Power
Photovoltaic
Table of Contents
WAGO Power 4 - 5
Connection Technology for Photovoltaic Modules 6 -7
DC Distributor Boxes/Activation Box/Diode Terminal Blocks 8 -9
Power Inverter 10-11
Measuring and Control Technology 12-13
Metrology 14-15
Monitoring 16-17
Product Info 1000 V 18-19
Product Overview 20-25
WAGO Product Information 26-27
4
Reliable and safe – with WAGO The main objective of the power genera-tion and distribution industry is to ensure the reliable and safe supply of power. In an era of increasing global competition, the financial benefits that components bring to a project dramatically impact decision-making. WAGO components provide the greatest degrees of safety and quality paired with industry-leading reli-ability. This creates a compelling argument that will win over even the most discerning decision-makers.
Our planet‘s resources are finite and climate change can no longer be denied. These facts pose a great challenge to any
WAGO-I/O-SYSTEM
JUMPFLEX® - Transducers/Relay and Optocoupler Modules
company producing goods. And these facts are pushing WAGO to continue lead-ing the industry:
We are advocates for material reduction, recycling, environmentally friendly produc-tion processes and utilization of energy-saving technologies. Sustainability is our binding obligation to future generations.
Reliability with CAGE CLAMP®
WAGO components equipped with CAGE CLAMP® Spring Pressure Connection Technology prove their value every day under the harshest conditions. Our plastics and materials, as well as reliable, safe and maintenance-free connection technology withstand severe environmental conditions to create a long service life. This ensures that your photovoltaic system will remain a long-term source of revenue.
WAGO-I/O-IPC
Industrial ECO Switch
Sunny Side Up WAGO Power
TO-PASS® Telecontrol Module and GPRS Modem
5
WAGO-I/O-SYSTEM
PCB Terminal Blocks and Connectors
Rail-Mounted Terminal Block System from 0.08–95mm2
(AWG 28–4/0)
6
260/261 Series
862 Series
235 Series
7
Maximum output, minimum spacePhotovoltaic connection boxes play an important role in solar-energy produc-tion systems. They house electrical con-nections between modules, and protect the cells against damage.
The most critical component of PV con-nection boxes is the connection technol-ogy that guarantees secure contact between the strings and PV connection lines. Connection technology is largely responsible for both system efficiency and an extended life span.
* PV = photovoltaic
Connect to the SunConnection Technology for Photovoltaic Modules
Not surprisingly, PV systems are prone to dramatic temperature and humidity fluctuations triggered by harsh outdoor environments. In spite of this, PV systems are expected to have an extended service life. WAGO connection modules have been doing justice to these requirements for many years. In addition to a secure string connection, they are beneficial thanks to their:
•especially flat design•wide temperature range from
- 60°C to +105°C(for a short time also up to 200°C)
•modular construction•extensive circuit board module pro-
gram up to 16 mm²/AWG 6•custom-engineered solutions.
Solarmodule
DC-Trennschalter
Wechselrichter
8
DC isolators, activation boxes and distributor boxes perform critical func-tions between the PV modules and the inverters:
•Isolation equipment•PV collection box•Reliable connection between modules
and invertersThe versatile WAGO rail-mounted termi-nal block system offers many possibilities for connecting the PV lines reliably and permanently. Intelligent jumper systems simplify the interconnection of the PV lines. Disconnect and fuse terminal blocks with high voltage resistance securely isolate PV generators from inverters. Custom-engineered solutions, such as diode boxes (up to 1,000 VDC), complete the system.
Connect with FunctionDC Isolators, Diode Box, Distributor Box
The range of rail-mounted terminal blocks – simply brilliant With just one rail-mounted terminal block system, WAGO fulfills virtually all industrial, Ex application and building installation needs. Thanks to CAGE CLAMP® S technology, TOPJOB® S DIN-rail mount terminal blocks are the industry’s most compact. This means more wiring space and smaller switch cabinets and junction boxes.
