dsl-2750uc1_user manual_v.1.0.11_06.07.12_en
TRANSCRIPT
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
1/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
2/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Contents
Chapter 1. Introduction..........................................5
Contents and Audience.......................................................5Conventions.................................................................5
Document Structure..........................................................5
Chapter 2. Overview..............................................6
General Information.........................................................6
Specifications..............................................................
!roduct Appearance.........................................................11
Front Panel..............................................................11
Back Panel...............................................................12
Deliver" !ac#a$e...........................................................1%Chapter %. Installation and Connection..........................1&
'efore (ou 'e$in...........................................................1&
Connectin$ to !C...........................................................15
PC with Ethernet Adapter.................................................15
Obtaining IP Address Autoaticall! in O" #indows $P......................1%
Obtaining IP Address Autoaticall! in O" #indows &.......................1'
PC with #i(Fi Adapter....................................................2)
Con*iguring #i(Fi Adapter in O" #indows $P...............................25
Con*iguring #i(Fi Adapter in O" #indows &................................2%
Connectin$ to )e*+*ased Interface..........................................2,
Savin$ and -estorin$ Settin$s..............................................%2
Chapter &. Confi$urin$ via )e*+*ased Interface..................%%
)iards....................................................................%%
Internet "etup #i+ard....................................................,,
PPPoE or PPPoA Connection..............................................35
IPoA or Static IP Connection...........................................39
Dynamic IP Connection..................................................42
Bridge Connection......................................................45
3G Connection..........................................................47
"ite "etup #i+ard........................................................5-
#i(Fi "etup #i+ard.......................................................51
Status.....................................................................55
etwork "tatistics.......................................................55
/"0 "tatus...............................................................5%
#A "tatus...............................................................5&
/CP.....................................................................5
3outing 4able............................................................5'
0A Clients..............................................................%-
Pae 2o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
3/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
/et........................................................................61
#A......................................................................%1
Creating ADSL WA Connection...........................................!2
Creating Et"ernet WA Connection.......................................!#
Creating 3G WA Connection.............................................72
0A......................................................................&5
#atchdog.................................................................&&
)i+0i......................................................................
Coon settings..........................................................&'
Basic "ettings...........................................................-
"ecurit! "ettings........................................................1
AC Filter...............................................................)
"tation 0ist.............................................................%
#P"......................................................................&
$%ing WPS &'nction (ia We)*)a%ed Inter+ace.............................#9
$%ing WPS &'nction ,it"o't We)*)a%ed Inter+ace.........................#9
Additional "ettings......................................................'1
Advanced...................................................................2
"P.....................................................................',
6PnP.....................................................................')
Inter*ace 7rouping.......................................................'5
//".....................................................................'&
/"......................................................................'3outing..................................................................''
3IP.....................................................................1-1
A/"0....................................................................1-2
3eote Access...........................................................1-,
0irewall..................................................................15
IP Filters..............................................................1-5
8irtual "er9ers.........................................................1-
/:.....................................................................11-
Application 3ules.......................................................111
AC Filter..............................................................11,
3S' 4odem.................................................................115
In*oration.............................................................115
PI.....................................................................11%
3S' Stora$e...............................................................11
In*oration.............................................................11&
Filebrowser.............................................................11
Print "er9er............................................................11'
"aba...................................................................12-
Control...................................................................121
Parent Control..........................................................121
630 Filter..............................................................12,
Pae 3o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
4/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
S"stem....................................................................125
Adinistrator Password..................................................125
Con*iguration...........................................................12%
"!ste 0og..............................................................12&
Firware 6pgrade........................................................12'
4P Client..............................................................1,-
Ping....................................................................1,1
Chapter 5. Operation Guidelines................................1%2
Supported 3S' 4odems......................................................1%2
Safet" Instructions.......................................................1%%
)ireless Installation Considerations......................................1%&
Creatin$ wo Connections on One Channel...................................1%5
A/"0 #A Connections....................................................1,5
Ethernet #A Connections................................................1,%
Chapter 6. A**reviations and Acron"ms..........................1%
Pae 4o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
5/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Introduction
CH!"#$ 1% I&"$'DUC"I'&
Contents and Audience
This manual describes the router DSL-2750U and explains how to configure and operate it
This manual is intended for users familiar with basic networ!ing concepts" who create an in-home
local area networ!" and s#stem administrators" who install and configure networ!s in offices
Conventions
#(a)*le Descri*tion
text The bod# text of the manual
Before You Begin $ reference to a chapter or section of this manual
Quick Installation Guide $ reference to a document
C+an,e$ name of a menu" menu item" control %field" chec!box" drop-
down list" button" etc&
12.16,.1.1 Data that #ou should enter in the specified field
! 'nformation $n important note
Document Structure
Chapter 1describes the purpose and structure of the document
Chapter 2gi(es an o(er(iew of the router)s hardware and software features and describes its
appearance and the pac!age contents
Chapter 3explains how to install the router DSL-2750U and configure a *+ in order to access its
web-based interface
Chapter 4describes all pages of the web-based interface in detail
Chapter 5includes safet# instructions" tips for networ!ing and configuring the de(ice" and the list
of supported US, modems
Chapter introduces abbre(iations and acron#ms used in this manual
Pae 5o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
6/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
CH!"#$ 2% '/#$/I#
General Information
DSL-2750U is a multifunction ./$DSL/thernet router with 1i-i and built-in switch The router
allows accessing the 'nternet (ia . .S3 or +D3$ networ! %with a . US, modem 4connected&
'n addition" the de(ice allows accessing the 'nternet (ia $DSL technolog# and (ia thernet
technolog#
The router is euipped with an $DSL port to connect to an $DSL line and 6 thernet ports to
connect wor!stations Due to this feature" DSL-2750U represents a moderate-priced solution for
creating wired networ!s without an additional switch 'n addition" an# thernet port of the de(ice
can be used to connect to a pri(ate thernet line $lso the router has a US, port designed to connect
a US, modem" printer" or US, storage
The router supports reser(ation of an additional channel The reser(ation function !eeps the router
connected to the 'nternet e(en when the main connection is not a(ailable
DSL-2750U can operate as a base station for connecting wireless de(ices of the standards 0244b"
0244g" and 0244n2 The router supports multiple functions for the wireless interface8 se(eral
securit# standards %1*" 1*$/1*$2&" 3$+ address filtering" and the 1*S function
The wireless router DSL-2750U includes a built-in firewall The ad(anced securit# functions
minimi9e threats of hac!er attac!s" pre(ent unwanted intrusions to #our networ!" and bloc! access
to unwanted websites for users of #our L$:;ou can configure and manage the settings of DSL-2750U (ia the user-friendl# web-based interface
%the interface is a(ailable in se(eral languages&
4 :ot included in the deli(er# pac!age D-Lin! does not guarantee compatibilit# with all US, modems *lease" refer
to the!upported "!B #ode$ssection" page 42
2 The maximum speed of the wireless connection is limited b# the chipset up to 2003bps
Pae o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
7/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
Specifications*
Interfaces:
$DSL8 4
1L$:8 built-in 0244b" g" and n wireless interface
US,8 US, 20 t#pe $ port
Wireless Network:
' 0244n standard" ' 0244b/g compliant
Support of guest wireless networ!
1* data encr#ption
1*$/1*$2 securit# supporting T?'*" $S and T?'*@$S
3$+-based access to wireless networ!
*': and *,+ methods of 1*S
$d(anced settings
ADSL Standards:
$DSL8
multi-mode" $:S' T464 'ssue 2" 'TU-T .AA24 %.dmt& $nnex $" 'TU-T .AA22
%.lite& $nnex $" 'TU-T .AA64 %.hs&
$DSL28
'TU-T .AA2 %.dmtbis& $nnex $/L/3" 'TU-T .AA26 %.litebis& $nnex $
$DSL2@8
'TU-T .AA25 $nnex $/L/3
B The de(ice features are subCect to change without notice or the latest (ersions of the firmware and rele(ant
documentation" (isit wwwdlin!ru
The maximum speed of the wireless connection is limited b# the chipset up to 2003bps
Pae 7o! "3#
http://www.dlink.ru/http://www.dlink.ru/ -
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
8/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
WAN Connection Types:
.
