Download - TAP MPC Blow Dry Insulation Fact Sheet
-
8/2/2019 TAP MPC Blow Dry Insulation Fact Sheet
1/1
R-
Value
MinimumThickness*
(inches)
CoveragePer Bag**(Sq. Ft.)
Bags perThousand
Sq. Ft.
Weight perSq. Ft.***(pounds)
7 1.9 115.3 8.7 0.26
9 2.4 89.7 11.1 0.3311 3.0 73.4 13.6 0.4112 3.2 67.3 14.9 0.45
13 3.5 62.1 16.1 0.4814 3.8 57.7 17.3 0.52
18 4.9 44.8 22.3 0.6719 5.1 42.5 23.5 0.71
22 5.9 36.7 27.3 0.8224 6.5 33.6 29.7 0.89
25 6.8 32.3 31.0 0.9326 7.0 31.0 32.2 0.9728 7.6 28.8 34.7 1.04
30 8.1 26.9 37.2 1.1132 8.6 25.2 39.6 1.19
34 9.2 23.7 42.1 1.2636 9.7 22.4 44.6 1.34
38 10.3 21.2 47.1 1.4140 10.8 20.2 49.5 1.49
42 11.4 19.2 52.0 1.5644 11.9 18.3 54.5 1.64
45 12.2 17.9 55.7 1.67
46 12.4 17.5 57.0 1.7148 13.0 16.8 59.5 1.78
50 13.5 16.1 61.9 1.8652 14.1 15.5 64.4 1.93
55 14.9 14.7 68.1 2.0456 15.1 14.4 69.4 2.08
58 15.7 13.9 71.8 2.1660 16.2 13.5 74.3 2.23
Client ofName
Name of By
Insulation City, State,
Insulation Technician
.
TAP BLOWN DRY INSULATION FACT SHEET
Suburban
Pest Management879 W. Jericho Tpke
Smithtown NY 11787
Phone
631-864-6900 Fax
631-864-3175
www.suburbanexterminating.com
CONTROLS: Cockroaches, TermitesAnts, Silverfish, Earwigs, Crickets,Sow bugs, Millipedes, CentipedesAnd Booklice.
TAP Pest Control Insulation will beInstalled with the manufacturersrecommendations to provide a value of
R- ____ using _____ bags of insulation tocover ____ square feet of area.
Name Building
Building Address
City, State, Zip
Installed Installer
McNeely Pest ControlCompany Name
Company Technician Zip
____________________________________
____________________________________Date Installed
Thermal Acoustical Pest Control
BLOWN DRY INSULATION FACT SHEET
*Minimum installed thickness, inches **Avg. bag weight, 30 lbs
***Minimum installed weight of insulation, lb./ft
TAP Thermal, Acoustical, and Pest Control Insulationis a ready-to-use
insect control insulation. This product is tested to help control the voids
(attic, wall between-floors, crawlspace)where the product is applied.
Its effect begins only after insect contact with the product. Not recommended
as sole protection against termites. Use of this product does not substitute for pre
and/or post-construction mechanical alteration, soil treatment or foundation
treatment. For active termite infestations, get a professional inspection.
READ THIS BEFORE YOU BUY . . . What you Should Know About R-Values. . .
The chart shows the R-value of this insulation. R means resistance to heat flow. The higher the R-value, the greater theinsulating power will be. Compare insulation R-values before you buy.There are other factors to consider. The amount of insulation you need depends mainly on the climate in which you live.Also, you fuel savings from insulation will depend upon the climate, the type and size of your house, the amount of insulationalready in your house, and your fuel use patterns and family size. If you buy too much insulation, it will cost you more thanwhat youll save on fuel.To achieve the stated R-value, it is essential that this product be installed at the coverage rates shown by a professionalinsulation applicator using equipment especially designed for this product and application technique. The above chart is forguidance only. Actual coverage may vary depending upon atmospheric conditions, application technique and equipment.
Customer Information
Name:______________________________
Address:_____________________________Town, State, Zip:______________________Phone:______________________________Email:_______________________________
Installation cost: $___________________ Tax: $___________________ Total: $___________________Deposit: $___________________Balance: $___________________
Date of installation:_____________________
Suburban Representative:________________
Suburban Pest Management TAP Insulation - Estimate Worksheet
TAP INSULATION FACT SHEET