IC3-1 Network security
Part 1 - Introductory network concepts
Matthew JoyceDresdner Kleinwort Wasserstein
IC3-1 2
Outline
1. Internet Protocols 2. Protocol hierarchies3. The OSI reference model4. Services in the OSI model5. Example networks
IC3-1 3
1. Internet Protocols
Network
Web Browser
Web Server
IC3-1 4
Application Layer
>How does web browser retrieve data from web server?
>Application Protocol: Hypertext Transfer Protocol (HTTP).
>Users invoke applications which “speak” using application protocol.
>Applications interact with a transport protocol to send or receive data.
>Others: FTP, SMTP, DNS, SMB, …
IC3-1 5
Application Layer Example
>HTTP outline: >GET /directory/dirsearch.html HTTP/1.1>Host: www.phoenix.co.uk
GET /directory/dirsearch.html HTTP/1.1Host: www.phoenix.co.uk
HTTP Message
IC3-1 6
Transport Layer
> Provides end-to-end communication between applications.
> Transport Protocol: Transport Control Protocol (TCP)
> A transport protocol may be reliable, flow may be regulated.
> Divides stream of application messages into packets.
> Interacts with Internet Layer to send or receive data.
> Others: UDP, ICMP
IC3-1 7
Transport Layer Example
> TCP outline:>Source Port: 1081>Destination Port: 80>Checksum: 0xa858
GET /directory/dirsearch.html HTTP/1.1Host: www.phoenix.co.uk
Src: 1081 Dst: 80Chksum: 0xa858
HTTP MessageTCP header
IC3-1 8
Internet Layer
> Communication between one machine and another.
> Accepts requests to send packets to destination address.
> Encapsulates packets in IP datagram with IP header and uses routing algorithm to decide if to send directly or indirectly.
> Also handles incoming IP datagrams. > If addressed to local machine, remove the IP
datagram header and pass up to transport layer.
IC3-1 9
Internet Layer Example
>IP outline:>Time to live: 128>Header checksum: 0x57d1>Source: pelican (192.168.0.40)>Destination: www.phoenix.co.uk (192.168.0.50)
GET /directory/dirsearch.html HTTP/1.1Host: www.phoenix.co.uk
Src: 1081 Dst: 80Chksum: 0xa858
Src: 192.168.0.40Dst: 192.168.0.50 TTL: 128
HTTP MessageTCP headerIP datagram header
IC3-1 10
Network Interface Layer
>Accepts IP datagrams and transmits over specific networks.
>Maybe a simple device driver (e.g. an Ethernet driver) or a complex subsystem with further data link protocols.
IC3-1 11
Src: 00:e0:81:10:19:fc Dst: 00:a0:cc:54:1d:4e Type: IP
Network Interface Layer Example
>Ethernet outline:>Destination: 00:a0:cc:54:1d:4e>Source: 00:e0:81:10:19:fc>Type: IP
GET /directory/dirsearch.html HTTP/1.1Host: www.phoenix.co.uk
Src: 1081 Dst: 80Chksum: 0xa858
Src: 192.168.0.40Dst: 192.168.0.50 TTL: 128
Ethernet Frame
IC3-1 12
Protocol Layering
Application Layer
Transport Layer
Internet Layer
Network Layer
Physical Network
Application Layer
Transport Layer
Internet Layer
Network Layer
Message
Packet
Datagram
Frame
Host A Host B
IC3-1 13
Protocol Layering
Application Layer
Transport Layer
Internet Layer
Network Layer
Physical Network
Application Layer
Transport Layer
Internet Layer
Network Layer
HTTP Message
TCP Packet
IP Datagram
Ethernet Frame
Web Browser Web Server
IC3-1 14
Internetworking
>No single networking technology can satisfy all requirements.
>Universal interconnection is desired.>Protocols allow communication between
nodes without understanding underlying mechanisms.
IC3-1 15
Routing
Web Browser
Web Server
Router
NetworkA
NetworkB
IC3-1 16
Protocol Layering
Application Layer
Transport Layer
Internet Layer
Network Layer
Physical Network
Application Layer
Transport Layer
Internet Layer
Network Layer
HTTP Message
TCP Packet
EthernetFrame
EthernetFrame
IP Datagram IP Datagram
Internet Layer
Network Layer
Physical Network
Host BHost A
Router
IC3-1 17
2 Protocol hierarchies
>Protocols are stacked vertically as series of ‘layers’.
