This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
MEGANE 3 CC
Installation manual: Parrot MKi + Parrot CK3100 range
The brand name RENAULT MEGANE III CC and the RENAULT logo are the property of RENAULT. This document is only valid for the vehicle model MEGANE III CC® year 2008 to 2011, excluding all other models in the same range and excluding later modifications made to the vehicle by the manufacturer. The Parrot brand name and logos are the exclusive property of Parrot SA.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Accessories required
Disassembly 30min
Kit installation 30min
Refitting 30min
Testing 15min
Total 1h45min
NO ACC wire
NO ISO
N/A UNIKA
FRONT SPEAKER TEL mode
ALL MUSIC mode
Fitting time (estimated) / Main features
Tools
-TORX screwdriver - Cutting pliers
- Crimping pliers - Multimeter or pilot lamp
- Hose clamp - Electrical tape
- Round male terminal
"Please contact your Wholesaler to purchase accessories."
Kram ref. Dealer ref.
CK range 86795 77 11 428 303
MKi range 84795X795 77 11 428 303
Photos not contractually binding
CK range MKi range
Updating
Plastic trim removal tools FACOM / BERNER
FACOM DX-25 kit (n°4 tools)
To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at
www.parrot.com/usa/support/downloads
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Disassembly
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Disassembly 1 / 4
Using the plastic trim tools, unclip the cover above the glove box.
Using the plastic trim tools, unclip the cover next to the steering
wheel.
Using the plastic trim tools, unclip the radio and air
conditioning covers.
Pull it out without disconnecting, insert the removal tools into the slots on each side of the radio.
1
3
2
4
5 6
Unclip the radio, pull it carefully, then remove the trim tools.
Pull and lift the radio disconnecting the connector and
the antenna.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Disassembly 2 / 4
Using the plastic trim tools, unclip the cover located on the right side
of the dashboard.
Disconnect the connector for the passenger airbag trigger.
Unscrew screw 1 from the glove box.
Unscrew screw 2 from the glove box.
7
9
8
10
11 12
Unscrew screws 3, 4 and 5 located above the glove box.
Unscrew screw 6 in the glove box near the light.
1 2
3 4 5
6
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Disassembly 3 / 4
9 10
Pull the glove box firmly to unclip it, then remove it unplugging the
light connector.
Using the plastic trim tools, unclip the central air vent assembly.
Remove the assembly without disconnecting it.
Using the plastic trim tools, unclip the cover located on the
left side of the dashboard.
13
15
14
16
17 18
Remove screws 7 and 8. Using the plastic trim tools, unclip the headlight adjuster and
disconnect it.
7
8
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Disassembly 4 / 4
Pull firmly to unclip the panel under the steering wheel and put
it on the floor without disconnecting the bottom.
Remove the passenger side door seal.
19 20
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Finding an ACC wire 1/2
Remove the large black connector located under the fuse box, under
the steering wheel.
Remove the thin YELLOW wire from the bottom row of the black
connector.
1 2
9 10
Using a jumper or splice, connect a wire.
Pass the wire under the steering wheel to the central air vent
assembly.
3 4
5 6
Run the wire into the vents. Pass the wire into the glove box housing.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Finding an ACC wire 2/2
On the adapter 86795 or 7711428303, cut the red wire
between the fuse holder and the ISO connector and connect the
ACC wire.
Swap the fuse holders i.e. the red and orange wires.
7 8
9
On the adapter 84795X795, reconnect the ACC wire using a
round male terminal .
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Microphone passage
Stick the bracket supplied to the panel above the steering column,
after thoroughly cleaning the surface.
Then pass the cable towards the radio housing.
1 2
For this vehicle, we recommend fitting the microphone to the upper steering wheel panel to avoid air whirls when the top is down
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Feeding the accessory cable
In the bottom of the glove box, insert the cable into the hole next
to the light.
Then bring it out leaving sufficient length.
1 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Fitting the hands-free system 1 / 2
Connect the adaptor to the original connector and connect all of the wires to the blue box as shown in the diagram below. Test the assembly
before reassembly then slide all the cables behind the glove box and attach them with wire
ties.
1
ISO adapter
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Fitting the hands-free system 2 / 2
Pass the cable through the central air vent assembly.
Bring the wire out in the glove box housing.
Glue the support (supplied) after degreasing the upper left corner
of the vent located on the dashboard.
2
4
3
12
Clip the central air vent assembly back on. (Make sure that you DO
NOT cut the screen cable.)
4
!
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Testing
Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - That the menu is displayed on the screen. (Language or iPod.) 2 - That the system can be muted. (Click in the blue box.) 3 - That there is no sound coming from the speakers. 4 - That the sound from the voice menu is coming out of the front speakers. 5 - Then turn off the ignition, check that the kit switches off and that the "goodbye" message appears on the screen. (If not, reverse the fuses on the kit's wiring harness.) 6 - Pair a telephone with the kit to make a call. (Check that both the microphone and the kit are working.)
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
MEGANE 3 CC
Reassembly
Refit the system using the following procedure: 1 – Re-connect and replace the radio. 2 - Replace the glove box by pushing hard. (Pay attention to the accessory cable.) 3 - Replace screws 1, 2, 3, 4, 5 and 6 in the glove box. 4 – Re-connect the passenger airbag selector. 5 – Re-fit the right dashboard panel. 6 – Replace the cover located below the steering wheel by pushing hard. 7 - Replace screws 7 and 8. 8 – Re-connect and replace the headlight adjuster. 9 – Re-fit the panel on the left-hand side of the dashboard. 10 – Re-fit the car stereo and air conditioning surround. 11 - Replace the steering wheel side cover. 12 - Replace the cover above the glove box.