAUGE WIRE)

Part # Description Mfg. #

12-100 4-Way Cable (14 gauge inside plastic coating) 04924

12-200 6-Way Cable (14 gauge inside plastic coating) 04926

12-210 7-Way Cable (14 gauge inside plastic coating) 97705

12-210-DC 7-Way Cable (4/14 gauge - 3/12 guage)12-210-1 14/7 RD/WHT/BRN/YL/BLU/BLK

12-200-1-R 16 Gauge 4 Conduct. Cable 100’ Roll

Temperature Rating of 80oC • PVC Insulated Jacket

Single Conductor Copper Primary Wire

Single conductor copper stranded polyvinyl chloride (PVC) insulated primary wire – standard for

OEM. Rated for 12 volts, highly resistant to grease, oil, and acids. Meets S.A.E. specification J1128.

Color Key for Single Conductor Copper Primary Wire

Color is specified by applying the appropriate 2-digit suffix to the part number.

“01” - Red, “02” - White, “03” - Blue, “04” - Green, “05” - Black, “06” - Yellow, “07” - Brown

(For example: 500ft of Blue 18 Gauge wire would be ordered as "DC 11185 03")

Part # Description Mfg. #

12-11121 12 Gauge (100') - Specify Color With a 2-digit Suffix 11121

12-11125 12 Gauge (500') - Specify Color With a 2-digit Suffix 11125

12-11141 14 Gauge (100') - Specify Color With a 2-digit Suffix 11141

12-11145 14 Gauge (500') - Specify Color With a 2-digit Suffix 11145

12-11161 16 Gauge (100') - Specify Color With a 2-digit Suffix 11161

12-11165 16 Gauge (500') - Specify Color With a 2-digit Suffix 11165

12-11181 18 Gauge (100') - Specify Color With a 2-digit Suffix 11181

12-11185 18 Gauge (500') - Specify Color With a 2-digit Suffix 11185

FLAT 2-CONDUCTOR (14 GAUGE WIRE)

Part # Description Mfg. #

12-250 Flat 2-Conductor Cable (14 gauge) 03207

12-212 Brake Wire 250’ 12 Gauge

BONDED 3 AND 4-CONDUCTOR (14 GAUGE WIRE)

Part # Description Mfg. #

12-400 3 - Wire Bonded (GR,BR,YL) 16 gauge 02904

12-401 4 - Wire Bonded (GR,BR,YL,WT) 16 gauge 02916

12-02924 100’ GR,BR,YL,WT 18 Gauge

Temperature Rating of 80oC • PVC Insulation

Temperature Rating of 105oC • Heavy Duty PVC Insulated Jacket

SINGLE GAUGE WIRE

Lig

hts

&

Ele

ctr

ical

59

Lights & ElectricalLights & Electrical

PARALLEL WIRE & TRAILER CABLE

Part # Description Gauge Conductors Ft. Length Mfg. #

12-6122 Duplex Wire 12 2 By The Foot 6122

12-6122-1 Duplex Wire 12 2 100 6122-1

12-6122-5 Duplex Wire 12 2 500 6122-5

12-6122-2 Duplex Wire 12 2 2,000 6122-2

12-6142 Duplex Wire 14 2 By The Foot 6142

12-6142-1 Duplex Wire 14 2 100 6142-1

12-6142-5 Duplex Wire 14 2 500 6142-5

12-6142-2 Duplex Wire 14 2 2,000 6142-2

12-8164 General Purpose 16 4 2,000 8164

12-91261 Trailer Cable 12 6 100 91261

11-9146-1 Trailer Cable 14 6 100 91461

Constructed of 2,4 or 6 wires laid parallel and covered with a high quality polyvinyl chloride

jacket. Meets S.A.E. J1128 requirements.

