COMPREHENSIVEEQUIPMENT RANGE
Terex® Minerals Processing SystemsT Minerals®erexTTe s Processing Syystems
UQECOM
EMPIMPREH
NT REHENS
EGNARSIVE
EQ
Terex® Feeders
Terex® Stepped Vibrating Grizzly Feeder
Welded steel box
Bolt-on ARS side liners and pan liners
Tubular reinforced feeder pan
Outboard front and rear spring mounting
Spring supports bolted to feeder box
Vibrator unit huck-bolted to feeder box
Unbalanced, counter-rotating vibrator unit shafts
Spherical self-aligning roller bearings
Timing gear adjustment concentrates vibration at feed end, centrally or
discharge end
Oil-bath lubrication
Versatile bolt-together grizzly assembly with adjustable bar spacing and angle
tip
Tapered, heavy-duty, horizontally mounted abrasion resistant grizzly bars
STANDARD FEATURES
Sloped grizzly at 8° decline (one 1524mm section)
Sloped set-back grizzly at 8° decline (one 1524mm section)
Stepped grizzly (two 1524mm sections)
For other grizzly bar profiles consult factory
Double-decked screen attachment with single clamp bar and woven wire screen
cloth
Banded V-belt drive with motor sheave
Motor pivot base
OPTIONAL EQUIPMENT
Also Available
Terex® Cedarapids Vibrating Grizzly Feeder
Terex® Jaques Apron Feeder
Main Frame: Fully bolted and dowelled four-piece heavy duty structure.
Both the front and rear frames are high strength cast steel with the side
plates produced from high strengh structural plate.
Flexible Installation: Options that allow the mounting feet to be fitted in various
positions.
Infinitely Variable Closed Side Setting Adjustment:
Through hydraulic actuated wedge.
Jaws Retention: Both the fixed and moving jaws are retained with a wedge
locking system. The main frame and swing jaw holder are protected from wear
due to the unique design of the jaw faces that completely protect the inlet and
outlet points of the crushing chamber.
Swing Jaw Holder: Fully enclosed section cast steel construction.
Jaws: Corrugated manganese jaws are reversible top to bottom.
Toggle: Rocking end design
Main Shaft: Large diameter manufactured from forged steel with no threads or
tapered bearing journals.
FEATURES INCLUDE
Terex® Jaw CrushersJW42 Jaw Crusher
The JW World Jaw Crusher provides the latest technology in
heavy duty crusher design that delivers high production,
infinite setting adjustment, large feed opening, bolted
mainframe, cast swing jaw holder and optional positional of
the crusher support feet to suit installation requirements,
mobile and fixed plant mounting.
This crusher is designed to handle hard rock, ores and
demolition concrete for the quarrying, mining and recycling
industries.
Inside view of the Terex® JW jaw showing the optional hydraulicadjust system.
8 groove V-belt driven sheave for crusher
Medium-Coarse concave chamber configuration
‘System 4’ hydraulic control system
Heavy cast upper and lower main frame
High quality cylindrical roller and taper roller/radial bearings
Large capacity feed ring from heavy steel plate
Heat treated alloy steel main shaft shrunk fitted for high crushing loads
Overload protection for un-crushable objects
Double acting external hydraulic cylinders allows adjustment of closed
side setting
Steep angled wedge ring assembly incorporates low friction pads.
Wiring diagram to aid connection to motor and starter
Lubrication oil tank and pipe work
Oil tank air blast cooling system
Oil tank immersion heater
STANDARD FEATURES
TC Cone Crushing
Poorly shaped or weak particals are crushed first due tocomplex loading.
Terex® TC Cone CrushersTC 1000
Terex® TC Cone Crusher
Conventional Cone Crushing
Single layer crushing particals crush in the weakest plane resulting generally with flake.
Terex® TC Cone Crusher with the lubrication tank and system 2 controls mounted on the optional live frame assembly
Standard wedge belt drive
Drive guard to suit standard motor position
‘System 3’ hydraulic control provides remote control capability in lieu of ‘system 2’
‘System 2’ hydraulic control provides remote control capability and electronic
parameter monitoring for the hydraulic system in lieu of ‘system 4’
Main crusher drive motor
Anti-vibration mountings
Live frame assembly: sub-frame including drive, guard, motor (if supplied), mounts
OPTIONAL EQUIPMENT
Inside view of the TC cone showing the crushing chamber and bearingassembly
Automatic Hydraulic Adjustment System (PLC): 11 kW (15 hp) skid mounted
hydraulic power unit for crusher adjustment and tramp iron relief system with
cable/hose allows skid to be mounted 4.5m (15') from crusher. Includes remote
adjust panel on 60m (200') tether with indicator lights, amp meter, position feed
back indicator.
