Cross discipline use of the Modular Formation Dynamics Tester (MDT) in the North SeaJohn Costaschuk, Dann Halverson, Andrew Robertson Res. Eng. Petrophysicist Geologist
Content
• Defining the Value of Information and the Functionality of the Modular Formation Dynamics Tester (MDT)
• Examples of value creation within BP’s North Sea operations:
• Summary and Conclusions
A. Operational Value B. Subsurface Value C. Project Value
InSitu Fluid Analysis
(IFA)
IFA & Asphaltene EoS
Vertical Interference TestAcquisition of live microbial samples
Defining the Value of Information
• Many E&P decisions are difficult to make, involving significant capital expenditure for uncertain gain.
• Value enhancement comes from allowing more robust decisions to be made, as a result of more reliable forecasting of the uncertain parameters and outcomes.
− Operational
− Subsurface
− Project
• Value of Information (VoI) compares the value associated with a decision, informed with and without extra information.
• The reliability of the additional data is crucial to understand.
The Functionality of the Modular Formation Dynamics Tester (MDT)
Rese
rvoir
Form
ati
on
Rese
rvoir
Form
ati
on
Conventional openhole pressure data is difficult to interpret in some areas of the resource:• Depletion signal
impacts interpretation• Low matrix perm in
parts of the reservoir
Adding IFA* data increases reliability of the fluid interpretation:• Viscosity• Optical Density• Fluid Density• Resistivity
* (IFA) InSitu Fluid Analyser
Sample Chambers
InSitu Fluid Analyser
High Pressure Pump
Focused Sampling Probe
Large Diameter Probe
Guard Fluid Analyser for focused sampling
Operational Value of MDT
B. Subsurface Value C. Project Value
Insitu Fluid Analysis
(IFA)
IFA & asphaltene EoS
Vertical Interference TestAcquisition of live microbial samples
A. Operational Value
Operational Value of IFA:
• Rapid determination of fluid contacts• Allows on the fly programme modification• Allows on the fly well test design modification• Resultant time cost saving on data acquisition.
Conversely allows you to optimise a programme when you only have a very limited time window.
Recent appraisal experience:
• The top ranked objective of a well was to confirm OIP by establishing FWL within the segment
• It was critical to ensure that a reliable free water sample was captured before weather terminated the operation.
Operational Value of MDTIFA confirmation that well objective met
• What is the critical time estimate for clean-up, before which quality samples can be taken? Is the rock of adequate mobility?
• Should the sample point be re-placed along the open-hole environment and clean-up restarted?
• Under poor weather conditions, when have the objectives been met, and thus can the run be terminated?
Operational Value of MDTIFA confirmation that well objective met
Shut-in
Shut-in
Resistivity
Density
Operational Value of MDTIFA confirmation that well objective met
Well Objective (#1)
• Confirm OIP by establishing FWL within segment.
IFA Observation
• FLOWING: Resistivity saturated up to 6900s, but after this resistivity drops in spikes: non-continuous water phase (droplet) becomes more continuous; relatively low viscosity bulk phase
• SHUT-IN: After the pumps are stopped at 10600s two immiscible fluids appear to segregate in the flowline, and a water density is measured at the AFA sensor at the bottom of the flowline
IFA Interpretation
• Mixed flow of two immiscible fluids when sampling
− Free water phase
− Oil phase or mud filtrate
8
Reliable Information
Pressure Data
Subsurface Value of MDTIFA integration with lab and depletion data
C. Project Value
Insitu Fluid Analysis
(IFA)
Acquisition of live microbial samples
A. Operational Value
Subsurface Value of IFA and asphaltene EoS:
− Alternate matches to the petroleum system model
− Connectivity and compartmentalisation
IFA Data
Reliable Information
B. Subsurface Value
IFA & asphaltene EoS
Vertical Interference Test
Subsurface Value of MDTVertical Interference Test Data
C. Project Value
Insitu Fluid Analysis
(IFA)
Acquisition of live microbial samples
A. Operational Value
Subsurface Value of Vertical Interference Test data:
− Uncalibrated petrophysical model
− DST test / no test decision required
− Kh and Kv/Kh uncertainty in missing core intervalB. Subsurface Value
IFA & asphaltene EoS
Vertical Interference Test
Project Value of MDTAcquisition of live microbial samples
Insitu Fluid Analysis
(IFA)
C. Project Value
Acquisition of live microbial samples
A. Operational Value
Project Value in acquisition of live microbial samples
• Reduce uncertainty on reservoir souring mechanism and evaluate injection water design options
Recent appraisal experience:• A specialised bottle preparation and sample
handling protocol has been developed between BP, OilPlus and Schlumberger
Pressurised water samples are not required for molecular work
Pressurised water samples are required for transferring and setting up the culture
• After three months incubation of the pressurised culture no significant hydrogen sulphide generation was observed (multiple bottles for each penetration).
B. Subsurface Value
IFA & asphaltene EoS
Vertical Interference Test
Summary and Conclusions
• Operational Value of InSitu Fluid Analyser (IFA):
− When and where to sample relative to well objectives
• Subsurface Value of IFA & asphaltene Equation of State:
− Alternate matches to the petroleum system model
− Connectivity and compartmentalisation
• Subsurface Value of Vertical Interference Test data:
− DST test / no test decision
− Kh and Kv/Kh in missing core interval
• Project Value of acquisition of live microbial samples