Download - Product catalogue ECCO Products (EN)
INNOVATIVEOUTDOOR
SOLUTIONS
ECCO products
is a Belgian developer and manufacturer of innovative
and user-friendly products with high added value for
both the private and public sectors, and wishes to be a
trendsetter at the European level.
ECCOproducts constantly analyses the market and is
always furthering its development of intelligent prod-
ucts.
We keep the entire process flow in-house (from de-
velopment to sales) and can therefore apply stringent
quality parameters ourselves.
For the distribution of our products, we rely on a se-
lective network of dealers that market our products all
over Europe. This commercial network is supported by
strong and innovative marketing tools.
/ 05 - 08 /
/ 09 - 12 /
/ 13 - 22 /
/ 23 - 26 /
INSTALLATION
1 Surface layer
The honeycomb structure should be just covered with gravel (size 4-16 mm).
For finer gravels this will be approximately 1 cm, for coarser gravels 2 cm.
ECCOGRAVEL (1/4) / 04 /
THE STRONG GRAVEL GRID
3. Levelling layer (5 cm)
APPLICATIONS WITHOUT CARS
2. Gravel sheet ECCOgravel® 2. Gravel sheet ECCOgravel®
4. Sub-base (25 cm)
1. Surface layer (gravel) 1 cm
ECCOgravel
Always work with a well-constructed sub-base
3. Levelling layer (max. 15 cm)
APPLICATIONS WITH CARS
ECCOgravelUNIQUE SELLING POINTS
+ Sheet in HDPE: high compressive strength, high impact value and frost resistant. Increased resistance against torsional loads due to plastic reinforcements between the cells.
+ Increased resistance against torsional loads due to additional plastic reinforcements between the cells
+ Polyester geotextile: very strong, does not rot and there is no risk of silting up due to the open structure
+ Very easy to use: can be transported easily and fast thanks to pliable size
+ Perfectly walkable and ridable
1. Surface layer (gravel) 1 to 2 cm
2 Honeycomb grid
A thicker grid offers a better distribution across the substrate.
3 Levelling layer
The levelling layer can consist of: • sieved sand
• limestone or porphyry 2-4 mm, 1-3 mm, 0-4 mm
4 Sub-base
Limestone rubble, porphyry rubble or broken concrete rubble (0-32 mm or 0-40 mm). We do not recommend brick rubble, as this is ultimately pulverised.
/ 05 / ECCOGRAVEL (2/4)
ECCOGRAVEL DOUBLEECCOGRAVEL DOUBLE
10 mm
30 mm
10 mm
40 mm
DIMENSIONS
Height Dimensions m²/grid Gravel/m²4 cm 160 x 120 cm 1.92 +/- 80 kg
3 cm 160 x 120 cm 1.92 +/- 65 kg
APPLICATIONS
• Driveways
• Parking areas
• Garden paths
• Terraces
• Footpaths
ECCOGRAVEL (3/4) / 06 /
APPLICATIONS
• Driveways
• Parking areas
• Garden paths
• Terraces
• Footpaths
ACCESSORIES/MISCELLANEA
ECCOgravel is also available in black.
+ Ideal for using darker coloured gravel types,
+ Such as basalt.
PARKING PLACE MARKER
The ideal solution for demarcating your parking place. Available in white or black. Diameter: ø 85 mm
/ 07 / ECCOGRAVEL (4/4)
UNIQUE SELLING POINTS
+ Easy to use
+ Fast and easy installation
+ Flexible: right angles and wavy forms are possible
+ Low maintenance
DIMENSIONS
l x w x h (in cm)Galvanised: 240 x 0.12 x 8Corten: 240 x 0.15 x 8Height of pickets: 43 cm
1 // Basic: simple, economic borders
80 cm
8 cm
43 cm
APPLICATIONS
• Paved surfaces
• Terrace
• Flowerbed
ECCO BORDERS (1/4) / 08 /
HIGH-QUALITY BORDERS
+ Doubled-up top edge for maximum safety
+ Produced with high-quality materials
+ Available in 2 versions: Galvanised steel 1.2 mm and Corten steel 1.5 mm
• Lawn
• Vegetable garden
Border of:
distance between metal pickets
6
5
4
3
2
INSTALLATION
The basic borders are designed to provide a beauti-
ful finish to garden paths, terraces, flowerbeds and
lawns in a simple, fast and aesthetic manner. They
are characterised by flexibility.