Manual Hydraulic System: Remote push button box with 15m, 30m, or 45m (50',
100', or 150') tether
Crusher skid frame with motor mount, drive take-up and drive guard
Crusher hopper extension
Automatic Cold Oil Circulation Kit for manual hydraulic system (recommended
below 4°C / 40°F): Automatically circulates oil at a predetermined interval to assist in cold weather
start-up (standard with PLC system)
Electric drive motors
Electrical switchgear for drive motors
V-belt drive with V-belts, motor sheave and bushing
Export preparation and lift kit
Terex® MVP Rollercone®
Manual Hydraulic Adjustment System (Man-in-the-loop) with control buttons on
door, able to mount 4.5m (15') from crusher
Hydraulic powered threaded upper assembly for quick crusher setting adjustment
under load
Hydro-pneumatic tramp iron relief system instantly resets crusher setting after
passing uncrushable material
High efficiency ElJay® Rollercone® roller bearing construction
Lubrication oil flow safety switch and warning horn
Crusher mounted lubrication oil pump (460/3/60 or 380/3/50)
Hydraulic skid with 7.4 kW (10 hp) provides hydraulic power for tramp and
adjustment systems with 7.6 m (25') hose for mounting near crusher (electric
switchgear not included)
Lubrication motor starter and hydraulic motor starter
Oil heaters (115 volt) in sump and hydraulic skid
External lube oil heat exchanger (not included on MVP 280) with 7.9 m (26' ) hose
for mounting near crusher
STANDARD FEATURES OPTIONAL EQUIPMENT
High efficiency Rollercone® roller bearing design
Closed SideSetting
Upper ThrustBearing
Lower ThrustBearing
Pinion Shaft
Pinion Gear
Bowl Liner
DischargeSide
Wedge Plate
Spiral BevelGear.
Internal view of the MVP showing the superbearing assembly
Extra large feed opening
Hydraulically opened frame• Large hydraulic cylinders• Integrated piloted locking valves
Balanced high strength high inertia rotor• Massive backing bar with replaceable insert • Three bar impeller standard• Chrome-nickel-moly-steel flared shaft
Patented center pull wedge system
Replaceable rotor guards
Large 127 mm (5") thick one piece manganese steel impeller bars
Massive cast manganese “monoblock” reversible primary apron
Hydraulic assist apron adjustment
Spring loaded secondary apron
Easy removal of primary and secondary aprons
Replaceable 76 mm (3") thick high-chrome secondary apron liners
AR500 replaceable frame liners
5 hp (3.7 kW) electric/hydraulic power unit (460-3-60)
Large spherical roller bearings, hydraulically removable, taconite-type
labyrinth seals
Flanged feed opening accepts feed adapters
Replaceable feed plate liners
Easy access inspection doors
Left hand drive (facing feed opening)
STANDARD FEATURES
127 mm (5" ) thick one piece tool steel impeller bars
Two bar impeller rotor
Tool steel secondary apron liners
Bolt-on feed adapter with chain/rubber curtain
V-belt drive
1346 mm (53") high inertia sheave
1016 mm (40") drive sheave (1200 rpm motor, 360-610 crusher rpm)
1130 mm (44.5") drive sheave (1800 rpm motor, 500-560 crusher rpm)
1346 mm (53") drive sheave (1800 rpm motor, 420-470 crusher rpm)
Right hand drive
OPTIONAL EQUIPMENT
Terex® Cedarapids Horizontal Shaft Impactors1300 Series Impactors
Two installed Terex® Cedarapids impactors
Terex® Canica Vertical Shaft Impactors
Rock on Anvil(ROS Series)
Rock on Rock(ROR Series)
Crusher:
Heavy-duty bearing pedestal with large spherical roller bearings
Astralloy main shaft
Cast chrome pedestal protection
Patented “Hydralid” hydraulic lid lifter
Externally adjustable feed tube system
Cast feed tube
Cast lid and mainframe liners
Heavy-duty motor mounts with motor covers and adjustable take-ups
Vibration shut-off switch
Belt guards
Heavy-duty open shoe table
STANDARD FEATURES
Modular Oil System:
133 Litre reservoir
Positive displacement oil pump
Low pressure relief value and high pressure lid lifter valve
Low pressure shut-down switch
Oil heater
Oil sight gauge, oil temperature gauge and lube oil pressure gauge.
