2 *Prices and specifications are subject to change without prior notice.
TECO 830 3D technology wheel aligner for car TECO The 3D wheel aligners use the latest camera and computer technologies for high accuracy and impressive speed.
Features: -‐ • Electronic wheel aligner based on Windows XP Professional software
platform, suitable to perform wheel alignment adjustments for cars and light commercial vehicles.
• Conceived for industry professionals, TECO 830 is equipped with 8 high resolution digital cameras and 4 anti-‐shock visual targets.
• Product warranty: 12months.
Technical Specification: -‐ • Measuring technology – Cameras • Angle measuring device – Target • Operating system – Windowa XP embedded • Alignment precision – 0,01° • Total toe – ± 20° • Camber – ± 10° • Caster – ± 30° • Thrust angle – ± 10° • Data bank -‐ > 20.000 • Power supply – 240V/1ph • Noise level -‐ < 70 ± 3 dB(A) • Central unit weight – 150 Kg (330lbs) • Camera head weight – 35 Kg (77 lbs) • OPTINAL items included: MNT + STP + C830 + AS26 + CPRM2 + LPT
*Prices and specifications are subject to change without prior notice. 3
Product Catalogue 2013
GEOLINER 680 3D technology wheel aligner for car HOFMANN
The 3D wheel aligners of the geoliner series use the latest camera and
computer technologies for high accuracy and impressive speed.
Features: -‐ • Windows XP operating system, custom vehicle specifications, regional specifications, splash screen selection, calibration history, backup / restore
of calibration & setup data. • Aligner system diagnostics & changeable readings in demo mode
• Vehicle specifications: -‐ 30+ years • Multiple languages: -‐ 26 total
Operator efficiency: -‐
• Integrated help system (PDF format), 3D animations, tools, parts & adjustment instructions.
• Customer data entry advanced customer database, customer database backup / restore.
• Multiple clamp support, multiple print formats, multiple units of measure & multiple alignment wizards (including custom).
• User login, inspections & report; custom inspections, driver compliant diagnostics, A/I alignment diagnostics, roll forward & split positioning
sequence. • Equalize toe warning &adjust front before rear warning.
• Product warranty: 12months.
Technical Specification: -‐ • Front caster -‐28° to +28°
• Front & rear camber -‐15° to +15° • Wheel size 11”-‐ 25” • Tire diameter Unlimited • Tread width 48” – 96” • Wheel base 79” – 200”
• Power requirement 240v/50Hz/1Ph • Data transmission method CCD imaging technology
GEOLINER 680.GEN4 3D technology wheel aligner for car HOFMANN The new generation of 3D wheel aligners, the series geoliner Gen 4, uses ultra high resolution cameras, handy ultra high resolution targets and the powerful Pro42 software. Those benefits help the operator to accomplish wheel alignment much faster and in a more professional way than before.
Features: -‐ • Fixed-‐height camera beam support • Vehicle Orientation Directional Indicator (VODI) guides the technician through the measuring
process • PC with icon based Pro42 premium user software • Ultra high resolution cameras • Extra light ultra high resolution targets with universal wheel clamps 11“–22“ • EZ-‐Link steering angle sensor reset • Optional drive-‐on camera for easy positioning of the vehicle on the lift • Complete and up-‐to-‐date OEM specs • Lift version incl. lifting equipment (flexible work level 0 –2.0 m) • Mobile terminal • ±20“ TFT wide-‐screen monitor, colour printer • Integrated OEM procedures • 3D all readings screen • 3D animation graphics • Advanced measurement of vehicle dimensions – live • On-‐line help with 3D animation graphics • EZ Toe for easy and convenient settings at maximum steering angle • EZ Access for measurement with demounted wheels • A-‐arm adjustment • Cradle adjustment • Compatible with asanetwork • Optional TIP (target imaging pointer) for ride height measurement • Optional Fixed-‐Height Camera Support Extended/Electronic-‐Tilt Camera Support Kit
Specifications: -‐ • Toe-‐out on turns – yes • Camber at zero toe (front axle) – yes • Advanced vehicle dimensions live – yes • RollingRadius / Tyre diameter – yes • Steering asymmetry with diagnostics – yes • Caster and SAI turntables – yes • Caster trail – yes • SAI – yes • SAI elevated – yes • Toe curve change – yes • Scrub radius – yes • Steering angle max. – yes • Wheel sizes (Inch) -‐ 11 – 22 • Ackermann angle – yes • Ride height modified vehicle specs – yes • Automatic ride height measurement – yes • FrameCheck™ light-‐truck frame angle – yes • Caster, camber, toe live turntables – yes • Caster, camber, toe live elevated – yes • EZ Toe® -‐ yes • EZ Access® caster, camber, toe with demounted wheels – yes • A-‐arm adjust – yes • Cradle adjust – yes • Drag link adjust – yes • Single tie rod adjust – yes • Rear shims – yes • Display / monitor -‐ ±20" TFT • Network compatible (yes) – asanetwork • Communication – cordless • Measuring system -‐ 3D • Clamping range of wheel clamps (Inch) -‐ 11 – 22 (OPTIONAL extension kit support up to 29”)
4 *Prices and specifications are subject to change without prior notice.
