Download - Wireless Technology -IoT Projects
Center of Excellence
M2M - Wireless Technology
Projects Undertaken from year 2001 to 20081. Bluetooth Protocol Stack and Hands free Vehicle
Communication 2. Wireless Communication Gateways - Zigbee /GPRS/GPS/CAN3. Zigbee - Transmitter & Receiver Remote control4. Fleet Management Solution5. Low cost CAN-USB Converter6. Handheld PDA device
For more contact on: www.in.linkedin.com/in/nareshmalik1
Current Project on “Internet of Things” started this year 2015“Unified Solution - IoT Tool Kit/ Specialization”
IoT-Proof of Concept and Tool KitsUnified Solution - IoT Tool Kit/ Specialization - 2015
IoT Healthcare Solution POC 1. Sensors/Actuator edge devices and
sensor networks 2. Edge device to Gateways for cloud
connectivity 3. Data Analytics structured and
Unstructured4. Mobile Application Development
IoT Tool Kit/ Specialization1. IoT Training for Enterprises2. Embedded development using
Bluetooth/ Zigbee3. Cloud connectivity through
gateways4. Engineering Data Analytics 5. Medical Device applications
From my earliest days of Wireless product to Driverless electric vehicle POCdevelopment to today's wearable computing, IoT devices, I am working onproducing “IOT - Health care Proof of Concept and Took Kit”.
HC I Driver
Audi
o(S
CO)
Cont
rol
LMPBaseband H/w & RF InterfaceLink Manager
HCI Bus Driver
API’s
RFCOMM SDP
Data (ACL)
L2CAP
RTOS
I/F
LMP
Core Bluetooth Stack and Application(Projects Completed in Year 2001 )BLUETOOTH STACK
Developed for different usage models for cable replacement by using C and OS independent programming design concept on MS DOS platform compatible PC.
Mobile Apps made easy User Experience interface
Adv Version Bluetooth Stack Implemented(Projects Completed from year 2001 – 2002)
Mobile App Car Hands-free Interface between Mobile Phone and VCS
Fully Compatible Bluetooth Stack
Business Case :The customer required the an application for their Vehicle Hand-Free Communication Devices in Car to take over some of the functionality’s of the Bluetooth enabled based Mobile Phone to allow the user to communicate in a hands-free environment in the car while driving.
Vehicle Comm. System
Automotive Wireless Comm. Gateway M2M/ Telematic /Industrial Applications
Wireless/Wire line Interface• Zigbee 802.15.4 Freescale
MC13192 complete Physical layer modem
• Wavecom WirelessCPU/SIM card for GSM/GPRS
• Furuno GH-84 is a miniature high sensitivity, low power GPS
• CAN network/Rs232 interface• Analog/Digital IO/12-24 V DC Power• AVR Microcontroller AT90CAN128
Applications• Suitable for current IoT Apps• Automotive Telematics • Industrial Machine 2
Machine• Cost under USD 100
PCB Rear Side
PCB Top Side
Year 2007-08
Zigbee Remote - Transmitter & Receiver(Projects Completed in year 2005-06)
Zigbee Transmitter
Zigbee Receiver • Demonstrate working system and
Host Application in Education and Teaching aids
• Consumer and industrial apps in Point- to Point/ Multi-to-Point mode
• Build based on proven hardware module to support Energy meter and sensor networks
Zigbee Applications
Fleet Management Solution(Projects Completed from year 2006 – 2008)
Wireless Automotive Communication Gateway system is based on wireless technologies like ZigBee, GSM/GPRS and GPS integrated with CAN based In-vehicle network and desktop application. This complete system is planned for monitoring vehicle health conditions remotely using GPS/GSM/GPRS technologies
Low Cost USB-CAN Converter(Projects Completed from year 2004 – 2006)
Controller Area Network (CAN) bus is predominantly used for connecting automotive Electronic Control Units .connecting (Desktop/Laptops) on the automotive CAN network is most sought after for diagnostics and fault detection applications.
CAN to USB converter is R&D project to demonstrate capabilities for development of Silicon IP core, hardware and embedded software development for a end to end product with user app. Scope consists of-1. Silicon CAN IP Core Development2. Porting on Low cost FPGA3. PCB & Software development4. Application SW and Testing5. Industrial design & Packaging
CAN to USB Converter
• Platform that leverages the outstanding capabilities of Intel XScale technology processor.
• Low cost asset providing mobile computing, information storage and retrieval capabilities.
• Designed to optimize low power consumption and high performance processing.
• Modular design makes it easy to customize and build other applications, faster.
• Handheld device developed by COE china team that provides mobile computing, information storage and retrieval capabilities for personal or business use.
• Provides access to real time information “anytime – anywhere “for Field Workers / Technicians / Inspectors, Sales Force etc.
• The device can be customized in terms of form factor for use in rugged industrial and factory environment.
Low Cost Handheld Device - PDA(CoE POC Project completed in years 2005 – 2006)
Internet of People
Internet of Things