Download - Bhawesh Bhandari.docx
-
7/29/2019 Bhawesh Bhandari.docx
1/2
Bhawesh Bhandari,Department of Metallurgical Engineering,
Indian Institute of Technology(BHU), Varanasi.(+91) 7275800150
OBJECTIVE
To Acquire an INTERNSHIP/TRAINING DURING SUMMER (MAY- JULY) 2013, so as to make the best use of my
knowledge and experience, and thus put to test to my strong analytical skills in practical life to utmost use
and hence to enhance my knowledge in my area of interest.
EDUCATION
Indian Institute of Technology (BHU), Varanasi July 2010 Current
B. Tech. in Metallurgical Engineering(Current CGPA: 8.26 and Department rank 3 )
Semester I II III IV
SGPA 7.84 8.36 8.08 8.32
YGPA 8.10 8.20
Smt Nankibai wadhwani college,Yavatmal 2010
Maharashtra Board (Percentage:85.33%)
MVDEMS, Yavatmal 2008
Maharashtra Board (Percentage: 92.92%)
AREAS OF INTEREST
Mechanical Metallurgy(Mechanical Behaviour of Materials) Iron Making
PROJECTS UNDERTAKENProject 1 Regional Centre for Military Airworthiness (DRDO) May-July, 2012
Successfully completed a project on "strength-fracture toughness correlations in2D and 3D weaved SiC matrix, carbon
continuous fiber reinforced composites" under the supervision of Dr.N.Eswara Prasad, Scientist G Regional center of
Military Airworthiness (Materials), Hyderabad, India ( May-july,2012).
Project 2 IIT(BHU), Varanasi sept 2012-Till date
I have an ongoing project (started from September 2012) on Characterization ofCarbon nanotubes under the Head ofour metallurgical department, Professor G.V.S.Sastry .
MODEX in TECHNEX11, Made a sound navigator, a device that automatically detected the direction of incoming soundand moved in opposite direction.
PAPERS PRESENTED
Presented a poster on Strength-Fracture Toughness Correlations in 2D and 3D weaved SiC Matrix, Continuous CarbonFiber Reinforced Composites at the National Metallurgical Day-Annual Technical Meeting of The Indian Institute of
Metals, 2012.
ACADEMIC ACCOLADES
Presently Department Rank 7 at IIT (BHU), Varanasi with CGPA of 8.15. Secured All India Rank 4412 in Joint Entrance Examination 2010. Qualified AIEEE 2010 with All India Rank 8213. Listed in the Merit List of Class X at state level for outstanding performance. Received the Merit cum Means Scholarship from BHU for session 2010-2011. Received Thakur Das Nikobai Patel Scholarship from BHU for session 2011-12. Secured 1st rank in R3 (Reduce, Reuse & Recycle) in ANVESHAN 2012
-
7/29/2019 Bhawesh Bhandari.docx
2/2
TECHNICAL EXPERIENCE
Knowledge of Basic Metallographic techniques. Familiar with Hardness testing machines (Rockwell Tester, Vickers tester), Tensile Test machines, Compression Test
machines (INSTRON).
Knowledge of operating SEM, TEM, XRD Knowledge of Computer Applications in Metallurgy and Material Science
Undergone a lab course on various Metallography Techniques. Did a lab course on Mechanical Testing of Materials that involved testing of materials for Mechanical Properties (fatigue,
creep, hardness, tensile, torsion, shear, impact testing, etc.).
Also attended lab courses on Physical Metallurgy, Extractive Metallurgy, Electrometallurgy &Corrosion, FoundryMetallurgy and Mineral Beneficiation Practices.
EXTRA-CURRICULAR ACHIEVEMENTS
Member of student affiliate chapter of IIM (Indian institute of metals). Participated in STATE-LEVEL FENCING championship in Maharashtra. Designed two wired and manually controlled robots (striker and goalkeeper) for an event Robosoccer organized by our
Institute. Worked as a member of the local marketing team of TECHNEX11.
PERSONAL INFORMATION
Fathers name:RAVINDRA BHANDARI Mother: ANITA BHANDARI
Gender: MALE Date of Birth:09/08/1992
Nationality: INDIAN Languages: ENGLISH,HINDI
Address: C/O KAMAL DRESSES,MAIN ROAD,ARNI.DIST-YAVATMAL,MAHARASHTRA.PIN-445103