DYNAPAC CS1400 ROLLER PRESENTATION
CS142 - CS142N
2015-04-08
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers, towards the environment and the people around us.We make performance stand a test of time. This is what we call – Sustainable Productivity.
OVERVIEWCS1400N & CS1400
3
CS1400N is with ROPS, height 3400 mm (136 in.)
CS1400 is with safety cab, height 2990 mm (118 in.)
� Thin layers (about 25 mm / 1 inch) effectiveness (soil/asphalt)� Where vibration is a problem (bridges) or requirement
for high static linear load with big diameter drums� Tight quarter applications� Chipping of slippery surface� Drums can be ballasted with water to
reach maximum static linear load
APPLICATIONWhy use a static 3-drum roller?
4
reach maximum static linear load
PERFORMENCE - COMPACTION
CS1400 Competition
Equal static linear load over the complete rolling width
Vital data CS1400 and CS1400NStatic linear load: 60 kg/cm / 336 pliDrum diameter: 1500 mm/ 59 inchTotal coverage width: 2100 mm/ 83 inch
CS1400
PERFORMANCE - COMPACTIONLarge Drum Diameter/All Wheel Drive
Competition
CS1400
PERFORMENCE - STEERING CHARATERISTICSEqual static linear load over the complete rolling width
The rear drum always follows between the two front drums
Competition
Dynapac CS1400
1 2 3
PERFORMENCE - COMPACTION WIDTHCompaction Width
Dynapac CS1400
Hamm HW90 or other “traditional” 3 drum rollers
1 2 3 4 5 6
PERFORMENCE - COMPACTIONCapacity
Soil (Sand/Gravel/Subbase/Base)- up to 425 m3/h / 15,010 cubic feet-down to 0,3 meter / 0.98 feet compaction depth
Asphalt- up to 2200 m2/h / 23,672 sq feet- 25 to 50 mm / 0.98 to 1.97 inch layer thickness
PERFORMENCE - WATERSYSTEM
530 litres / 140 gal of water volumeEasy to fill standing on the ground
Windprotected sprinkler nozzles visible from the operators station Springloaded vulcolane scrapers are standard
Dual pumps and filters. One pump can support all drums with water
Easy to fill standing on the ground
PERFORMANCE – DIESEL ENGINE
� Fuel efficient stage IIIB and T4f ready Deutz TD3.6 L4 T4F diesel engine keeps emissions low
� 55 kW/ 74 hp give sufficient power for demanding work
11
VISIBILITYFull visibility of drum edges, drum surfaces and sp rinkler nozzles from the operators station
OPERATOR COMFORT
Dual seats and steering wheels makes it easier for the roller operator to come out on the sides for best visibility.
Optional air condition give the roller operator a very good climate in the cab also during the warmest time of the day.
Easy to enter the roller
OPERATOR COMFORT
Wide non-slip steps on both the left and right side of the machine makes it safe and easy to enter the operators station
SERVICEABILITY
Daily and frequent service points in the engine room are easy to reach
Daily maintenance points
engine room are easy to reach
Easy to reach the fuel filter and the battery at the front of the engine roomEasy to clean the radiator
SERVICEABILITYDaily maintenance points
Easy to refuel standing on the ground without climbing on the roller
Easy to fill water standing on the ground
SERVICEABILITYHydraulic pressure test points
Easy to reach the hydraulic pressure test points
SERVICEABILITYSpringloaded vulcolane scrapers for less frequent a djustments
SERVICEABILITYFailsafe pressurized brake release system
Brake release pump
SERVICEABILITY12 volts power outlet
Edge cutter available as special option
Hamm (discontinued)SakaiBomagIngramLocal
COMPETITORS
CS1400N/CS1400Operating mass 10800/11000 kg
(23,800 lbs/24,300 lbs)Max. operating mass 13000/13200 kg
(28,700 lbs/29,100 lbs)Max. static linear load 60 kg/cm
(330 pli)
TECHNICAL DATACS1400/N – Static 3-drum roller
23
Compaction width 2100 mm(83 in)
Drum diameter 1500 mm(59 in)
Engine Deutz TD 3.6 L4 IV/T4FStage IIIB/T4F
Power 55 kW(74 hp)
CS1400
Committed tosustainable productivity.sustainable productivity.
25