4-WAY FLAT PLUG & SOCKET

Part # Description Mfg. #

11-700-2 4-Way Flat Plug & Socket - 12” 41860-12

0000-12-003 4 Pin Knockout w/36” 48065

11-700-5 4-Way Flat Plug & Socket - 48” 41810-30

11-700-6 5-Way Flat Plug & Socket - 48” 51760-48

4-WAY FLAT WIRE HARNESS

Part # Description Mfg. #

11-700-4 4-Way Flat Y-Harness with Plug (30’ long) 41810-30

11-700-9T 4-Way Flat Y-Harness with Plug (25’ long)

11-700-4-P Car Section 12” Long

11-700-8 Car Section 5’ Long

11-700-1 Trailer Section 12” Long

11-700-24 Trailer and Car Section 2’ Long

Note : These harnesses are non-shrouded

SPLIT TRAILER HARNESS KIT

Part # Description Mfg. #

11-700-9T-2P 25’, Split, Flat 4-Connector Harness B5425Y

TAIL LIGHT CONVERTERS

Part # Description Mfg. #

11-700-1-P Trailer Tail Light Converter Without Breaker CD17534-1

11-700-10-P Trailer Tail Light Converter With Breaker S03254

11-700-11 Tail Lamp 4-Way Flat Plug 60” S03232

7 CONTACT SIMULATOR

Part # Description Mfg. #

0000-12-006 Tekonsha 7 Way Trailer Emulator 6562

Lig

hts

&

Ele

ctr

ical

60

Lights & ElectricalLights & Electrical

TRUCK & TRAILER PLUGS

Part # Item # Description Mfg. #11-402 A Heavy Duty Plug no Cable Guard / die cast 4-pole unit 11-402

11-403 B Heavy Duty Plug with Cable Guard / die cast 4-pole unit 11-403

11-604 B Plug with out Cable Guard / Two 1/4" mounting holes on

6-way sockets, 2-7/8" on center. Mounts through 1-3/8" hole. 11-604

11-605 C Plug with Cable Guard / Two 1/4" mounting holes on 6-way

sockets, 2-7/8" on center. Mounts through 1-3/8" hole. 11-605

11-702 D Heavy Duty 7-Way Plugs /Zinc Die-Cast standard 7-Way Plug

with Cable Guard; 6-28 Volts; 40 Continuous Duty Amp. 11-702

11-710 E Standard 7-Way Plug with Cable Guard / 6-28 Volts; 40

Continuous Duty Amp. 11-710

12-800 F 7-Way Plastic Plug - RV Style (Trailer Side) 50-77-003

12-662 G 7-Way Metal Plug (Trailer Side) 15-730

12-630 I 6-Way Plug (trailer side) - Tekonsha 63B

12-615 I 4-Way Plug (trailer side) - Tekonsha 43-S

TRAILER-SIDE MOLDED WIRE HARNESS

Part # Description Mfg. #

12-641 6-Way Molded Plug w/ 4’ of Cable (trailer side) 50-61-104

12-643 6-Way Molded Plug w/ 6’ of Cable (trailer side) 50-61-106

12-644 7-Way Molded Plug w/ 6’ of Cable (trailer side) 50-61-001

12-644-1 7-Way Molded Plug w/ 4’ of Cable (trailer side) 50-67-907

12-644-2 7-Way Molded Plug w/ 8’ of Cable (trailer side) 50-27-008

12-644-3 7-Way Molded Plug w/11’ of Cable (trailer side) 200-48

12-640 6-Way Molded Plug w/ 8’ of Cable (trailer side) 50-61-108

12-644-3-P 7-Way Molded Plug w/18’ of Cable (trailer side)

Trailer Side

This cable comes with six 14-gauge wires or seven wires (four 14-gauge, two 12-gauge, &

one 10-gauge). Features encapsulated terminals and wires to form one weather resistant, non-corro-

sive assembly. Molded connector can be used with thermo-plastic or metal 6-way/7-way car end con-

nectors. Special length and combinations are available, ask your Nuera Transport sales representative.

TRUCK-SIDE MOLDED WIRE HARNESS

Part # Description Mfg. #

12-645 6-Way Molded Socket w/ 4’ of Cable (truck side) 50-68-004

12-646 7-Way Molded Socket w/ 4’ of Cable (truck side) 50-78-004

12-647 7-Way Molded Socket w/ 7’ of Cable (truck side) 50-78-007

Truck Side

This cable comes standard with six or seven 14 gauge wires. Features encapsulated termi-

nals and wires to form one weather resistant, non-corrosive assembly. Molded connector can be used

with thermo-plastic or metal 6-way or 7-way trailer end connectors. Special length and combinations

are available, ask your Nuera Transport sales representative.

Lig

hts

&

Ele

ctr

ical