>Each layer offers Services to layer above, shielding implementation details.
>Layer n on one machine communicates with layer n on another machine (they are peer processes/entities) using Layer n Protocol.
IC3-1 18
Layers, protocols & interfaces
Physical communications medium
Layer 1 Layer 1Layer 1 protocol
Layer 2 Layer 2Layer 1/2interface
Layer 1/2interface
Layer 2 protocol
Layer n protocolLayer n Layer n
Layer 2/3interface
Layer n-1/ninterface
Layer 2/3interface
Layer n-1/ninterface
Layer n/n+1interface
Layer n/n+1interface
IC3-1 19
Layer/interface design
>Important objective is ‘clean’ interfaces, having minimal set of well-defined services.
>Clean-cut interfaces enable:>minimisation of inter-layer communications>easy replacement of individual layers
>Set of layers and protocols is the Network Architecture.
IC3-1 20
Virtual & actual comms.
>Vital to understand difference between:>virtual and actual communications,>protocols and interfaces.
>Peer processes ‘think’ of communications as being ‘horizontal’ using protocol.
>Actual communications is via interfaces.>Peer process idea is key to network design.
IC3-1 21
Design issues
>Some issues affect many layers, e.g:>need to address data (say who it’s for),>possible need for setting up connections,>data transfer rules (simplex, half-duplex, ...),>error management,>deal with message component re-ordering,>flow control,>routing.
IC3-1 22
3 The OSI Reference model
>OSI Reference Model - internationally standardised network architecture.
>An abstract representation of an ideal network protocol stack
>OSI = Open Systems Interconnection>Specified in ISO 7498-1.>Model has 7 layers.
IC3-1 23
Internet Protocols vs OSI
Application
Presentation
Session
Transport
Network
Data Link
Physical
Application
TCP
IP
Network Interface
Hardware1
2
3
4
5
1
2
3
4
6
5
7
IC3-1 24
The OSI model
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
Application Layer
Presentation Layer
Session Layer
Transport Layer
Network Layer
Data Link Layer
Physical Layer
Communications subnet boundary
IC3-1 25
Lower/Upper Layers
>Layers 1-4 often referred to as ‘lower layers’
>Layers 5-7 are the upper layers.>Lower layers relate more closely to the
communications technology.>Upper layers relate to application.
IC3-1 26
Layer 7: Application Layer
>Home to wide variety of protocols for specific user needs, e.g.:>virtual terminal service,>file transfer,>electronic mail,>directory services.
IC3-1 27
Layer 6: Presentation Layer
>Concerned with representation of transmitted data.
>Deals with different data representations, e.g. of numbers, characters.
>Also deals with data compression and encryption.
>Layer for source coding.
IC3-1 28
Layer 5: Session Layer
>Allows establishment of sessions between machines, e.g. to>allow remote logins>provide file transfer service.
>Responsible for dialogue control.>Also performs token management and
synchronisation.
IC3-1 29
Layer 4: Transport Layer
>Basic function is to take data from Session Layer, split it up into smaller units, and ensure that the units arrive correctly.
>Concerned with efficient provision of service.
>The Transport Layer also determines the ‘type of service’ to provide to the Session Layer.
IC3-1 30
Layer 3: Network Layer
>Controls the subnet.>Key issue is routing in the subnet; can be
based on:>static tables,>determined at start of session,>highly dynamic (varying for each packet).
>Also responsible for congestion control.
IC3-1 31
Layer 2: Data Link Layer
>Provides reliable, error-free service on top of raw Level 1 service.
>Breaks data into frames. Requires creation of frame boundaries.
>Frames used to manage errors via acknowledgements and selective frame retransmission.
IC3-1 32
Layer 1: Physical Layer
>Concerned with bit transmission over physical channel.
>Issues include:>definition of 0/1,>whether channel simplex/duplex,>connector design.
>Mechanical, electrical, procedural matters.
IC3-1 33
4 Services in the OSI model
>In OSI model, each layer provide services to layer above, and ‘consumes’ services provided by layer below.
>Active elements in a layer called entities.>Entities in same layer in different machines
called peer entities.
