G R E E N B U I L D I N G MATERIALS SUPPLIER
廣 州 綠 美 士 建 築 材 料 有 限 公 司
G U A N G Z H O U R Y M A X B U I L D I N G M A T E R I A L S C O . , L T D .
ADD.: 21, JinXiang Decorative Materials Market, NanAan Road, Guangzhou, 510160, China
TEL.: +86-20-81382983 FAX: +86-20-81811486
EMAIL: [email protected] WEB: www.lms888.com
RYMAX
TM
COMPANY INTRODUCTION
Since the company's establishment in 1991, RYMAX
TM
is
aiming to be the first grade enterprise and to manufacture the
first grade products. By persistently pursuing the principle of
"credibility, technology, quality and service", RYMAX
TM
products
were sold to the U.S., Europe, Canada, South Korea, Japan,
Singapore, Taiwan, Hong Kong, Macao, etc. RYMAX
TM
take quality
as the vitality of RYMAX
TM
and the user's satisfaction as the tenet; RYMAX
TM
products are welcomed in the
industry for years with high reputation.
RYMAX
TM
products include environment-friendly Wall Boards, Ceiling Boards, Maxto Boards (Fiber
Cement Boards), Sound Absorption Boards, Floor Boards and relative items in "RYMAX" trademark. They are
fireproof, waterproof, sound insulation, sound absorption, heat insulation, acids/alkalis
resistant, asbestos-free and toluene-free. They fit for
various environments with high temperature resistance and
especially high humid resistance. RYMAX
TM
boards for ceiling,
wall and floor are the effective succedaneums for wooden boards,
plasterboards and plastic boards. Not easy to break in
transportation, easy installation, non-distortion, good bending
elasticity, termite-free, worm-free, corrosion-free, fireproof,
waterproof and environment-friendly are all pronouns for RYMAX
TM
decoration materials.
RYMAX
TM
|green building materials supplier
01. MAXTO BOARD series
* Maxto Board (Fiber Cement Board)
* Laminated Maxto Board (Laminated Fiber Cement Board)
RYMAX
TM
MAXTO BOARD
RYMAX
TM
Maxto Board
RYMAX
TM Maxto Board (Fiber Cement Board) is a new kind partition board for high quality buildings. It is
compounded of patella cement, silver sand, porcelain granule, with fiberglass mash reinforced. With the
structure like cement wall, fiber cement board has excellent stability and durability. It is widely used for
interior and exterior partition in Europe, America and
Japan.
Installation of RYMAX
TM
Maxto Board (Fiber
Cement Board) is the same as other light partition
board (plaster board, etc.). With its innovative dual
sides design, the board can be fixed with ceramic tile,
stone board or glass on its rough side; while its
smooth side can be fixed with wallpaper or be
painted. It is ideal for high class residential building,
high-tech factory, shopping mall, restaurant and
hotel, etc.
Rough Face Smooth Face Sanding Face
RYMAX
TM
MAXTO BOARD
Performance:
Physical Property (8mm board):
Item Test Result Standard
Density 1.20g/cm3 GB/T 7019-1997
Flexural Strength In Dry Condition 11MPa GB/T 7019-1997
Flexural strength in water saturation condition 10MPa GB/T 7019-1997
Bulking Factor 0.2% JC688-2006
Formaldehyde Release <0.1mg/L (Qualified) GB 18580-2001
Activity Coefficient Qualified (Non Radioactive Substance) GB6566-2001
Combustibility Grade A1 GB/T 5464-1999
Moisture Absorption 0.12% GA 160-2004
Impermeability No water drop at the bottom GA 160-2004
Contract With Dry Rate 0.1% JC688-2006
Thermal Conductivity 0.117kca/mhC JC/T5641-2008
Installation:
Cutting and using RYMAX
TM
Maxto Board (Fiber Cement Board) is as same as using calcium silicate board.
Fix the board on the keel with self tapping screws, followed by putting joint mixture to seal the gap. If used
in moist environment, such as bath room, waterproofing should be reinforced.
Specifications:
Size Surface Weight Size Surface Weight
(mm) (kg) (mm) (kg)
1220x2440x6 Rough+Smooth 22 1220x2440x6 Sanding+Smooth 22
1220x2440x8 Rough+Smooth 28 1220x2440x8 Sanding+Smooth 28
1220x2440x9 Rough+Smooth 32 1220x2440x9 Sanding+Smooth 32
1220x2440x10 Rough+Smooth 36 1220x2440x10 Sanding+Smooth 36
1220x2440x12 Rough+Smooth 42 1220x2440x12 Sanding+Smooth 42
1220x2440x15 Rough+Smooth 53 1220x2440x15 Sanding+Smooth 53
1220x2440x18 Rough+Smooth 64 1220x2440x18 Sanding+Smooth 64
1220x2440x20 Rough+Smooth 71 1220x2440x20 Sanding+Smooth 71
Note: Special specification can be customized.
Features:
* Excellent Waterproof property: Besides its fireproof performance,
RYMAX
TM
Maxto Board (Fiber Cement Board) is also 100% waterproof. In
contrast, when in touch with water many other boards will be damaged and
decayed because of their interior structure destruction. Fiber cement board
even can be used as complete waterproofing material. In an experiment, a
water tank made of fiber cement board was filled with 200kg water, and lasted
for 120 days without leakage. It’s waterproof performance was also proved by
CN313777 test. When used as wall material in bathroom construction, it is
suggested that after waterproofing treatment, seal all openings and fill in
water 100 centimeters in depth. Leave the water for 30 days to confirm
waterproof performance before renovation to avoid any leakage in the future.
Waterproof Test
RYMAX
TM
MAXTO BOARD
* Grade A1 Fireproof Performance: RYMAX
TM
Maxto Board (Fiber
Cement Board) has been tested and granted Grade A1 by China
National Center for Quality Supervision and Testing of Fir Building
Materials.
* Amazing Heat Insulation, Energy Saving and Environment
Protection: Heat conductivity of RYMAX
TM
Maxto Board (Fiber Cement
Board) is only 0.117kcal/mhC. When used as exterior wall material or
roof heat insulation material, it can effectively reduce heat radiation,
and greatly increase efficiency of air conditioning system. It is ideal for
energy saving architecture.
* Rough face - best partner of Ceramic Tiles and Marbles: RYMAX
TM
Maxto Board (Fiber Cement Board) have two faces - Smooth and Rough
at the same time. When the smooth face is used, it can be plastered,
painted, pasted wall-paper/wall cloth directly; when rough face is used,
Ceramic Tiles, Mosaic Tiles, Stone Slates, Color Glasses, Porcelain Tiles, etc. can be pasted directly; they all
have very nice effects. Tested by ANSI, Ceramic Tiles stick force can reach 395psi, far above than the other
common Fireproof Veneers.
* Safe, Nontoxic, Healthy, Free of Radioactivity: In all steps of production, all raw materials are strictly
selected. Tested by National Building Materials Inspection Center, RYMAX
TM
Maxto Board (Fiber Cement
Board) are free of formaldehyde, asbestos.
* High Stability in Physical Performance, reliable for use: The components of RYMAX
TM
Maxto Board
(Fiber Cement Board) is similar to the concrete, their physical performances are also similar. Concrete
products have been used for hundreds years, there is no doubt to its stability and safety. There is no physical
change even after long term use, neither of damp and halogenations which are common in bad quality
boards; it’s feature of acid/alkali resistance can avoid the damage of insects due to the board rotten.
* Excellent Sound Insulation Performance: Tested by National Building Materials Inspection Center,
sound insulation value (RW) of RYMAX
TM
Maxto Board (Fiber Cement Board) can reach 39dB. For interior
partition wall, it can effectively insulates noises between rooms; and for exterior partition wall, it also can
effectively insulates the traffic noises.
Compressive Strength Test
RYMAX
TM
LAMINATED MAXTO BOARD
RYMAX
TM
Laminated Maxto Board
RYMAX
TM
Laminated Maxto Board (Fiber Cement Veneer Composited Board) is composited with various
kinds of Natural Wood, Fireproof Veneer, Melamine Veneer, Natural Marble, etc. on basic of RYMAX
TM
Maxto
Board (Fiber Cement Board). It can be directly used in interior decoration with considerable effects without
any additional process.
RYMAX
TM
Laminated Maxto Board (Fiber Cement Veneer Composited Board) carries all features of
RYMAX
TM
Maxto Board, it especially fit for interior or exterior
wall decoration.
Veneers can be composited to RYMAX
TM
Maxto Board:
* Natural wood
* Natural marble
* Fireproof Veneer Slate
* Melamine Veneer Slate
* and so on
Please contact us for more Veneer options.
RYMAX
TM
|green building materials supplier
02. FIBERGLASS MAGNESIUM BOARD series
* Fiberglass Magnesium Substrate Board
* Fiberglass Magnesium Veneer Composited Board
* Multi-layer Fiberglass Magnesium & MDF Composited Board
RYMAX
TM
FIBERGLASS MAGNESIUM SUBSTRATE BOARD
RYMAX
TM
Fiberglass Magnesium Substrate Board
RYMAX
TM
Fiberglass Magnesium Substrate Board is a kind of environment-friendly board material which
is made in one-time production modeling by using the modern new technologies after many years of
research and technical innovation. The material has a wide range of application. It can replace the Wooden
Board, Medium Density Fiber (MDF) Board, Gypsum/Plaster Board and Calcium Silicate Board. That is, it can
be applied in indoor partition wall and ceiling decoration in Office Buildings, Hotels and Malls, etc. It can also
be used in such industries as Furniture Manufacturing, Fireproofing Doors, Ventilation Ducts and other
industries where board materials are needed.
RYMAX
TM Fiberglass Magnesium Board has the following features:
* 100% free of asbestos, no smoke or poison gas release on fire, creating a green and healthy living
space;
* Excellent heat insulation performance lowers cold and hot energy consumption;
* Good fireproof property, with incombustibility reaching Grade A under GB8624-1997;
* Fast and convenient construction improves working efficiency;
* Superior sound insulation performance ensures peaceful and graceful living environment;
* The Substrate Board is high strength, good stability and good flexibility without any deformation;
RYMAX
TM
FIBERGLASS MAGNESIUM SUBSTRATE BOARD
* Water and moisture resistant, free from the impact of condensed water bead or moist air;
* Light-weight, ageing-resistant and long performance life;
* Protection against mould, bacterium, insects and termites;
Specifications:
Specification Color/Type
Weight
(mm) (kg/pcs)
1220x2440x3 White/A, Gray/B, Blue/C 13
1220x2440x6 White/A, Gray/B, Blue/C 20
1220x2440x8 White/A, Gray/B, Blue/C 25
1220x2440x9 White/A, Gray/B, Blue/C 29
1220x2440x10 White/A, Gray/B, Blue/C 32
1220x2440x12 White/A, Gray/B, Blue/C 40
1220x2440x15 White/A, Gray/B, Blue/C 45
1220x2440x16 White/A, Gray/B, Blue/C 49
1220x2440x18 White/A, Gray/B, Blue/C 55
1220x2440x20 White/A, Gray/B, Blue/C 60
Note: Special specifications can be customized.
