drehbearbeitung von sonderwerkstoffen - … von sonderwerkstoffen bcs10t für titanwerkstoffe,...
TRANSCRIPT
Drehbearbeitung von SonderwerkstoffenBCS10T für Titanwerkstoffe, BCS20T für Superlegierungen
Turning of special materialsBCS10T for titanium, BCS20T for super alloys
2
Titansorte BCS10T und Superlegierungssorte BCS20TTitanium grade BCS10T and super alloy grade BCS20T
Boehlerit der führende Hartmetallspezialist stellt mit den Sorten BCS10T für die Bearbeitung von Titan und BCS20T für Superlegierungen zwei neue Sorten vor.
Besonders ausgewählte, temperaturstabile Hartmetallsubstrate, innovative Beschichtungen, sowie die neue MT – Geometrie für die mittlere bis leichte Schruppbearbeitung gewährleisten eine wirtschaftliche Drehbearbeitung auf diesen schwer zerspanbaren Werkstoffen.
Boehlerit, leading carbide specialist, is introducing two new grades: BCS10T for the coating of titanium and BCS20T for super alloys.
Specially selected, temperature-stable carbide substrates in combi-nation with the innovative coating and MT geometry for medium to light roughing ensure economic machining at the very highest level.
Technologievorteile Sorte BCS10TTechnological advantage grade BCS10T
KundennutzenCustomer benefits
Hohe Bearbeitungssicherheit bei der Bearbeitung von Titanmaterialien wie Ti-6AL-4V oder Ti-5AL-SnHigh machining security on machining of titanium materials as Ti-6AL-4V or Ti-5AL-Sn
Hitze- und oxidationsbeständige Plasma CVD Beschichtung gewährleistet eine um 40 % höhere Schnittgeschwindigkeit Temperature stable and oxidation resistant Plasma CVD coating guarantees a 40 % increase in cutting speed
Ausgewähltes, temperaturstabiles Hartmetallsubstrat zur Vermeidung von plastischer VerformungSelected temperature-stable carbide substrate to avoid plastic deformation
TiBN Plasma CVD SchichtTiBN Plasma CVD layer
www.boehlerit.com
Technologievorteile Sorte BCS20TTechnological advantage grade BCS20T
KundennutzenCustomer benefits
Stabile, sichere Bearbeitung von Superlegierungen wie Inconel, Hastelloy, usw.Stable, reliable machining of super alloys like Inconel, Hastelloy and so on
Geringe Aufklebeneigung und um 50 % höhere StandzeitenLow sticking disposition and 50 % higher tool life
Besonders feinkörniges SubstratEspecially fine grain substrate
Neue glatte, dünne PVD - Beschichtung mit hohem AluminiumanteilNew smooth, thin PVD - coating with high content of aluminium
Spanformer MT mit scharfer Schneide für die Sorten BCS10T (Titan) und BCS20T (Superlegierungen)Chip former MT with sharp cutting edge for the grades BCS10T (titanium) and BCS20T (super alloys)
Sicherer Spanbruch bei mittlerer und leichter Schruppbearbeitung auf Superlegierungen und TitanSecure chip breakage at medium and light roughing on super alloys and titanium
Technologievorteile Spanformer MT (Mittel Titan)Technological advantage chip former MT (Mittel Titan)
KundennutzenCustomer benefits
3
Wendeschneidplatten Indexable inserts
www.boehlerit.com
Bestellbeispiel: 1 Stück WNMG 080408-MT BCS10T Order example: 1 piece WNMG0 80408-MT BCS10T
WNMG 080408-MT 8,60 12,70 4,76 5,16 0,8 WNMG...
l d s d1 r BCS20T Bestellbezeichnung Ordering code
Sorte GradeIdent. No.
BCS10T
5067564 5072897
Bestellbeispiel: 1 Stück WNMG 080408-MT BCS10T Order example: 1 piece WNMG 080408-MT BCS10T
RCMT 1606-MT - 16,00 6,35 5,20 - RCMT 2006-MT - 20,00 6,35 6,50 -RCMT...
l d s d1 r BCS20T Bestellbezeichnung Ordering code
Sorte GradeIdent. No.
