BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 1
Improving Collaboration with Cabin Suppliers
Bernd FeldvossService Package Manager PLM Data ExchangeAirbus Operations GmbH
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 2
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 3
Putting Europe back on the civil aviation scene
History
September 2014Bernd Feldvoss - IDOB2
Page 3
© AIRBUS S.A.S. All rights reserved. Confidential and propretary document.
French, German and British governments agreement on the development of an European aircraft
1967
A300 first flight
World‘s first twin-aisletwin-engine widebodyaircraft
1972
A300-600 first flightA modern versionof A300
1983
A340 first flightFour engines,long-haul aircraft
1991
1,000th aircraftDelivery
A321 first flightExpanding theA320 family
1993
A319 first flightExpanding theA320 family
1995
A300-600STfirst flight
1994
A330 first flightTwo engines,long-haul aircraft
1992
A320 first flightA new family, the widest single aisle cabinFirst fly-by-wire flight controls & side stick controllers
1987
A310 first flightTwo men cockpit
1982
Creation ofAirbus Industrie GIE(Grouping of Economic Interest)
1970
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 4
The world leading aircraft manufacturer
History
September 2014Bernd Feldvoss - IDOB2
Page 4
© AIRBUS S.A.S. All rights reserved. Confidential and propretary document.
Airbus integratedcompany
A340-600 first flight
2001
5,000th aircraftorder
2004
A350XWBIndustrial launch(Extra wide-body)
2006
A400M first flight
2009
10,000th aircraft order
7,000th aircraftdelivery
2011
Final assembly ofthe first A350XWBFirst-ever commercial “Perfect flight” with an A319 – cutting CO2 emissions by more than 40%First U.S. production facility in Mobile, Alabama
2012
6,000th aircraft delivery
A320neoIndustrial launchnew engines option
2010
5,000th aircraftdelivery
First Chinese production facility in Tianjin
2007
A380 first flight
2005
3,000th aircraftdelivery
A318 first flightExpanding the A320 familyA340-500 first flight
2002
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 5
2013 Aircraft orders (net) valued at:US$225 billion
2013 deliveries valued at:US$81.2 billion
More than13 815 orders
Over380 operators
More than8 256 deliveries
September 2014Bernd Feldvoss - IDOB2
Page 5
© AIRBUS S.A.S. All rights reserved. Confidential and propretary document.
Part of Airbus Group
Oneintegrated company
The world’s leadingaircraft manufacturer
More than 7 600 aircraftin operation
59,000 Employees -more than 100 nationalities
Airbus: a global company
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 6
Industrial sites and engineering centres
Engineeringcentres
Industrialsites
Airbus today
September 2014Bernd Feldvoss - IDOB2
Page 6
© AIRBUS S.A.S. All rights reserved. Confidential and propretary document.
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 7
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 8
Collaboration within Cabin – Airbus Toolset
EE PORTAL SERVICES
VPM A350
Opened to Extended Enterprise
PLM SIRR
PSE A350
ICC-CADB
PRIMES Services SSI A350
[626.a] CA codes
PRIMES Services Systems A350
ACMMACC2
[629] MP Dictionnary
[431.a] MPDictionary
PDMLink Systems A350
[171.e] TargetConfiguration Set
[657.a] System Definition
APEDDA350
SETIM A350
CM Reporting
CKD
ESDB
SeeXP A350
[506] ESD CAD Files
ICCPREM7
ELCODATA A350
SADM A350
ESD CR A350
[513] ESD CAD files +CIRCE File
ARPMasterData
[632] Concept phaseconf data
File System
Master Std PartCADLib (+reused
part)
Catia V5 A350
CLHT
ZAMIZ
SYSCONF
PARADIME
[616] Pre FINDefinition
DTS-PSS
[658] SWIRDManagement
[545] ESD listeffectivity
[505]Geometrical
Harness
TreND A350
IRIS[633] IRIS
Data
File System
A350 Master Primes SSIROA
[670] CAD DataReplicated
File System
A350 Master MDMROA
MDM RCENTRAL USE
[531] Primes ROAReplication
NetDMU A350
[671] SSI ProductStructure
File System
ReplicatedDMU ROA
DMU Server A350
File System
A350 DMU ROA
[514] ProductStructure &Attributes
[527] Mock-UpPublication
MDEX A350
File System
A350 Primes ROA
File System
Replicated Trenda350 dataset
[676]
[677]
[678]
File System
Trend A350dataset
[679] DMUPublishing
[680] DMUReplication
[681.c] J&Ttop reference
DELMIA MFG Client A350