$DSL8
***o
***o$
'*o$
Static '*
D#namic '*
,ridge
thernet8
***o
Static '*
D#namic '*
,ridge
ATM/PPP Protocols:
,ridged and routed thernet encapsulation
+-based or LL+-based multiplexing
$T3 orum U:'4/60 *+ %up to *+s&
$T3 $daptation La#er T#pe 5 %$$L5&
'TU-T 'E40 F$3 6/5 loopbac!
$T3 GoS
*** o(er $T3 %
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
9/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
Network Protocols and Fnctions:
Static '* routing
:$T %Network Address Translation&
DH+* ser(er/client/rela#
D:S rela#
DD:S
U*n*
Support of L$:
'.3* prox#
'.3* snooping
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
10/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
$S% Stora!e:
ile browser
*rint ser(er
Shared access to US, storage %Samba&
Confi!ration and Mana!e"ent:
3ultilingual web-based interface for configuration and management
$ccess (ia TL:T
irmware update (ia web-based interface
Sa(ing/restoring configuration to/from file
Support of remote logging
S:3* agent
$utomatic s#nchroni9ation of s#stem time with :T* ser(er
*ing function
L'Ds:
*ower
L$: 4-6
1L$:
1*S
US,
DSL
'nternet
Power:
xternal power adapter D+ 42/4$
F:/F power switch
F:/F 1i-i switch
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
11/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
Product Appearance
Front Panel
Figure 1. Front panel view.
L#D Mode Descri*tion
!o.er
Solid green The router is powered on
No light The router is powered off
Solid red $ malfunction of the router
L& 1-4
Solid green
$ de(ice is connected to the port of the router %for the L$: port
configured as the 1$: port8 the router is connected to an thernet
line&
Blinking green The rele(ant L$: port is acti(e %upstream or downstream traffic&
L&Solid green The router)s 1L$: is on
Blinking green The 1L$: interface is acti(e %upstream or downstream traffic&
!S
Solid green$ wireless de(ice is connected to the router)s 1L$: %lights for
se(eral minutes&
Blinking green $ttempting to add a wireless de(ice (ia the 1*S function
US
Solid green $ US, de(ice is connected to the router)s US, port
No light :o US, de(ice
DSL
Solid green DSL has been s#nchroni9ed
Blinking green Detecting a carrier signal and s#nchroni9ing DSL
No light :o carrier signal
Internet
Solid green $ 1$: connection %$DSL and/or thernet& is established
Blinking green The 1$: interface is acti(e %upstream or downstream traffic&
Solid red $n authori9ation failure
No lightThe router is in the bridge mode or no 1$: connection %neither
thernet nor $DSL& is established
Pae 11o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
12/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
Back Panel
Figure 2. Back panel view.
!ort Descri*tion
DSL $ DSL port to connect the router to the telephone line
L& 1-46 thernet ports to connect thernet de(ices Fne port can be used to connect to a
pri(ate thernet line
US $ US, port to connect a US, modem" printer" or storage
!S $ button to uic!l# add wireless de(ices to the router)s 1L$:
I$#L#SS
'&'66$ button to turn the router)s wireless interface on/off
'&'66 $ button to turn the router on/off
12/1 *ower connector
Pae 12o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
13/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
'erie.
Delivery Package
The following should be included8
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
14/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
CH!"#$ 3% I&S"LL"I'& &D C'&C"I'&
Before You Begin
*lease" read this manual prior to installing the de(ice 3a!e sure that #ou ha(e all the necessar#
information and euipment
)peratin! Syste"
+onfiguration of the multifunction ./$DSL/thernet router DSL-2750U %hereinafter referred to
as Jthe routerK& is performed (ia the built-in web-based interface The web-based interface is
a(ailable from an# operating s#stem that supports a web browser
We* %rowser
The following web browsers are recommended8 1indows 'nternet xplorer" 3o9illa irefox" orFpera
or successful operation" =a(aScript should be enabled on the web browser 3a!e sure that
=a(aScript has not been disabled b# other software %such as (irus protection or web user securit#
pac!ages& running on #our computer
Wired or Wireless NIC +'t(ernet or Wi,Fi Adapter-
$n# computer that uses the router should be euipped with an thernet or 1i-i adapter %:'+& 'f
#our computer is not euipped with such a de(ice" install an thernet or 1i-i adapter prior to using
the routerWireless Connection
1ireless wor!stations from #our networ! should be euipped with a wireless 0244b" g" or n :'+
%1i-i adapter& 'n addition" #ou should specif# the (alues of SS'D" channel number and securit#
settings defined in the web-based interface of the router for all these wireless wor!stations
$S% Mode"
To connect to the . .S3 or +D3$ networ!" #ou should use a . US, modem +onnect it to the
US, port of the router" then access the web-based interface of the router" and #ou will be able to
configure connection to the 'nternet5
!
;our US, modem should be euipped with an acti(e identification card %S'3 or
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
15/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Connecting to PC
PC with Ethernet Adapter4 3a!e sure that #our *+ is powered off
2 +onnect an thernet cable between an# of four thernet ports located on the bac! panel of
the router and the thernet port of #our *+
%o connect &ia 3G net'ork(connect #our US, modem to the US, portElocated on the bac!
panel of the router
!'f #ou need to connect or change a US, modem to another one when the router is powered
on" power off the de(ice" connect the modem to the US, port" and power on the router
6 %o connect the router to a )!* line(connect a phone cable between the DSL port of the
router and the ADSL )$Tport of the splitter +onnect #our phone to the P.)N'port of
the splitter Then connect another phone cable between a phone Cac! and the ADSL INport
of the splitter
5 %o connect the router to an +thernet line(connect the thernet cable between an# of four
thernet ports located on the bac! panel of the router and the thernet line
E +onnect the power cord to the power connector port on the bac! panel of the router" then
plug the power adapter into an electrical outlet or power strip7 Turn on the router b# pressing the )N/)FFbutton on its bac! panel
Turn on #our *+ and wait until #our operating s#stem is completel# loaded
E 't is recommended to use a US, extension cable to connect a US, modem to the router
Pae 15o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
16/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Obtaining IP Address Automatically in OS Windows P
4 +lic! the Start button and proceed to the Control !anel 8 &et.or9 and Internet
Connections 8 &et.or9 Connectionswindow
2 'n the &et.or9 Connectionswindow" right-clic! the rele(ant Local rea Connection
icon and select the !ro*ertiesline in the menu displa#ed
Figure 3. The Netork Connectionswindow.
Pae 1o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
17/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
'n the Local rea Connection !ro*erties window" on the :eneral tab" select the
Internet !rotocol ;"C!I!< line +lic! the !ro*ertiesbutton
Figure 4. The !ocal Area Connection Propertieswindow.
Pae 17o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
18/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
6 Select the '=tain an I! address auto)atically and '=tain D&S serer address
auto)aticallyradio buttons +lic! the '>button
Figure 5. The Internet Protocol "#CP$IP% Properties window.
5 +lic! the ?@button in the connection properties window
:ow #our computer is configured to obtain an '* address automaticall#
Pae 1o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
19/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Obtaining IP Address Automatically in OS Windows !
4 +lic! the Startbutton and proceed to the Control !anelwindow
2 Select the &et.or9 and S+arin, Center section %'f the +ontrol *anel has the categor#(iew %the Cate,ory (alue is selected from the /ie. =y drop-down list in the top right
corner of the window&" choose the /ie. net.or9 status and tas9s line under the
&et.or9 and Internet section&
Figure 6. The Control Panelwindow.