IC3-1 34
Layering Principles
(N+1) EntityService User
(N) EntityService Provider
(N+1) EntityService User
(N) EntityService Provider
Layer N ServiceAccess Point (SAP)
Layer N protocol
N+1PDU
Layer N+1 protocol
SDU
PDU - Protocol Data UnitSDU - Service Data Unit
NPDU
NPDU
IC3-1 35
Connections
>Layers can offer connection-oriented or connectionless services.
>Connection-oriented like telephone system.>Connectionless like postal system.>Each service has an associated Quality-of-
service (e.g. reliable or unreliable).
IC3-1 36
Reliability issues
>Reliable services never lose/corrupt data.>Reliable service costs more.>Typical application for reliable service is file
transfer.>Typical application not needing reliable
service is voice traffic.>Not all applications need connections.
IC3-1 37
Services and protocols
>Service = set of primitives provided by one layer to layer above.
>Service defines what layer can do (but not how it does it).
>Protocol = set of rules governing data communication between peer entities, i.e. format and meaning of frames/packets.
>Service/protocol decoupling very important.
IC3-1 38
5 Example networks
>Local area networks (IEEE 802)>Internet (TCP/IP)>ISDN>GSM, 3G
IC3-1 39
Local Area Networks
>The IEEE 802 standards have come to dominate LANs. They specify protocols for use at Layers 1 and 2.
>LANs (Local Area Networks) used within limited areas (e.g. buildings/campuses) as opposed to WANs (Wide Area Networks).
>ISO/IEC 8802-n = IEEE 802.n
IC3-1 40
IEEE 802
>IEEE 802.2 = Layer 2 (most of).>IEEE 802.3, 802.4 and 802.5 are three
options for Layer 1 (and a bit of Layer 2).>IEEE 802.3 = Ethernet.
IC3-1 41
ISDN
>ISDN=Integrated Services Digital Network.>ISDN enables public-switched telephone
network to carry data as well as voice.>Current (N-ISDN) offers 64 kbit/sec channels
- via modern telephone exchanges.>Can be used to support variety of
applications - e.g. video-conference.
IC3-1 42
GSM & 3G
> Global System for Mobile Communications> Digital technology and time division multiple access
transmission methods.> Voice is digitally encoded, allowing very efficient data
rate/information content ratio.> Open, non-proprietary standard
> 3G is 3rd generation GSM> High end services including substantially enhanced
capacity, quality and data rates than currently available. > Makes video on demand, high speed multimedia and
internet access possible.
IC3-1 43
The Internet
>Internet - evolved out of a US Government funded network (ARPANET).
>Developed in parallel with OSI so it does not conform.
>Has its own protocols at layers 3/4 called TCP (layer 4) and IP (layer 3).
>Has pushed OSI out (de facto beats de jure)>Now 5 million web sites, 200 million users.
IC3-1 Network security
Part 2 - Introductory security concepts
IC3-1 45
Outline
1. Introduction2. Security domains and policies3. Security threats4. Security services5. Security mechanisms
IC3-1 46
1 Introduction
>ISO 7498-2:>provides standard definitions of security
terminology,>provides standard descriptions for security
services and mechanisms,>defines where in OSI reference model security
services may be provided,>introduces security management concepts.
IC3-1 47
Security life-cycle
>Model is as follows:>define security policy,>analyse security threats (according to policy),>define security services to meet threats,>define security mechanisms to provide services,>provide on-going management of security.
IC3-1 48
Threats, services and mechanisms
>A security threat is a possible means by which a security policy may be breached (e.g. loss of integrity or confidentiality).
>A security service is a measure which can be put in place to address a threat (e.g. provision of confidentiality).
>A security mechanism is a means to provide a service (e.g. encryption, digital signature).
IC3-1 49
2 Security domains and policies
>In a secure system, the rules governing security behaviour should be made explicit in the form of a Security policy.
>Security policy: ‘the set of criteria for the provision of security services’.
>Security domain: the scope of a single security policy.
IC3-1 50
Generic security policy
>ISO 7498-2 generic authorisation policy:>‘Information may not be given to, accessed by,
nor permitted to be inferred by, nor may any resource be used by, those not appropriately authorised.’
>Possible basis for more detailed policy.>N.b. does not cover availability (e.g. denial
of service) issues.
IC3-1 51
Policy Types
>ISO 7498-2 distinguishes between 2 types of security policy:>identity-based: where access to and use of
resources are determined on the basis of the identities of users and resources,
>rule-based: where resource access is controlled by global rules imposed on all users, e.g. using security labels.