BCS10T
50744255074433
DCMT 11T304-MT 11,60 9,52 3,97 4,40 0,4
DNMG 150608-MT 15,50 12,70 6,35 5,16 0,8
DCMT...
l d s d1 r Bestellbezeichnung Ordering code
Sorte GradeIdent. No.
DNMG...
5067592 5072895
5067583 5072892
d1
sl
d
r
BCS20TBCS10T
Bestellbeispiel: 1 Stück DCMT 11T304-MT BCS10T Order example: 1 piece DCMT 11T304-MT BCS10T
CCMT 09T304-MT 9,70 9,52 3,97 4,40 0,4
CNMG 120408-MT 12,90 12,70 4,76 5,16 0,8
CCMT...
l d s d1 r Bestellbezeichnung Ordering code
Sorte GradeIdent. No.
CNMG...
5068955 5072896
5067582 5072898
BCS20TBCS10T
Bestellbeispiel: 1 Stück CCMT 09T304-MT BCS10T Order example: 1 piece CCMT 09T304-MT BCS10T
d1
sd
4www.boehlerit.com
SortenübersichtGrade overview
HC-M10BCS10THC-S10HC-M20
BCS20THC-S20
Ab
stec
hen
Par
ting
Ein
stec
hen
Gro
ovi
ng
Gew
ind
e-b
earb
eitu
ngTh
read
ing
Ho
be
lnS
ca
rfin
g
Frä
sen
Mill
ing
Dre
he
nTu
rnin
g
Har
teW
erks
toff
eH
ard
mat
eria
ls
Gra
ug
uß
Gre
y c
ast
iro
n
Ro
stfr
ei
Sta
inle
ss
ISO
Sta
hl
Ste
el
BearbeitungsverfahrenApplication
WerkstoffgruppeGroup of materials
SorteGrade
P K H T M D S G P
AnwendungsbereichRange of applications
NE
-Met
alle
(Al,
etc.
)N
on
ferr
ou
s m
etal
s
SN
Ho
chw
arm
fest
Hig
h t
emp
e-ra
ture
mat
eria
ls
M
StandardsorteStandard grade01 10 20 30 40 50
05 15 25 35 45
HauptanwendungMain applicationWeitere AnwendungFurther applicationsGesamtbereich nach ISO 513
Full range to ISO 513
AnwendungsschwerpunktApplication peak
05 15 25 35 4501 10 20 30 40 50
Spanformstufengeometrien für Titan und SuperlegierungenChip groove geometries for titanium and super alloys
16
10
6,3
4
2,5
1,6
1
0,63
0,4
0,25
0,16
0,1
12,5
8
5
3,2
2
1,2
0,8
0,5
0,32
0,2
0,12
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
0,032 0,05 0,08 0,12 0,2 0,32 0,5 0,8 1,2 2,0
Sch
nitt
iefe
a
MTc
Anwendung: AußendrehenApplication: External turningWerkstück: FlanschWork piece: FlangeWerkstoff: TiAl6Material: TiAl6Wendeplatte/Sorte: CNMG 120408-MT BSC10TInsert/Grade: Schnittparameter: vc 50 m/minCutting data: ap 2,0 mm f 0,25 mm/U mm/rev Kühlung: Emulsion Cooling: Emulsion
4 Teile4 pcs
MT - GeometrieMT - geometry
MitbewerberCompetitor
2 Teile2 pcs
ErgebnisResult
Anwendung: AußendrehenApplication: External turningWerkstück: WelleWork piece: ShaftWerkstoff: Inconel 718Material: Inconel 718Wendeplatte/Sorte: CNMG 120408-MT BSC20TInsert / Grade: Schnittparameter: vc 40 m/minCutting data: ap 3,5 mm f 0,30 mm/U mm/rev Kühlung: Emulsion Cooling: Emulsion
MT - GeometrieMT - geometry
MitbewerberCompetitor
ErgebnisResult
1 Teil1 pc
0,7 Teile0.7 pcs
BearbeitungsbeispieleMachining Examples
5www.boehlerit.com