Pae 1o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
20/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
'n the menu located on the left part of the window" select the C+an,e ada*ter settin,s
line
Figure 7. The Netork and Så Centerwindow.
Pae 20o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
21/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
6 'n the opened window" right-clic! the rele(ant Local rea Connectionicon and select
the !ro*ertiesline in the menu displa#ed
Figure . The Netork Connectionswindow.
Pae 21o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
22/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
5 'n the Local rea Connection !ro*erties window" on the &et.or9in,tab" select the
Internet !rotocol /ersion 4 ;"C!I!4
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
23/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
E Select the'=tain an I! address auto)atically and '=tain D&S serer address
auto)atically radio buttons +lic! the '>button
Figure 1". The Internet Protocol 'ersion ( "#CP$IPv(% Properties window.
7 +lic! the '>button in the connection properties window
:ow #our computer is configured to obtain an '* address automaticall#
Pae 23o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
24/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
PC with Wi"Fi Adapter
4 %o connect &ia 3G net'ork( connect #our US, modem to the US, port7located on the bac!
panel of the router
!'f #ou need to connect or change a US, modem to another one when the router is powered
on" power off the de(ice" connect the modem to the US, port" and power on the router
2 %o connect the router to a )!* line(connect a phone cable between the DSL port of the
router and the ADSL )$Tport of the splitter +onnect #our phone to the P.)N'port of
the splitter Then connect another phone cable between a phone Cac! and the ADSL INport
of the splitter
%o connect the router to an +thernet line(connect the thernet cable between an# of four
thernet ports located on the bac! panel of the router and the thernet line
6 +onnect the power cord to the power connector port on the bac! panel of the router" then
plug the power adapter into an electrical outlet or power strip
5 Turn on the router b# pressing the )N/)FFbutton on its bac! panel
E Turn on 1i-i b# pressing the rele(ant button on the bac! panel of the router
7 Turn on #our *+ and wait until #our operating s#stem is completel# loaded
Turn on #our 1i-i adapter $s a rule" modern noteboo!s with built-in wireless :'+s are
euipped with a button or switch that turns on/off the wireless adapter %refer to #our *+documents& 'f #our *+ is euipped with a pluggable wireless :'+" install the software
pro(ided with #our 1i-i adapter
7 't is recommended to use a US, extension cable to connect a US, modem to the router
Pae 24o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
25/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Con#iguring Wi"Fi Adapter in OS Windows P
4 +lic! the Start button and proceed to the Control !anel 8 &et.or9 and Internet
Connections 8 &et.or9 Connectionswindow
2 Select the icon of the wireless networ! connection and ma!e sure that #our 1i-i adapter is
on
Figure 11. The Netork Connectionswindow.
Search for a(ailable wireless networ!s6 'n the opened ireless &et.or9 Connectionwindow" select the wireless networ! DS+
253and clic! the Connectbutton
$fter that the ireless &et.or9 Connection Statuswindow appears
!'f #ou perform initial configuration of the router (ia 1i-i connection" note that
immediatel# after changing the wireless default settings of the router #ou will need to
reconfigure the wireless connection using the newl# specified settings
Pae 25o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
26/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Con#iguring Wi"Fi Adapter in OS Windows !
4 +lic! the Startbutton and proceed to the Control !anelwindow
2 Select the &et.or9 and S+arin, Center section %'f the +ontrol *anel has the categor#(iew %the Cate,ory (alue is selected from the /ie. =ydrop-down list in the top right
corner of the window&" choose the /ie. net.or9 status and tas9s line under the
&et.or9 and Internet section&
Figure 12. The Control Panelwindow.
'n the menu located on the left part of the window" select the C+an,e ada*ter settin,s
line
6 'n the opened window" select the icon of the wireless networ! connection and ma!e sure that#our 1i-i adapter is on
5 To open the list of a(ailable wireless networ!s" select the icon of the wireless networ!
connection and clic! the Connect "o button or left-clic! the networ! icon in the
notification area located on the right side of the tas!bar
Figure 13. The noti#ication area o# the ta$k%ar.
Pae 2o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
27/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
E 'n the opened window" in the list of a(ailable wireless networ!s" select the wireless networ!
DS+253and clic! the Connectbutton
Figure 14. The li$t o# availa%le network$.
7 1ait for about 20-0 seconds $fter the connection is established" the networ! icon will be
displa#ed as the signal le(el scale
!'f #ou perform initial configuration of the router (ia 1i-i connection" note that
immediatel# after changing the wireless default settings of the router #ou will need to
reconfigure the wireless connection using the newl# specified settings
Pae 27o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
28/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Connecting to )e+ased Interface
1hen #ou ha(e configured #our computer" #ou can access the web-based interface and configure
needed parameters %for example" create an interface to connect to the 'nternet" change theparameters of the wireless networ!" specif# the settings of the firewall" edit the password for the
administrator account" etc&
4 Start a web browser %see theBefore You Beginsection" page 46&
2 'n the address bar of the web browser" enter the '* address of the router %b# default" the
following '* address is specified8 12.16,.1.1& *ress the 'nter!e#
Figure 15. &onnecting to the we%'%a$ed inter#ace o# the (S)'275"* device.
Fn the opened page" enter the username %login& and password for the administrator account
%b# default" the following username and password are specified8 admin" admin& Then
clic! the #nterlin!
Figure 16. The login page.
!'f the error JThe page cannot be displayedK %or JUnable to display the pageK/J Could not
connect to remote serverK& occurs upon connecting to the web-based interface of the router"
ma!e sure that #ou ha(e properl# connected the router to #our computer
!or securit# reasons" it is strongl# recommended to change the administrator password
upon initial configuration of the router To do this" clic! the ConAi,ure )anually button
and proceed to the Syste) d)inistrator *ass.ordpage
Pae 2o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
29/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
$fter successful registration the router)s uic! settings page opens
Figure 17. The +uick $etting$ page.
To configure connection to the 'nternet" clic! the Connect to internetbutton $fter clic!ing the
button" the 'nternet Setup 1i9ard opens %see theInternet !etup ,i-ardsection" page&
To configure access from the 'nternet to a web ser(er located in #our L$:" clic! the Host site
button $fter clic!ing the button" the Site Setup 1i9ard opens %see the !ite !etup ,i-ard section"
page 50&
To configure the router)s wireless networ!" clic! the ConAi,ure i-6ibutton $fter clic!ing the
button" the 1i-i Setup 1i9ard opens %see the ,i./i !etup ,i-ardsection" page 54&
To get bac! to the uic! settings page from an# 1i9ard or web-based interface menu section" left-
clic! the D-Lin! logo in the top left corner of the page
To configure all parameters of the router independentl# without the 1i9ards" clic! the ConAi,ure
)anuallybutton
Pae 2o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
30/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
31/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
The web-based interface of the router is multilingual Select a needed language from the menu
displa#ed when the mouse pointer is o(er the Lan,ua,ecaption ;ou can change the language of
the web-based interface in an# menu item
Figure 1!. &hanging the language o# the we%'%a$ed inter#ace.
$fter selecting the language" the notification on unsa(ed changes will be displa#ed +lic! the Sae
button to sa(e the current language of the web-based interface as the default language
Pae 31o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
32/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Installation and Connection
Saving and ,estoring Settings
!:ote that #ou should regularl# sa(e the changes of the router)s settings to the non-
(olatile memor#
The router)s web-based interface displa#s the notification on unsa(ed changes at the top of the page
Figure 2". The noti#ication on un$aved change$.
;ou can sa(e the router)s settings (ia the top-page menu displa#ed when the mouse pointer is o(er
the Syste)caption
Figure 21. The top'page -enu.
