Download - Getac E100
Transcript
Getac E100 GSM 3G setup
1) Remove the battery cover and battery as shown below.
2) Remove the two screws from the battery to remove.
3) Insert SIM card into SIM Slot and reverse the process to re-attach battery and cover.
4) Power up the Getac.
5) Launch ‘OneClick Internet from the desktop icon.
6) Click ‘Settings’ to allow you to select the correct service provider.
Select from pre-configured
service providers.
If your service provider isn’t on
the list then click here to
manually add the settings.
Click firmware, and then select
the service provider from the
list. Or select Automatic.
Click ‘Connect’ to establish the
connection.