Physical performance:Properties based on 10mm-thickness board material
Inspection Item Performance Standard Inspection Data Inspection Result
Apparent density (g/m3) 1.0<ρ≤1.2 1.1 Qualified
Moisture content (%) ≤8 5 Qualified
Rupture strength (MPa) ≥10 12 Qualified
Anti-shock strength (kj/m2) ≥2.0 2.6 Qualified
Screw holding strength (N/mm) ≥20 48 Qualified
Drying shrinkage (%) 0.3 0.2 Qualified
Water swelling rate (%) 0.6 0.4 Qualified
Moisture-resistance Without bead or moisture Without bead or moisture Qualified
Chloride ion content (%) ≤10 7 Qualified
Smooth surface, trim sides and corners, without such defects as crack, damage, divided layer, groove, ripple
Transport and Storage:
<1> Package
* For short-distance transport of fiberglass magnesium boards by truck, manual loading and unloading
is adopted, and dunnages or other special packages are not required.
* For long-distance or container transport, the pallet packing may be suggested.
RYMAX
TM
FIBERGLASS MAGNESIUM SUBSTRATE BOARD
<2> Handling
* Handling by only one person is prohibited. Sides and corners
must be protected.
* Two workers are required to lift the board, with two hands
stretching as much as possible to hold the two sides of the board
and to prevent over-bending of the board.
* The board should be carried vertically. When the thickness of
the board is less than 8mm, it is suggested to carry two boards in
one time.
<3> Storage
* Make sure that the bottom is plain, the height of each pile is
less than 1000mm and the storage height is less than 3000mm.
* Boards vertically placed should not be scattered, pile them in
an orderly way by specifications and type.
* The storage place shall be dry without any water leak or penetration to ensure the excellent
performance of the boards.
Installation Instructions:
<1> Processing
* RYMAX
TM
Fiberglass Magnesium Boards can be cut manually with common flady saws or handsaws.
They can also be cut and shaped by electric circular dentate saws or curvilinear saws. If board thickness is
less than 10mm, a cutting blade can be used.
* Drill-holes or Square-holes on the board can be made by Electri-drill or other hole makers with
distance not less than 10mm from the edge.
RYMAX
TM
FIBERGLASS MAGNESIUM SUBSTRATE BOARD
<2> Gap Filling
* Apply adequate filling materials into the gap about 3mm in width.
* Use a 50mm drawknife to bury punched-tapes into the gap. Seal the surface completely by filling
materials.
* Sand the joint surface gently after the joint filler is completely cured/dried. Apply a second layer filling
materials with a 200mm drawknife.
* Sand the joint surface gently again after the joint filler is completely cure/dried. The wall panel is now
ready for plaster or paint according to the specified surface requirements.
RYMAX
TM
FIBERGLASS MAGNESIUM VENEER COMPOSITED BOARD
RYMAX
TM
Fiberglass Magnesium Veneer Composited Board
RYMAX
TM
Fiberglass Magnesium Composited Veneer Board is made by compositing all kinds of veneers
on base of RYMAX
TM
Fiberglass Magnesium Substrate Board. It can be directly used for indoor decoration and
furniture manufacturing without further treatment to achieve the decoration effect.
Features:
* 100% free of asbestos, no smoke or poison gas release on fire, creating a green and healthy living
space;
* Excellent heat insulation performance lowers cold and hot energy consumption;
* Good fireproof property, with incombustibility reaching Grade A under GB8624-1997;
* Superior sound insulation performance ensures peaceful and graceful living environment;
* The Substrate Board is high strength, good stability and good flexibility without any deformation;
* Water and moisture resistant, free from the impact of condensed water bead or moist air;
* Light-weight, ageing-resistant and long performance life;
* Protection against mould, bacterium, insects and termites;
* Can be easily composited with various decoration veneers;
RYMAX
TM
FIBERGLASS MAGNESIUM VENEER COMPOSITED BOARD
* Elegant and natty decorative effect;
* Easy and convenient installation, improves efficiency and reduces cost;
Transport and Storage:
<1> Package
* For short-distance transport of fiberglass magnesium boards by truck, manual loading and unloading
is adopted, and dunnages or other special packages are not required.
* For long-distance or container transport, the pallet packing may be suggested.
<2> Handling
* Handling by only one person is prohibited. Sides and corners
must be protected.
* Two workers are required to lift the board, with two hands
stretching as much as possible to hold the two sides of the board
and to prevent over-bending of the board.
* The board should be carried vertically. When the thickness of
the board is less than 8mm, it is suggested to carry two boards in
one time.
<3> Storage
* Make sure that the bottom is plain, the height of each pile is
less than 1000mm and the storage height is less than 3000mm.
* Boards vertically placed should not be scattered, pile them in
an orderly way by specifications and type.
* The storage place shall be dry without any water leak or penetration to ensure the excellent
performance of the boards.
RYMAX
TM
MULTI-LAYER FIBERGLASS MAGNESIUM & MDF COMPOSITED BOARD
RYMAXTM
Multi-layer Fiberglass Magnesium &
MDF Composited Board
RYMAX
TM
Multi-layer Fiberglass Magnesium & MDF Composited Board is composited with MDF on base of
RYMAX
TM
Fiberglass Magnesium in multi-layers as demand, it can be used in interior wall partition.
RYMAX
TM
|green building materials supplier
03. ACOUSTIC BOARD series * Sound Absorption Board
* Sound Insulation Board
RYMAX
TM
SOUND ABSORPTION BOARD
RYMAX
TM
Sound Absorption Board
RYMAX
TM
Sound Absorption Board is made by high quality RYMAX
TM
Fiberglass Magnesium Board as the
baseboard and special technology of punching, etc. with strong surface coating, it is the building material
with very good sound-absorbing performance, and it can avoid the
problems of the other materials for lower Impact resistance and easy
broken after punching. It is the best sound-absorbing material for ceilings
and walls currently.
Features:
* Excellent sound-absorbing effect with punching rate up to
15%~20%.
* Color, pattern, style are changeable as your favourite.
* Waterproof, environment-friendly with excellent property.
* Easy installation, time & cost of installation can be saved.
RYMAX
TM
SOUND ABSORPTION BOARD
Usage:
RYMAX
TM
Sound Absorption Board is widely used in Theatre, Hall, Meeting-room, Museum, Hospital, Mall,
Office building, Music-room, Stadium, Auditorium, Dancing-room, Studio room, Generator room and so on,
for ceilings and walls.
Specification:
608x608x6~12mm
608x1220x6~12mm
608x2440x6~12mm
Note: Various specifications and patterns are available,
OEM/ODM are also welcomed. Diameter for punching holes is
6/8/10mm, distance from holes is 20x20mm, 30~50mm edge is
available, and Nonwoven Fabrics can be attached on the back.
RYMAX
TM
SOUND INSULATION BOARD
RYMAX
TM
Sound Insulation Board
RYMAX
TM
Sound Insulation Boards include: Paper Honeycomb Fiberglass Magnesium Sound Insulation
Board, Aluminum Honeycomb Fiberglass Magnesium Sound Insulation Board, Ceramic Honeycomb
Fiberglass Magnesium Sound Insulation Board and Styrofoam Core Sandwich Board.
RYMAX
TM
Sound Insulation Board series are mainly used for sound insulation, partition, decoration,
waterproofing, heat insulation in buildings, such as TV station, Cinema, Opera house, Music hall, Conference
centre, Gymnasium, Stereo room, Home, Mall, Hotel, Karaoke, Restaurant and Metro station, etc.
RYMAX
TM
SOUND INSULATION BOARD
RYMAX
TM
Honeycomb Sound Insulation Board (Paper / Aluminum / Ceramic Honeycomb)
Features:
* Excellent strength and weight ratio: High-strength, light weight,
Min. Materials use for Max. high compressive strength.
* Outstanding stability and does not deform easily.
* Good physical performance: Sound insulation and heat
insulation, anti-impact, excellent buffering performance.
* Low overall cost: Convenient and quick installation, removable
and reusable.
* Environment protection: The environment-friendly adhesive
glue is used and free of formaldehyde. It is 100% recyclable,
which saves forest resources.
Raw Material Introduction:
RYMAX
TM
Honeycomb Full-frequency Sound and Heat Insulation
Partition Wallboard uses the natural magnesite as the raw material.
It can be nailed, sawn and is fireproof and waterproof. It will not
release methanol or other harmful gases. It has already been proved that such material can be used
as fertilizer finally and is a new environment-friendly material recommended by China Ministry of
Construction for wide application.
Specification:
2440x1220x20mm; 2440x1220x27mm; 2440x610x50mm; 2440x610x95mm;
The maximum length is up to 3 meters.
Product material:
30%~40% of high-density polyethylene and 70%~80% natural wooden fiber combined under high
pressure.
RYMAX
TM
Styrofoam Core Sandwich Sound Insulation Board
It is composited by RYMAX
TM Fiberglass Magnesium
Board and extruded polystyrene board, it is mainly
used in cold storage, prefabricated house, steel
structure house, air-conditioning pipe, heat insulation
system etc.
環保建材專家
RYMAX
TM
|green building materials supplier
04. WALL BOARD series * Foam Cement Board
* Hollow Wall Board
* Wall Cladding Board
* Wood Pattern Cement Board
* Granite Texture Cement Board
* Rabbet Type RockWool Heat Insulation Laminboard
RYMAX
TM
FOAM CEMENT BOARD
RYMAX
TM
Foam Cement Board
Filled with well-mixed polyphenyl granule and special cement, RYMAX
TM
Solid Cement Wallboard is light
weight with good heat preservation, sound proof, heat insulation, fire proof and high weather ability. It is
also resistant to degradation, mildew, termites. Honeycomb structure formed by evenly distributed
polyphenyl granule gives the wallboard high impact resistance and good nail-holding grip.
RYMAX
TM
Foam Cement Wallboard is a new building
material designed for modern high-rise buildings,
steel-structured buildings and new ecological residential
buildings, featuring in anti-seismic, energy-conservative,
fireproof, damp-proof, soundproof, thin, anti-shock,
space-saving, mould-proof, not degradable and anti-insects.
RYMAX
TM
FOAM CEMENT BOARD
RYMAX
TM
Foam Cement Wallboard is sandwiched by two facing boards and filled with polystyrene
concrete in the core layer. The facing board is the Fiber Cement Board or Fiberglass Magnesium Board
developed with our own technology with outstanding advantages such as high-strength, fireproof,
damp-proof, anti-shock and pollution-free. The core layer made of polystyrene concrete heavily reduces the
weight and enables the panel to form multi-arched structures and have high flexural strength and
compressive resistance. The groove and tongue structure helps to build a strong and stable structure in one
piece. The industrialized production helps shorten the construction period and enhance the installation
efficiency, also the panel is nice decoration and easy for installing pipings. Since the wallboard is light and
thin, it really reduces the loads of the foundation, beams and columns and thus lowers the construction cost
and increase the usable area. No coat plastering is required for the smooth facing board and the construction
period can be greatly shortened. RYMAX Foam Cement Wallboard is ushering into a new period in the
modernized construction field.