+lic! the $e=ootline if #ou ha(e alread# sa(ed the router)s settings
+lic! the SaeB$e=ootline to sa(e new settings and immediatel# reboot the router
+lic! the Saeline to sa(e new settings to the non-(olatile memor# and continue configuring the
de(ice $lso #ou can sa(e the de(ice)s parameters (ia the Sae button on the Syste)
ConAi,urationpage
+lic! the ac9u*line and follow the dialog box appeared to sa(e the configuration %all settings of
the router& to #our *+ $lso #ou can sa(e the router)s configuration to #our *+ (ia the ac9u*
button on the Syste) ConAi,urationpage
+lic! the 6actoryline to restore the factor# default settings $lso #ou can restore the factor#
defaults (ia the 6actorybutton on the Syste) ConAi,urationpage
$lso #ou can restore the factor# default settings (ia the hardware 'S'Tbutton located on the
bottom panel of the router Use a small paperclip to acti(ate the button insert it into the hole %with
the de(ice turned on&" push" and hold for 40 seconds
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
33/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
CH!"#$ 4% C'&6I:U$I&: /I #-S#D
I&"#$6C#
)i-ards
Internet Setup Wi$ard
To configure connection to the 'nternet" clic! the Connect to internetbutton
Figure 22. &on#iguring connection to the nternet.
To create a new 1$: connection" clic! the add ne. connectionlin!
Figure 23. The page #or $electing a 3/ network operator.
Fn the opened page" from the !roiderdrop-down list" select #our countr# and operator if #ou are
going to configure a . networ! connection" or lea(e the Manually(alue" if #ou are going to
configure a wired 1$: connection or #ou want to specif# all settings for #our . 1$: connection
independentl#
+lic! the &e(tbutton to continue
Pae 33o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
34/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Figure 24. The page #or $electing the connection t,pe.
Fn the opened page" select the needed choice of the radio button and clic! the &e(tbutton
Pae 34o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
35/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
PPPo. or PPPoA Connection
Figure 25. &on#iguring 000o N connection.
'n the &a)efield" specif# a name for the connection for easier identification and clic! the &e(t
button
Figure 26. &on#iguring 000o N connection.
'n the /!Ifield" specif# the *' 'n the /CIfield" specif# the +'
rom the #nca*sulation Modedrop-down list" select a method of encapsulation
'n the Userna)efield" enter #our login" and in the !ass.ordand !ass.ord conAir)ation
fields M the password pro(ided b# #our 'S*
Pae 35o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
36/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
'f authori9ation is not reuired" select the it+out aut+oriationchec!box
'f needed" specif# additional settings for #our ***o or ***o$ 1$: connection
Figure 27. &on#iguring 000o N connection.
!ara)eter Descri*tion
Serice na)eDisplayed for the PPPo.type only.
The name of the ***o authentication ser(er
ut+entication
al,orit+)
Select a reuired authentication method from the drop-down list or
lea(e the U"'(alue
M"U The maximum si9e of units transmitted b# the interface
Pae 3o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
37/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
>ee* lie
Select the chec!box if #ou want the router to !eep #ou connected to
#our 'S* e(en when the connection has been inacti(e for a specified
period of time 1hen the chec!box is selected" the LC! interal
and LC! Aailsfields are a(ailable Specif# the reuired (alues
Dial on de)and
Select the chec!box if #ou want the router to establish connection to
the 'nternet on demand 'n the Ma(i)u) idle ti)efield" specif# a
period of inacti(it# %in seconds& after which the connection should
be terminated
!!! I! e(tensionThis option is used b# some 'S*s +ontact #our 'S* to clarif# if this
chec!box needs to be enabled
Use Static I! ddress
Select the chec!box if #ou want to use a static '* address to access
the 'nternet 'n the Static I! ddress field displa#ed when the
chec!box is selected" specif# a static '* address
!!! de=u,Select the chec!box if #ou want to log all data on *** connection
debugging
!!!o# *ass t+rou,+
Displayed for the PPPo.type only.
Select the chec!box if #ou want to allow ***o clients of
computers from #our L$: to connect to the 'nternet through this
***o connection of the router
+lic! the &e(tbutton to continue
'f needed" change the connection settings a(ailable in the Miscellaneoussection
Figure 2. &on#iguring 000o N connection.
Pae 37o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
38/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external
networ! %eg (ideo streaming& to be recei(ed
&"Select the chec!box if #ou want one 1$: '* address to be used for
all computers of #our L$:
6ire.allSelect the chec!box to enable protection against $
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
39/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
IPoA or Static IP Connection
Figure 3". &on#iguring Static 0 N connection.
'n the &a)efield" specif# a name for the connection for easier identification and clic! the &e(t
button
Figure 31. &on#iguring Static 0 N connection.
'n the /!Ifield" specif# the *' 'n the /CIfield" specif# the +'
rom the #nca*sulation Modedrop-down list" select a method of encapsulation
ill in the I! addressand &et)as9fields'n the :ate.ay I! address field" enter the '* address of the gatewa# used b# this 1$:
connection
Pae 3o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
40/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
+lic! the &e(tbutton to continue
'f needed" change the connection settings a(ailable in the Miscellaneoussection
Figure 32. &on#iguring Static 0 N connection.
!ara)eter Descri*tion
#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external
networ! %eg (ideo streaming& to be recei(ed
&"Select the chec!box if #ou want one 1$: '* address to be used for
all computers of #our L$:
6ire.allSelect the chec!box to enable protection against $
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
41/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
llo. to create seeral
connections assi,ned
to t+is *ort
Select the chec!box to allow the router to use se(eral untagged
connections
Use /L&Select the chec!box to allow the router to use tagged L$:
connections
/L& ID$n identifier for the L$: The field is displa#ed when the Use
/L&chec!box is selected
/L& *riority$ priorit# tag for the t#pe of traffic transmitted The field is
displa#ed when the Use /L&chec!box is selected
+lic! the &e(tbutton to continue
$fter that the page displa#ing all specified settings opens +lic! the Saebutton to create the
connection or the ac9button to specif# other settings
$fter clic!ing the Saebutton" the uic! settings page opens
Pae 41o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
42/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Dynamic IP Connection
Figure 34. &on#iguring (,na-ic 0 N connection.
'n the &a)efield" specif# a name for the connection for easier identification and clic! the &e(t
button
Figure 35. &on#iguring (,na-ic 0 N connection.
'n the /!I" specif# the *' 'n the /CIfield" specif# the +'
rom the #nca*sulation Modedrop-down list" select a method of encapsulation
'f #our 'S* has pro(ided its identifier" fill in the /endor ID field
+lic! the &e(tbutton to continue
Pae 42o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
43/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
'f needed" change the connection settings a(ailable in the Miscellaneoussection
Figure 36. &on#iguring (,na-ic 0 N connection.
!ara)eter Descri*tion
#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external
networ! %eg (ideo streaming& to be recei(ed
&"Select the chec!box if #ou want one 1$: '* address to be used for
all computers of #our L$:
6ire.allSelect the chec!box to enable protection against $
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
44/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
45/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Bridge Connection
Figure 3. &on#iguring Bridge N connection.
'n the &a)efield" specif# a name for the connection for easier identification and clic! the &e(t
button
Figure 3!. &on#iguring Bridge N connection.
'n the /!Ifield" specif# the *' 'n the /CIfield" specif# the +'
rom the #nca*sulation Modedrop-down list" select a method of encapsulation
+lic! the &e(tbutton to continue
Pae 45o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
46/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
'f needed" change the connection settings a(ailable in the /L§ion
Figure 4". &on#iguring Bridge N connection.