Basic borders are both flexible and firm; they can
be bent into 90° corners as well as wavy forms.
They are available in Corten steel and galvanised
steel.
Marking the section
Hammer pickets into the ground
Tap headpiece unto the picket
Attach border to headpiece using 2 self-drilling
screws
Interlink borders using the supplied nuts and
bolts
Repeat steps 2 through 5
43 cm
/ 9 / ECCO BORDERS (2/4)
1
2
3
4
5
6
1
2 // Delta: sleek, high-quality borders with a solid base
UNIQUE SELLING POINTS
+ Solid concrete base that ensures sleekly shaped borders
+ Long lifespan
+ Low maintenance
+ Convenient installation
+ Lots of possibilities for combinations
+ Available in 2 versions: Stainless steel and Corten steel
+ Available in 2 thicknesses: 20 mm and 50 mm
ECCO BORDERS (3/4) / 10 /
DIMENSIONS APPLICATIONS
20 mm width
Suitable for all areas on which no driving takes place, such as:
• Garden path borders
• Pond edges
• Terrace borders
• Flower bed and lawn borders
50 mm width
Suitable for all areas, including ones on which driving takes place, such as:
• Driveway borders
• Parking area borders
• Access road borders
L X W X H DELTA CORTEN DELTA INOXTotal dimensions (including concrete): Dimensions steel:
1250 X 20 X 145 mm1250 X 20 X 25 mm
1250 X 20 X 145 mm1250 X 20 X 30 mm
Total dimensions (including concrete):Dimensions steel:
1250 X 50 X 145 mm1250 X 50 X 25 mm
1250 X 50 X 145 mm1250 X 50 X 30 mm
/ 11 / ECCO BORDERS (4/4)
UNIQUE SELLING POINTS
+ Professional "all-in-one" construction kit
+ Matching Kit Bags available
+ Easy assembly thanks to enclosed layout plan + installation video
+ Easy to customise
+ Little loss of space due to narrow width
+ Suspended installation possible
+ Subtle transition between gabions
+ Avaialble in 4 heights
+ All nuts and bolts included.
+ Additional reinforcements for maximum safety
1 // ECCOfence KIT: a professional construction kit
ECCOFENCE (1/6) / 12 /
EXCLUSIVE GABIONS
ACCESSORIES/OPTIONAL COMPONENTS
2
1
3
2
1
/ 13 / ECCOFENCE (2/6)
ACCESSORIES/OPTIONAL COMPONENTS
Base 90°:
to create corners using the ECCOfence KIT.
Raising supports:
especially designed to compensate for 5% differences in heights with the ECCOfence
KIT system, such as in the case of an inclined driveway.
Side for aesthetic finish:
for each height, a finishing piece is optionally available. This may be used, for example,
to finish the wall at any KIT height in a way that leaves the stones visible on the side.
3
APPLICATIONS
• Barriers
• Terraces
• Retaining walls
• Publicity
• Partition wall
INSTALLATION
Base
Option 1: Installation on a concrete ring beam measuring 50 cm in width and at least 30 cm in depth (350 kg cement/m³ ). The poured concrete is always cast on the load-bearing substrate.
Option 2: Placement on plinths that are poured on the spot using poured concrete. Dimensions plinth: 50 x 50 x 50 cmDepth: from load-bearing substrate
Option 3: Using ECCO prefab supports.
50 cm
60 x 60 cm
40 x 40 cm
ECCOFENCE (3/6) / 14 /
Installation video
Use this link
to watch the
correct way of
installing the
ECCOfence kit:
DIMENSIONS
ECCOfence KIT 50:With a total height of 50 cm (in-cluding 9-cm suspended part)
ECCOfence KIT 100:with a total height of 100 cm(including 9-cm suspended part)
ECCOfence KIT 150:with a total height of 150 cm (in-cluding 9-cm suspended part)
ECCOfence KIT 200:with a total height of 200 cm (in-cluding 9-cm suspended part)
The ECCOfence KIT is standard 201 cm long and 20 cm wide, various heights are available:
KIT 200
KIT 150
KIT 100
KIT 50
200 cm
150 cm
100 cm
50 cm
1
3
2
4
/ 15 / ECCOFENCE (4/6)
3
2
1
4
The above photo depicts installation using optional finishing mesh. The standard ECCOfence KIT includes two galvanised, full grids.