Technical Performance:
Item Unit Technical Performance
125mm 100mm 75mm 50mm
Density kg/m3 ≤90 ≤80 ≤70 ≤50
Standard dry shrinkage mm/m ≤0.36 ≤0.29 ≤0.33 ≤0.49
Sound insulation value in air dB ≥53 ≥50 ≥47 ≥35
Impact strength No transfixion cracks times 10 10 10 5
Bend strength Board self-weight multiple
(Load applied) ≥7.8 ≥6.0 ≥6.0 ≥6.0
Hanging strength N 1000 1000 1000 1000
Max fire resistance H 5.0 4.3 3.0
Combustibility Grade Grade A
Heat conductivity w/m2k 1.7 1.7 1.7 1.7
Softening coefficient 0.84 0.9 0.89 1.0
Compressive strength 3.6 4.1 5.1
Water content % 5.1 5.9 6.0 3.6
Anti-halogenations No water bead, no damp
Antitoxic No poison gas emanate in high temperature
Water permeability Waterproof
Specifications:
Size
(mm)
Type Weight
(kg)
610x2440x50 Foam/Cement 50
610x2440x75 Foam/Cement 70
610x2440x100 Foam/Cement 85
610x2440x125 Foam/Cement 105
RYMAX
TM
FOAM CEMENT BOARD
Features:
1. Energy-conservative and Environment-friendly:
* Environment-friendly: The facing board of RYMAX
TM
Foam Cement Wallboard has been certified by
National Environment Protection Administration and the core layer of the panel mainly consists of fly
ash and polystyrene beads. It's nonpoisonous, no harms to domestic animals, non-radioactive and
meets the GB6566-2001 standard.
* Energy-conservative: The polystyrene concrete in RYMAX
TM
Foam Cement Wallboard core layer forms
a honeycomb structure which ensures good heat-insulating performance with low heat conduction
value, while most other panels are of hollow structure in which case the air flow accelerates the heat
conduction and thus have lower heat-insulating performance than RYMAX
TM
Foam Cement Wallboard.
With a density of 750kg/m3, RYMAX
TM
Foam Cement Wallboard
weights only 1/5 of other panels that are of the same
performance and helps save 80% transportation costs.
* Fire-proof:
RYMAX
TM
Foam Cement Wallboard has outstanding fire-proof
performance. The fire resistance limit excesses 5 hours under
1000oC with no emission of poisonous gases. The
non-flammability has reached A Grade standard as per
GB8624-1997 under the tests run by the National Center for
Testing of Fire Building Materials. It can be applied as fire-proof
walls in steel-structured or concrete-structured industrial and
civil constructions such as theatres, shops, factories and
warehouses, or fire-proof coating for steel-structure beams and
columns, or fire-proof encloses for gas duct sealing and elevator
shaft, etc.
* Anti-seismic:
As one piece, RYMAX
TM
Foam Cement Wallboard has a sandwich
compound structure. The cement fiber facing board also has high
strength and excellent tensile and shear resistance. The panel is
pre-fabricated and the in-between of panels are connected with
re-bars. The groove and toungue ends are connected with
high-strength polymeric anti-crack mortar and makes the
anti-shock performance 1.5 times stronger than that of common
brick walls. The entire strength will be highly enhanced after
combining with steel structure framework anchoring fixation. The installation is of high efficiency and
avoids the pouring and curing process of concrete beams and columns. It has outstanding anti-seismic
performance applying in building extra-high and wide-spanned walls and meets the National Standard
of “No Damages from Small Earthquakes, Repairable from Middle Earthquakes and No Collapse from
Large Earthquakes.”
Fire Resistance
Heat Insulation
RYMAX
TM
FOAM CEMENT BOARD
* Light-weight:
RYMAX
TM
Foam Cement Wallboard weights only 750kg/m3, in other words, 1m2 of RYMAX
TM
Foam
Cement Wallboard weighs only 1/5 that of solid brick walls and 1/2 of common light walls. 50mm,
75mm, 100mm thick RYMAX
TM
Foam Cement Wallboards can be freely used for separations on regular
construction floorings and no damages will be caused to the structure. (The required flooring loading
capacity should be more than 240kg/m2).
Internal Partition Wall
Wall Material Specification Weight (kg/m2) Total Weight
(mm) Self-weight Plastering (kg/m2)
Sand Lime Brick
240 438 80 518
180 324 80 404
120 216 80 296
90 162 80 242
Aerated Concrete Brick
180 144 80 224
120 96 80 176
90 72 80 152
Hollow Brick
240 240 80 320
180 180 80 260
120 120 80 200
90 90 80 170
Other Brick
240 288 80 368
180 216 80 296
120 144 80 224
90 108 80 188
RYMAX
TM
Foam Cement Wallboard
125 88 0 88
100 75 0 75
75 65 0 65
50 48 0 48
* Increase the usable area and decrease
the construction cost:
75mm thick RYMAX
TM
Foam Cement
Wallboard (plastering-exempted) is
85mm thinner than that of a 120mm
thick brick wall (160mm thick with coat
plastering), every 11.76 linear meter of
RYMAX
TM
Foam Cement Wallboard Wall
increase 1m2 usable area and the entire
area usage rate increases about 5%.
With the same usable area, take a 100m2
room for example, using RYMAX
TM
Foam
Cement Wallboard help increase about 5m2 usable area. So using RYMAX
TM
Foam Cement Wallboard as
separation walls can highly increase the use value and create invisible value (50mm RYMAX
TM
Foam
Cement Wallboard is most preferred in Shops).
RYMAX
TM
FOAM CEMENT BOARD
RYMAX
TM
Foam Cement Wallboard weighs about 750kg/m3 and 1/5 of regular brick walls, thus it
greatly reduces the dead weight of the building. By using RYMAX
TM
Foam Cement Wallboard, the usage
amount of materials for foundations, beams and columns can be greatly reduced and thus lowers the
total construction costs.
* Soundproof:
Both the high-density RYMAX
TM
Fiber Cement
Board/RYMAX
TM
Fiberglass Magnesium Board
and Honeycomb structured core layer have
excellent soundproof and sound absorbing
performances. 100mm and 125mm RYMAX
TM
Foam Cement Wallboard are rated 50dB
sound-insulation and can be widely applied
in places which demands good soundproof
performances such as KTV, Modern
Classroom with Configuration, Theatres, Concert halls and Conference rooms, etc.
* Waterproof and Damp-proof:
The reinforced fiber cement or Fiberglass Magnesium facing
board has outstanding waterproof performance; it doesn’t
suffer from moistering even in highly moisture environment
and moisture climate. The water tank made of RYMAX
TM
Panel
doesn’t leak or mould or crack. The external side has no
condensed water. RYMAX
TM
Foam Cement Wallboard can be
applied in moisture environment such as kitchens, bathrooms,
basements, Sound rooms and under-ground civil defenses.
* High Stability and Excellent Anti-aging Performance:
Three layers of RYMAX
TM
Foam Cement Wallboard are made of cement and have excellent stability. The
deformation rte is low while the softening coefficient is high. Also it has good acid and alkaline
resistance. It meets the requirements for construction life cycle since it does not turn halide, or mould,
or crack, or suffer from oxidation or weathering.
* Easily Stick and Nail:
RYMAX
TM
Foam Cement Wallboard can stick strongly with
building glue, cement mortar and internal/external wall
dopes. Tiles, marbles and wooden plaque can be directly
sticked. Unlike the hollow walls which can’t be nailed or
hanged, the hanging force of each single points of
RYMAX
TM
Foam Cement Wallboard is more than 1000N,
nails or expansion bolts can be directly drilled into the
panel for hanging heavy appliances such as ACs, TVs and
kitchen ventilators. Wiring and piping channels can be
cut directly in the panel.
Machine Room
KTV
Waterproof Test
Hanging Test
RYMAX
TM
FOAM CEMENT BOARD
* Short Construction Period, High Efficiency and No Pollution:
Pre-fabricated installation applied;
smooth facing board which
requires no plastering; no scaffold
needed for walls not higher than
3.2m; thin-webbed structure; low
transportation volume; several
times more efficient than building
regular walls.
* Simple Installation and Clean Construction Site:
Regular labors are able to learn to install panels
within a short period of simple training. The
installation tools are simple and the
length/width can be easily adjusted by cutting.
RYMAX
TM
Foam Cement Wallboards can be easily
stored and merely have no wastage. Since it
generates little construction garbage, using
RYMAX
TM
Foam Cement Wallboard helps create a
clean construction site.
Installation Diagram:
3 workers in 40min
Brick-wall: 12 workers in 450min
RYMAX
TM
FOAM CEMENT BOARD
Installation Instruction:
1. Board movement: To avoid over bended, single person carry is prohibit.
2. Line drawing: Draw up and down double lines upon board’s thickness on axis of wall. To keep the partition wall straight, base line should be vertical to the base line of girder / board bottom.
3. Mount fixer: On base of median, mount a angle iron fixer (l=200mm, 25x25x3) under girder / board bottom after each two wallboards.
4. Saw the wallboard: Saw the wallboard with electrical saw according to wall size.
5. Plastering: First plaster one cement paste on edge joint of two wallboards, then plaster polymer mortar on any edge joint of one wallboard.
6. Fix: Fix the wallboard with Ø6 or Ø8mm steel rod with building glue.
7. Flat & vertical correction: Flat & vertical correction with 2m or above long ruler.
8. Grouting, refill slurry: Grout and slick the wall gap, full fill the big gap up & down with cement.
9. Wire & switch installation: Line the position for wires & switches, cut groove with hand-saw. Grout & slick with polymer mortar after installation.
10. Paste crack tap: Paste crack tap with glue on all joint gaps after all walboards jointed.
11. Paint or Paste wallpaper: After wall installation, puttying and paint or paste wallpaper, no need plastering.
12. Paste ceramic tiles or wallboard: After wall installation, ceramic tiles or decorative wallslate can be pasted freely, no need plastering.
RYMAX
TM
HOLLOW WALL BOARD
RYMAX
TM
Hollow Wall Board
RYMAX
TM Hollow Wallboard is a product based on reinforced RYMAX
TM
Fiberglass Magnesium Substrate
board. It can be used as indoor partition wall material in hotels, office buildings. When compounded with
coated steel sheet, it can be used as wall material for hospitals, pharmaceutical factories, dustproof factories
and prefabricated houses, etc.
Specification and Weight of Hollow Wallboard:
Size
(mm)
Weight
(kg/pcs)
Size
(mm)
Weight
(kg/pcs)
Size
(mm)
Weight
(kg/pcs)
Size
(mm)
Weight
(kg/pcs)
610x2440x50 30 610x3000x50 43 1220x2440x50 60 1220x3000x50 85
610x2440x75 35 610x3000x75 48 1220x2440x75 69 1220x3000x75 95
610x2440x100 39 610x3000x100 53 1220x2440x100 78 1220x3000x100 105
610x2440x125 44 610x3000x125 58 1220x2440x125 87 1220x3000x125 115
610x2440x150 48 610x3000x150 63 1220x2440x150 96 1220x3000x150 125
610x2440x200 53 610x3000x200 68 1220x2440x200 105 1220x3000x200 135
RYMAX
TM
HOLLOW WALL BOARD
Physical Properties:
* Environmental test approved.
* Sound proof and heat proof test approved.
* Quality test approved.
* Non-combustibility test approved.