!ara)eter Descri*tion
llo. to create seeral
connections assi,ned
to t+is *ort
Select the chec!box to allow the router to use se(eral untagged
connections
Use /L&Select the chec!box to allow the router to use tagged L$:
connections
/L& ID
$n identifier for the L$: The field is displa#ed when the Use
/L&chec!box is selected
/L& *riority$ priorit# tag for the t#pe of traffic transmitted The field is
displa#ed when the Use /L&chec!box is selected
+lic! the &e(tbutton to continue
$fter that the page displa#ing all specified settings opens +lic! the Saebutton to create the
connection or the ac9button to specif# other settings
$fter clic!ing the Saebutton" the uic! settings page opens
Pae 4o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
47/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
48/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
'n the Modedrop-down list" lea(e the auto(alue in order to let the router connect automaticall# to
an a(ailable t#pe of networ!" or select a needed (alue from the drop-down list For !" U!#
modems only
'n the Userna)efield" enter #our login" and in the !ass.ordand !ass.ord conAir)ationfields M the password pro(ided b# #our . operator
'f authori9ation is not reuired" select the it+out aut+oriationchec!box
'n the !& field" enter the access point name" and in the Dial nu)=erfield" enter the number
dialed to connect to the authori9ation ser(er of the operator
'f needed" specif# additional settings for #our . 1$: connection
!ara)eter Descri*tion
ut+entication
al,orit+)
Select a reuired authentication method from the drop-down list or
lea(e the U"'(alue
M"U The maximum si9e of units transmitted b# the interface $ptional
>ee* lie
Select the chec!box if #ou want the router to !eep #ou connected to
the networ! of #our operator e(en when the connection has been
inacti(e for a specified period of time 1hen the chec!box is
selected" the LC! interal and LC! Aails fields are a(ailable
Specif# the reuired (alues
Dial on de)and
Select the chec!box if #ou want the router to establish connection to
the 'nternet on demand 'n the Ma(i)u) idle ti)efield" specif# a
period of inacti(it# %in seconds& after which the connection should
be terminated
!!! de=u,Select the chec!box if #ou want to log all data on *** connection
debugging
+lic! the &e(tbutton to continue
Figure 43. &on#iguring 3/ N connection.
Pae 4o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
49/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
50/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Site Setup Wi$ard
To create a (irtual ser(er for redirecting incoming 'nternet traffic to a specified '* address in the
L$:" clic! the Host sitebutton
Figure 44. The page #or adding a virtual $erver.
Fn the opened page" #ou can specif# the following parameters8
!ara)eter Descri*tion
&a)enter a name for the (irtual ser(er for easier identification ;ou can
specif# an# name
InterAaceSelect a 1$: connection to which this (irtual ser(er will be
assigned
!riate I!
nter the '* address of the ser(er from the local area networ! To
choose a de(ice connected to the router)s L$: at the moment" select
the rele(ant (alue from the drop-down list located to the right of the
!riate I! field %the field will be filled in automaticall#&
$e)ote I! nter the '* address of the ser(er from the external networ!
1hen needed settings are configured" clic! the Saebutton $fter that #ou get to the uic! settings
page
Pae 50o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
51/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Wi"Fi Setup Wi$ard
To specif# all needed settings for #our wireless networ!" clic! the ConAi,ure i-6ibutton
Figure 45. The page #or ena%lingdi$a%ling the wirele$$ )N.
Fn the opened page" in the Co))on settin,ssection" select the #na=le irelesschec!box %if
it was deselected before& to enable 1i-i connections
+lic! the &e(tbutton to continue
'n the asic settin,ssection" #ou can change the basic parameters of #our router)s 1L$:8
JhideK #our wireless networ! %Hide ccess !oint&" specif# a name for the networ! %SSID&"
select #our location %Country& and the wireless channel number %C+annel&" isolate users of #our
1L$: from each other %Clients Isolation&" and enable the guest part of #our 1L$: %#na=le
ireless :uest &et.or9& and change its name %:uest SSID&
Figure 46. Ba$ic $etting$ o# the wirele$$ )N.
+lic! the &e(tbutton to continue
Pae 51o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
52/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
53/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
1hen the '*en(alue is selected" the #! #ncry*tion settin,ssection is displa#ed8
Figure 4. The 0penvalue i$ $elected #ro- the Netork Aut&enticationdrop'down li$t.
!ara)eter Descri*tion
#na=le #ncry*tion #!
The chec!box acti(ating 1* encr#ption 1hen the chec!box is
selected" the #ncry*tion >ey #! ;1ey #! as H#chec!box are displa#ed
#ncry*tion >ey #!
as H#
Select the chec!box to set a hexadecimal number as a !e# for
encr#ption
#ncry*tion >ey #! ;1ey !S>$ !e# for 1*$ encr#ption The !e# can contain digits and/or Latin
characters
!2 !re-
aut+entication
The chec!box acti(ating preliminar# authentication %displa#ed onl#
for the !2-!S>authentication t#pe&
! #ncry*tion $n encr#ption method8 ">I!" #S" or ">I!E#S
! rene.al
The time period %in seconds&" at the end of which a new !e# for 1*$
encr#ption is generated 1hen the (alue is specified for this field"
the !e# is not renewed
+lic! the &e(tbutton to continue
1hen all the steps of configuring the 1L$: are completed" the specified settings are displa#ed on
the page +hec! their correctness and then clic! the Saebutton $fter that #ou get to the uic!
settings page
Pae 54o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
55/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Status
The pages of this section displa# data on the current state of the router8
networ! statistics
DSL connection status
acti(e 1$: connections
'* addresses leased b# the DH+* ser(er
the routing table
data on de(ices connected to the router)s networ! and its web-based interface
%etwork StatisticsFn the Status &et.or9 statisticspage" #ou can (iew statistics for all interfaces %connections&
existing in the s#stem or each connection the following data are displa#ed8 state" '* address"
subnet mas! and gatewa# %if the connection is established&" 3$+ address" 3TU (alue" and (olume
of data recei(ed and transmitted %with increase of the (olume the units of measurement are changed
automaticall#8 b#te" ?b#te" 3b#te" .b#te&
Figure 5". The Status $ Netork statisticspage.
Pae 55o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
56/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
&S' Status
The information shown on the tabs of the Status DSL status page can be used for
troubleshooting and diagnosing connection problems
Figure 51. The Status $ DS! statuspage.
Pae 5o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
57/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
WA% Status
The Status & statuspage displa#s acti(e 1$: connections
Figure 52. The Status $ )AN statuspage.
Pae 57o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
58/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
&(CP
The Status DHC! page displa#s the information on computers that ha(e been identified b#
hostnames and 3$+ addresses and ha(e got '* addresses from the DH+* ser(er of the de(ice" aswell as the '* address expiration periods %the lease time&
Figure 53. The Status $ D3CPpage.
Pae 5o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
59/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
)outing *able
The Status $outin, ta=le page displa#s the information on routes The table contains
destination '* addresses" gatewa#s" subnet mas!s" and other data
Figure 54. The Status $ ,outing talepage.
Pae 5o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
60/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
'A% Clients
Fn the Status L& clientspage" #ou can (iew data on networ! de(ices connected to the router
The page displa#s de(ices connected to the wireless networ! of the router" de(ices connected to thebuilt-in switch of the router" and de(ices accessing the web-based interface of the router
Figure 55. The Status $ !AN clientspage.
or each de(ice the following data are displa#ed8 the '* address" the 3$+ address" and the
interface to which the de(ice is connected
Pae 0o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
61/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Net
'n this menu #ou can configure basic parameters of the router)s local area networ! and configure
connection to the 'nternet %a 1$: connection&
WA%
Fn the &et &page" #ou can create and edit connections used b# the router
Figure 56. The Net $ )ANpage.
