Download - Men's Trousers
-
Specifications and market analysis of
Mens trousers
By: Abhitosh Kumar Chaitanya Attuluri Haqiqat Ali Neeraj Kumar
Under the Guidance of Ms. Priyadarshini
-
Specification and specification sheet
A precise statement of a set of requirements to be
satisfied by a material, product, system or service.
Emphasize the key elements to be satisfied related to
quantity as well as quality .
Technically specific terms and numerical values with
measurement units corresponding to different
aspects of material are listed.
-
Types of specifications
On the basis of permission for changes in the
specifications
Open specification describes what is wanted but at
the same time leaves the field open to any supplier
who can meet the requirements specified.
Closed specification specifies the exact material
component or product by manufacturer or vendor
and includes style number ,trade names and other
specific identifiers.
-
Types of specifications
Target Functional Product Materials Process Inspection
On the basis of Manufacturing and quality aspects
Acceptance Installation Maintenance Disposal procurement
-
Potential problem areas related to specification Words
Incorrect usage
Non standard words
Incorrect text reference
Ambiguous technical words
Presentation
Poor visuals
Irrelevant examples
Untrue statements
Ideas
Confused statements
Multiple mix
specification system
Omissions
Contradictions
-
Market survey
Inorbit hitech city
Major brands for trousers:-
Indian terrain,
Code
Arrow
Van Heusens
Allen Solly
-
Material and trims specifications
Fabric: Fabric to be Battle
Rip 65% polyester and 35%
cotton Rip stop,
Weight: 6.5 oz /Sq Yd.
Construction: 105x48
Yarn Size: 20 RS X 12.50 OE
Tear: 9.5 x 120
Crocking Dry: 4.0
Crocking Wet: 3.0
Color fastness to Light: 4
Shrinkage: 2.5%
-
Pockets:
Two front slash pockets, two rear inset pockets covered
buttons.
Two Partial bellows pockets each let, with 3 pleat cargo
with finished eyelet drain foles and covered buttons with
fused button down flaps.
Seams:
Inseam, out-seam, and seat-seam must be two needle
felled construction.
All seam settings must be accomplished with no
puckering in the seam panel.
-
Leg Hem:
Leg hem drawstrings shall consist of 3/8 nulon
drawstrings (GST) fused and knotted ends, with sewn
eyelet exit holes will be cause for rejection.
Belt Loops:
Belt loops shall be of double fabric thickness, butted on
reverse side and blind stitched minimum of 7/16 wide
by minimum 2 long.
-
Size Label:
The size label is located in the waistband
near the centre back, sewn under the
waistband.
In addition the care label, located on the
right rear pocket bag with four sides sewn
down
must include laundering instructions
-
Measurement specification
Waist In 26 28 30 32 34
Cm 67 72 77 82 87
Pant Length In 28 28 29 30 31
(Inner Leg) Cm 70 72 75 76 78
Waist In 35 39 40 42 44
Cm 92 97 102 107 112
Pant Length In 31 32 33 34 35
(Inner Leg) Cm 80 82 84 85 87
-
Rise: the measurement from the top of the waistband,
down the front fly, ending at the crotch seam. Specs listed
below are measured on a size 32 trouser, these
measurements increase or decrease 1/8" per size.
Regular/Trim: 10 5/8". Regular/Full: 11 1/8".
Leg Opening: the measurement across the bottom of the
trouser. Specs listed below are measured on a size 32
trouser, these measurements increase or decrease 1/8" per
size. Regular/Trim: 8 3/4". Regular/Full: 9 1/4".
Fit Specifications
-
Each trouser shall be delivered separately in
clear plastic packaging and delivered in boxes
of 10 pieces.
Each box shall be clearly marked with the
barcode, the initials or name of the
manufacturer
and details of the contends-i.e. number of items
and sizes.
Packaging specifications
-
Comparison of brands
Code
Arrow
Van Heusen
Indian Terrain
-
Fabric: 8.5-ounce, 100 percent cotton canvas that is
ring spun, preshrunk, washed and has DuPont
Teflon coating.
