-
empotrables / recessed
8059 960 XY 10W 1.900lm 190lm/W >90
8059 961 XY 19W 2.600lm 137lm/W >90
8059 962 XY 25W 3.500lm 140lm/W >90
8059 963 XY 30W 4.800lm 160lm/W >90
code module W lm efficiency CRI
Temperatura de color,remplazar “X” por: 2 - 2.700ºK 3 - 3.000ºK 7 - 3.500ºK 4 - 4.000ºK 5 - 5.000ºK
Apertura del haz de luz,remplazar “Y” por: 14 spot 24 medium 38 flood
ejemplo:8059 960 424 8
c a r d a n LED70 l e s s
no incluido_not includednincluido_includedi
8059 960_961_962_963 LED
INCL.
IP20
831
colores
120
CEILING CUT140x140
121
8059chassis
8331frameceilling cut140x140
8331
precerco-frame NO INCLUIDO NOT INCLUDED
pedido
8059 960 4 24 8
code 10W ºk beam angle color
140x140
30º
350º
8060ca rdanLED70 less
8061ca rdanLED70 less
en la imagen_in the picture
5007 8
n
nido de abejahoneycomb
31 8059 001 8
n
tapa de acerosteel cover
31
aluminio inyectado y acerodie cast aluminium and steel
materiales_materialsmateriales_materials
-
empotrables / recessedc a r d a n LED70 l e s s
8059 960_961_962_963
Insert the frame in the false ceiling.
Introducir el precerco en el falso techo.
Turn the frame depending on the false ceiling thickness. The side with the white la-bel UP for 12mm plaster. The side with the black label DOWN for 15mm plaster.
Orientar el precerco en función del grosor del falso techo. La etiqueta blanca hacia ARRIBA para falsos techos de 12mm de grososr. La etiqueta negra hacia ABAJO para falsos techos de 15mm de grosor.
Set the frame in the false ceiling and fix it with the su-pplied special screws.
Encajar el precerco en el falso techo y fijarlo a éste con tornillos especiales su-ministrados.
Apply plaster paste into the visible groove between the frame and the false ceiling.
Aplicar pasta de emplaste en el espacio entre el pre-cerco y el falso techo.
Sand and paint.Lijar y pintar.
-
empotrables / recessedc a r d a n LED70 l e s s
8059 960_961_962_963
Conect the cable to the dri-ver and insert the luminaire into the frame hole...
Conectar la fuente de ali-mentación al latiguillo e in-troducirla en el falso techo. Introducir la limunaria en el hueco del precerco...
... sliding bolts through the slots in the luminaire chas-sis.
... deslizando los tornillos del precerco por las ranuras de la caja de la luminaria.
After adjusting luminaire´s position, tighten the screws by means of a screwdriver.
Una vez ajustada la posición de la luminaria, apretar los tornillos con un destornilla-dor.
Point the luminaire.Orientar la luminaria.