To create a new connection" clic! the ddbutton Fn the page displa#ed" specif# the rele(ant
(alues
To edit an existing connection" left-clic! the rele(ant line in the table Fn the page displa#ed"
change the parameters and clic! the Saebutton
To delete an existing connection" left-clic! the rele(ant line in the table Fn the page displa#ed"
clic! the Deletebutton
To use one of existing 1$: connections as a default gatewa#" select the choice of the DeAault
,ate.ayradio button located in the line corresponding to this connection
See an example of creating se(eral connections in the Creating %'o Connections on ne Channel
section" page 45
Pae 1o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
62/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Creating ADS! )AN Connection
Figure 57. The page #or creating a new connection. The General settingsA#4and '!AN$ection$.
Pae 2o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
63/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
64/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
sent in an effort to minimi9e lag or Citter caused b# traffic
inconsistencies 1hen #ou select this (alue from the drop-down list"
the !ea9 Cell $atefield is displa#ed Specif# a reuired (alue %in
cells per second&
C$
%Constant #it %ate&8 This ser(ice is used for applications that
reuire a constant data rate 't is mostl# used for transferring
uncompressed audio and (ideo" eg (ideoconferencing" interacti(e
audio %telephon#&" audio/(ideo distribution %tele(ision" distance
education" e-shops&" and retrie(al %(ideo-on demand" audio
libraries& 1hen #ou select this (alue from the drop-down list" the!ea9 Cell $ate field is displa#ed Specif# a reuired (alue %in
cells per second&
&on $ealti)e /$
%Non'%eal'time (ariable #it %ate&8 This ser(ice can be used for
transferring data that ha(e critical response-time reuirements" eg
air tic!et boo!ing" ban! transactions" and process monitoring 1hen
#ou select this (alue from the drop-down list" the !ea9 Cell $ate"
Sustaina=le Cell $ate" and Ma(i)u) urst Sie fields are
displa#ed Specif# reuired (alues
$ealti)e /$
%%eal'time (ariable #it %ate&8 This ser(ice is used for dela#-
sensiti(e applications such as real time (ideo The
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
65/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
/L& ID$n identifier for the L$: The field is displa#ed when the Use
/L&chec!box is selected
/L& *riority$ priorit# tag for the t#pe of traffic transmitted The field is
displa#ed when the Use /L&chec!box is selected
The Miscellaneous section is displa#ed for all connection t#pes except for rid,e
Figure 5. The page #or creating a new connection. The 4iscellaneous $ection.
!ara)eter Descri*tion
Miscellaneous
#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external
networ! %eg (ideo streaming& to be recei(ed
&"Select the chec!box if #ou want one 1$: '* address to be used for
all computers of #our L$:
6ire.allSelect the chec!box to enable protection against $
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
66/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
The !!! section is displa#ed for the !!!o#and !!!oconnection t#pes
Figure 5!. The page #or creating a new connection. The PPP$ection.
!ara)eter Descri*tion
!!!
Userna)e $ username %login& to access the 'nternet
it+out aut+oriationSelect the chec!box if #ou don)t need to enter a username and
password to access the 'nternet
!ass.ord $ password to access the 'nternet
!ass.ord conAir)ation The confirmation of the entered password %to a(oid mist#pes&
Serice na)eDisplayed for the PPPo.type only.
The name of the ***o authentication ser(er
ut+entication
al,orit+)
Select a reuired authentication method from the drop-down list or
lea(e the U"' (alue
M"U The maximum si9e of units transmitted b# the interface
>ee* lie
Select the chec!box if #ou want the router to !eep #ou connected to
#our 'S* e(en when the connection has been inacti(e for a specified
period of time 1hen the chec!box is selected" the LC! interal
and LC! Aailsfields are a(ailable Specif# the reuired (alues
Pae o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
67/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
Dial on de)and
Select the chec!box if #ou want the router to establish connection to
the 'nternet on demand 'n the Ma(i)u) idle ti)efield" specif# a
period of inacti(it# %in seconds& after which the connection should
be terminated
!!! I! e(tensionThis option is used b# some 'S*s +ontact #our 'S* to clarif# if this
chec!box needs to be enabled
Use Static I! ddress
Select the chec!box if #ou want to use a static '* address to access
the 'nternet 'n the Static I! ddress field displa#ed when the
chec!box is selected" specif# a static '* address
!!! de=u, Select the chec!box if #ou want to log all data on *** connectiondebugging
!!!o# *ass t+rou,+
Displayed for the PPPo.type only.
Select the chec!box if #ou want to allow ***o clients of
computers from #our L$: to connect to the 'nternet through this
***o connection of the router
The I!section is displa#ed for the Static I!" Dyna)ic I!and I!oconnection t#pes
Figure 6". The page #or creating a new connection. The IP$ection.
!ara)eter Descri*tion
I!
I! ddress Displayed for the Static IPand IPoAtypes only.nter an '* address for this 1$: connection
&et)as9Displayed for the Static IPand IPoAtypes only.
nter a subnet mas! for this 1$: connection
:ate.ay I! ddressDisplayed for the Static IPand IPoAtypes only.
nter an '* address of the gatewa# used b# this 1$: connection
/endor ID
Displayed for the Dynamic IPtype only.
The identifier of #our 'S* $ptional
1hen all needed settings are configured" clic! the Saebutton
Pae 7o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
68/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Creating .t&ernet )AN Connection
*rior to creating an thernet 1$: connection" specif# a L$: port that will be used as the 1$:
port %see theInterface Groupingsection" page A5&
Figure 61. The page #or creating a new connection. The General settings and .t&ernet$ection$.
!ara)eter Descri*tion
:eneral settin,s
!roider Lea(e the Manually(alue
Connection "y*e
$ t#pe of networ! protocol to be used b# the connection $(ailable
(alues8
!!!o#
Static I!
Dyna)ic I!
rid,e
!ortSelect the (alue corresponding to the L$: port specified as the
1$: port
&a)e $ name for connection for easier identification
#na=le Select the chec!box to enable the connection
Direction The direction of this connection
#t+ernet
M"U The maximum si9e of units transmitted b# the interface
MC $ 3$+ address assigned to the interface
Pae o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
69/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
/L&
%The section is displa#ed" if the /L& MU Modechoice of the #t+ernet & ty*eradiobutton is selected on the danced InterAace ,rou*in,page&
llo. to create seeral
connections assi,ned
to t+is *ort
'f the chec!box is selected" the router is able to use se(eral untagged
connections
Use /L&'f the chec!box selected" the router is able to use tagged L$:
connections
/L& ID
$n identifier for the L$: The field is displa#ed when the Use
/L&chec!box is selected
/L& *riority$ priorit# tag for the t#pe of traffic transmitted The field is
displa#ed when the Use /L&chec!box is selected
The Miscellaneous section is displa#ed for all connection t#pes except for rid,e
Figure 62. The page #or creating a new connection. The 4iscellaneous $ection.
!ara)eter Descri*tion
Miscellaneous
#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external
networ! %eg (ideo streaming& to be recei(ed
&"Select the chec!box if #ou want one 1$: '* address to be used for
all computers of #our L$:
6ire.allSelect the chec!box to enable protection against $
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
70/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
The !!! section is displa#ed for the !!!o#connection t#pe
Figure 63. The page #or creating a new connection. The PPP $ection.
!ara)eter Descri*tion
!!!