Schnittdatenrichtwerte Drehen BCS10T und BCS20TCutting data standard values BCS10T and BCS20T
S
BCS10T und BCS20T
Wer
ksto
ff-
Gru
pp
e
Empfohlene Materialien Technische Daten
Unlegiertes Titan (ASTM 1-11)α - Legierungen (z.B.: Ti - 5Al - Sn, oder Ti - 8Al - MoV)α - β Legierungen (z.B.: Ti - 6Al - 4V)Inconel, Hastelloy, Waspaloy
Vorschubf = 0,2 - 0,45 mm/USchnittgeschwindigkeitenvc = 30 - 70 m/minBearbeitung
S
BCS10T and BCS20T
Mat
eria
l-gr
oup
Recommended materials Technical hints
Unalloyed Titan (ASTM 1-11)α - Alloys (e.g. Ti - 5Al - Sn, oder Ti - 8Al - MoV)α - β Alloys (e.g. Ti - 6Al - 4V)Inconel, Hastelloy, Waspaloy
Feedf = 0,2 - 0,45 mm/revCutting speedvc = 30 - 70 m/minMachining
= Nassbearbeitung wet machining
= Trockenbearbeitung dry machining
673
D/E
-gül
tig a
b va
lid s
ince
09/
2014
BOEHLERIT GmbH & Co. KGWerk VI-Strasse 1008605 KapfenbergÖsterreich/AustriaTel. +43 3862 300 - 0Fax +43 3862 300 - [email protected]
Argentinien/Argentina SIN PAR S.A.Conesa 10B1878KSB Quilmes - Buenos AiresTelefon +54 11 4257 4396Telefax +54 11 4224 [email protected]
Brasilien/BrazilLMT Boehlerit Ltda.Rua Capricórnio, 72Alphaville Conde I Comercial06473-005 Barueri – São PauloSão PauloTelefon +55 11 554 60 755Telefax +55 11 554 60 [email protected]
Bulgarien/BulgariaBoehlerit GmbH & Co.KG Stantsionna Nr. 14, Etage 3, Office 15300 GabrovoTelefon +359 668 000 19Telefax +359 668 000 [email protected]
Saint George Group Ltd.Kuklensko shose 17i str.Plovdiv 4003Tel./Fax: +359 32 [email protected]
China/China LMT China Co. Ltd.No. 8 Phoenix Road,Jiangning Development Zone211100 NanjingTelefon +86 25 52103111Telefax +86 25 [email protected]
Deutschland/GermanyLMT Tool Systems GmbHHeidenheimer Straße 8473447 Oberkochen Telefon +49 7364 9579-0Telefax +49 7364 [email protected]
Dubai/DubaiHFD Electronic Spare Parts LLCThe Curve Bldg. SZROffice M40, P.O. Box 6293Dubai, United Arab EmiratesTelefon +971 4 380 7866Telefax +971 4 380 [email protected]
England/United KingdomLMT UK Ltd5 Elm CourtMeriden Business ParkCopse DriveMeriden CV5 9RGTelefon +44 16 76 523440Telefax +44 16 76 525 [email protected]
Finnland/FinlandOy Maanetä AbKeinumäenkuja 2, P.O. Box 7001510 VantaaTelefon +358 29 006 130Telefax + 358 29 006 [email protected] www.maantera.fiwww.boehlerit.com
Frankreich/FranceHorn SAS665 Av Blaise Pascal77127 LieusaintTelefon +33 1-64-88-59-58Telefax +33 [email protected]
Horn SAS564 rue Claude BallaloudZAE Bord d’Arve74950 ScionzierTelefon +33 40-50-183148Telefax +33 [email protected]
Indien/IndiaLMT Fette (India) Pvt Ltd29 (Old No. 14) II Main RoadGandhinagar, AdyarChennai 600 020, IndiaTelefon +91 44 244 05 136Telefax +91 44 244 05 [email protected]