File System
Std Part CADLib(+reused part)
[092] Std PartReplication
File System
A350 MasterElectrical CADLIB
File System
A350 ElectricalCADLib
[687] ShortPart Number
File System
A350 Master ReusedParts CADLib
File System
A350 Reused PartsCADLib
[689] ReusedParts
Replication
AirbusSupply SPAN
[517] DMUReplication
Status : pre M5 A350 PLM Suite 5.1.1 Applicative ArchitectureA350 PLM Suite 5.1.1 Applicative Architecture
[504] PreFIN-CI
dictionary
[171] TargetConfiguration Set
[695] PSS DataReplication
KIWI Tool
v ia P S S
[705] ATA, Sub ATA, Circuit Letter
CIRCE-C A350
CIRCE-I A350
[171.d] TargetConfiguration
Set
AIN
[517] DMUReplication
[531] PrimesROA
Replication
[545] ESDlist
effectivity
m a n u a l
[171.d] TargetConfiguration
Set
[689] ReusedParts
Replication
[687] Short PartNumber
[670] CAD DataReplicated
[680] DMUReplication
[513] ESD CADfiles + CIRCE
File
[092] Std PartReplication
AIN
[707] ESDDefinition
[707] ESDDefinit ion
[711.a] ESD Drawing
PANOGEN
[681.c] J&Ttop reference
[572]BookingService
MPM[715] MPDefinition
[716] MPDefinition
[720] Datafor KPI
[171.a] TargetConfiguration Set
AST
[721] Data for Reports
[724] Data forcalculation and
comparison
[725] Datafor KPI
[726] Data ForReports
[727] Data ForReports
PDMLink CC
EECT A350
CCDR
PACELAB A350
Stacking rules
new interfaces
new application
Legend
[505]Geometrical
Harness
[572] BookingService
MDM-R Client[728] Check out
[729] Check in
[729] Check in
[728] Check out
BOXI
Oracle 10
A350 VPMDatabase
A350 VPMRepository
[589] A/CPS
VPM 3DCom Client A350
[588] Check In
[587] CheckOut
[588] Check In
[587] Check Out
HTTP Server
[594]
[592] A/C CADData
[592] A/C CADData
[593]
[590]VPM/DELMIA:
PP
[591]VPM/DELMIA:
PP
[590] VPM/DELMIA: PP
[591] VPM/DELMIA:PP
[583] [584]
ERPA-F
File System
A350 MDM ROA A-F
[649]HighLevelConfData
[709] Thick link
[709] Thicklink
A350 MasterEquipment ROA
[731] Equipmentmodel
[732] Equipmentmodel
Replication
[732] Equipment modelReplication
File System
A350ReplicatedEquipment
ROA
DELMIA V5
UEA Tool NG
Supplier Company Layer
CADL
[593]
[594]
[595]
DTS-PSS
[750] ESD-DSList
[734.a]Archivedstatus
[734.a]Archivedstatus
[706] Data ForReports
DELMIA MFG Hub A350
[731]Equipment
model
[614.a] Pre FIN definition
[614.b] Pre FIN definit ion
[712][657.c] Pre FINDefinition + FIN
Definition
[695] PSSData
Replication
[634.a] Eqt Model Dictionnary
[634.c] Eqt Model Dictionnary
[615.b] EQ Unit Dict ionary
[615.a] Pre EQ Unit
[526.b] CAT, CN, Impact CN/PFIN-CI, Req per FIN-CI
[634.b] Eqt Model Dictionnary
D T S -P S S
[717] Preliminary FINDefinition
[526.a] CAT,CN, Impact
CN/PFIN-CI
[777] ACCtables
access
[711.b] ESD Drawing
[753] TRS: MPImpacts on FIN
CI
[753] TRS: MPImpacts on FIN
CI
[754]Engineeringfeedback(FIN-CI)
[754]Engineering
feedback (FIN-CI)
D T S -P S S
[622] Engineeringfeedback (ESD-CI)
[757] Delta 1Eqpt
[766] TargetConfiguration
Set
[630] As specified baseline
[771]CA/FIN
CI
[771] CA/FIN CI
CIRCE-G A350
[171.e] TargetConfiguration
Set
BDIE A350
CIRCE-PA350
ECDB A350
[793] indus. wiresharness
[659] FIN StandardItems
[787] FINStandardItems
[663]Equipement
Definition(released)
[661] FINInstallation +
effectivity
[788]ESDwiredef
[789] HarnessDefinition
[790] Harness BranchDiameter
[795] HarnessDefinit iondossier
[797] ADAP-CI dictionary
[798] FIN-CIdict ionary
[798] FIN-CIdictionary
D T S -P S S
[800] ESDDictionary
CES
[621]
[620]
[782] Link s CA - P/N per MSN
[794] TargetConfiguration
Set
[69]
DTS-PSS[792] EquipPurchase
Order
[713] Delta 2 baseline SSI
[760] Delta 2baseline for Eqpt at
CI level
[759] Delta 2baseline for Eqpt
at CA level
[742] ACMM access table
[647] ARP feeding forequipement
[806] VU/VB As Specified
[807] VU/VB CA referential
[808] VU/VB As Designed
SAP Corporate-1
[810]
[811]Instruction
Sheets
[811]Instruction
Sheets
[812]Routing
[813] RoutingUpdate
[813] RoutingUpdate
[812]Routing
[809] VU/VB Dictionary
[814]VU/VB CAreferential
[814]VU/VB CAreferential
GRAIL
[815] ADAP-CI Dictionary
[816] Delta2 baseline
VU/VB
Local ARP
[792] EquipPurchase
Order
updated interfaces
3DQM[634.aa] Eqt Model Dictionnary
[615.bb] EQ Unit Dictionary
File System
A350 MasterEquipement
CADLib
File System
A350Equipment
CADLib
[691]Equipement
CAD &Visualisation
Models
[691]Equipement