•CAGE CLAMP® S connection for allconductor types – simply push in solidand fine-stranded, ferruled conductors
•Extremely compact design for morewiring space or smaller switch cabi-nets/terminal boxes
•Robust, spring-loaded jumper systemfor full nominal current
•Highly reliable terminations•Fast and economical marking system•Ex approvals are standard•POWER CAGE CLAMP rail-mounted
terminal blocks with spring clamp tech-nology are suited for conductors up to95 mm² (AWG 4/0).
•For applications with higher voltage re-quirements up to 1500 VDC, with thenew TOPJOB® S 2006 Series discon-nect terminal block, we offer preciselythe right solution!
When unreliable would be inexcusableTemperature fluctuations, vibrations and environmental aggressors mean screw connections must be checked and adjusted frequently. This is where CAGE CLAMP® S excels. In addition to minimiz-ing wiring and installation times, all terminations are permanently gas-tight, maintenance-free and vibration-resistant.
Solar modules
DC isolator
Power inverter
9
Connect with FunctionDC Isolators, Diode Box, Distributor Box
*
* Please heed touch-proof guard!(see page 23)
2006 Series
2006 Series
2006 Series
745 Series
10
285 Series High-Current, Rail-Mounted Terminal Blocks
745 Series
828 Series
831 Series
picoMAX®
2716 Series
11
At the heart of every PV system lies a power inverter. The connection technol-ogy of WAGO PCB terminal blocks, connectors, as well as feedthrough and rail-mounted terminal blocks, reliably interfaces a power inverter’s delicate electronics with the harsh outside world.
The 285 Series POWER CAGE CLAMP terminal blocks, with a connection range of 35 to 95 mm² (AWG 32–4/0) are ideal when focusing on greater outputs, such as central inverters.
WAGO‘s extensive PCB terminal block system includes cross-sectional areas up to 16 mm² (6 AWG) and improves power inverter performance though:
•User-friendly designs of the 2176and 745 Series PCB terminal blocks.Thanks to the lever of the 2716 Series,several clamping points can be heldopen at once, dramatically simplifyingmulti-conductor terminations (up to1000 V/76 A).
•828 Series feedthrough terminalblocks fulfill special requirements.Easy to handle, simple to use, thesecomponents streamline projects for theend customer.
•High-current connectors in the 831Series are designed for rated currentsup to 41 A. Connects conductors from0.5 to 10 mm² (AWG 20-8).
Reliable Connections at the CenterPower Inverter
12
WAGO-I/O-SYSTEM 750 Series
713
Control, data logger, solar tracking systemsWith a fieldbus-independent design that features fine granular and modular com-ponents, the WAGO-I/O-SYSTEM read-ily meets all the requirements placed on distributed fieldbus systems. It is also certified by prominent certification agencies for worldwide use in extremely diverse applications such as:
•Monitoring large PV systems•Control of PV tracking systems•Incorporation of current sensors•Access via Web-Visu•Data Logging
Reach for the SunWAGO-I/O-SYSTEM
The most compact, modular and fieldbus-independent I/O system for decentralized automationOptimized for process-oriented com-munication, the WAGO-I/O-SYSTEM offers scalable performance and high integration density with an unbeatable price/performance ratio.
It persuades with many advantages:•Modular construction: Digital, analog
and specialty modules can be com-bined in virtually any manner within anode. Outputs of different capacitiesup to 230 V.
•Freely programmable according toIEC 61131-3.
• Supports all common fieldbus systems,such as:- PROFIBUS, PROFINET, ETHERNET etc.- Telecontrol protocols IEC 60870,61850, 61400
•Radio technology
14
Exact measurement values for the control centerSystem monitoring requires line current or total current measurement. WAGO‘s Cur-rent Sensor distinguishes itself through its high EMC immunity. It measures currents reliably up to 140 A and makes mea-surement values available via MODBUS standard protocol to superior controls, visualizations or control centers.
