Download - Caesar Intro
SmartPlant Materials Product Update
CAESAR IIGENERAL OVERVIEWCAESAR II
Moment
ANALYSIS
REPORT ANALYSIS2MwP =- W D tPD 4t+-4M D2 t+-WeightPressure CONFIGURATION3
CONFIGURATION
4
CONFIGURATION5
CONFIGURATION6
7
8
9
10
PIPE MODELPipes are created by elements between two nodes.
The nodes are located when a new element is to be defined by a change of direction , change of properties etc.
Also if we want to know stresses, loads or displacements in these points.11ELBOWS OR BENDSThe elbows are placed in the axis cross12
CAESAR II will place two nodes automatically at 0 and 45 degs RIGIDSValves, flanges and specialties are rigids
Two ways of placement, manually or by catalog
13
RIGIDSSelecting catalog and automatic placement14
RIGIDSManual placement15
GAPS Different gaps16
17
CNODESCONECTION NODES. Cnodes are used to create restriction between different elemnets of the system. Examples:
Place supports from one pipe to another Unions and rstrictions between pipes and structures Connection to equipments with displacements Soil displacementsInclude anchors to show loads in conections. CNODES could be real or ficticius and can be at the same location
18
CNODESCNODES between pipes19
CnodesCnodes between pipes20
21
22
HANGERS23
EXPANSION JOINTSThey absorb displacements if there is no any other option available24
Axial force Axial force, two factors
INTERNAL PRESSURE F= Efective Area x Internal Pressure
RIGIDITY = Kexpjoint x Axial displacement
25
AXIAL FORCE26
AXIAL FORCE27
28
29
30
31
32
33
Expansion JointsManual Placement:34
EXPANSION JOINTS AUTOMATIC PLACEMENT BY CATALOG35
36
INVOKING BUILD CAESAR II CREATES DE ELEMENTS AUTOMATICALLY37
38