Standard Safety Features:Open lid safety lock
Shut-off switches detect: Low oil pressure, Excessive vibration (vibration switch), Open lid
OPTIONAL EQUIPMENT
Two-piece crusher design(removable tub section)
Pinion gear drive assembly
4, 5 port autogenous rotors
4, 5 port anvil ring rotors
Rockbox
Cermic wear parts
Tungsten carbide wear parts
Portable chassis mount
Stationary support stand with walkways and ladders
Diesel power
Variable frequency drives
Electronic soft starts
Installed Terex®Canica 2000 dual drive VSI
Shoe and Anvil(HD Series)
Terex® Cedarapids TSH Horizontal Screen
Installed Terex®Cedarapids TSH screen
Adjustable oval stroke angle, stroke length and speed
Patented “flow through” bearing lubrication
Patented baffled splash oil lubrication system
Huck-bolted screen box construction (no welds)
Through-hardened forged alloy steel, high performance gears
Patented double O-ring sealed vibrator construction
Hand access holes (standard on 20' long screens)
High strength 6.35 mm (1/4") steel side plates*
*HR 7.94 mm (5/16") steel side plates on models 6202 and 7202
Gland-type non-wearing shaft seal
Self-aligning, two row spherical roller bearings
Clamp bars adjust for all wire media thickness
Spherical washer tensioning system
STANDARD FEATURES
High strength tapered steel spindles
Heavy wall shaft tubes
Abrasion resistant discharge lip liners
Spray pipe knock-outs
Keyless hub locking assembly
Single V-belt 1200 or 1500 rpm drive
Extended life V-belt
Right-hand drive
Enclosed belt guard
Adjustable speed motor drive sheave
Spring-loaded belt tension idler
Bolt-on feed box with replaceable bottom liner
Coil suspension springs
Rubber surge snubbers
Single crown deck
OPTIONAL EQUIPMENT
1200 rpm tefc electric motor
1500 rpm tefc electric motor
Rigid I-beam base frame with motor mount
Left-hand drive
Medium scalping option on 6' x 20' and 7' x 20' screens
152 mm (6") side liner extension on 6' x 20', 7' x 20' and 8' x 20' screens
Wire screen cloth
Wedge tensioning for wire cloth
Cylinder tray deck
End-tension bottom deck
5' wire cloth panels on 6' x 20' and 7' x 20' screens
Divided deck on 5', 6', 7' and 8' wide screens
Flat decks for modular media on 5', 6', 7' and 8' wide screens
Spray system
Rubber spray hole covers
Special-length discharge lips
Rubber spring suspension
Terex® SimplicityInclined Screen
Two Terex® Simplicity dual mechanism screensTerex®Simplicity Dual Mechanism washing screen
One-piece deck construction
Huck fastening
Wider 33 series bearings
Reinforcement/stiffener plate
Full screening area
Full-height corner supports
Ready to go - user friendly design
V-belt drive
Heavy-duty eccentric shaft assembly
STANDARD FEATURES
Motors
Urethane deck covering
Wedge take-ups
Ball trays
End tension decks
Wear protection for deck cross members
Rubber springs
Asphalt cap on crown bars
OPTIONAL EQUIPMENT
Center split cloth
Recirculating oil lubrication systems, water or air cooled
Dust enclosures
Side plate liners/take-up liners
Spray bars
Extra deck clearance for 3-deck models
Spray systems
Urethane deck covering
Asphalt cap on crown bars
Two Bearing Screen
Designed and built for increased performance, the J50 will get youmore Tonnes for your operation. Terex quality engineering is built-throughout this machine including the traditional easy accessedcomponents.The J50 Gyracone provides high throughput for fine, medium andcourse settings. The adjustable stroke and power to 275kWprovides increased capacity.