•Up to 32 sensors can be sequen-tially connected per RS-485 line andexpanded to a maximum bus cablelength of 1,200 m.
•With a measurement precision of 0.5%of the end value, the measurementrange of 0–80 A and 0–140 A (DC)ensures reliable phase monitoring.
•Ambient temperatures from -20°C to+70°C are no problem.
MODBUS
How Bright is the Sun Light?Monitoring Photovoltaic Systems
15
789-620 Current Sensor
16
Renewable Energy Production Plants
Control and monitoring via WAGO-I/O-SYSTEM per Renewable Energy Sources Act (EEG)
A large challenge for the network inte-gration of renewable power producers is maintaining of reliable voltage quality in the distribution network.
According to the German Renewable Energy Sources Act (EEG), all power plants with a capacity of more than 100 kW must have a device for remote-controlled reduction of the feed-in power. This provision should ensure that while the greatest possible quantity is drawn by network operators from EEG and CHP* systems, network safety is also guaranteed.
Network monitoring is handled by a network control system. Power regula-tion typically occurs by reductions in four steps: 90%, 60%, 30%, and 0%. The compact WAGO-I/O-SYSTEM is ideal for this application. Minimally equipped with four digital outputs, this results in a very small, economical unit for power reduction. The flexible I/O system additionally offers the possibility of gradually balancing the power via analog outputs.
Thanks to WAGO’s intelligent 750 au-tomation system, in addition to power reduction, decentralized power supply systems can be monitored.
Our Solution: •WAGO-I/O-SYSTEM,
750-872 PLC for telecontrol technology •Compact and flexible system•Expands for exact power control via
optional analog output cards•Integrated IEC protocols•Economical solution
*CHP = Combined Heat and Power
Power Reduction and Monitoring
17
Communication via
•IEC 60870-5-101/-104
•IEC 61850
•IEC 61850-7-420
•IEC 61400-25Biogas
Solar plant
Control center
Wind farm
18
1000V Potential Block for Photovoltaic SystemsTOPJOB® S Rail-Mounted Terminal Blocks up to 1000V in Generator Connection Boxes
Task: Generator connection and line collec-tor boxes require rail-mounted terminal blocks rated at 1,000 VDC.
Due to their clearances and creepage distances, WAGO’s TOPJOB® S rail-mounted terminal blocks (2006, 2010, and 2016 Series) are rated at 800 V, allowing operation in pollution degree 3 environments.
The clearances and creepage distances refer to: 1. Potential to potential 12. Potential to carrier rail 2.
19
1000V Potential Block for Photovoltaic SystemsTOPJOB® S Rail-Mounted Terminal Blocks up to 1000V in Generator Connection Boxes
Requirements for 1,000 V:By commoning individual terminal blocks, it is possible to achieve a com-mon potential 3.
This eliminates potential-to-potential clearances and creepage distances.
The remaining clearances and creepage distances from potential to carrier rail are sufficient for 1,000 V applications.
Blocks with differing potentials (+, –) mounted next to each other on a car-rier rail are separated by an end stop that is at least 6mm wide.