IC3-1 52
3 Security threats
>A threat is:>a person, thing, event or idea which poses some
danger to an asset (in terms of confidentiality, integrity, availability or legitimate use).
>An attack is a realisation of a threat.>Safeguards = measures (e.g. controls,
procedures) to protect against threats.>Vulnerabilities = weaknesses in safeguards.
IC3-1 53
Risk
>Risk is a measure of the cost of a vulnerability (taking into account probability of a successful attack).
>Risk analysis determines whether expenditure on (new/better) safeguards is warranted.
IC3-1 54
Fundamental threats
>Four fundamental threats (matching CIA+ legitimate use):>Information leakage, >Integrity violation,>Denial of service,>Illegitimate use.
IC3-1 55
Fundamental Threat Examples
>Integrity violation>USA Today, falsified reports of missile attacks on
Israel, 7/2002
>Denial of service>Yahoo, 2/2000, 1Gbps
>Information Leakage>Prince Charles mobile phone calls, 1993
>Illegitimate use>Vladimir Levin, Citibank, $3.7M, 1995
IC3-1 56
Primary enabling threats
>Realisation of any of these threats can lead directly to a realisation of a fundamental threat:>Masquerade,>Bypassing controls,>Authorisation violation,>Trojan horse,>Trapdoor.
IC3-1 57
Primary Enabling Threat Examples
> Masquerade> Royal Opera House web site, 8/2002 – Information
Leakage
> Bypassing controls> ADSL modem passwords – Illegitimate Use
> Authorisation violation> Cross site scripting – Information Leakage
> Trojan horse> PWSteal.Trojan, 1999 – Information Leakage
> Trapdoor> Ken Thompson, Unix login – Reflections on Trusting Trust,
1975 - Illegitimate Use
IC3-1 58
4 Security services
>Security services in ISO 7498-2 are a special class of safeguard applying to a communications environment.
>Hence they are the prime focus of IC3.>Computer security safeguards are covered
in IC4.
IC3-1 59
Security service classification
>ISO 7498-2 defines 5 main categories of security service:>Authentication (including entity authentication
and origin authentication),>Access control,>Data confidentiality,>Data integrity,>Non-repudiation.
IC3-1 60
Authentication
>Entity authentication provides checking of a claimed identity at a point in time.
>Typically used at start of a connection.>Addresses masquerade and replay threats.>Origin authentication provides verification
of source of data.>Does not protect against replay or delay.>GSM, webservers
IC3-1 61
Access control
>Provides protection against unauthorised use of resource, including:>use of a communications resource,>reading, writing or deletion of an information
resource,>execution of a processing resource.
>Remote users
IC3-1 62
Data confidentiality
>Protection against unauthorised disclosure of information.
>Four types:>Connection confidentiality,>Connectionless confidentiality,>Selective field confidentiality,>Traffic flow confidentiality.
> Internet banking session>Encrypting routers as part of Swift funds
transfer network
IC3-1 63
Data integrity
> Provides protection against active threats to the validity of data.
> Five types:> Connection integrity with recovery,> Connection integrity without recovery,> Selective field connection integrity,> Connectionless integrity,> Selective field connectionless integrity.
> MD5 hashes http://www.apache.org/dist/httpd/binaries/linux/
IC3-1 64
Non-repudiation
>Protects against a sender of data denying that data was sent (non-repudiation of origin).
>Protects against a receiver of data denying that data was received (non-repudiation of delivery).
>Analagous to signing a letter and sending recorded delivery
IC3-1 65
5 Security mechanisms
>Exist to provide and support security services.
>Can be divided into two classes:>Specific security mechanisms, used to provide
specific security services, and>Pervasive security mechanisms, not specific to
particular services.
IC3-1 66
Specific security mechanisms
>Eight types:>encipherment,>digital signature,>access control mechanisms,>data integrity mechanisms,>authentication exchanges,>traffic padding,>routing control,>notarisation.
IC3-1 67
Specific Mechanisms 1
> Encipherment mechanisms = encryption or cipher algorithms.> Can provide data and traffic flow confidentiality.
> Digital signature mechanisms> signing procedure (private),> verification procedure (public).> Can provide non-repudiation, origin authentication and
data integrity services.
