Advanced Power ElectronicConverters
in Distributed Generation and
Renewable Sources
Antoni Dmowski, Prof DSc PhD EngPiotr Biczel, PhD EngWarsaw University of TechnologyInstitute of Electrical Power Generation75 Koszykowa St.00-662 WarsawPolandtel./fax +48 22 621 [email protected]
APS Energia Ltd.47 Marecka St.
05-220 ZielonkaPoland
tel./fax +48 22 762 0000www.apsenergia.pl
Problem – make different sources working together without power quality loss keeping efficiency as high as it is
possible keeping costs as low as it is
possible
Electronic power converters give possibility to make efficient link between different type of sources
The system of different sources connected to DC-link needs to be designed, built and examined
Power of sources should be at least few hundred kW per unit
Problem – efficient power conversion bidirectional AC/DC
converters for energy storage systems
AC/DC converters for variable frequency systems
DC/AC converters working with grid or stand-alone
all the rest you need
Strategy
We would like to find out: how sources work with power
converters how sources work together how to operate them to minimise costs
We are going to do this by building and practical examining the DC-linked system
Work plan
control strategy design remote control system design about 2 MW power converters
design (DC/DC, DC/AC, AC/DC)
converters construction system construction system operating examination approximately 5 years
Partners power electronic company
(APS Energia Ltd.) distribution company industry electrical engineering institute (i.e. Magdeburg
University of Technology, Aachen University of Technology)
budget should be about 1,5 Million € for power electronic converters and control systems project
Thak you!