FEATURES INCLUDE Benefits of the Features
Adjustable crushing stroke
High speed operation More tph and greater throughput.
Increased efficiency. Less recirculation of production and
improved single pass product yield. Finer product.
Available power management now includes up to 275 kW. Increased productivity.
New improved manganese profiles. Retains feed opening throughout life of the manganese.
Optional CMS Automation Package. Monitors and optimises operating conditions for
maximum productivity
Hydraulic adjustment under load Easy non-stop CSS adjustment
Roller bearing eccentric and spherical spider bearing Long life and efficient operation
Matches crusher capacity to the application to ensure
choked feed condition
Terex® Jaques Gyracones
J50
Internal view of the Terex® Jaques J cone Terex®Jaques J cones installed at a hard rock project
Equipment RangeFeeders
Jaw Crushers
Manufactuer Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Terex Terex Terex Terex Jaques Jaques Jaques
Model RC45III RC54II MVP 280 MVP 380 MVP 450X MVP 550TC1000 Sand
TC1000 TC1300 TC1500 J35 J50 J65
MOTOR SIZE200hp
(149KW)300hp
(224KW)200hp
(149KW)300hp
(224KW)400hp
(298KW)500hp
(373KW)215hp
(160 KW)230hp
(170 KW)300hp
(224 KW)300hp
(225 KW)200hp
(150kW)335hp
(250kW)470hp
(350kW)
CONE HEADDIAMETER
42.5"(1080mm)
52"(1321mm)
42.5"(1080mm)
48"(1219mm)
54"(1372mm)
60"(1524mm)
39"(1000mm)
39"(1000mm)
51" (1300 mm)
59" (1500 mm)
35" (890 mm)
50" (1270 mm)
65" (1650 mm)
MAXIMUM FEEDSIZE
10 3/8"(264mm)
13 3/8"(340mm)
10 3/4"(273mm)
12 3/4"(324mm)
14 15/16"(379mm)
15 13/16"(402mm)
2 1/2"(63mm)
7 1/2"(195mm)
8 1/2"(220mm)
12 1/2"(320mm)
350mm 150 mm 250 mm
CAPACITY (MTPH) 122 - 345 163 - 431 109 - 405 123 - 507 136 - 585 182 - 737 70 - 125 125 - 220 220 - 320 320 - 950 65 -200 280 - 690 140 - 510
BASIC CRUSHERWEIGHT
32,500 lbs(14,500 kg)
42,500 lbs(19,278 kg)
36,500 lbs(16,556kg)
46,000 lbs(20,865kg)
52,600 lbs(23,828kg)
68,000 lbs(30,844kg)
22,040 lbs(10,000)kg
22,040 lbs(10,000)kg
48,500 lbs(22,000)kg
74,075 lbs(36,000) kg
23571 lbs(10,690) kg
60,638 lbs(27,500) kg
105,840 lbs(48,000) kg
CRUSHER WIDTH
86"(2185mm)
102"(2591mm)
82"(2083mm)
88"(2235mm)
94.8"(2407mm)
102"(2591mm)
91" (2311)
91"(2311)
111.5"(2830mm)
124" (3150 mm)
69" (1750 mm)
90" (2285 mm)
121" (3070 mm)
CRUSHER HEIGHT
74"(1880mm)
81.5"(2070mm)
79.1"(2008mm)
79.9"(2028mm)
82.7"(2101mm)
88.7"(2254mm)
68"(1730mm)
68"(1730mm)
85.12" (2164 mm)
143.5" (3643 mm)
80.5"(2045 mm)
105" (2674 mm)
121" (3072 mm)
BEARING TYPETHRUST
Roller RollerRoller
(Super)Roller
(Super)Roller
(Super)Roller(Super)
Taper Roller
Taper Roller
Taper Roller
Taper Roller
Bronze wearrings
Bronze wearrings
Bronze wearrings
BEARING TYPERADIAL
Roller Roller Roller Roller Roller Roller Roller Roller Roller Roller Roller Roller Roller
ADJUSTMENTScrew/Hyd
MotorShim
Screw/HydMotor
Screw/HydMotor
Screw/HydMotor
Screw/HydMotor
HydraulicCyl
Hydraulic Cyl
HydraulicCyl
Hydraulic Cyl
Hydraulic Piston
Hydraulic Piston
Hydraulic Piston
Cone Crushers
Manufacturer Simplicity Simplicity Jaques
Type Pan Feeder Vibrating Grizzly Feeders Apron Feeders
Size RangeLarge size range from 22" x 6' (559 x
1,828mm) to 86" x 30' (2,184 x 9,144mm)Large size range from 33" x 10' (838 x
3,048mm) to 86" x30' (2,184 x 9,144mm)D3 - D11 (Actual size dependant on
application)
OptionsStructure or cable mounted. Pan and side
liners
One, two or three steped grizzly decks. Fixed orAdjustable openings. Double deck screening.