* Fireproof and anti-aging performance test approved.
* Fireproof and anti-aging performance test approved.
* The 50mm Hollow wallboard passed 50 minutes Non-combustibility test.
* The 50mm Hollow wallboard with insulation passed 150 minutes non-combustibility test.
RYMAX
TM
WALL CLADDING BOARD
RYMAX
TM
Wall Cladding Board
RYMAX
TM
Wall Cladding Board is made by compositing all kinds of veneers on base of RYMAX
TM
Fiberglass
Magnesium Substrate Board. It can be directly used for wall decoration without further treatment to achieve
the decoration effect.
Features:
* 100% free of asbestos, no smoke or poison gas release on fire, creating a green and healthy living
space;
* Excellent heat insulation performance lowers cold and hot energy consumption;
* Good fireproof property, with incombustibility reaching Grade A under GB8624-1997;
* Superior sound insulation performance ensures peaceful and graceful living environment;
* The Substrate Board is high strength, good stability and good flexibility without any deformation;
* Water and moisture resistant, free from the impact of condensed water bead or moist air;
* Light-weight, ageing-resistant and long performance life;
* Protection against mould, bacterium, insects and termites;
* Can be easily composited with various decoration veneers;
* Elegant and natty decorative effect;
* Easy and convenient installation, improves efficiency and reduces cost;
RYMAX
TM
WOOD PATTERN CEMENT BOARD
RYMAX
TM
Wood Pattern Cement Board
RYMAX
TM
Wood pattern cement boards, complete non-combustible material, incombustible highest A1
level, high temperature, high refractory limit, fire prevention function fully meet the safety of the building
use requirements, is the first professional fire products.
RYMAX
TM
Wood pattern cement board series is 100%
asbestos-free and high-class fireproof decorative board
autoclaved at high temperature and processed by
advanced spray coating techniques. It has characteristics
of lightweight, high strength, fire-proof, damp-proof,
mothproof and shows good performances in lightning
protection, heat insulation, sound absorption, deformation
resistance and not easy to break.
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Appearance and surface spraying:
There is typical concavo-convexed wood-grain on the appearance of RYMAX
TM
Wood pattern cement
board which makes it much natural and beautiful. Typical RYMAX
TM
Wood pattern cement board has various
wood-grain colors finishes.
In order to meet customer's special aesthetic requirements, we always supply uncolored board without
any spraying. Meanwhile, we propose to use environmental water-based coatings as finishes materials such
as water-based acrylic acid coating.
Applications:
RYMAX
TM
Wood pattern cement board is applicable for baseboards of high-end civil villas, multistory
residences, museums and other artistic garden constructions.
Features:
* Long span life, Over 60% materials of RYMAX
TM
Wood pattern cement board are same as the main
ingredient of granite, and more than 20% are same as marble;
* High-strength and fully meets national typhoon-resistance standard for civil residences;
* Light weight and being not afraid of the influence of weight for original structure;
* Low water-absorption and especially suitable for outdoor occasions of damp construct areas;
* Non-combustible material which meets the standard of GB8624-1997 and reaches A class by
testing;
* Excellent performance in impact-resistance and being applicable for the buildings located in dense
crowd areas and roadside;
* Good thermal insulation and can makes excellent effects of warm in winter and cool in summer;
* Completely inorganic board which is fire-proof, mildew-resistance and fungus proof to provide you
healthy guarantee;
* Good cost performance which is much inexpensive than other renowned brands of similar
products(real 100% asbestos-free fiber cement board).
Specifications:
Size: 3000x200mm, 2440x200mm
Thickness: 7.5, 9mm
Appearance:
Right Angle, aren horn, quads chamfering, 45o Angle, aren
45o Angle pour quads
Mechanical Properties:
Density: No less than1.3g/cm3 (state)In the EMS
Flexural strength: Long ltudina 11MPa Transverse 16MPa
Wet inflation: ≤0.25%
Screws output pull: >100N/mm2
Moisture content: ≤10%(state) In the EMS
Non-combustible performance: Grade A as per GB8624-1997
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Remarkable characteristics:
High-strength fire prevention, Reduce the construction load, Add floor usable floor area, Convenient
installation.
Composition of RYMAX
TM
Wood pattern cement exterior wallboard
Ingredients of RYMAX
TM
Wood pattern cement board:
RYMAX
TM
Wood pattern cement board is fiber cement board stacked at high temperature. The main
raw materials of RYMAX
TM
Wood pattern cement board are cement, fiber and other minerals. It is
100% free of sub-asbestos or other harmful substances.
Supporting structure of RYMAX
TM
Wood pattern cement board
Generally speaking, RYMAX
TM
Wood pattern cement board can be fixed by steel keel or wood keel.
RYMAX
TM
Wood pattern cement board can be fixed on wood keel with steel nails, or be fixed on steel
keel with self-tapping screws. The keel is fixed onto the wall with anchors. Cross-section width of the
keel should be less than 50mm, and central distance between keels should be less than 600mm.
Each board should cross three keels. If there are just two keels for supporting the board, the
distance of them should be less than 400mm.
Chart 1 is steel keel structure chart. Chart 2 is wood keel structure chart.
If the wall is very flat, the board can be fixed onto the wall directly, such as flat brick wall and the
walls which are smoothed out with mortars. See chart 3.
Chart 1 Steel Keel
1.Wood Pattern Cement Board;
2.Self-tapping Screw(3.5x25mm)
3.Bracket
4.Steel Keel(50x50x1.2mm)
5.Anchor
Chart 2 Wood Keel
1.Wood Pattern Cement Board;
2.Wood Bolt(4x40mm)
Stainless Steel Nail(2.5x35mm)
3.Anchor
4.Wood Keel(50x50mm)
Chart 3 Smooth Out with
Mortar Subcrust
1.Wood Pattern Cement Board;
2.Nylon Knock Stay Bolt(6x60mm)
3.Mortar Subcrust
4.Wall
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Accessories for exterior application of RYMAX
TM
Wood pattern cement board
The accessories is made of high quality galvanized steel, and its surface is generally white. See chart
4-7.
Chart4-Accessories 1
For board corner
Chart5-Accessories 2
For board coping
Chart6-Accessories 3
For board corner & ending
Chart7-Accessories 4
For board bottom
The accessory can be used in the corner, coping, bottom and ending of RYMAX
TM
Wood pattern
cement board. See chart 8-11.
Chart8-Outside corner Chart9-Coping & ending Chart10-Inside corner Chart11-Bottom
Thermal insulation and energy-saving performances of RYMAX
TM
Wood pattern cement
board
Thermal test parameters of RYMAX
TM
Wood pattern cement board stack system
Structure 1:
Install with steel keel, 25mm XPS board (Foam Extrusion Plank) thermal layer, more than 30mm air
layer, Thermoresistance R=1.2m2.K/W; Heat transfer coefficient K=0.73W/(m2.k)
Structure 2:
Hanging RYMAX
TM
Wood pattern cement board on the exterior wall directly, 50mm XPS board
thermal layer, Thermoresistance R=1.8m2.K/W; Heat transfer coefficient K=0.51W/(m2.k)
Structure 3:
Install with steel keel, 50mm XPS board (Foam Extrusion Plank) thermal layer, more than 30mm air
layer, Thermoresistance R=2.0m2.K/W; Heat transfer coefficient K=0.47W/(m2.K)
Note: Above data is the actual test data.
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Exterior thermal insulation structure:
If you need thermal insulation for exterior walls of building, you can
fill with some thermal insulation materials in the cavity of RYMAX
TM
Wood pattern cement board rear, such as foam extrusion plank, PU
foam and rock wool (bulk density ≥80kg/m3), the thermal layer is
generally close to the outside of the exterior wall cavity thickness
between board rear and thermal insulation materials is generally less
than 30mm.
Thermal parameters of exterior stack system:
Exterior wall system
Thermal layer
thickness
Heat transfer coefficient
K
mm W/(m2.K)
RYMAX
TM
Wood pattern cement board exterior stack system
Sidings (Use foam extrusion plank)
Base wall is reinforced concrete wall or concrete hollow block
wall
20 1.18
25 0.73
35 0.78
50 0.47
70 0.44
RYMAX
TM
Wood pattern cement board exterior stack system
Sidings (Use foam extrusion plank)
Base wall is non-clay porous brick wall
15 1.03
20 0.89
30 0.71
40 0.59
60 0.44
RYMAX
TM
Wood pattern cement board exterior stack system
Sidings (Use flexible PU foam)
Base wall is concrete hollow block wall
30 1.09
40 0.88
45 0.78
65 0.58
70 0.54
RYMAX
TM
Wood pattern cement board exterior stack system
Sidings (Use non-flexible PU foam)
Base wall is non-clay porous brick wall
20 1.03
30 1.84
40 1.79
50 1.61
60 1.54
Chart12-1.Wood Pattern Cement Board;
2.Tapping Screw; 3.Keel/Cavity;
4.Thermal Insulation Materials; 5.Wall
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Structure of RYMAX
TM
Wood pattern cement board installation with steel keel:
Façade arrangement decoration of RYMAX
TM
Wood pattern cement board:
The board can be fixed on the keel with fasteners directly. In
order to make the connection of seams easier, the keel width
should not be less than 50mm. The section size of the keel in
this picture is 50x50x1.2mm, the vertical seams between
boards should be staggered mutually. See chart 13.
The vertical overlap
size between boards
should be over 30mm
but less than 50mm.
The boards can be
spliced directly, see
chart 14.
Or staying about
5mm thickness seam
between boards, then
fill in it with
polyurethane sealant.
Vertical structure of RYMAX
TM
Wood pattern cement board:
In order to tilt the first RYMAX
TM
Wood pattern
cement board, it must be lifted up by a piece of
30mm width lath with same thickness as the
RYMAX
TM
Wood pattern cement board.
The outside part of RYMAX
TM
Wood pattern cement
board (such as the bottom) can be covered by
punching fence (such as stainless steel mesh) to
avoid little animals going in. See chart 15.
The maximum vertical distance between different
racks for fixing steel keels is 1200mm, there are at
least three racks for fixing each keel. If there are
just two racks for fixing the keels, their distance
must be less than 800mm.
The distance between keels should less than
600mm, see chart 13. The keel can be e3xtended
by two keels connected with rivets.
Chart14-Board Fixing Node
1.Keel; 2.Fastener; 3.Wood Pattern Cement Board;
Chart13-Board Façade Arrangement
1.Wood Pattern Cement Board; 2.Keel;
3.Wall; 4.Thermal Insulation Materials
Chart15-
Board Landwise Section
1.Wall Pattern Cement Board;
2.Wall;
3.Rack;
4.Keel;
5.Anchor;
6.Lath (T=30mm);
7.Punching fence;
8.Keel connection;
9.Thermal insulation layer.
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Façade arrangement of RYMAX
TM
Wood pattern cement board:
Chart16-Corner Accessories
1.Wood Pattern Cement Board
2.Accessories; 3.Accessories
Chart17-Aluminum Alloy Acc.