20
WAGO Productsfor Photovoltaic SystemsProducts “ELECTRICAL INTERCONNECTIONS”
Description Series Name Item No. Technical Data Comments Catalog Reference
Through terminal block,gray
TOPJOB® Classic 782-601 0.2 – 6 mm2
1000 V / 8 kV / 3600 V, 30 A UIN 41 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.297
Through terminal block,blue
TOPJOB® Classic 782-604 0.2 – 6 mm2
1000 V / 8 kV / 3600 V, 30 A UIN 41 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.297
Ground conductor terminal block,green-yellow
TOPJOB® Classic 782-607 0.2 – 6 mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.297
Through terminal block,gray
TOPJOB® Classic 784-601 0.2 – 10 (16) mm2
1000 V / 8 kV / 3600 V, 50 A UIN 57 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.297
Through terminal block,blue
TOPJOB® Classic 784-604 0.2 – 10 (16) mm2
1000 V / 8 kV / 3600 V, 50 A UIN 57 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.297
Ground conductor terminal block,green-yellow
TOPJOB® Classic 784-607 0.2 – 10 (16) mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.297
Through terminal block,gray
TOPJOB® Classic 783-601 0.2 – 16 mm2
1000 V / 8 kV / 3600 V, 65 A UIN 76 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.298
Through terminal block,blue
TOPJOB® Classic 783-604 0.2 – 16 mm2
1000 V / 8 kV / 3600 V, 65 A UIN 76 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.298
Ground conductor terminal block,green-yellow
TOPJOB® Classic 783-607 0.2 – 16 mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 5.298
Through terminal block,gray
TOPJOB® S 2006-1201 0.5 – 6 (10) mm2
800 V / 8 kV / 3600 V, 50 A UIN 41 A (57 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.64
Through terminal block,blue
TOPJOB® S 2006-1204 0.5 – 6 (10) mm2
800 V / 8 kV / 3600 V, 50 A UIN 41 A (57 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.64
21
Description Series Name Item No. Technical Data Comments Catalog Reference
Ground conductor terminal block,green-yellow
TOPJOB® S 2006-1207 0.5 – 6 (10) mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.64
Through terminal block,gray
TOPJOB® S 2006-1301 0.5 – 6 (10) mm2
800 V / 8 kV / 3600 V, 50 A UIN 41 A (57 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.64
Through terminal block,blue
TOPJOB® S 2006-1304 0.5 – 6 (10) mm2
800 V / 8 kV / 3600 V, 50 A UIN 41 A (57 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.64
Ground conductor terminal block,green-yellow
TOPJOB® S 2006-1307 0.5 – 6 (10) mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.64
Through terminal block,gray
TOPJOB® S 2010-1201 0.5 – 10 (16) mm2
800 V / 8 kV / 3600 V, 65 A UIN 57 A (76 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.65
Through terminal block,blue
TOPJOB® S 2010-1204 0.5 – 10 (16) mm2
800 V / 8 kV / 3600 V, 65 A UIN 57 A (76 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.65
Ground conductor terminal block,green-yellow
TOPJOB® S 2010-1207 0.5 – 10 (16) mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.65
Through terminal block,gray
TOPJOB® S 2010-1301 0.5 – 10 (16) mm2
800 V / 8 kV / 3600 V, 65 A UIN 57 A (76 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.65
Through terminal block,blue
TOPJOB® S 2010-1304 0.5 – 10 (16) mm2
800 V / 8 kV / 3600 V, 65 A UIN 57 A (76 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.65
Ground conductor terminal block,green-yellow
TOPJOB® S 2010-1307 0.5 – 10 (16) mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.65
Through terminal block,gray
TOPJOB® S 2016-1201 0.5 – 16 (25 “f-st”) mm2
800 V / 8 kV / 3600 V, 85 A UIN 76 A (90 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.66