Perforated plate. Pan and side liners. Drives. Spillage conveyors.
Other Information All feeders can be custom built to meet customers specificatiuons
Manufacturer Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Terex Terex Jaques Terex Jaques Jaques
Model JC2236 JC2248 JS3042 JS3054 JC4248 JC3660 JC5460 JW40 JW42 ST47 JW55 ST48 ST60
MOTOR SIZE100hp (75KW)
150hp(110KW)
150hp(110KW)
200hp(149KW)
300hp(224KW)
250hp(187KW)
400hp(300KW)
120hp (90kw)
150hp(110KW)
200hp(150KW)
200hp(150kw)
250hp(185KW)
335hp(250KW)
NOMINAL FEEDOPENING
36" x 22" (914 x
559mm)
48" x 22" (1,219 x
559mm)
43" x 30"(1,092 x762mm)
54" x 30"(1,372 x762mm
48" x 42"(1,219 x
1,067mm)
60" x 36"(1,524 x914mm)
60" x 54"(1,524 x
1,372mm
40" x 25"(1,000 x635mm)
42" x 30"(1,070 x760mm)
48" x 36"(1,219 x914mm)
55" x 30"(1,400 x760mm)
48" x 42"(1,220 x
1,065mm)
60" x 50" (1,500 x
1,275mm) BASIC
CRUSHERWEIGHT
24,903 lbs (11,296kg)
43,094 lbs (19,547kg)
43,800 lbs(19,841kg)
51,800 lbs(23,465kg)
104,567 lbs(47,431kg)
107,664 lbs(48,836kg)
196,258 lbs(89,023kg)
26,050 lbs(11,820kg)
38,130 lbs(17,300kg)
81,550 lbs(37,068kg)
50,700 lbs(23,000kg)
92,570 lbs(42,000kg)
170,150 lbs (77,200kg)
SETTINGRANGE
2-1/2" - 6" (63 -
150mm)
1-1/2" - 6" (40 -
150mm)
4" - 12" (100 -
300mm)
4" - 12" (100 -
300mm)
4" - 12"(100 -
300mm)
4" - 12"(100 -
300mm)
4" - 12" (100 -
300mm)
2" - 6.5" (50 -
165mm)
3" - 8" (75 -
200mm)
4" - 9"(100 -
225mm)
3.5" - 9"(88 -
225mm)
5" - 10" (125 -
250mm)
6" - 12" (150 -
300mm)CAPACITY(MTPH)
54-240 50-327 118-728 195-1360 163-998 226-1542 226-1542 85 - 325 135 - 430 190-610 230 - 680 285-730 465-1030
STANDARD ADJUSTMENT
Shim ShimHydraulic/
ShimHydraulic/
ShimShim Shim Shim
HydraulicWedge
HydraulicWedge
ShimHydraulic
WedgeShim Shim
FRAME STYLE Welded Welded Welded Welded Welded Welded Welded Bolted/Cast Bolted/Cast Welded Bolted/Cast Welded Welded
LUBRICATIONSYSTEM
Grease Grease Grease Grease Grease or Oil Grease or Oil Grease or Oil Grease Grease Grease Grease Grease Grease
Terex® Minerals Processing Systems
Manufactuer Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids
Model 4040 1313 1316 1516 1520
CAPACITY (MTPH) 136 - 181 136 - 272 227 - 363 454 - 544 544 - 726
MOTOR SIZE 200 hp (150KW) 300 hp (224kw) 400 hp (298kw) 600 hp (448kw) 700 hp (522kw)
INLET SIZE INCHES 34" x 40" (876 x 1032mm) 43" x 49" (1099 x 1238mm) 43" x 64" (1099 x 1645mm) 52" x 65" (1321 x 1651mm) 52" x 81" (1321 x 2057mm)
MAXIMUM FEED SIZE 16" (400mm) 34" (864mm) 34" (864mm) 34" (864mm) 34" (864mm)