1.Wood Pattern Cement Board
2.Aluminum Alloy Corner Keel
Chart18-Slanding Cutting
1.Wood Pattern Cement Board
Chart19-Board Corner Décor
1.Wood Pattern Cement Board
2.Decorative Board Corner
Vertical structure of RYMAX
TM
Wood pattern cement board:
Chart20-Corner Accessories Décor
1.Wood Pattern Cement Board;
2.Accessories; 3.Corner Waterproof Piece
(0.6mm Galvanized Steel Strip)
Chart21-Aluminum Alloy Accessories Decor
1.Wood Pattern Cement Board;
2.Aluminium Alloy Corner Accessories
Chart22-Board Slanding Cutting
1.Wood Pattern Cement Board
Outside corner structure:
RYMAX
TM
Wood pattern cement board can be processed on-the-spot, the corners can be butted joint
without any accessories by slanting cutting, see chart 23.
The butt joint effect is typical and the surface wood-grain can keep coherence. Because the same
material so that the building appearance always can keep unanimity.
The board also can be decorated with easy cut board pieces, so that can supply convince for
construction, see chart 24. Or can decorate it with some corner decorative pieces.
Chart23-Board Slanting Cutting
1.Wood Pattern Cement Board
Chart24-Board Corner Décor
1.Wood Pattern Cement Board;
2.Decoration Piece
RYMAX
TM
WOOD PATTERN CEMENT BOARD
Inside corner structure:
Inside corner angle can be docked directly to the plate, showed
as chart 25, and also can be docked with decorative accessories
or sheet docking keel.
Butt joint chart of outside corners:
Because the exterior stack of RYMAX
TM
Wood pattern cement
board is slant, so the joint position of the corner is surface tilt.
Below chart shows the joint method of the boards at outside
corner, see chart 26. Construction of RYMAX
TM
Wood pattern
cement board is done from bottom to top, so the seams of the corner also must be bottom-up
installation.
Chart25-Inside Corner Butt Joint
1.Wood Pattern Cement Board
RYMAX
TM
GRANITE TEXTURE CEMENT BOARD
RYMAX
TM
Granite Texture Cement Board
RYMAX
TM
Granite Texture Cement Board is a kind of fiber cement decoration board, but with special
granite like textures on its two faces, one face with exquisite grains and the other face with strong 3D grains,
it’s as good effect as Granite and it can achieve the effects of which Marble or Cast Finish Concrete offers. So
it's call Granite Pattern Cement Board.
RYMAX
TM
Granite Texture Cement Board Features:
* Light Weight: When RYMAX
TM
Granite Texture Cement Board use for partition wall, its weight is
about 1/15 of brick walls and 1/10 of aerated concrete brick walls in same thickness. It's good for
the structure impact resistance and it can reduce construction costs of the building base and body.
* Heat Protection & Insulation: With structure of Portland Cement and Plant Fabric, Heat transfer
coefficient of RYMAX
TM
Granite Texture Cement Board is 0.176W/(M.K), similar to the Gypsum
Board, and better than Sand Lime Brick walls (1.1W/(M.K)).
* Excellent Fireproof Performance: RYMAX
TM
Granite Texture Cement Board is non-combustible, it
can absorb large number of heats and delay the increase of environment temperature while on fire.
It’s fire endurance can be 8 hours.
RYMAX
TM
GRANITE TEXTURE CEMENT BOARD
* Nice Decoration Effects: With its plate surface, seamless surface can be got after joint treatment
between boards. It can be decorate with the surfaces. Because the board is the same inside and
outside, many kinds of joint treatment can be used. It has different pattern in its two faces,
construction coloring can be done directly on its fine pattern face and ceramic tiles can be pasted
directly on its rough pattern face.
* Easy Construction: RYMAX
TM
Granite Texture Cement Board can be cut, perforated, burnished with
common wood work tools, it’s very easy for construction. Traditional wet & dry construction
methods can be used to improve the construction efficiency.
* Comfortable Living Function: With the unique cement fine holes structure in RYMAX
TM
Granite
Texture Cement Board, it can adjust the room humidity in a specific range and make the living
more comfortable. The unique decorated cement effects on board surface give people a fresh
feeling.
* Green Material: Raw materials of RYMAX
TM
Granite Texture Cement Board are natural Portland
cement and Plant Fabric and without any toxic emission materials in production. 100% free of
asbestos.
* High Strength: Bending strength of RYMAX
TM
Granite Texture Cement Board is 322kgf/cm2 (vertical)
and 216kgf/cm2 (horizontal). Bend broken load is 87kgf (vertical) and 58kgf (horizontal).
* Space Saving: Wall thickness can be decreased greatly in usage of RYMAX
TM
Granite Texture
Cement Board for wall body, and performance of soundproof and fireproof can be ensured.
Furthermore, it’s easy construction and with unique pattern.
Specifications:
1200x2400x6, 8mm
Usage Range:
RYMAX
TM
Granite Texture Cement Board can be widely used, it can be the face material and also the
base material. Unique effect can be got when use as face material, and safety can be got when use
as base material. It’s widely used in Interior Wall, Exterior Wall, Ceiling, and also Floor.
RYMAX
TM
Granite Texture Cement Board Technical Data:
Item Unit Data
Density kg/m3 1600
Fire resistance Grade Grade A
Elastic coefficient N/mm2 3000
Impact resistance No crack, strip, penetrate, craze
Water Permeability No water drop backside
Length change after water absorption kgf/cm2 <3%
Bending strength
Vertical kgf/cm2 322
Horizontal kgf/cm2 216
Bend broken load
Vertical kgf 87
Horizontal kgf 58
Heat transfer coefficient(K) W/mK 0.176
Size mm 1220x2440x6, 8
RYMAX
TM
GRANITE TEXTURE CEMENT BOARD
Comparison with the other boards:
Item RYMAX
TM
Granite Texture Cement Board Other Fiber Cement Boards
Specifications 3'x6' / 4'x4'/ 4'x6' /4'x8' 4'x6' / 4'x8'
Volume weight 1.6 (high waterproof & damp-proof) 1.3 (low water proof & damp proof)
Surface Nice effects on rough/fine pattern surfaces,
suitable for face materials No texture, unsuitable for face materials
Cement content High (high strength, no easy broken) Low (low strength, easy broken)
Construction Pollution Toxic free, no dust & no cutting pollution High dust & high cutting pollution
RYMAX
TM
RABBET TYPE ROCKWOOL HEAT INSULATION LAMINBOARD
RYMAXTM
Rabbet Type RockWool
Heat Insulation Laminboard
RYMAX
TM
Rabbet type Rock Wool Thermal Insulation Laminboard surface is high grade polyester baking
vanish colors steel sheet. The galvanized sheet and stainless steel can also be used. So, it has good
corrosion-resistant property. The core material of product is Grade A fire-retardant material (except paper
honey comb). There is neither melting during burning nor high temperature decomposing dripping items. As
a high grade fireproof building plate, it is characterized by high intensity, impact resistance, good shock
resistance and easy construction and installation.
Specifications:
Effective width: 300~1180mm, standard size: 980mm, 1180mm
Length: It’s made upon the need of users and project requirement (Usual length ≤6000mm)
Applicable core materials:
Fiberglass Magnesium Board, Rock Wool, Aluminum honeycomb, plastic extruding and polyurethane,
etc.
RYMAX
TM
RABBET TYPE ROCKWOOL HEAT INSULATION LAMINBOARD
Mounting structure:
Male-female joining, cross aluminum joining.
Application range:
Used for electronic (industrial building), medicine (purifying room),
chemical (fireproof workshop), etc.
RYMAX
TM
|green building materials supplier
05. FLOOR BOARD series
* Fiberglass Magnesium Veneer Floor Tiles
* Antistatic Floor Board
* Outdoor Floor Board
RYMAX
TM
FIBERGLASS MAGNESIUM VENEER FLOOR TILES
RYMAXTM
Fiberglass Magnesium
Veneer Floor Tiles
RYMAX
TM
Fiberglass Magnesium Composited Veneer Board is composited with wood veneers and high
wear-resisting coating on base of RYMAX
TM
Fiberglass Magnesium Substrate Board. It can be directly used for
floor decoration without further treatment to achieve the decoration effect.
Features:
* 100% free of asbestos, no smoke or poison gas release on fire, creating a green and healthy living
space;
* Excellent heat insulation performance lowers cold and hot energy consumption;
* Good fireproof property, with incombustibility reaching Grade A under GB8624-1997 for the
substrate board;
* Superior sound insulation performance ensures peaceful and graceful living environment;
* The Substrate Board is high strength, good stability and good flexibility without any deformation;
* Water and moisture resistant, free from the impact of condensed water bead or moist air;
* Light-weight, ageing-resistant and long performance life;
* Protection against mould, bacterium, insects and termites;
* Can be easily composited with various decoration veneers;
RYMAX
TM
FIBERGLASS MAGNESIUM VENEER FLOOR TILES
* Elegant and natty decorative effect;
* Easy and convenient installation, improves efficiency and reduces cost;
RYMAX
TM
ANTISTATIC FLOOR BOARD
RYMAX
TM
Antistatic Floor Board
RYMAX
TM
Steel Antistatic Floor Board are whole steel components, its surface is high wear-resistant
antistatic PVC or HPL veneer on deep tensile steel plate, its bottom is hard SPCC steel plate. Shapes are
stamped for up & down steel plates, and center vacant shell is filled with foam cements. After cement curing,
it forms the steady bearing structure.
Features:
* Heavy bearing, high anti-shock;
* Changeable, easy to install, nice effects;
* Waterproof, fireproof, antistatic;
* No crack and peeling for the all steel floor board;
Specifications:
600x600x30, 35mm, installation height is adjustable.
Height of finished base support: 100~350mm, unstandard height up to 880mm can be customized.
RYMAX
TM
OUTDOOR FLOOR TILES
RYMAX
TM
Outdoor Floor Tiles
RYMAX
TM
Outdoor Floor Tile is a kind of environment friendly material, it keeps the color and texture of
wood but at the same time it carries the features the other traditional materials don’t have, such as:
waterproof, fire resistance, zero pollution, recyclable, etc. It can be used without painting, and it can nail,
twist drill, plane. It is flexible, no deformation, no crack, no stain &
mildew stain; contents of formaldehyde is far below to the international
standard.
With special keel and the other accessories, it’s easy installation,
free maintenance. It’s a kind of true environment friendly, natural and
healthy new decorative material, it can be widely used in home, garden,
office, building, etc. RYMAX
TM
Outdoor Floor Tile is different from the
common wood material, its color and texture inside and on surface are
the same. With its bright surface, it’s no need to paint when in use, and
it's easy installation & maintenance with elegant appearance and style.
RYMAX
TM
OUTDOOR FLOOR TILES
Features:
* Stability: No deformation to the base material, without defects of common wood materials such as:
shrink, deformation, crack, and so on;
* Functionality: Anti moth, moisture-proof; cleanable, no surface shed;
* Environment friendly: Passed environment friendly test, with decoration pollution;
* Easy to use: With all installation properties of solid wood, it can nail, drill, plane and paint;
* Nice decorative effects: Strong wood texture, it can be made in many kinds of colors and patterns
without color shading;
* Economic: Easy installation without plane and mill of common woods, leftover pieces can be recycle,
it can save about 30% of costs;
Construction Method:
1. Clean the floor and ensure the floor plain, dry and without oil
stain;
2. Setup the layout program, draw lines and set positioner,
then mount the keel. Distance between keels should be less than
400mm; leveling while place keels and tolerance should be less
than 1mm. Fix the keels with M6 expansion bolts, distance between
bolts should be more than 300mm and fill waterproof construction
glue on the contact floor to keep keels stable.
