DYNAPAC CS1400 ROLLER PRESENTATION

CS142 - CS142N

2015-04-08

COMMITTED TO SUSTAINABLE PRODUCTIVITY

We stand by our responsibilities towards our customers, towards the environment and the people around us.We make performance stand a test of time. This is what we call – Sustainable Productivity.

OVERVIEWCS1400N & CS1400

3

CS1400N is with ROPS, height 3400 mm (136 in.)

CS1400 is with safety cab, height 2990 mm (118 in.)

� Thin layers (about 25 mm / 1 inch) effectiveness (soil/asphalt)� Where vibration is a problem (bridges) or requirement

for high static linear load with big diameter drums� Tight quarter applications� Chipping of slippery surface� Drums can be ballasted with water to

reach maximum static linear load

APPLICATIONWhy use a static 3-drum roller?

4

reach maximum static linear load

PERFORMENCE - COMPACTION

CS1400 Competition

Equal static linear load over the complete rolling width

Vital data CS1400 and CS1400NStatic linear load: 60 kg/cm / 336 pliDrum diameter: 1500 mm/ 59 inchTotal coverage width: 2100 mm/ 83 inch

CS1400

PERFORMANCE - COMPACTIONLarge Drum Diameter/All Wheel Drive

Competition

CS1400

PERFORMENCE - STEERING CHARATERISTICSEqual static linear load over the complete rolling width

The rear drum always follows between the two front drums

Competition

Dynapac CS1400

1 2 3

PERFORMENCE - COMPACTION WIDTHCompaction Width

Dynapac CS1400

Hamm HW90 or other “traditional” 3 drum rollers

1 2 3 4 5 6

PERFORMENCE - COMPACTIONCapacity

Soil (Sand/Gravel/Subbase/Base)- up to 425 m3/h / 15,010 cubic feet-down to 0,3 meter / 0.98 feet compaction depth

Asphalt- up to 2200 m2/h / 23,672 sq feet- 25 to 50 mm / 0.98 to 1.97 inch layer thickness

PERFORMENCE - WATERSYSTEM

530 litres / 140 gal of water volumeEasy to fill standing on the ground

Windprotected sprinkler nozzles visible from the operators station Springloaded vulcolane scrapers are standard

Dual pumps and filters. One pump can support all drums with water

Easy to fill standing on the ground

PERFORMANCE – DIESEL ENGINE

� Fuel efficient stage IIIB and T4f ready Deutz TD3.6 L4 T4F diesel engine keeps emissions low

� 55 kW/ 74 hp give sufficient power for demanding work

11

VISIBILITYFull visibility of drum edges, drum surfaces and sp rinkler nozzles from the operators station

OPERATOR COMFORT

Dual seats and steering wheels makes it easier for the roller operator to come out on the sides for best visibility.

Optional air condition give the roller operator a very good climate in the cab also during the warmest time of the day.

Easy to enter the roller

OPERATOR COMFORT

Wide non-slip steps on both the left and right side of the machine makes it safe and easy to enter the operators station

SERVICEABILITY

Daily and frequent service points in the engine room are easy to reach

Daily maintenance points

engine room are easy to reach

Easy to reach the fuel filter and the battery at the front of the engine roomEasy to clean the radiator

SERVICEABILITYDaily maintenance points

Easy to refuel standing on the ground without climbing on the roller

Easy to fill water standing on the ground

SERVICEABILITYHydraulic pressure test points

Easy to reach the hydraulic pressure test points

SERVICEABILITYSpringloaded vulcolane scrapers for less frequent a djustments

SERVICEABILITYFailsafe pressurized brake release system

Brake release pump

SERVICEABILITY12 volts power outlet

Edge cutter available as special option

Hamm (discontinued)SakaiBomagIngramLocal

COMPETITORS

CS1400N/CS1400Operating mass 10800/11000 kg

(23,800 lbs/24,300 lbs)Max. operating mass 13000/13200 kg

(28,700 lbs/29,100 lbs)Max. static linear load 60 kg/cm

(330 pli)

TECHNICAL DATACS1400/N – Static 3-drum roller

23

Compaction width 2100 mm(83 in)

Drum diameter 1500 mm(59 in)

Engine Deutz TD 3.6 L4 IV/T4FStage IIIB/T4F

Power 55 kW(74 hp)

CS1400

Committed tosustainable productivity.sustainable productivity.

25