Userna)e $ username %login& to access the 'nternet
it+out aut+oriationSelect the chec!box if #ou don)t need to enter a username and
password to access the 'nternet
!ass.ord $ password to access the 'nternet
!ass.ord conAir)ation The confirmation of the entered password %to a(oid mist#pes&
Serice na)e The name of the ***o authentication ser(er
ut+entication
al,orit+)
Select a reuired authentication method from the drop-down list or
lea(e the U"' (alue
M"U The maximum si9e of units transmitted b# the interface
>ee* lie
Select the chec!box if #ou want the router to !eep #ou connected to
#our 'S* e(en when the connection has been inacti(e for a specified
period of time 1hen the chec!box is selected" the LC! interal
and LC! Aailsfields are a(ailable Specif# the reuired (alues
Pae 70o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
71/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
Dial on de)and
Select the chec!box if #ou want the router to establish connection to
the 'nternet on demand 'n the Ma(i)u) idle ti)efield" specif# a
period of inacti(it# %in seconds& after which the connection should
be terminated
!!! I! e(tensionThis option is used b# some 'S*s +ontact #our 'S* to clarif# if this
chec!box needs to be enabled
Use Static I! ddress
Select the chec!box if #ou want to use a static '* address to access
the 'nternet 'n the Static I! ddress field displa#ed when the
chec!box is selected" specif# a static '* address
!!! de=u, Select the chec!box if #ou want to log all data on *** connectiondebugging
!!!o# *ass t+rou,+
Select the chec!box if #ou want to allow ***o clients of
computers from #our L$: to connect to the 'nternet through this
***o connection of the router
The I!section is displa#ed for the Static I! and Dyna)ic I!connection t#pes
Figure 64. The page #or creating a new connection. The IP $ection.
!ara)eter Descri*tion
I!
I! ddressDisplayed for the Static IPtype only.
nter an '* address for this 1$: connection
&et)as9Displayed for the Static IPtype only.
nter a subnet mas! for this 1$: connection
:ate.ay I! ddressDisplayed for the Static IPtype only.
nter an '* address of the gatewa# used b# this 1$: connection
/endor IDDisplayed for the Dynamic IPtype only.
The identifier of #our 'S* $ptional
1hen all needed settings are configured" clic! the Saebutton
Pae 71o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
72/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Creating /G )AN Connection
'f the *': code chec! is enabled for the S'3 card inserted into #our US, modem" then prior to
creating a . 1$: connection" proceed to the US )ode)menu and enter the *': code on thepage displa#ed %see the "!B #ode$ section" page 445& Then proceed to the &et &page"
clic! the ddbutton" and select the 3:(alue from the Connection "y*edrop-down list
Figure 65. The page #or creating a new connection. The General settingsand /G$ection$.
!ara)eter Descri*tion
:eneral settin,s
!roider
To automaticall# specif# all settings reuired to connect to the
'nternet" select #our countr# and operator from the drop-down list
To specif# all settings independentl#" lea(e the Manually(alue
!ort Select the us= (alue
&a)e $ name for connection for easier identification
#na=le Select the chec!box to enable the connection
Direction The direction of this connection
3:
Mode
The (alue of the field specifies the t#pe of the networ! to which the
router connects Lea(e the auto (alue to let the router connect
automaticall# to an a(ailable t#pe of networ!" or select a needed
(alue from the drop-down listFor !" U!# modems only
Pae 72o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
73/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Figure 66. The page #or creating a new connection. The PPP and4iscellaneous $ection$.
!ara)eter Descri*tion
!!!
Userna)e $ username %login& to connect to the networ! of the operator
it+out aut+oriation Select the chec!box if #our operator does not reuire authori9ation
!ass.ord $ password to connect to the networ! of the operator
!ass.ord conAir)ation The confirmation of the entered password %to a(oid mist#pes&
!& $n access point name
Dial nu)=er$ number dialed to connect to the authori9ation ser(er of the
operator
ut+entication
al,orit+)
Select a reuired authentication method from the drop-down list or
lea(e the U"'(alue
M"U The maximum si9e of units transmitted b# the interface $ptional
Pae 73o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
74/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
>ee* lie
Select the chec!box if #ou want the router to !eep #ou connected to
the networ! of #our operator e(en when the connection has been
inacti(e for a specified period of time 1hen the chec!box is
selected" the LC! interal and LC! Aails fields are a(ailable
Specif# the reuired (alues
Dial on de)and
Select the chec!box if #ou want the router to establish connection to
the 'nternet on demand 'n the Ma(i)u) idle ti)efield" specif# a
period of inacti(it# %in seconds& after which the connection should
be terminated
!!! de=u,
Select the chec!box if #ou want to log all data on *** connection
debugging
Miscellaneous
#na=le I:M! MulticastSelect the chec!box to allow multicast traffic from the external
networ! %eg (ideo streaming& to be recei(ed
&"Select the chec!box if #ou want one 1$: '* address to be used for
all computers of #our L$:
6ire.allSelect the chec!box to enable protection against $
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
75/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
76/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
To create a 3$+-'* pair" clic! the ddbutton and specif# the following parameters8
!ara)eter Descri*tion
I! address $n '* address which will be assigned to the de(ice with thespecified 3$+ address
MC address The 3$+ address of the de(ice from the L$:
1hen all needed 3$+-'* pairs are specified" clic! the Saebutton
xisting 3$+-'* pairs are displa#ed in the table of the Static DHC!section To remo(e a pair"
select the rele(ant line in the table and clic! the $e)oebutton Then clic! the Saebutton
'n the DHC! serersection" #ou can configure the built-in DH+* se(er of the router
!ara)eter Descri*tion
Mode
$n operating mode of the router)s DH+* ser(er
#na=le8 the router assigns '* addresses to clients automaticall# in
accordance with the specified parameters 1hen this (alue is
selected" the Start I!" #nd I!" and the Lease ti)e fields are
displa#ed on the page
Disa=le8 the router)s DH+* ser(er is disabled" clients) '* addresses
are assigned manuall#
$elay8 an external DH+* ser(er is used to assign '* addresses toclients 1hen this (alue is selected" the #(ternal DHC! serer I!
field is displa#ed on the page
Start I!The start '* address of the address pool used b# the DH+* ser(er to
distribute '* addresses to clients
#nd I!The end '* address of the address pool used b# the DH+* ser(er to
distribute '* addresses to clients
Lease ti)e
The lifetime of '* addresses leased b# the DH+* ser(er $t the end
of this period the leased '* address is re(o!ed and can be distributedto another de(ice" unless the pre(ious de(ice has confirmed the need
to !eep the address
#(ternal DHC! serer I!The '* address of the external DH+* ser(er which assigns '*
addresses to the router)s clients
1hen all needed settings are configured" clic! the Saebutton
Pae 7o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
77/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Watchdog
Fn the &et atc+do,page" #ou can enable the 1$: bac!up function" which pro(ides #ou with
uninterrupted access to the 'nternet 1hen #our main connection brea!s down" the router acti(atesthe bac!up connection and when the main channel is reco(ered" the router switches to it and
disconnects the reser(e one
Figure 6. The Net $ )atc&dogpage.
To acti(ate the bac!up function" on the &et &page" create the main 1$: connection and
enable it %select the #na=le chec!box on the page for creating the connection& Then create the
reser(e 1$: connection and disable it %deselect the #na=le chec!box on the page for creating the
connection& $fter that proceed to the &et atc+do,page" select the #na=le chec!box and
specif# the needed (alues in the fields displa#ed on the page
!ara)eter Descri*tion
"i)e Aro) t+e
=e,innin, oA t+eal,orit+) =eAore t+e
Airst decision
$ time period %in seconds& during which the router)s internal s#stem
anal#9es the main connection and ma!es a decision to enable/disable
the reser(e channel ,# default" the (alue 6 is specified
!ri)ary connection settin,s
Connection na)erom the drop-down list" select a 1$: connection which will be
used as the main one
Connection Guality leel
The minimum ualit# of the main connection when the router
considers the connection as acti(e *ossible (alues are from to
255 ,# default" the (alue %2 is specified
Pae 77o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
78/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
!ara)eter Descri*tion
I! address Aor c+ec9s$n '* address that the router will chec! for a(ailabilit# (ia '+3*
ping mechanism
"i)eout =et.een
connect atte)*ts
$ time period %in seconds& between attempts to establish the main
connection ,# default" the (alue 1 is specified
"i)e to try to connect$ time period %in seconds& for an attempt to establish the main
connection ,# default" the (alue 1 is specified
"i)eout Aor
disconnection
$ time period %in seconds& for an attempt to brea! the main
connection ,# default" the (alue is specified
$esere connection settin,s
Connection na)erom the drop-down list" select a 1$: connection which will be
used as the reser(e one
Connection Guality leel
The minimum ualit# of the reser(e connection when the router
considers the connection as acti(e *ossible (alues are from to
255 ,# default" the (alue %2 is specified
I! address Aor c+ec9s$n '* address that the router will chec! for a(ailabilit# (ia '+3*
ping mechanism
"i)eout =et.eenconnect atte)*ts
$ time period %in seconds& between attempts to establish the reser(econnection ,# default" the (alue 1 is specified
"i)e to try to connect$ time period %in seconds& for an attempt to establish the reser(e
connection ,# default" the (alue 1 is specified
"i)eout Aor
disconnection
$ time period %in seconds& for an attempt to brea! the reser(e
connection ,# default" the (alue is specified
1hen all needed settings are configured" clic! the C+an,ebutton
Pae 7o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
79/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
)i+5i
'n this menu #ou can specif# all needed settings for #our wireless networ!