v
GEOLINER 680 3D technology wheel aligner for car HOFMANN The 3D wheel aligners of the geoliner series use the latest camera and computer technologies for high accuracy and impressive speed.
Features: -‐ • Fixed-‐height camera beam support • Mobile terminal with drawer for printer and compartment for PC plus additional storage
space • Set of 4 targets with high-‐performance wheel clamps 11" -‐ 22" • PC with Windows operating system and Pro32 premium user software • ±20” TFT wide-‐screen monitor • Colour printer • Simple operation and quick accurate measured results • Complete and up-‐to-‐date OEM specs • Integrated OEM procedures • Measurement screen with all relevant data • Advanced measurement of vehicle dimensions – live • On-‐line help with 3D animated graphics • 3D overall display • EZ Toe® for easy and convenient settings at maximum steering angle • EZ Access® for measurement with demounted wheels • Compatible with asanetwork • Cordless communication between targets and camera system • Standard accessories: Steering wheel holder, brake pedal lock, IR remote control • Optional TIP (Target Imaging Pointer) for ride height measurement • Optional Fixed-‐Height Camera Support Extended/Electronic-‐Tilt Camera Support Kit
Specifications: -‐ • Toe-‐out on turns – yes • Camber at zero toe (front axle) – yes • Advanced vehicle dimensions live – yes • RollingRadius / Tyre diameter – yes • Steering asymmetry with diagnostics – yes • Caster and SAI turntables – yes • Caster trail – yes • SAI – yes • SAI elevated – yes • Toe curve change – yes • Scrub radius – yes • Steering angle max. – yes • Wheel sizes (Inch) -‐ 11 – 22 • Ackermann angle – yes • Ride height modified vehicle specs – yes • Automatic ride height measurement – yes • FrameCheck™ light-‐truck frame angle – yes • Caster, camber, toe live turntables – yes • Caster, camber, toe live elevated – yes • EZ Toe® -‐ yes • EZ Access® caster, camber, toe with demounted wheels – yes • A-‐arm adjust – yes • Cradle adjust – yes • Drag link adjust – yes • Single tie rod adjust – yes • Rear shims – yes • Display / monitor -‐ ±20" TFT • Network compatible (yes) – asanetwork • Communication – cordless • Measuring system -‐ 3D • Clamping range of wheel clamps (Inch) -‐ 11 – 22 (OPTIONAL extension kit support up to 26”) • Power supply -‐ 230 VAC 1ph 50/60 Hz
*Prices and specifications are subject to change without prior notice. 5
Product Catalogue 2013 Optional accessories:
HOFMANN
G680_EAK0268J63A Quick clamp kit • Set of 4 tyre quick clamps • Set of 3 x 16 claw sleeves (three different types) • Allows accurate clamping without risk of scratching
the wheel finish. Provides secure attachment to wheel while plastic sleeves placed over standard claws ensure proper placement and wheel protection.
G680_EAK0268J62A 4” Extension kit • Increases maximum clamping diameter by 4”
G680_EAK0305J04A 7” SPWC extension wheel clamp kit • Increases maximum clamping diameter by 7”
G680_EAK0268J62A Touchless alignment wheel clamp compatible • Only the tire is contacted • Clutch limited clamping force ensures
accurate and repeatable results • Durable and lightweight magnesium
construction
Specifications: -‐ • Tire diameter – 19”-‐39” • Weight – 3.2 Kg • Clamping force – 16.8 Kg Construction – Cast magnesium
6 *Prices and specifications are subject to change without prior notice.