Italien/ItalyLMT Italy S.r.I.Via Papa Giovanni XXIII, Nr. 4520090 Rodano (MI)Telefon +39 02 269 49 71Telefax +39 02 218 72 [email protected]
Mexiko/MexicoLMT Boehlerit S.A. de C.V.Av. Acueducto No. 15Parque Industrial Bernardo QuintanaEl Marqués, QuerétaroMéxico. C.P. 76246Telefon +52 442 221 5706Telefax +52 442 221 [email protected]
Niederlande/NederlandeHagro Precisie b.v.Industriepark 18NL-5374 CM SchaijkTelefon +31 486 462 424Telefax +31 486 461 [email protected]
Polen/PolandLMT Boehlerit Polska sp.z.o.o.Złotniki, ul. Kobaltowa 662-002 Suchy LasTelefon +48 61 659 38 00Telefax +48 61 623 20 [email protected]
Russland/RussiaZerspanung StandardLMT Tools Ltd. Serebryanicheskaya nab., 27 Off.101109028, MoscowPhone/fax: +7 495 2807 352 www.lmt-russia.ru
MWT-Engineering, Ltd. 5, bld 10, 2nd Enthuziastov str.111024, Moscow Telefon +7 495 222 5147Telefax +7 495 222 [email protected]
Schweden/SwedenEdeco Tool ABGräsdalsgatan 9650 02 Karlstad Telefon +46 54 55 80 00Telefax +46 54 55 80 [email protected]
Schweiz/SwitzerlandVargus Werkzeugtechnik Snel AGKnonauerstraße 566330 Cham 1Telefon +41 41 784 21 21Telefax +41 41 784 21 [email protected]
Singapur/SingaporeLMT Asia Pte Ltd1 Clementi Loop 04-04Clementi West District ParkSingapore 12 98 08Telefon +65 64 624 214Telefax +65 64 624 [email protected]
Slowenien/Slovenia KAC Trade d.o.o.Ložnica pri Žalcu 463310 ŽalecTelefon +38 63 78104080Telefax +38 63 [email protected]
Spanien/SpainLMT Boehlerit S.L.C/. Narcis Monturiol 11-1508339 Vilassar de Dalt BarcelonaTelefon +34 93 750 7907Telefax +34 93 750 [email protected]
Südkorea/South KoreaLMT Korea Co., LtdRoom # 1520,Anyang Trade CenterBisan-Dong, Dongan-GuAnyang-Si, Gyeonggi-Do,431-817, South KoreaTelefon +82 31 384 8600Telefax +82 31 384 [email protected]
Tschechien/Czech RepublicSlowakei/SlovakiaKancelár BoehleritSantraziny 753760 01 ZlínTelefon +420 577 214 989Telefax +420 577 219 [email protected]@boehlerit.skwww.boehlerit.czwww.boehlerit.sk www.boehlerit.comwww.lmt-tools.com
Türkei/TurkeyBöhler Sert Maden ve Takım San. ve Tic. A.Ş.Gebze Organize Sanayi Bölgesi1600. Sk.No: 1602 41480 Gebze – KocaeliTelefon +90 262 677 1737Telefax +90 262 677 1746bohler@bohler.com.trwww.bohler.com.trwww.boehlerit.comwww.lmt-tools.com
Ungarn/HungaryLMT Böhlerit Kft.PO Box: 2036 Érdliget Pf. 322030-Érd, Kis-Duna u.6.Telefon +36 23 521 910Telefax +36 23 521 [email protected] www.boehlerit.comwww.lmt-tools.com
USAKanada/CanadaLMT USA 1081 S. Northpoint Blvd.Waukegan, IL 60085Telefon +1 630 9695412Telefax +1 630 [email protected]