ROTOR SIZE D X W 39" x 39" (1000 x 1000mm) 50" x 48" (1270 x 1219mm) 50" x 64" (1270 x 1626mm) 61" x64" (1549 x 1626mm) 61" x 80" (1549 x 2032mm)
BASIC CRUSHER WEIGHT 20,400 lbs (9,252 kgs) 30,800 lbs (13,970 kgs) 38,500 lbs (17,463 kgs) 55,700 lbs (25,260 kgs) 67400 lbs (30,532 kgs)
NUMBER OF BLOW BARS 3 3 or 4 3 3 3
Manufactuer Canica Canica Canica Canica Canica Canica Canica Canica Canica
Model 1200 1400 2000SD 2000DD 2050 2300 2350 2500 3000
Motor Drive Single Single Single Dual Dual Dual Dual Dual Dual
Maximum Feed Size(Longest
Dimension)1 1/2" (33mm) 2" (51mm) 4" (102m) 4" (102mm) 4" (102MM) 5" (127MM) 8" (203MM) 10" (254MM) 12" (305MM)
Maximum Through-put
Capacity (MTPH)62 113 250 350 363 454 544 726 907
Power requirement for
maximum throughput
50-150HP (37-112KW)
100 - 250 HP(75-186KW)
200 - 400 HP (149-298KW)
400 - 700HP(298-522KW)
400 - 700HP (298 - 522KW)
400 - 700HP(298 - 522KW)
500 - 800HP(373 - 597KW)
600 - 1000HP(447 - 746KW)
700 - 1200HP (522 - 895KW)
Internal Configerations
AvailableHD, HDS HD, HDS, ROS, ROR
HD, HDS,ROS Highspeed,ROR Highspeed,ROS HD, ROR HD
HD, HDS,ROS Highspeed,ROR Highspeed,ROS HD, ROR HD
HD, HDS,ROS Highspeed,ROR Highspeed,ROS HD, ROR HD
HD, HDS,ROS Highspeed,ROR Highspeed,ROS HD, ROR HD
HD, HDS HD, HDS HD, HDS
IMPORTANT : Max feed size, throughput, and power requirement dependant on internal configuration used. Internal configuration dependant on actual feed material, discharge requirements, material abrasive & strenght properties. Contact your local MPS dealer for further information.HD = Heavy Duty (Open table /Anvils) HDS = Heavy Duty Sand (Open table/Anvils ROR = Rock on Rock (Enclosed Rotor/Rockshelf)ROS = Rock on Steel (Enclosed Rotor/Anvils)
Manufacturer Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids Cedarapids
Model TSH 5162 TSH 5163 TSH 6162 TSH 6163 TSH 6202 TSH 6203 TSH 7203 TSH 8203
DECK SIZE5’ x 16’(1524 x
4876mm)
5’ x 16’(1524 x
4876mm)
6’ x 16’(1828 x
4876mm)
6’ x 16’(1828 x
4876mm)
6’ x 20’(1828 x
6000mm)
6’ x 20’(1828 x
6000mm)
7’ x 20’(2133 x
6000mm)
8’ x 20’(2438 x
6000mm)NUMBER OF
DECKS2 3 2 3 2 3 3 3
MOTOR SIZE25 hp(19kw)
30 hp(22KW)
30 hp(22kw)
40hp (30KW)
40hp (30kw)
40hp (30KW)
50hp(37KW)
50hp(37KW)
BASICSCREENWEIGHT
12,500 lbs(5,670 kg)
15,300 lbs(6,940 kg)
15,100 lbs(6,849 kg)
19,100 lbs(8,664 kg)
18,260 lbs(8,283 kg)
21,860 lbs(9,916 kg)
26,540 lbs(11,998 kg)
28390 lbs(12,878 kg)
BEARINGSIZE
130mm 130mm 160mm 160mm 160mm 160mm 190mm 190mm
LUBRICATION OIL
SCREEN MOTION
OVAL STROKE
NUMBER OFSHAFTS
3
STROKE ADJUSTMENT
Stroke is changed by adding weights to flywheels. Stroke angle is adjusted by gear timing.