CAD &Visualisation
Models
SMS
CMS
[783] Serial FINDefinition
[171.b] Target Configuration Set
[820] TRS: MP impacts on ATA-Circuit
[821]Engineeringfeedback(VU/VB) [821]
Engineeringfeedback(VU/VB)
PDMLink SSCI A350
[609]Engineeringfeedback
(ADAP-CI)
[603] TRS:MPImpacts onADAP-CI
[509.b] SSI Definition
[734.b.b] Archived Status
[171.c.c] Target Configuration Set
[626.b.b] CA codes
[599.b] Pre FINDefinition
[602.b] Standard part metadata
[650.b] SSI MetaData +CAD models (P2V)
[740.b] SSI Cad Model Publication
[723.b] IdentNumbers
[600.b] IdentNumbers
[600.b] IdentNumbers
[723.b] IdentNumbers
[585.b] CheckOut (V2P)
[586.b]Check In
(V2P)
[585.b] CheckOut (V2P)
[586.b]Check In
(V2P)
[576.b] CheckIn/ Check out
PDMLink SSCIA350 Client
[576.b] CheckIn/ Check out
[888] ATABreakdown &Circuit letter
[889] link CA - ADAP-CI
[891] ATABreak down &Circuit Letter
[891] MP impacts onATA Circuit Code &
breakdown code
[891]
[892] MP Impacts onATA Circuit Code &Breakdown Code
[896] CAIRChapter 3
[898] CAIRChap 0,2,4
[898] CAIRChap 0,2,4
[899] APEDD feedback
ISMD
[743] BITELRU
definition
BFEMS[899] Equipment definition
via PSS[501] Preliminary Equipment List
[745] StandardPart
[745]Standard
Part
[746]Standart
Part
[976b] User/role/team
via PSS
[792b] P.O.Feedback
[792b] P.O.Feedback
[652] FIN CIReplication
[652] FIN CIReplication
[895] CA Composition in FIN-CI
[733]
PRIMES ARPFeeding A350
[653] ARP Feedingfor SSI
[791] ARPfeeding for
SSI
[791] ARPfeeding for
SSI
[613.b]ARP
Feeding
[613.b]ARP
Feeding
A380 IS(“4+1”)
One IS by Natco+ One common IS
A400M IS(“Fourfold”)
One IS multiplied by 4+ One common IS
A350 IS(“Single 1”)
One central IS
Page 8
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 9
Collaboration within Cabin – Airbus Legacy cDMU
A - E
A - FA - D
A - UK
CATIA V4, CATIA V5 VPM
CADDS5,CATIA V5Optegra
CADDS5, CATIA V4, CATIA V5 OptegraPRIMES
CATIA V4, CATIA V5 Optegra
Hamburg Bremen
Filton
Toulouse
Madrid
Interfaces: n * (n-1) = 12With Harmonization of• Processes• Data• IT Architecture and formats
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 10
Collaboration within Cabin – Airbus Toolset
A320 Family/A380/A330 A400M
DMU tools V5
Dvise
Dvise
PRIMES CR
See XP
CATIA V5
DMU tools V5
DMUNav
Dvise
See XP
CATIA V5
DMU tools V5
DMU ServerVPM
PDM Link SSCI
A350 XWB
PDM
DMU
AuthoringTR
EN
D
DM
U S
er
TREND
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 11
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 12
Cabin Customization
• Airline
• Design Agency
• Equipment Supplier/Manufacturer
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 13
Cabin Customization
CGM ITCM CDF
Customerrequest for
change“Installation of
a sofacompartment”
exam
ple
Cus
tom
izat
ion
initial customerdesign concept-3D data based
Customer request
transferred inAirbus Definition system
-2D textural
Airbus interface assembly creation
-3D data based
1st concept fit checkassembly
final concept fit checkassembly
VHO PDR CDR
• CGM Customer Guidance Meeting• ITCM Initial Technical Coordination Meeting• CDF Contractual Definition Freeze• VHO Version Hand Over• PDR Preliminary design review• CDR Critical design review
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 14
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 15
Airbus 3D Representation Formats
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 16
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 17
Collaboration within Cabin – Discussion
• Product Structure & Meta Data• PLM XML, STEP AP214 or STEP AP242 XML (preferred & target)
– Product Structure– Meta Data
– Release Status (in work, publish, released)– English Description– Original Part ID (for communication in case of renaming)– Effectivity (MSN validity)
• Geometry (JT ISO V1)• JT (incl. 3 LOD’s)• Material• Geometry properties (volume, center of gravity, …)• Always millimeter as unit
• In case only JT delivered JT per part or monolithic?• Incremental Exchange should be supported
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 18
Collaboration with Cabin – Challenges
• Correct CATIA Version/Release• IP Protection (native CATIA data with History,
parametric, constraints etc.)• Naming / Numbering• Level of Details (BoM, moveable parts etc.)