> Both can be basis of some authentication exchange mechanisms.
> More in IC2, IC3
IC3-1 68
Specific Mechanisms 2
> Access Control mechanisms> A server using client information to decide whether to
grant access to resources> E.g. access control lists, capabilities, security labels.
> Data integrity mechanisms> Protection against modification of data.
> Provide data integrity and origin authentication services. Also basis of some authentication exchange mechanisms.
> Authentication exchange mechanisms> Provide entity authentication service.
> More later in IC4
IC3-1 69
Specific Mechanisms 3
> Traffic padding mechanisms> The addition of ‘pretend’ data to conceal real volumes of
data traffic.> Provides traffic flow confidentiality.
> Routing control mechanisms> Used to prevent sensitive data using insecure channels.> E.g. route might be chosen to use only physically secure
network components.
> Notarisation mechanisms> Integrity, origin and/or destination of data can be
guaranteed by using a 3rd party trusted notary.> Notary typically applies a cryptographic transformation to
the data.
IC3-1 70
Pervasive security mechanisms
>Five types identified:>trusted functionality,>security labels,>event detection,>security audit trail,>security recovery.
IC3-1 71
Pervasive Mechanisms 1
> Trusted functionality> Any functionality providing or accessing security
mechanisms should be trustworthy.> May involve combination of software and hardware.
> Security labels> Any resource (e.g. stored data, processing power,
communications bandwidth) may have security label associated with it to indicate security sensitivity.
> Similarly labels may be associated with users. Labels may need to be securely bound to transferred data.
IC3-1 72
Pervasive Mechanisms 2
> Event detection> Includes detection of
> attempted security violations,> legitimate security-related activity.
> Can be used to trigger event reporting (alarms), event logging, automated recovery.
> Security audit trail> Log of past security-related events.> Permits detection and investigation of past security breaches.
> Security recovery> Includes mechanisms to handle requests to recover from
security failures.> May include immediate abort of operations, temporary
invalidation of an entity, addition of entity to a blacklist.
IC3-1 73
Services versus mechanisms
>ISO 7498-2 indicates which mechanisms can be used to provide which services.
>Illustrative NOT definitive.>Omissions include:
>use of integrity mechanisms to help provide authentication services,
>use of encipherment to help provide non-repudiation service (as part of notarisation).
IC3-1 74
Service/mechanism table I
Mechanism Service
Enciph- erment
Digital sign.
Access Control
Data integrity
Entity authentication Y Y
Origin authentication Y Y
Access control Y
Connection confidentiality Y
Connectionless confidentiality Y
Selective field confidentiality Y
Traffic flow confidentiality Y
Connection integrity with recovery Y Y
Connection integrity without recovery Y Y
Selective field connection integrity Y Y
Connectionless integrity Y Y Y
Selective field connectionless integrity Y Y Y
Non-repudiation of origin Y Y
Non-repudiation of delivery Y Y
IC3-1 75
Service/mechanism table II
Mechanism Service
Auth. exchange
Traffic padding
Routing Control
Notaris- ation
Entity authentication Y
Origin authentication
Access control
Connection confidentiality Y
Connectionless confidentiality Y
Selective field confidentiality
Traffic flow confidentiality Y Y
Connection integrity with recovery
Connection integrity without recovery
Selective field connection integrity
Connectionless integrity
Selective field connectionless integrity
Non-repudiation of origin Y
Non-repudiation of delivery Y
IC3-1 76
Services versus layers
>ISO 7498-2 lays down which security services can be provided in which of the 7 layers.
>Layers 1 and 2 may only provide confidentiality services.
>Layers 3/4 may provide many services.>Layer 7 may provide all services.
IC3-1 77
Service/layer tableService/layer table
Layer Service
Layer 1
Layer 2
Layer 3
Layer 4
Layer 5/6
Layer 7
Entity authentication Y Y Y
Origin authentication Y Y Y
Access control Y Y Y
Connection confidentiality Y Y Y Y Y
Connectionless confidentiality Y Y Y Y
Selective field confidentiality Y
Traffic flow confidentiality Y Y Y
Connection integrity with recovery Y Y
Connection integrity without recovery Y Y Y
Selective field connection integrity Y
Connectionless integrity Y Y Y
Selective field connectionless integrity Y
Non-repudiation of origin Y
Non-repudiation of delivery Y