3. Place floor tiles: Fix the first floor tile according to drawing lines, mount it to keel with flat self-tapping
screw on female slot of the floor tile; the screw should be plain with floor tile; the second floor tile should be
inserted into the female slot of first floor tile and left 1mm dilatation joint.
4. Ending treatment: When floor tiles are placed to the last piece, fix it from surface with 4x40mm flat
self-tapping screws; ending with 30x12 wooden bar horizontal placed and fix it on the base keel with
4x40mm flat self-tapping screws.
5. Clean the floor when everything is finished.
Caution to use RYMAXTM Outdoor Floor Tiles:
It’s easy to clean the floor tiles, just wiping with a wet dishcloth or mop. When in use, in order to protect
floor surface, please avoid impact from heavy, sharp & hard material, and prevent attrition of heavy & sharp
metal, glass & ceramic piece. When partial replacement, it's recommended to use the same model to keep
fool tiles in same color.
Caution to install RYMAXTM Outdoor Floor Tiles:
RYMAX
TM
Outdoor Floor Tile carries the process properties of wood, it’s easy to saw, cut, drill, nail with
common tools. But please pay attention to the followings:
1. Be strictly meet the span length requirement from factory, because RYMAX
TM
Outdoor Floor Tiles have
bigger creep properties than wood, safe risk will be caused if too long span is used.
2. Considering dewatering, clean and slight heat-expand & cold-contract, proper gap should be left
between tiles while installation.
RYMAX
TM
|green building materials supplier
06. CALCIUM SILICATE BOARD series * Calcium Silicate Veneer Board
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
RYMAX
TM
Calcium Silicate Veneer Board
RYMAX
TM
Calcium Silicate Veneer Board is a kind of new green building materials which is to meet the
demand of wall decorating revolution for environment friendly, energy saving, radiation reducing,
installation simplifying. Fiber reinforced calcium silicate board is used as basic materials; processed by
special treatment techniques; with texture of
marble, wood, aluminum plastic board or design
of intelligent personality.
100% free of asbestos, formaldehyde,
benzene and other poisonous substances and
without radiation; fire and water proof, light and
hard, can be used and replaced natural marble,
MDF, wooden plate, ceramic facing tile and
aluminum plastic plate etc. on the exterior wall
decorating in tunnel, subway, airport, marketplace,
hospital, office, kitchen, bathroom, lab, etc.
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
Features:
Colorful designs Environment friendly Energy saving Light and hard
Fire protection class: A Easy for cleaning Simple installation Economical and durable
Product structure:
* Surface protective layers
Formed of waterproof layer, color pattern layer and
protective layer, processed by world leading special
treatment techniques; UV protective layer, with
characteristics of durability, mildew proof, germ
anti, easy clean, hardness reach 5~6H.
* Basic material layer
Formed of calcium silicate board, fiber reinforced
cement board or glass fiber magnesium oxide
board
Specifications:
1220x2440x3~20mm
Product Series:
Marble texture series
Applications:
Exterior / interior wall, house,
tunnel, airport, subway, hospital,
laboratory, market place,
meeting room, theater, office,
lobby, etc.
Features:
* Natural marble texture like
* With germs-anti, wearable UV
coating on the surface
* Fire protection class: A
* Surfacehardness:3H-6H
Specifications:
6x910x2440mm ( 3'x8'); 6x1220x2440mm( 4'x8')
Other specifications can be customized. Please contact us for more design options.
LMSB306 LMSB308 LMSB309
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
Wood Texture series
Applications:
Exterior/interior wall, house, tunnel, airport, subway,
kitchen, bathroom, hospital, laboratory, marketplace,
meeting room, theater, office, lobby, etc.
Features:
* Natural wood texture like
* With germs-anti, wearable UV coating on the surface
* Fire protection class: A
* Surface hardness:3H-6H
Specifications:
6x910x2440mm (3'x8'); 6x1220x2440mm (4'x8')
Other specifications can be customized. Please contact us for more design options.
Solid Color series
Applications:
Exterior/interior wall, house, tunnel, airport, subway,
kitchen, bathroom, hospital, laboratory, marketplace,
meeting room, theater, office, lobby, etc.
Features:
* Soft, elegant and attractive colors
* With germs-anti, wearable UV coating on the surface
* Fire protection class: A
* Surface hardness:3H-6H
Specifications:
6x910x2440mm (3'x8'); 6x1220x2440mm (4'x8')
Other specifications can be customized. Please contact us for more design options.
Metallic Color series
Applications:
Exterior/interior wall, house, tunnel, airport, subway,
kitchen, bathroom, hospital, laboratory, marketplace,
meeting room, theater, office, lobby, etc.
Features:
* Metal-like colors
* With germs-anti, wearable UV coating on the surface
* Fire protection class: A
* Surface hardness:3H-6H
Specifications:
6x910x2440mm (3'x8'); 6x1220x2440mm (4'x8')
Other specifications can be customized. Please contact us for more design options.
LMSM207 LMSM211 LMSM215
LMSS135 LMSS136 LMSS138
LMSJ810 LMSJ815 LMSJ818
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
Drawing Pattern series
Applications:
Exterior/interior wall, house, tunnel, airport, subway,
kitchen, bathroom, hospital, laboratory, market place,
meeting room, theater, office, lobby, etc.
Features:
* Your favorite design/picture/photo can be drawn on the
board
* With germs-anti, wearable UV coating on the surface
* Fire protection class: A
* Surface hardness:3H-6H
Specifications:
6x910x2440mm (3'x8');
6x1220x2440mm (4'x8')
Other specifications can be
customized. Please contact us for
more design options.
Product Performance
Coating Performance:
Item Data Test Standard/Method
Freeze-thaw resistance No abnormality Each being put under 60oC and -20oC environments for 2
hours circularly for 2 times
Aberration-resistance ≥65min ASTMD968 Shrinkage factor (V/T)
Adhesive force No breaking off on the surface GB9286-1998
Hardness ≥3H GB/T6739-1996
Temperature difference
resistance -40~150oC No change GB/T17748-1999
Solvent-resistance Nethyl ethyl ketone>100, no
leakage GB/T17748-1999
Acid-resistance No abnormality GB/T17748-1999 10%NaOH 24hours
Alkalic resistance No abnormality GB/T17748-1999 10%HCl (10% Vitriol) 24 hours
Weathering resistance
(sunlight speed up)
Luster loss less than 30% after
3000H and color change lower
than 5NBS
GB/T16259-1996
Pollution resistance No abnormality
Scrawl on the painted surface with a black oil pen for 24
hours then wipe with methyl alcohol
Scrawl on the painted surface with a red crayon for 24 hours
then wipe with methyl alcohol
Drop 0.5ml sauce / other edible oil on the painted surface
then cover for 24 hours and finally wash
Scrawl on the painted surface with a rouge crayon for 24
hours and then wipe with methyl alcohol
Drop 0.5ml coffee+black tea on the painted surface, cover
for 24 hours and finally wash
Drop 0.5ml dishwashing liquid on the painted surface, cover
for 24 hours and finally wash
LMSC016 LMSC021
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
Substrate Boards Performance:
Item (Standard) Fiber Calcium Silicate Board
(JC/T 564-2000)
Fiber Cement Board
(JC/T412.1-2006)
Fiberglass Magnesium
Board
(JC688-2006)
Specification 2440x1220x6~18mm 2440x1220x3~8mm
Substrate Board Medium density High density
Density (g/cm3) 1.1≤D≤1.4 1.4≤D≤1.7 0.85≤D≤1.27
Water absorption Rate(%) ≤40 ≤28 ≤28
Wet-expansion Rate (%) ≤0.25 ≤0.25 ≤0.25
Rupture Strength
(Mpa)
Air dried ≥10 ≥16
≥20 Water
saturated
≥7 ≥13
Asbestos content 100% free of asbestos, accordant to HJ/T205-2005
Radioactivity Environment protection A class, accordant to GB6565-2001
Incombustibility Class A, accordant to GB8624-2006
Frost-resistance No rupture and shrinkage after undergoing for 25 times of freeze-thaw cycle
Water impermeability No damp or drip on the back after dipped with water 24 hours
Installation Methods:
Easy for installation by using strips(frames) and adhesive, with characteristics of quick construction,
water and fire proof, elegance etc.
* Sheet Boards Stickup * Hidden Fram Trim Strip Joint
* Decorative Trim Strip Sticking * Dry-hung Way
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
* Exposed Frame Trim Strip Joint
Project Examples (Stickup Type)
1. To confirm the first floor and clean up
* The first floor is well dry and plain.
* Make first floor neat and remove the
superficial garbage and the dust.
* Please use the gypsum plank or the prevented
fire plank in the first floor.
2. Fixed position
Fix position of first floor according to the
knothole size, shape of the decorating lineation.
3. The double side tape of glue to match
Glue to match on a position for settling the
double side tape, to compress tightly to make it
glue hard.
The usage measures for: Wall tight about
3.3m/m2, the ceiling about: 4.3m/m2.
4. Glue the usage that match the glue
Slice the mouth for glue soft tube, stay about
7mm of the width exports, then extrude the
glue.
Glue to match in a position (the flank of the tape) for settling the glue draw line form.
The usage and dosage: the wall about 0.5pcs/m2, and ceiling
about 0.6pcs/m2.
5. The insulation paper of double side tape does away with
Notice the removal of the tape and remove the insulation
paper.
6. Glue to match the decorating material
Drawing the top glues to match glue empress 10 min watch
inside will decorate the material glue to match in a position for
this.
Suppress by hand the position of the tape, make its glue to
match well.
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
Movement or Re-glue is not allowed.
7. Keep for one day
Maintain: At glue to match the glue harden the term proceeds to maintain.
Joint Methods:
Installation Accessories:
Board Process Instruction:
Processed by common air-operated or electrical miller, cutting machine or knife tool etc.
Fine-toothed or non-toothed types is recommended.
Use the drill miller to open slot, chamfer etc. the exposed part of the substrate board after processing
can be filled with the seal paint.
RYMAX
TM
CALCIUM SILICATE VENEER BOARD
Process Methods:
1. Cutting
Use the NT knife to line the top and bottom surface of the
board couple times during cutting by the stone saw or
electric cutting machine. Separate outwards the decorative
/ top surface and grind smoothly the rupture side.
2. Holes opening
Use the electric driller to drill the
small hole, Use the hole saw to
open the hole for installing wire and
pipe directly or drill some small
holes first and then saw the hole.
3. Use the knife and sand paper to
process well the hole after cutting and drilling.
Attentions to storage and Carriage
Make sure of the leveling handle of the board during installation, carriage and storage. Store at the
hard and flat ground / floor. Don’t carry the board by single person. Handle by 2 persons with hands
and make sure the level or vertical of the board.