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 19
A380 Flight Crew Rest Compartment
Reference Source Data
Elysium Neutral Format
Healing for JT
JT
CATIA V4 CATIA V5R17 Exact LOD XT Hybrid CATIA
V5R21
Polygon BREP LOD + XT
Models 187
CATparts 2104 1989
CATproducts 664 1421
Processing Time (H:M:S) weeks 29:19:07 00:18:0000:10:44 00:06:30 00:10:52
Size (MB) 1469 943 266 347 49 87 134 301
Objective is to take into account of STEP AP242 as soon as available
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 20
A380 Flight Crew Rest Compartment
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 21
A380 Compartment
Input Filename 5zk001bl511_B.jt
Conversion NX JT CATIA V5R21
Input File Size Translator Translation Time Output File Size
174 MB JT -> V5 R21 00:15:53 530 MB
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 22
Collaboration with Cabin – future way of working in project under discussion
Native CAD Export JT Validate JT
Errors detected
Compare & ValidateJT to V5 TranslateAirbus Rename
Release to Airbus
Investigation with STEP AP242 when tools available
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 23
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 24
Collaboration within Cabin – Used Documents
• ProSTEP iViP association• JT Content Harmonization• Recommended Practices for AP242 XML Assembly Structure• JT Workflow Forum Use Cases• 4th JT Benchmark
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 25
Collaboration within Cabin – ProSTEP iViP activities
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 26
Collaboration within Cabin – JT Workflow Use Cases
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 27
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 28
Collaboration within Cabin – STEP AP 242 status (1/2)
• Finalization of the publication by ISO of AP 242 Edition 1as “International Standard” (2014)
• Preparation of STEP AP 242 Recommended Practicesfor CAD, e.g.: 3D PMI semantic, composite
• Finalization of PDM Implementer Forum White paper, focused in priority 1 in the development of recommended practices for AP 242 PDM XML BO model
• Preparation of AP 242 benchmark N°1, with the support of several organizations: ProSTEP iViP, AfNet, etc.
• Kickoff Confcall of STEP AP 242 ED2 project: 2nd Sept. 2014
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 29
Collaboration within Cabin – STEP AP 242 Cax IF testing
• Testing of STEP AP 242 interfaces by the Cax IFExample of Test Round 34J, for Apr. – Sept. 2014
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 30
Collaboration within Cabin – STEP AP242 benchmark
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 31
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 32
Collaboration within Cabin – JT Open TRB
• JT Supplier Collaboration White Paper
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 33
Agenda
• Company Overview• Airbus Toolset• Cabin Customization
• Airline• Design Agencies• Equipment Suppliers
• Airbus 3D Representation Formats• Collaboration within Cabin• ProSTEP iViP activities• STEP AP242• JT Open TRB• Summary/Conclusion
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 34
Collaboration with Cabin – Summary/Conclusion
• Independent of CAD tools (version, release etc.)• Reduce file sizes• Improve lead time• Usage of open international standards• Improve Quality e.g. by preventing conversions for
visualization by viewer
Global Product Data Interoperability Summit | 2014
BOEING is a trademark of Boeing Management CompanyCopyright © 2014 Boeing. All rights reserved.
Copyright © 2014 Northrop Grumman Corporation. All rights reserved.GPDIS_2014.ppt | 35
© Airbus Operations GmbH. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus Operations GmbH. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus Operations GmbH. This document and its content shall not be used for any purpose other than that for which it is supplied. The statements made herein do not constitute an offer. They are based on the mentioned assumptions and are expressed in good faith. Where the supporting grounds for these statements are not shown, Airbus Operations GmbH will be pleased to explain the basis thereof. AIRBUS, its logo, A300, A310, A318, A319, A320, A321, A330, A340, A350, A380, A400M are registered trademarks.
Bernd FeldvossService Package Manager PLM Data ExchangePhone: +49 40 743 78589Cell: +49 175 26 25 [email protected]