8/2/2019 TAP MPC Blow Dry Insulation Fact Sheet

1/1

R-

Value

MinimumThickness*

(inches)

CoveragePer Bag**(Sq. Ft.)

Bags perThousand

Sq. Ft.

Weight perSq. Ft.***(pounds)

7 1.9 115.3 8.7 0.26

9 2.4 89.7 11.1 0.3311 3.0 73.4 13.6 0.4112 3.2 67.3 14.9 0.45

13 3.5 62.1 16.1 0.4814 3.8 57.7 17.3 0.52

18 4.9 44.8 22.3 0.6719 5.1 42.5 23.5 0.71

22 5.9 36.7 27.3 0.8224 6.5 33.6 29.7 0.89

25 6.8 32.3 31.0 0.9326 7.0 31.0 32.2 0.9728 7.6 28.8 34.7 1.04

30 8.1 26.9 37.2 1.1132 8.6 25.2 39.6 1.19

34 9.2 23.7 42.1 1.2636 9.7 22.4 44.6 1.34

38 10.3 21.2 47.1 1.4140 10.8 20.2 49.5 1.49

42 11.4 19.2 52.0 1.5644 11.9 18.3 54.5 1.64

45 12.2 17.9 55.7 1.67

46 12.4 17.5 57.0 1.7148 13.0 16.8 59.5 1.78

50 13.5 16.1 61.9 1.8652 14.1 15.5 64.4 1.93

55 14.9 14.7 68.1 2.0456 15.1 14.4 69.4 2.08

58 15.7 13.9 71.8 2.1660 16.2 13.5 74.3 2.23

Client ofName

Name of By

Insulation City, State,

Insulation Technician

.

TAP BLOWN DRY INSULATION FACT SHEET

Suburban

Pest Management879 W. Jericho Tpke

Smithtown NY 11787

Phone

631-864-6900 Fax

631-864-3175

www.suburbanexterminating.com

CONTROLS: Cockroaches, TermitesAnts, Silverfish, Earwigs, Crickets,Sow bugs, Millipedes, CentipedesAnd Booklice.

TAP Pest Control Insulation will beInstalled with the manufacturersrecommendations to provide a value of

R- ____ using _____ bags of insulation tocover ____ square feet of area.

Name Building

Building Address

City, State, Zip

Installed Installer

McNeely Pest ControlCompany Name

Company Technician Zip

____________________________________

____________________________________Date Installed

Thermal Acoustical Pest Control

BLOWN DRY INSULATION FACT SHEET

*Minimum installed thickness, inches **Avg. bag weight, 30 lbs

***Minimum installed weight of insulation, lb./ft

TAP Thermal, Acoustical, and Pest Control Insulationis a ready-to-use

insect control insulation. This product is tested to help control the voids

(attic, wall between-floors, crawlspace)where the product is applied.

Its effect begins only after insect contact with the product. Not recommended

as sole protection against termites. Use of this product does not substitute for pre

and/or post-construction mechanical alteration, soil treatment or foundation

treatment. For active termite infestations, get a professional inspection.

READ THIS BEFORE YOU BUY . . . What you Should Know About R-Values. . .

The chart shows the R-value of this insulation. R means resistance to heat flow. The higher the R-value, the greater theinsulating power will be. Compare insulation R-values before you buy.There are other factors to consider. The amount of insulation you need depends mainly on the climate in which you live.Also, you fuel savings from insulation will depend upon the climate, the type and size of your house, the amount of insulationalready in your house, and your fuel use patterns and family size. If you buy too much insulation, it will cost you more thanwhat youll save on fuel.To achieve the stated R-value, it is essential that this product be installed at the coverage rates shown by a professionalinsulation applicator using equipment especially designed for this product and application technique. The above chart is forguidance only. Actual coverage may vary depending upon atmospheric conditions, application technique and equipment.

Customer Information

Name:______________________________

Address:_____________________________Town, State, Zip:______________________Phone:______________________________Email:_______________________________

Installation cost: $___________________ Tax: $___________________ Total: $___________________Deposit: $___________________Balance: $___________________

Date of installation:_____________________

Suburban Representative:________________

Suburban Pest Management TAP Insulation - Estimate Worksheet

TAP INSULATION FACT SHEET