RYMAX
TM
|green building materials supplier
07. OTHER RELATIVE PRODUCTS * Wood Wool Cement Board * Acoustic Wool
* Toilet Partition Board
* Fireproof Door Core Board
* Heat Insulation Panel * Absorber
* Heavy Duty Construction
Adhesive * Wood Wool
Acoustic Panel * Gap Filler
* Acoustic Soft Pack
* PVC Celuka Foam Board * Light Steel Keel
RYMAX
TM
WOOD WOOL CEMENT BOARD
RYMAX
TM
Wood Wool Cement Board
RYMAX
TM
Wood Wool Cement Board is a kind of high quality and multi-functional building materials made
by mixture Portland cement, wood fabric, and toxic free additives; it carries the features of cement and wood
which the other boards don’t have.
RYMAX
TM
Wood Wool Cement Board Features:
* High cement contents, strong cement texture;
* Unique pattern, nice artistic effects, rich connotation; conveys the natural, elegant, simplicity of
concrete and shows the generous, sedate characteristics;
* Wide usage, from Artistic Center, Museum to more places, not only the artistic places, e.g.
Business places, Office places, Entertainment places, Sport fields, and also house, school,
showroom, etc.
* Easy construction, the designer can achieve his design freely, and it can low the construction costs.
RYMAX
TM
WOOD WOOL CEMENT BOARD
Unique characteristics of RYMAX
TM
Wood Wool Cement Board:
* As light weight, flexible, good heat insulation, easy construction as wood; as strong, fireproof,
waterproof, mildewproof, termite resistant as cement;
* Widely used in decoration of interior/exterior wall, floor, ceiling, furniture, sound-insulation
wall; feelings of simplicity, nature, rich buddhist meaning;
* Rich specifications and it's high strength, not easy broken, high waterproof due to high density
and high content of cement;
* Excellent quality, high stability (Variability after water absorption <3%);
* Dual-surface, beautiful 3D texture on the rough pattern face; fine & smooth texture on the fine
pattern face, they all are the best choice of surface materials.
Technical Data:
Item Unit Data
Density kg/m3 1100-1300
Elasticity coefficient N/mm2 3000
Humidity % 12±3
Surface alkalinity pH 12
Impact resistance No crack, strip, penetrate, craze
Water permeability No water drop backside
Water absorption rate % 21.7
Moisture content % 12.4
Bending strength N/mm2 9.0-12.0
Bend broken load kgf 87.0
Heat transfer coefficient (K) kcal/m x r xoC 0.108
Thickness expansion (in water 24hrs) % <2
Specification mm 1200x2400x8、10、12、16、18、20、24
RYMAX
TM
ACOUSTIC WOOL
RYMAX
TM
Acoustic Wool
RYMAX
TM
Fiberglass Sound Absorption Wool
RYMAX
TM
Fiberglass Sound Absorption Wool is a kind of manmade inorganic fabric, the raw materials are
natural minerals such as Quartz Sand, Limestone, Dolomite, etc. with soda ash, borax, and so on. Under
melting condition, it’s bowed to be the Floe fine fiber by external force, there are stereo cross links between
fabrics and around each other, and also with plenty tiny gaps. These gaps can be called pores. RYMAX
TM
Fiberglass Sound Absorption Wool is called a kind of porous materials with good heat insulation and sound
absorption performances.
RYMAX
TM
Fiberglass Sound Absorption Wool is the fiberation of melting glass and become the cotton like
material; its chemical composition is of glass class, it's a kind of inorganic fabric and carries the features of
good molding performance, low volume density, low heat transfer rate, warm protection & heat insulation,
nice sound absorption, corrosion resistance, and chemical stability.
RYMAX
TM
ACOUSTIC WOOL
The fibers are fluffy and crosslink inside the RYMAX
TM
Fiberglass Sound Absorption Wool, it’s a typical
porous sound-absorption material with plenty of tiny pores and excellent sound-absorption characteristic. It
can be made to Wallboard, Ceiling board, Space sound absorption body, and so on. It can absorb plenty
sounds in the room, decrease mix-sound and noise of the room.
Technical Data:
Item Unit Data Standard
Density kg/m3 10-100 GB/T 5480.3-1985
Fiber average diameter μm 5.5 GB/T 5480.4-1985
Water content % ≤1 GB/T 3007-1982
Incombustibility Grade Grade A GB 8624-1997
Hot temperature load contraction oC ≥250 GB/T 11835-1988
Heat transfer coefficient (K) w/m·k 0.038-0.06 GB/T 10294-1988
Hydrophobic rate % ≥98.2 GB/T 10299-1988
Water absorption % ≤5 GB/T 16401-1986
Sound absorption 1.03,Mixed chorus 24kg/m3 2000HZ GBJ47-1983
Shot content % ≤0.3
Specifications:
Product Length
(mm)
Width/Diameter
(mm)
Thickness
(mm)
Density
(kg/m3)
Board 1200-2200 600-1200 20-100 24-96
Felt 11000,20000 1200 25-150 12,16,20,24,32,40,48
Roll 1000 15-400 20-100 45-90
RYMAX
TM
Sound Absorption Rock Wool
Rock wool is made from basalt. Melted basalt becomes artificial inorganic fibers through high-speed
centrifuge. Then after mixed with special binding agent and dust laying oil, it is processed to become
different heat insulation products. Rock wool products are wildly used in petroleum, chemical, metallurgy,
boating, textile for heat preservation purpose, and also in architectural constructions for insulation and
sound-absorbing purpose.
RYMAX
TM
TOILET PARTITION BOARD
RYMAX
TM
Toilet Partition Board
RYMAX
TM
Toilet Partition Board (Compact Laminate Board, Phenolic Resin Laminate Board) is a solid,
high pressure and extremely durable decorative building panel, made from layers of quality Kraft papers
impregnated with phenolic resin, and incorporates a clear overlay on both decorative faces and
manufactured under high pressure and high temperature.
Features:
* Strong resistance to impact
* Extremely durable and hard
* No toxic & totally hygienic
* Resistance to moisture & steam
* Chemical resistance
* Resistance to heat & cigarette burns
RYMAX
TM
TOILET PARTITION BOARD
Composition:
* High pressure color paper with melamine resin impregnation;
* High pressure Kraft paper (multi-layer) with phenolic resin impregnation;
Properties:
After high pressure curing with the above materials, the solid core board is the structure material, it can
be used separately and no need to paste on any base board, with higher strength, seamless joint and
completely waterproof.
Application:
* Toilet partition
* Shower partition
* Lockers
* Laboratory top
* Cabinet
* Compact laminate door
* Wall cladding
* Office furniture
* School furniture
RYMAX
TM
FIREPROOF DOOR CORE BOARD
RYMAX
TM
Fireproof Door Core Board
RYMAX
TM
Fireproof Door Core Board is a penetration of traditional products, it’s developed specially for
the requirements of Wooden Fireproof Door, Steel Fireproof Door with new special formula. It’s more
pertinence and superiority to the products due to the improvements on fireproof, plainness, strength,
dryness and waterproof properties.
Tested under China standard GB/T20285—2006, safety class of RYMAX
TM
Fireproof Door Core Board is
Grade ZA2, and tested under GB/T8624—2006, fireproof class of RYMAX
TM
Fireproof Door Core Board is
Grade A1 (highest grade).
Properties:
No deformation, crack, shrink under high temperature burning and high strength; it can double the
fireproof time than common fiberglass magnesium board, it’s the ideal filling material for all kinds of
fireproof doors, such as wooden fireproof door, steel fireproof door, etc.
RYMAX
TM
HEAT INSULATION PANEL
RYMAX
TM
Heat Insulation Panel
RYMAX
TM
Heat Insulation Panel is a new building material. It is manufactured under China JC/T47-2002
Standard. RYMAX
TM
Heat Insulation Aluminum Plastic Panel is sound insulation, heat insulation, durability,
fireproof, waterproof, frost resistance, alkali proof and acid proof, anti-cracking, hurricane resistance, etc. It
has no radiation, no pollution, and easy installation and maintenance. It is used as roof material for large
factory building, warehouse, exhibition hall, market building, farms, and gymnasium, and so on.
Sky blue aluminum tile
surface/ Aluminum plastic
protective film
Aluminum foil or White
plastic protective film
Silver aluminum tiles
surface/Aluminum plastic
protective film
Aluminum foil or White
plastic protective film
RYMAX
TM
HEAT INSULATION PANEL
Product color can be customized. (Color samples as below):
Features:
* Thermal conductivity below 0.2 (w/mk), contributed by outer metal reflecting material combined
with fiber glass magnesium as internal layer, which can help to reduce indoor temperature by 5oC.
* Good soundproof performance reduce noise caused by rain drops.
* High lateral/longitudinal bending strength than the China National Standard.
* Test approved to be safe in high acid environment.
* Good water resistance, non-dissolvable in water.
* Good fireproof performance ensures fire safety.
* 95% efficiency rate.
Scope of application:
Industrial area, Warehouse, Civil Building, Factory, Farm, Steel stud projects, etc.
RYMAX
TM
VIBRATION ABSORBER
RYMAX
TM
Vibration Absorber
RYMAX
TM
Vibration Absorber product description:
If you need sound-insulation, you first need vibration insulation.
Vibration (HiFi low frequency or other reasons) can cause the floor vibrated, then the vibration will
transfer to the air down to the floor, this will make the sound be transferred to rooms and channels up &
down; Meanwhile, the vibration will be transferred to the rooms on the other floors along the Rigid
continuously connected system, such as: wall, floor, pillar, base, etc. and cause borne sound transmission.
In order to reduce the sound level of low frequency and impact sound, beside the vibration sources control,
Vibration Absorber can be used to insulate the low frequency vibrations and impact sounds.
Specification:
50x50x25mm
Applications:
Sound insulation & Vibration absorption of entertainment places, such as: Bar, KTV, Kara OK, Night
Club.
RYMAX
TM
HEAVY DUTY CONSTRUCTION ADHESIVE
RYMAX
TM
Heavy Duty Construction Adhesive
Product Features:
* Provides strong bonds.
* Excellent water resistance.
* Cures fast.
* Wide product application range.
* Bonds treated lumber, wood, metal, stone & marble, concrete, gypsum board, brick ceramic tiles,
pottery, rigid plastics and mirrors.
* Easy to use - single sided VS double sided application use cartridge / caulking gun.
* Will not freeze - can apply in wet or cold weather.
* Environmentally friendly - passes the specification GB18583-2001
* Can apply on horizontal and vertical working surfaces.
* Made in USA
RYMAX
TM
HEAVY DUTY CONSTRUCTION ADHESIVE
Application Guide:
* Application temperature: -18oC~40oC
* Service temperature: -29oC~50oC
* Cut the nozzle at a 45 degree angle according to the required width of bead. To optimize the ease
of pushing the cartridge, use a long nail to make at least five punches through the nozzle to break
the seal.
* Coverage:
Weight 3mm 6mm 9mm
335g (310ml) package 40M 10M 4.5M
* Working time: 20~30min for a bead with 6mm.
* Working surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or
any other materials that may deter adhesion.
* Clean up - scrape off dried excess with a putty knife. Remove residue with mineral spirits or
equivalent solvent.
* The product is not designed for continuous submersion or for use on polystyrene or polystyrene
foams.