Common settings
Fn the i-6i Co))on settin,s page" #ou can enable #our wireless local area networ!
%1L$:&
Figure 6!. The page #or ena%lingdi$a%ling the wirele$$ )N.
The #na=le irelesschec!box enables 1i-i connections ,# default" the chec!box is selected
'f #ou want to disable #our 1L$:" deselect the #na=le ireless chec!box and clic! the
C+an,ebutton
Pae 7o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
80/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Basic Settings
Fn the i-6i asic settin,spage" #ou can configure basic parameters of the router)s 1L$:
Figure 7". Ba$ic $etting$ o# the wirele$$ )N.
!ara)eter Descri*tion
Hide ccess !oint
'f the chec!box is selected" other users cannot see #our 1i-i
networ! %'t is recommended not to select this chec!box in order to
simplif# initial configuration of #our 1L$:&
SSID
$ name for the 1L$: ,# default" the (alue DS+253 is
specified 't is recommended to specif# another name for the
networ! upon initial configuration %use digits and Latin characters&
SSIDThe parameter that uniuel# identifies #our wireless networ! ;ou
cannot change the (alue of this parameter
Country The countr# #ou are in Select a (alue from the drop-down list
C+annel
The wireless channel number ,# default" channel E is specified 'f
#ou want to use another channel" select a (alue from the drop-down
list 1hen the auto(alue is selected" the router itself chooses the
channel with the least interference
Clients IsolationSelect the chec!box to isolate the users of #our 1L$: %to forbid
wireless clients to communicate to each other&
#na=le ireless :uest
&et.or9
Select the chec!box to create a separate part of #our 1L$: with
open authentication t#pe and with no password 1ireless de(ices
connected to this networ! can access the 'nternet" but are isolated
from the router)s L$:
:uest SSID $ name for the guest part of #our 1L$:
1hen #ou ha(e configured the parameters" clic! the C+an,ebutton
Pae 0o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
81/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Security Settings
Fn the i-6i Security settin,spage" #ou can modif# securit# settings of the 1L$:
Figure 71. The de#ault $ecurit, $etting$.
,# default" the '*ennetwor! authentication t#pe with no encr#ption is specified for the 1L$:
!The default securit# settings do not pro(ide sufficient protection for the 1L$: *lease"
specif# #our own securit# settings
The router supports the following authentication t#pes8
ut+entication ty*e Descri*tion
'*en Fpen authentication %with or without 1* encr#ption&
!-!S> 1*$-based authentication using a *S?
!2-!S> 1*$2-based authentication using a *S?
Pae 1o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
82/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
1hen the '*en (alue is selected" the #! #ncry*tion settin,ssection is displa#ed8
Figure 72. The 0penvalue i$ $elected #ro- the Netork Aut&enticationdrop'down li$t.
!ara)eter Descri*tion
#na=le #ncry*tion #!The chec!box acti(ating 1* encr#ption 1hen the chec!box isselected" the #ncry*tion >ey #! ;1ey #! as H#chec!box are displa#ed
#ncry*tion >ey #!
as H#
Select the chec!box to set a hexadecimal number as a !e# for
encr#ption
#ncry*tion >ey #! ;1ey !S>$ !e# for 1*$ encr#ption The !e# can contain digits and/or Latin
characters
!2 !re-
aut+entication
The chec!box acti(ating preliminar# authentication %displa#ed onl#
for the !2-!S>authentication t#pe&
! #ncry*tion $n encr#ption method8 ">I!" #S" or ">I!E#S
! rene.al
The time period %in seconds&" at the end of which a new !e# for
1*$ encr#ption is generated 1hen the (alue is specified for thisfield" the !e# is not renewed
1hen #ou ha(e configured the parameters" clic! the C+an,ebutton
Pae 3o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
84/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
85/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
To add a 3$+ address to which the selected filtering mode will be applied" proceed to the MC
addressestab
Figure 75. The ta% #or adding a & addre$$.
nter an address in the MC addressfield of the MC address addin,section" and clic! the
ddbutton
To add the 3$+ address of a de(ice connected to the router)s L$: at the moment" select the (alue
containing the 3$+ and '* address of this de(ice from the drop-down list located to the right of the
MC address field %the field will be filled in automaticall#& and clic! the ddbutton
To remo(e a 3$+ address from the list of 3$+ addresses" select the chec!box located to the right
of the rele(ant 3$+ address in the 3$+ address list section and clic! the Deletebutton
Pae 5o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
86/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
Station 'ist
Fn the i-6i Station Listpage" #ou can (iew the list of wireless de(ices connected to the router
Figure 76. The li$t o# the router$ wirele$$ client$.
To (iew the latest data on the de(ices connected to the 1L$:" clic! the $eAres+button
Pae o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
87/138
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
88/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
To acti(ate the 1*S function" select the !S #na=lechec!box and clic! the C+an,ebutton
1hen the chec!box is selected" the InAor)ation and Connectionsections are a(ailable on the
page
!ara)eter Descri*tion
!S Status
The state of the 1*S function8
ConAi,ured%all needed settings are specified&
UnconAi,ured%#ou need to specif# the rele(ant settings&
SSID The name of the router)s 1L$:
&et.or9 ut+entication The networ! authentication t#pe specified for the 1L$:
#ncry*tion The encr#ption t#pe specified for the 1L$:
Deice !I&The *': code of the router This parameter is used when connecting
the router to a registrar to set the parameters of the 1*S function
Client !I&The *': code of the de(ice newl# connected to the router (ia the
1*S function
!S Met+od
$ method of the 1*S function Select a (alue from the drop-down
list
!I&8 +onnecting the de(ice (ia the *': code
!C8 +onnecting the de(ice (ia the push button %actual or (irtual&
!I& Code
The *': code of the 1*S-enabled de(ice that needs to be connected
to the wireless networ! of the router
The field is displa#ed onl# when the !I&(alue is selected from the
!S Met+oddrop-down list
Connect+lic! the button to connect the wireless de(ice to the router)s 1L$:
(ia the 1*S function
Pae o! "3#
-
8/11/2019 DSL-2750UC1_User Manual_v.1.0.11_06.07.12_EN
89/138
DSL-2750U3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
ConAi,urin, ia e=-=ased InterAace
6sing )PS 5unction via )e+ased Interface
To add a wireless de(ice (ia the *': method of the 1*S function" follow the next steps8
4 Select the !S#na=le chec!box
2 +lic! the C+an,ebutton
Select the !I&(alue from the !SMet+oddrop-down list
6 Select the *': method in the software of the wireless de(ice that #ou want to connect to the
router)s 1L$:
5 +lic! the rele(ant button in the software of the wireless de(ice that #ou want to connect to
the 1L$:
E
-
8/11/2019 DSL-2750UC1_User M