Through terminal block,blue
TOPJOB® S 2016-1204 0.5 – 16 (25 “f-st”)mm2
800 V / 8 kV / 3600 V, 85 A UIN 76 A (90 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.66
22
Products “ELECTRICAL INTERCONNECTIONS”Description Series Name Item No. Technical Data Comments Catalog Reference
Ground conductor terminal block,green-yellow
TOPJOB® S 2016-1207 0.5 – 16 (25 “f-st”) mm2
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.66
Through terminal block,gray
TOPJOB® S 2016-1301 0.5 – 16 (25 “f-st”) mm2
800 V / 8 kV / 3600 V, 85 A UIN 76 A (90 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.66
Through terminal block,blue
TOPJOB® S 2016-1304 0.5 – 16 (25 “f-st”) mm2
800 V / 8 kV / 3600 V, 85 A UIN 76 A (90 A)
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.66
Ground conductor terminal block,green-yellow
TOPJOB®S 2016-1307 0.5 – 16 (25 “f-st”) mm2
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.66
Through terminal block,
TOPJOB®S 2006-1601 gray2006-1604 blue
0.5 – 6 (10) mm2
800 V / 6 kV / 3IN 30 A
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.108
Disconnect terminal block
TOPJOB®S 2006-1671 gray2006-1674 blue
0.5 – 6 (10) mm2
800 V / 6 kV / 3IN 30 A
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 1.108
Diode terminal block TOPJOB® S 2006-0001/K999-9999/0000-0100
0.5 – 6 (10) mm2
1000 VDC Peak reverse voltage
5 A
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
Diode terminal block TOPJOB® S 2006-0001/K999-9999/0000-0300
0.5 – 6 (10) mm2
1000 VDCPeak reverse voltage
5 A
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
Diode terminal block TOPJOB® S 2006-0001/K999-9999/0000-0400
0.5 – 6 (10) mm2
1000 VDCPeak reverse voltage
5 A
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
Diode terminal block TOPJOB® S 2006-0001/K999-9999/0000-0600
0.5 – 6 (10) mm2
1600 VDCPeak reverse voltage
3 A
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
Diode terminal block TOPJOB® S 2006-0001/K999-9999/0000-0700
0.5 – 6 (10) mm2
1600 VDCPeak reverse voltage
3 A
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
Diode terminal block TOPJOB® S 2006-0001/K999-9999/0000-1000
0.5 – 6 (10) mm2
2000 VDCPeak reverse voltage
3 A
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
23
Description Series Name Item No. Technical Data Comments Catalog Reference
Open diode gate with 4 diodes
288-142 0.2 – 6 mm2
1200 VDCPeak reverse voltage
8 A per diode
IP00*Touch-proof protec-tion is to be ensured by the system installer, e.g. with a WAGO 709 Series Cover
Data sheet
* Cover, type 2 709-154 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 13.574
* Cover carrier, type 2 709-168 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 13.574
High-current through terminal block,gray
POWERCAGE CLAMP®
285-135 6 – 35 mm2
1000 V / 8 kV / 3600 V, 115 A UIN 125 A
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 10.462
High-current through terminal block,blue
POWERCAGE CLAMP®
285-134 6 – 35 mm2
1000 V / 8 kV / 3600 V, 115 A UIN 125 A
1000 VDCsee page18-19
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 10.462
High-current ground conductor terminal block,green-yellow
POWERCAGE CLAMP®
285-137 6 – 35 mm2 Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 10.462
Disconnect/test terminal block
Rail-mounted termi-nal blocks forfront-entry wiring
282-860 0.2 – 6 mm2
500 V / 6 kV / 3600 V, 30 A UIN 30 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 3.214
Disconnect terminal block
Rail-mounted termi-nal blocks forfront-entry wiring
282-821 0.2 – 6 mm2
500 V / 6 kV / 3600 V, 30 A UIN 30 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 3.218
Feedthrough terminal block