3 // ECCOfence ALUBOX: trendy aluminium gabion
UNIQUE SELLING POINTS
+ Professional construction kit
+ On-site assembly and filling possible
+ Easy assembly
+ Easy to customise
+ Little loss of space due to narrow width
+ Design look thanks to aluminium
+ Choice between different finishes
+ Multiple applications: benches, partitions,...
APPLICATIONS
• Barriers
• Terraces
• Publicity
• Partition wall
• Garden bench/garden table (due to aluminium surface profile)
ECCOFENCE (5/6) / 16 /
DIMENSIONS
ECCOfence Alubox is the most narrow gabion in our range. The Alubox is only 16.5 cm wide. As a result, there is virtually no loss of space, while it is still very solid thanks to the concrete anchor. In addition, you will need less filling, which will reduce the costs.
Alubox 190201 x 16.5 x 190
Alubox 140201 x 16.5 x 140
Alubox 90201 x 16.5 x 90
Alubox 40201 x 16.5 x 40
/ 17 / ECCOFENCE (6/6)
BaseOption 1: Installation on a concrete ring beam measuring 50 cm in width and at least 30 cm in depth (at least 350 kg cement/m³ ). The poured concrete is always cast on the load-bearing substrate.
Option 2: Placement on plinths that are poured on the spot using poured concrete. Dimensions plinth: 50 x 50 x 50 cm. Depth: from load-bearing substrate
Option 3: Using the ground anchor. The ground anchor was specifically developed for the Alubox. It consists of four large bolts with fitting plates. This ground anchor is placed on the load-bearing substrate. The ground anchor is secured using quick-drying concrete (curing time is only 2 hours). The advantage of this system is that the Alubox can still be adjusted so that it is properly level.
UNIQUE SELLING POINTS
1 General advantages of a green roof
+ You create a patch of green in the middle of the city where nature can flourish fully
+ A green roof increases the thermal and acoustic insulation value of your house
+ Your roofing has a longer life span as the plants provide protection against UV radiation and fluctuations in temperature
+ Green roofs retain rainwater and ensure that it is slowly drained. In this way, there is less load on the sewer system and flooding is pre-vented.
+ Green roofs capture all kinds of dust parti-cles from the atmosphere and form a buffer against air pollution, as it were
ECCOSEDUM (1/4) / 18 /
READY-FOR-USE GREEN ROOF TILES
2 ready-for-use green roof tiles
+ Easy handling: the tiles only weigh between 8 and 12.5 kg/m²
+ Low weight per m²: between 30 and 55 kg/m². As a result, the ECCOsedum system can be placed on virtually any roof
+ ECCOsedum can be installed throughout the year (in contrast to on-the-spot vegetation, in which case installation should be avoided in winter and summer)
+ Easily removable if necessary, for example in case of water infiltration or roof maintenance
Of course, a green roof also provides a very nice view!
/ 19 / ECCOSEDUM (2/4)
Installation
1. Proper roof waterproofing is assumed.
2. Install a root-resistant layer. If necessary, apply 10-cm overlaps and tape the seam shut.
3. Install a protective layer, ensuring 10-cm overlaps.
4. Lock the ECCOsedum tiles together.
5. Finish the edges with roof gravel (= vegetation-free zone) or cut the tiles to size
ECCOSEDUM (3/4) / 20 /
Drainage layerThe drainage allows excess precipitation to be drained away on top of the roof membrane, without hindering catchment.
/ 21 / ECCOSEDUM (4/4)
DIMENSIONS / DETAILS
Vegetation layerThe ECCOsedum system makes use of no less than 7 types of sedum which are fully rooted (not giving weeds a chance).
Substrate layerThe substrate layer provides nourishment and water to the veg-etation, supplies oxygen and ensures anchoring of the roots
Filtering layerThis layer prevents washing away of the substrate. A non-wo-ven, 150-g/m² polypropylene cloth obstructs the fine particles from the substrate.
Water buffering layerWater buffering helps the plants to survive dry spells. There-fore, the lower half of the tray ensures buffering of the rainwa-ter.
1
2
3
4
5
1
2
3
4
5
Notes
©2015