Physical Properties:
Type: Synthetic elastomeric polymer Solids: 65%
State: Medium-viscosity mastic Viscosity: 130,000cps
Color: Light tan Weight/liter: 1.079kg
Calculated VOC (less except solvent): 330g/L Flashpoint: less than -18oC
Freeze/thaw stability: will not freeze Storage life: 24months
RYMAX
TM
WOOD WOOL ACOUSTIC PANEL
RYMAX
TM
Wood Wool Acoustic Panel
RYMAX
TM
Wood Wool Acoustic Panel is a kind of multi-functional decorative sound absorption material
made by pure wooden fibric, no cement, nor any harmful component and organic volatile gases, it’s
completely fit the requirements of environment friendly and energy saving.
Elegant texture and unique taste can be shown on its filamentous texture surface, creativities and ideas
of designers can be achieved. Though the density of RYMAX
TM
Wood Wool Acoustic Panel is about 1/2 of the
traditional wooden board, it’s strong as cement and meanwhile it carries the features of sound absorption,
impact resistance, fireproof, waterproof, moisture proof, etc. It’s suitable for all decorations indoor and
outdoor.
RYMAX
TM
Wood Wool Acoustic panel is a kind of multi-functional decorative sound absorption board
combined the effects of acoustic and aesthetic, extraordinary space and unique decoration effects can be
achieved.
RYMAX
TM
WOOD WOOL ACOUSTIC PANEL
Specifications:
Size: 600x600mm, 600x1200mm, 600x2400mm
Thickness: 10mm, 15mm, 25mm
Other specifications can be customized.
Applications:
Cinema, Theatre, Music hall, Studio, Hall, Hotel,
Meeting room, Library, Lab, Night club,
Gymnasium, Church, School, Kindergarten,
Bowling building, workshop, and any other places
with sound absorption or noise treatment
requirements.
Features:
* Free Formaldehyde: Different production technology from traditional MDF/LDF/HDF, its completely
free of formaldehyde;
* Excellent Acoustic Properties: When sounds go through mass tiny hores inside the panel, sound
energy will change to kinetic energy, and then sound absorption effect can be got. After correct
installation, sound absorption effect can reach NRC0.95;
* Lightweight and Safe: The weight of RYMAX
TM
Wood Wool Acoustic Panel is about 1/2 of traditional
wooden sound absorption board, it reduce the weight of decorative suspension and wall at most,
more easy installation and safety;
* Strong impact resistance: With special treatments, characteristic of good reliability, stability and
mechanical damage resistance are carried;
* Easy cutting, simple installation: Common wood worktool is workable;
* Nice decorative effects: With its back-to-basics surface structure, it can meet EU’s design fashion
of returning to nature without surface decoration. Color can be freely painted, rich beautiful
effects can be achieved;
* Outstanding fire resistant properties;
Physical performance:
* Decorative effects: Wood wool texture, unique and natural styles;
* Fireproof properties: After special fireproof treatment, the panel passed national fireproof test B1
grade;
* High temperature resistance: No deformation under high temperature of 200oC;
* High impact resistance: Passed EU Drop Hammer Collision test, it can be used in all kinds of ball
stadium;
RYMAX
TM
GAP FILLER
RYMAX
TM
Gap Filler
RYMAX
TM
Gap Filler is made by high-quality raw materials with the formula from USA and production
technology from EU. It was developed according to different environment requirements and it carries the
features of stable, easy-use, environment-friendly.
Features:
1. No need punch tape and self-adhesive tape, easy and quick construction. (It will be better if
self-adhesive tape is used.)
2. Strong adhesive force, effectively avoid gap craze & layer separation of boards.
3. “Green” gap filling materials, no harm to human health.
Construction Method:
1. Clean the gap, it will be better to brush white latex once after that.
2. Stir before use, if the gap is less than 2~3mm, extend the gap with tool and then fill the filler up
to the Light Steel Keel, fully cover the surface.
3. After the filler fully dry (about 18hours), plain the board surface.
RYMAX
TM
GAP FILLER
Technical Data:
Item Unit Data
Component Single component
Appearance Paste
Type semiflex
Usage Humid RH 2%~98%
Density g/cm3 About 1.5
Packing kg/barrel 5, 10, 15, 30
Storage month 10 months in cool place
Drop dripless (20oC, 10x10mm) mm <2
Adhesive strength N/mm2 28
Surface dry(20oC, 80%RH) min About 30
Dry speed(20oC, 80%RH) mm/h 6.2/18
Bonding strength Mpa >1.3
Bending strength N/mm2 >12 (206o bended when break)
N/mm2 >60
Usage temperature oC -10~+45
Tensile strength Mpa >0.6
Max bearing temperature oC +130
Construction temperature oC >+10
Construction Usage
Right angle kg/m2 0.08~0.13
Chamfer angle kg/m2 0.18~0.20
Caution:
1. The filler dries slow, multi-filling is not allowed in order to keep the coagulation effect.
2. Only after 18 hours fully dry, next step can be processed.
3. Don’t mix with the other materials (e.g. Gypsum powder, talcum powder, etc.)
4. Seal storage for unused filler.
5. If it had dried up after long time storage, fill about 1cm height water, stir with suitable tool when
it return soft after soak, it can be used again after well distributed.
RYMAX
TM
ACOUSTIC SOFT PACK
RYMAX
TM
Acoustic Soft Pack
Features of RYMAX
TM
Acoustic Soft Pack:
* Cloth veneer with different colors and patterns are available and also can be customized. Material
of cloth veneer or frame can be adjusted according to your requirements;
* High sound-absorption frequency spectrum, nice sound absorption effects to all low / medium /
high frequency noise;
* Fire resistance, no dust pollution, high decoration properties and easy construction.
Structure of RYMAX
TM
Acoustic Soft Pack:
1. Product structure: It’s made by fire resistant resin frame with Grade A fireproof sound absorption
wool inside, and sound-absorption cloth or leather with special fire resistance treatment outside
(meet Grade B1 of GB8624 1997 and Grade C of GB8624 2006 requirements).
2. Product Type: Square, Fillet, Bevel, big Bevel
3. Specifications:
1200x600x25mm, 1200x600x50mm, 600x600x25mm, 600x600x50mm, 600x800x25mm,
600x800x50mm
Other specification can be customized.
RYMAX
TM
ACOUSTIC SOFT PACK
Sound absorption test:
Test result of 25mm thickness:
Test Condition Center Frequency (Hz) 125 250 500 1000 2000 4000
Solid installation Sound absorption rate (α) 0.2 0.23 0.56 0.8 0.85 0.95
With 10cm cavity background Sound absorption rate (α) 0.42 0.69 0.75 0.85 0.9 1.01
Test result of 50mm thickness:
Test Condition Center Frequency (Hz) 125 250 500 1000 2000 4000
Solid installation Sound absorption rate (α) 0.3 0.7 0.8 0.91 0.96 1.13
With 10cm cavity background Sound absorption rate (α) 0.58 0.87 0.87 0.95 1.13 1.2
Applications:
It's widely used in any high class, medium class decorative places with Acoustic requirements, such
as: Cinema, Theatre, Music hall, Studio, Hall, Hotel, Meeting room, Library, Lab, Night club,
Gymnasium, Church, School, Kindergarten, Bowling building, Workshop, House, Business room,
Hospital, etc.
Installation methods:
1. Flat lay: Use “^” type aluminum frame as supporter. First fix the keels steady and flat; with the
frames of keels, flatly lie the soft packs on keels, soft packs will be supported by the keels. This
installation method is simple construction and easy installation; the “^” type aluminum keel is the
supporter and also the seal joint.
2. Concealed keel suspension system: Under this method the soft pack is lay on surface of the
suspension system with concealed keel; there is a “Λ” type section or special shapes. Installation
steps: Suspend the keels flatly, groove the softpack around and then insert the keel into the
groove; the keel will hold the softpack steady.
3. Stick method:
<1> Compound flat stick method: The structure is keel + gypsum board + softpack. Fix the
gypsum boards on the light steel keels, mount the softpacks on gypsum boards with special
coating pins.
<2> Compound insert-stick method: The structure is keel + gypsum board + softpack. Fix the
gypsum boards on the light steel keels; stick several adhesive tap on back of softpack and
then paste flatly on the gypsum boards; mount the nail on tenon of softpack; align the
pattern and join the softpacks with plugins.
The gypsum board base should be very flat for Stick Installation Method, or slab ends, out of
flatness will be caused. While sticking, 874 construction adhesive can be used.
RYMAX
TM
PVC CELUKA FOAM BOARD
RYMAX
TM
PVC Celuka Foam Board
RYMAX
TM
Decorative PVC Foam Board is a kind of sandwich board. The core is PVC Foam Board(Celuka,
Rigid or Free foam board). Both faces are finished with PVC film, HPL (High pressure laminate), Acrylic or
Aluminum. Edge of the foam board can be sealed with PVC edge banding or Acrylic edge banding etc.
After that finishing processing, the physical properties of foam board are enhanced. The foam board will
become stronger and more durable. The Softening point can be increased to 120°C.
That kinds of board is perfect for decoration and widely use as door, cabinet, table top, interlayer etc.
Compared with other PVC foam board, RYMAX
TM
PVC foam board not only has much more smooth
surface, but also has the more skin hardness; and the mechanical performance is much better than the other
PVC foam boards.
RYMAX
TM
PVC CELUKA FOAM BOARD
Features:
* Strong and durable;
* Lightweight and easy to install;
* Not easy to scratch;
* Will not rot, warp, delaminate, cup or twist;
* Resistant to weather, shock and abrasion;
* Salt water corrosion resistant;
* Impervious to salts, insects and many chemicals, including some acids;
* Doesn't mold; Can be worked just like wood;
* Non-toxic; 100% recyclable; Fire-retardant (self-extinguishing);
* Easy to clean; Virtually maintenance free;
Applications:
* Construction (wall panels, ceilings, decoration etc.);
* Advertisement; Signage; POP;
* Cupboard (kitchen); Furniture board;
* Marine (seating, covers, shelving, cabinets, stairs, electronics & wall panels, door etc.);
* Water park;
* Seashore wet-proof facility;
* Various interlayer;
* Decoration board, upholstery for train, car and many more.
Specifications:
Standard board size is 1220x2440mm (48"x96");
Thickness: 10mm (3/8"), 12mm, 13mm (1/2"),15mm, 16mm (5/8"), 18mm, 19mm (3/4"), 20mm,
24mm, 25mm, 25.4mm (1");
Density: 0.4~0.8g/cm3;
Surface: smooth/smooth or smooth/wood grain pattern(timber ridge) finish;
Colors: available in White.
RYMAX
TM
LIGHT STEEL KEEL
RYMAX
TM
Light Steel Keel
RYMAX
TM
Light Steel Keel (used for partition and ceiling) is made from high quality cold-rolled galvanized
coils. The product features in high accuracy, standard thickness, good surface straightness, no deformation,
no bending, and no twisting, which effectively avoid installation error or cracks. Its unique punched pit
system can prevent self-tapping nails from sideslip, so to secure the connection between boards and light
steel keel, and also greatly improve construction efficiency. Light steel keel is mainly used with fiberglass
magnesium board, gypsum board and calcium silicate board.