Feedthrough termi-nal blocks
828-334 1.5 – 16 mm2
1000 V / 8 kV / 3600 V, 30 AIN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 2.209
Modular Terminal Blocks and Terminal Strips
PCB terminal blocks 235-4xx 0.5 – 2.5 mm2 “e”320 V / 4 kV / 2300 V, 10 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.153 f
PCB terminal strips with operating levers
PCB terminal blocks 2706-1xx 0.5 – 6 mm2
630 V / 6 kV / 2IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.107
PCB terminal strips with operating leversand jumper slots
PCB terminal blocks 2706-2xx2706-3xx
0.5 – 6 mm2
1000 V / 8 kV / 2IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.107
24
Products “ELECTRICAL INTERCONNECTIONS”Description Series Name Item No. Technical Data Comments Catalog Reference
PCB terminal strips with operating leversand jumpering shafts
PCB terminal blocks2706-15x2706-25x
0.5 – 6 mm2
630 V / 6 kV / 21000 V / 8 kV / 2IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.109
PCB terminal strips with operating levers
PCB terminal blocks 2716-10xx 1.5 – 16 mm2
320 V / 4 kV / 2150 V, 55 A UIN 76 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.111
PCB terminal strips with operating levers
PCB terminal blocks 2716-20x 1.5 – 16 mm2
1000 V / 8 kV / 2600 V, 65 A UIN 76 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.111
PCB terminal strips with operating levers and jumpering shafts
PCB terminal blocks 2716-15xx 1.5 – 16 mm2
320 V / 4 kV / 2150 V, 55 A UIN 76 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.113
PCB terminal strips with operating leversand jumpering shafts
PCB terminal blocks 2716-25x 1.5 – 16 mm2
1000 V / 4 kV / 2600 V, 65 A UIN 76 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 1.113
Female connectorsMCS-MAXI
Connectors and headers
831-31xx 0.5 – 10 mm2
1000 V / 8 kV / 2600 V, 42 A IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 7.493
Male connectorsMCS-MAXI
Connectors and headers
831-32xx 0.5 – 10 mm2
1000 V / 8 kV / 2600 V, 42 A IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 7.497
Male connectorsMCS-MAXIwith integrated mount-ing adapter for TS 35
Connectors and headers
831-32xx 0.5 – 10 mm2
1000 V / 8 kV / 2600 V, 42 AIN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 7.497
Male connectorsMCS-MAXIwith straight solder pins
Connectors and headers
831-36xx 630 V / 6 kV / 2300 V, 42 A IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 7.495
Male connectorsMCS-MAXIwith angled solder pins
Connectors and headers
831-36xx 630 V / 6 kV / 2300 V, 42 A IN 41 A
Full Line Catalog2012/2013 Connectors and PCB Terminal Blocks,Volume 2, page 7.495
4-conductor, chassis-mount terminal strips, 2-pole – 5-pole
Chassis-mount terminal strips
862-xxxx 0.5 – 4 mm2
500 V / 6 kV / 3300 V, 20 A UIN 32 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, pages 2.152 – 2.155
2- and 4-conductor terminal strips with fastening flanges,2- to 12-pole
Terminal strips
262-1xx262-2xx
0.08 – 4 mm2
630 V / 8 kV / 3300 V, 20 A UIN 24 AIN 32 A
Full Line Catalog 2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 9.453
25
Description Series Name Item No. Technical Data Comments Catalog Reference
Current sensorwith bus connection in DIN-rail mountable enclosure
Interface module 789-620 DC 0 ... 80 A12 V ... 34 VMODBUS slave RS-485IP20
–20 °C ... +70 °C
Full Line Catalog2012, INTERFACE ELECTRONIC, Volume 4,page 1.164
Current sensorwith bus connection in DIN-rail mountable enclosure
Interface module 789-621 DC 0 ... 140 A12 V ... 34 VMODBUS slave RS-485IP20
–20 °C ... +70 °C
Full Line Catalog2012, INTERFACE ELECTRONIC, Volume 4,page 1.166