Fit: Instead of adapting a pant for lean hikers, EOTAC's
tactical pants, are made for those with a more
muscular build. The pants are not pleated.
Crotch construction: The gusseted crotch relieves the
pressure zone and prevents blowouts.
Code
-
Waist style: EOTAC's waistband is nearly identical to
the typical elastic band on the market.
Reinforcements: There's a double layer of fabric over
the knees and an added liner in the utility pockets give
bonus support.
Fly type: A metal tack-button closure along with a
concealed YKK brass zipper.
Colors: Black, khaki, navy blue, OD green.
Price: $59.99 (MSRP) for sizes 28 to 44; $65.99 (MSRP)
for sizes 46 to 48.
-
Arrow Fabric: A 6.25 ounce, 60 percent cotton and 40
percent polyester ripstop blend.
Fit: The trousers have a mid-rise, straight fit that
leaves out front pleats found on other Propper
tactical pants. For a 34X32 pant, the front rise is
11.25 inches; the back rise is 15.75 inches. The leg
opening has a width of 8.5 inches.
Crotch construction: Just like Propper's original
tactical trouser, there is no crotch gusset.
-
Waist style: A 3-inch long internal elastic waistband
on each side allows flexibility and is far less
substantial than Propper's original pant band (7
inches long on each side). Six belt loops can
accommodate belts up to 1.75 inches wide.
Reinforcements: Reinforced knee patch.
Fly type: A plastic button with a YKK zipper and a
cloth zipper pull.
Colours: Black, khaki, LAPD navy, olive.
Price: $29.99 (MSRP)
-
Fabric: 7-ounce, 65 percent/35 percent poly-cotton ripstop
Fit: Van Hussain calls sizing more of an art than a science
and offers its pants in three sizesmedium (30-32), large
(34-36) and x-large (38-40). For a large pant, which is not
pleated, the front rise is 1 foot; the back rise is 18.25 inches
with a leg opening width of 9 inches.
Crotch construction: Even though the PNT X.A pants don't
have a gusseted crotch now, Cronin says he'll consider
adding one in the future. He feels that pants can have the
same effect without adding an entire piece of fabric.
Van Heusen
-
Waist style: This trouser uses a traditional cinch tab
buckle on the side that allows for adjustment on the
waist as needed. The pants also feature a contoured
waistband. Seven reinforced belt loops made out of PALS
webbing can handle belts up to 1.75 inches wide.
Reinforcements: Double reinforced articulated knees
with ripstop and 500 Denier Cordura, bar-tacked stress
points and reinforced seat. All seams use a bonded-69
nylon thread.
Fly type: Mil-Spec 27 Line (brass with black finish)
three-snap fly with a tack button closure.
-
Fabric: By applying an 8.5-ounce, 100 percent cotton canvas
to the pants with wrinkle and stain resistance treatment, this
trouser is geared toward a long wear cycle. The cotton canvas
pattern is weaved in both a horizontal and vertical direction.
Fit: Swift movements will seem effortless in this pleated pant
with a gusseted crotch and a tunneled waistband. For a
34X30 pant, the front rise is 11.25 inches; the back rise is
15.5 inches with a leg opening width of 8.5 inches.
Crotch construction: It has a gusseted crotch with an
elongated diamond pattern that allows more freedom of
movement.
Indian Terrain
-
Waist style: With a tuxedo-style, tunneled waistband, there
is the potential to expand the waist up to four inches. Six
extra-wide, reinforced belt loops encircle the waist region
and accommodate belts up to 1.75 inches wide.
Reinforcements: Double layering along the seat and knees
as well as along the cuffs and pockets gives extra protection
against wearing down.
Fly type: French fly with a Prym snap and an extra wide YKK
zipper.
Colors: Black, khaki, navy, olive drab.
Price: 1600
-
Understanding quality assurance chapter 3 understandnig standards and
specification http://www.foxsoccershop.com/size-chart.html http://www.shoplastyle.com/info/sizing.asp http://www.tradeindia.com/fp528959/Formals-Linen-Trousers-Packing.html http://tacticalpants.com/tactical-pants-guide
Bibliography
-
Thank You