G680_EAK0256J71A TIP-Ride height target kit • As the system provides step-‐by-‐step instructions, simply hold the TIP
(Target Imaging Pointer) against the vehicle touch points and this exclusive digital imaging tool measures OEM specifications to ±0.05”. The screen provides a live camera view to aid in target placement and an audible signal to indicate when each measurement is complete.
G680_EAK0284B10A1 EZ-stream scan tool kit • Allows the technician to reset the Steering Angle
Sensor (SAS) during the alignment procedure by integrating the steps through the aligner console.
• EZ-‐Stream is Fast, Simple and Affordable. • Follows OEM required reset procedures. • Yearly updates with alignment specs.
G680_EAK0289J91A Drive-On camera aid Drive-‐on Camera Aid eliminates the need for assistance with positioning the vehicle on the lift.
G680_EAK0289J64A Motorized camera beam tilt kit • Fixed-‐Height Camera Support Extended/Electronic-‐
Tilt Camera Support Kit with remote control.
*Prices and specifications are subject to change without prior notice. 7
Product Catalogue 2013
TECO 804 CMOS sensors wheel aligner for cars & light comm. vehicles TECO Computerized 2,4 GHz radio wheel aligner complete with PC unit based on Windows XP software platform and 4 ultra-‐light measuring heads with 8 CMOS cameras. It performs the reading and calculation of all characteristic angles for cars and light commercial vehicles. Main features: -‐ • Complete with monitor LCD 19", • Rechargeable commercial batteries type AA; • Angle reading system through 8 CMOS sensors; • Data transmission system to the central unit via radio; • Primary data bank storing over 20.000 vehicles; • Secondary data bank to be customized with supplementary vehicles; • Possibility to customize functions, display and language. • The machine is standard supplied with 4 measuring heads equipped with
8 CMOS cameras, pedal depressor and steering wheel holder. • Product warranty: 12months. Technical Specification: -‐ • Data transmission system – Radio 2,4 GHz • Angle measuring device – CMOS • Operating system – Windowa XP embedded • Alignment precision – 0,01° • Total toe – ± 20° • Camber – ± 10° • Caster – ± 30° • Set back – ± 10° • Thrust angle – ± 10° • Power supply – 240V/1ph • Noise level -‐ < 70 ± 3 dB(A) • Net weight – 130 Kg (285 lbs) • OPTINAL items included: STP + AS26 + CPRM2
8 *Prices and specifications are subject to change without prior notice.
UWA-E88 CCD sensors wheel aligner for cars & light comm. vehicles HKUNICO Computerized Four-‐Wheel Alignment System with 8-‐Sensor CCD Technology Under Windows®4 wheel alignment machine. Main features: -‐ • Eight camera CCD technology provides instantaneous 360 degree
measuring of toe-‐in, camber, caster, steering axle inclination (SAI),set-‐back, thrust angle, wheelbase difference and track width difference, etc.
• Geometric centre-‐line and thrust measuring principle ensures perfect measuring and adjustment results.
• 2.4GHz high-‐frequency wireless Zigbee communication mode with merits of low energy consumption, great transmission capacity and reliable transmission stability.
• Periodically updated database containing over 20,000 latest domestic and overseas vehicle data with easy fuzzy query function.
• Environment adaptive designed optical measuring system adapts to maximum working environment even in sun-‐exposed alignment bay.
• Multi-‐language audio play, 3D animation navigation and built-‐in professional training course combining with simulator guides even less experienced technicians quickly and easily through the measuring process.
• Spoiler mode allows technicians to tilt the sensor head up or down to measure small rim vehicle or super-‐low chassis vehicle (No spoiler adapter needed).