MAXIMUMSTROKE
3/4" (19mm)
MAXIMUMFEED SIZE
Standard: 10” (254mm) Medium Scalper Option: 14” (355mm)
MAXIMUMTOP DECK OPENING
5" (127mm)
AVAILABLEOPTIONS
Spay bars / Rubber or coil springs / base frame / polyurethane or wire mesh/end tension bottomdeck/key wedge clamps/scalping set-up/ball deck
Terex® Minerals Processing Systems products are also available mounted on a wheeledchassis in a number of different configurations and with either electric or diesel drive.Contact your local Terex® MPS dealer for further information on this range.
Semi-Mobile Plant (Chassis Mounted)
Horizontal Shaft Impact Crushers (HSI)
Vertical Shaft Impact Crushers (VSI)
Horizontal Screens Incline ScreensManufacturer Simplicity Simplicity Simplicity
Type Two Bearing InclineDual Mechanism
InclineScalping Screen
Size Range
Large size range from3' x 6' (914 x
1,828mm) to 8' x 20'(2,438 x 6,096mm)
Large size range from6' x 20' (1,828 x
6,096mm) to 8' x24'(2,438 x 7,315mm)
Large size range from3' x 6' (914 x
1,828mm) to 8' x 20'(2,438 x 6,096mm) -
Available in two bearing and dual
mechanism
Number ofdecks
1, 2, or 3 1, 2, 3 or 4 1, 2 or 3
Screen Options
Wedge take ups, balldeck, wear
protection for deckmembers, AR tube
shields, I-Beam mainframes, rubbersprings, liners,
centre split cloth, oilcooling systems, dust
enclosures, spraysystems,
asphalt decks,polyurethane
Wedge take ups, balldeck, wear protectionfor deck members, ARtube shields, I-Beammain frames, rubber
springs, liners,centre split cloth, oil
cooling systems, dustenclosures, spray
systems,asphalt decks,polyurethane
Perforated plate, grizzly sections, wire
mesh or any combination of these.
Other options available.
Other Information
All incline screens can be custom built to meet customers specifications
Listed throughput capacity, maximum feed size and motor requirementsare approximate and will vary depending on material properties, feedgradation, moisture content, chamber selection, feed method and othersite specific operating conditions. Contact your nearest Terex® MPS Dealerfor further details
Effective Date: June 2010. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2010 Terex Corporation.
Terex® Minerals Processing SystemsForm 25550 A4 (6/10)
www.terexmps.com
EuropeMiddle EastAfrica+44 (0) 28 82 418 790Omagh, N. Ireland
North America+1 (800) 248-3821Durand, MichiganCedar Rapids, IowaVancouver, Washington
Latin AmericaSouth America+1 (989) 288-3121
Terex® Minerals Processing Systems Main Locations
Asia+91 4344 302000Hosur, India+91 11 4361 0000Delhi, India+60 3 5631 6199Kuala Lumpur, Malaysia+66 38 214761Bangkok, Thailand
Australia+61 3 8551 9300MelbourneSydneyBrisbanePerth
Give us a call to learn more about our extensive equipment range.
tionsocaM Mi®erexTTeT
Main L
s
corPnerals
tsySgnissec
smet
Give us a call to le
arn more about our ex
xtensive equipment ra
ange.
0)0 A4 (6/1orm 2555FMinerals Processin®erexTTe
countries. All rights are reimplied. Products and serapplicable to our equipme
Opappropriatethefollowdocument are for illustrativ
01Effective Date: June 20
.terexmwww
ng Systems
erex is a registered trademaserved. TTervices listed may be trademarks, servi
andard written warranty aent is the stequipourusingwhenManuals’erator
. Refer to the approve purposes only. Product specifications and prices a
mps.com
SA aerex Corporation in the Uark of TTeerex Coice marks or trade-names of TTe
applicable to the particular product anirresponsibactotherwisetoorpment
s Manual for instruct’priate Operatorhange without notice are subject to c
e0 TTe1and many other countries. © 20orporation and/or its subsidiaries in t
erex makes no other waale and TTend sdeatorinjuryseriousinresultmay bly
ions on the proper use of this equipmhe photographs and/oor obligation. T
erex Corporation.SA and otherthe U, express or arranty
warrantyonly heTth.ment. Failure to or drawings in this