Fieldbus couplers/controllers and I/O modules
WAGO-I/O-SYSTEM750
750-xxx > 400 I/O module,Programmable via CoDeSys to IEC 61131, IP20
Default0°C .....+55 °CExpanded:–20 °C ... +60 °C
Full line catalog 2012/2013, AUTOMATION, Volume 3
Fieldbus couplers/programmable fieldbus couplers and I/O modules
WAGO- SPEEDWAY 767
767-xxx > 25 I/O module,Programmable via CoD-eSys 3 to IEC 61131, configurable via FDT/DTM, IP67
–25 °C ... +60 °C
Full line catalog 2012/2013, AUTOMATION, Volume 3
Telecontrol modules TO-PASS® 761-11x761-21x
Compact telecontrol modules 8 AI, 8 DI, 2 AO, 4 DO, GSM/GPRS/SMS, DC 10-36 V
–20 °C ... +70 °C
Full line catalog 2012/2013, AUTOMATION, Volume 3
Telecontroller WAGO-I/O-SYSTEM
750-872 Programmable control-ler IEC 60 870-101/104 IEC 61850 IEC 61400-25
Telecontrol protocol
Full line catalog 2012/2013, AUTOMATION, Volume 3,page 1.82
Web portal TO-PASS® 761-700 Internet visualization with measurement value history andalarm management
Full line catalog 2012/2013, AUTOMATION, Volume 3, page 8.545
Switch Industrial switches 852-xxx Full line catalog 2012/2013, AUTOMATION, Volume 3, page 9.554 f
Power Supplies EPSITRON® 787-xxx Network devices, buffer and redundancy modules, USP, electronic circuit breakers
–10 °C ... +70 °C
Full Line Catalog2012, INTERFACE ELECTRONIC, Volume 4, page 4.284 f
Products “AUTOMATION”
AccessoriesDescription Series Name Item No. Technical data: Comments Catalog Reference
2-pole voltage tester,Profi-LCD+Profi-LED+
206-807206-806
Measuring range: AC/DC6 V ... 1000 V,Degree of protection: IP65Resistance measuring:up to 2000 Ω
LCD or LED dis-play, removable test tips Ø 4 mm
Full Line Catalog2012/2013, Rail-Mounted Terminal Block Systems, Volume 1, page 13.586
26
WAGO Product InformationAll WAGO products featured in this brochure are in the following WAGO Full Line Catalogs:
• Rail-MountedTerminalBlocks• ModularPluggable Connectors (X-COM®-SYSTEM and X-COM®S-SYSTEM)• PatchboardSystems• TerminalStrips• PUSH WIRE® Connectors for Junction Boxes• LightingConnectors• Shield(Screen)ConnectingSystem
• PCBTerminalBlocks• FeedthroughTerminalBlocks• MULTI CONNECTION SYSTEM• Pluggable PCB Terminal Blocks• SpecialtyConnectors
• Relays–Optocouplers–SpecialtyFunctions• InterfaceModules• Transducers• Power Supplies• OvervoltageProtection• RadioTechnology• EmptyHousingsandDIN-RailMountingCarriers
• ModularI/O-SYSTEMIP20• RadioTechnology,TO-PASS® Telecontrol Technology• IndustrialSwitches,PERSPECTO®
• IP67ModularI/O-SYSTEM,IP67BlockI/O-SYSTEM• IP67Sensor/ActuatorBoxes,IP67CablesandConnectors• Power Supplies
• WINSTA® MINI – Pluggable Connectors• WINSTA® MINI special – Pluggable Connectors• WINSTA® MIDI – Pluggable Connectors• WINSTA® MIDI special – Pluggable Connectors• WINSTA® MAXI – Pluggable Connectors• WINSTA® RD – Cable Assemblies• WINSTA® KNX – Pluggable Connectors• WINSTA® IDC – Flat Cable Systems
Volume 1, Rail-Mounted Terminal Block Systems
Volume 2, Connectors and PCB Terminal Blocks
Volume 3, AUTOMATION
Volume 5, WINSTA® – The Pluggable Connection System
Volume 4, INTERFACE ELECTRONIC
Fotos: S.1 - Arnim Schindler, S. 10 Regine Schöttl, aboutpixel.de
27
For a quick product overview, please use the Internet industry portal or the online catalog.
Learn more!
www.wago.com
0888
-019
1/01
01-6
901
· Pho
tovo
ltaic
1.0
US
08/2
012-
00 ·
Prin
ted
in G
erm
any
JA ·
Subj
ect t
o de
sign
chan
ges
WAGO Kontakttechnik GmbH & Co. KGPostfach 2880 · 32385 MindenHansastraße 27 · 32423 MindenPhone:Headquarters +49 (0)571/887 - 0Sales +49 (0)571/887 - 222Order Service +49 (0)571/887 - 333Technical Support +49 (0)571/887 - 555Fax: +49 (0)571/887 - 169E-mail: [email protected]: www.wago.com