Technical Specification: -‐ • Total toe : ± 12° • Thrust angle : ± 10° • Camber : ± 10° • Caster : ± 20° • King pin angle : ± 20° • Clamping capacity : 10” – 25” • Power requirement : 240V/50Hz/ 1Ph
*Prices and specifications are subject to change without prior notice. 9
Product Catalogue 2013
TECO 812 CCD sensors wheel aligner for trucks and trailers TECO Computerized 2,4 GHz radio wheel aligner complete with PC unit based on Windows XP software platform and 4 measuring heads with 8 CCD cameras. Dedicated to industry professionals, It performs the reading and calculation of all characteristic angles for cars and light commercial vehicles. Main features: -‐ • Complete with monitor LCD 19"; • Measuring head supports for battery recharge via cable; • Angle reading system through 8 CMOS sensors; • Data transmission system to the central unit via radio; • Primary data bank storing over 20.000 vehicles; • Secondary data bank to be customized with supplementary vehicles; • Possibility to customize functions, display and language. • The machine is standard supplied with 4 measuring heads equipped with
8 CMOS cameras, pedal depressor and steering wheel holder. • Product warranty: 12months. Technical Specification: -‐ • Data transmission system – Radio 2,4 GHz • Angle measuring device – CCD • Operating system – Windowa XP embedded • Alignment precision – 0,01° • Total toe – ± 48° • Camber – ± 10° • Caster – ± 30° • Set back – ± 24° • Thrust angle – ± 24° • Power supply – 240V/1ph • Noise level -‐ < 70 ± 3 dB(A) • Net weight – 150 Kg (330 lbs) • OPTINAL items included: STP + AS26 + CPRM2
10 *Prices and specifications are subject to change without prior notice.
UWA-T18 CCD sensors wheel aligner for trucks and trailers HKUNICO Computerized Four-‐Wheel Alignment System with 8-‐Sensor CCD Technology Under Windows®4 wheel alignment machine.] Main features: -‐ • Using CCD image recognition, measurement technique • Using Zigbee wireless network can optionally transfer extension equipment • Sensor touch-‐key manipulations, personalized image-‐text interface • The system has self-‐diagnosis, self-‐correction and self-‐repair functions • The self-‐correction function can be divided into unified correction and
sensor independent correction. • System measurement can be done in the outage state. • Grading operation management can restrict wrong operations without
permission. • System measurement and data transmission are of high speed and stability
and super anti-‐jamming. • Vehicle chassis omni-‐directional 360° closed measurement. • Environment adaptive optical measurement system. • Multilanguage display and voice broadcast. • 3D animation navigation, built-‐in training video course. • A6/B5 adjustment function. • Low chassis and small size vehicle wheel measurement • Compatibility of truck and car measurement function. • More than 20000 data of cars and over 8000 data of trucks, a variety of
retrieval modes and intelligent update function. • Using truck special eccentric compensation procedures to guarantee
precise measurement. • Using mobile measurement platform without environmental restrictions • Eight sensors can realize precise aligning. • Introducing "Loran positioning" principle, truck aligners can accurately
measure related parameters without detaching or attaching. • Trucks, semi-‐trailers, full-‐trailers, coaches and all kinds of re-‐equipping
vehicles, etc can be measured. • Using geometric center line or thrust line measurement. • HBIN is optional.
accuracy range
Front wheel
Toe ±1′ ±24° amber ±1′ ±10° Caster ±2′ ± 0° Steering Axle Inclination ±2′ ±20°
Set-Back ±1′ ±10°
Rear wheel
Toe ±1′ ±24 Camber ±1′ ± 0° Set-Back ±1′ ±10° Thrust-Angle ±1′ ±10°
*Prices and specifications are subject to change without prior notice. 11
Product Catalogue 2013
Optional accessories:
Code Specification 320045C Nissan Cefiro 320045HC Honda Civic 1.7 320023CRV Honda CRV
320034 Perodua Kancil 320045KC Kia Carnival, N za Ria 32004 azda Lantis 320028 Proton 320045AT To ota Altis 320028AV Toyota Avanza 320023 Toyota Camry 320023ES Toyota Estima 320045 Toyota SEG 320045V Toyota Vios
320037 Suzuki Vitara, Perodua Kembara, Naza Citra, Kia Cerens, Hyundai Matrix
320034KT Kancil Kamatsu 320028KT Proton Kamatsu 320037KT Vitara Kamatsu
Code Specification UNI CAM BOLT
12mm Universal cam bolts
Code Specification W. TOE BOLT
Proton Wira/ Putra/ Satria toe bolt
Code Specification SHIM-1 Shim 4x4 – 1mm SHIM-2 Shim 4x4 – 2mm
A1052 Car camber alignment tool • With 4pcs Alignment plates. • Hydraulic function. • Suit for most cars.
A1053 Car camber alignment tool • With 2 spacers to adjust the angle. • Applicable: Mercedes, Mitsubishi, Honda
9014 Fixed magnetic camber gauge • Accurate camber measuring tool for use after repair or replacement of
struts, wheel assembles, etc. • Vials housed in a durable non-‐magnetic casing with a magnetic head that
attached firmly to rotors or spindles.