dtc_adr 2500 extra ed5
TRANSCRIPT
-
SSAGEM ADR2500 eXtra
Product Description SAGEM ADR2500 eXtra
-
Abbreviations
Product Description SAGEM ADR2500 eXtra 1 s
EBER Excessive Bit Error Rate
ECC Embedded Communication Channel
EMC ElectroMagnetic Compatibility
ERO Optical Transceiver
ESD Electrostatic discharge
FTTB Fibber To The Building
FTTC/Ca Fibber To The Curb/Cabinet
HDB3 High Density Bipolar 3
ITU-T International Telecommunication Union - Telecommunications
LOF Loss Of Frame
LOS Loss Of Signal
LT (LCT) Local (Craft) Terminal
MMI Man-Machine Interface
MS-AIS Multiplexer Section - Alarm Indication Signal
NMS Network Management System
PABX Private Automatic Branch eXchange
POH Path OverHead
Rx Receiver
SD Signal Degrade
SDH Synchronous Digital Hierarchy
SF Signal Fail
SOH Section OverHead
STM-1 Synchronous Transport Module Level 1
STM-4 Synchronous Transport Module Level 4
STM-16 Synchronous Transport Module Level 16
TSIG Remote signalling input
TUG Tributary Unit Groups
Tx Transmitter
VC Virtual Container
-
Table of Contents
Product Description SAGEM ADR2500 eXtra 2 s
5th edition November 2004
1. INTRODUCTION ......................................................................................................................3
2. SDH Optical Multiplexers.......................................................................................................4
3. APPLICATIONS.......................................................................................................................53.1. Advantages .......................................................................................................................... 5Fiber optic access network .......................................................................................................... 63.2. Infrastructure network ........................................................................................................... 63.3. Private network..................................................................................................................... 63.4. Public utility company networks ............................................................................................. 63.5. Alternative to STM-64 ........................................................................................................... 73.6. Ethernet over SDH (EoS) ...................................................................................................... 7
4. FUNCTIONAL DESCRIPTION ................................................................................................94.1. Architecture.......................................................................................................................... 94.2. Common Units.................................................................................................................... 104.3. Aggregates......................................................................................................................... 104.4. Tributaries.......................................................................................................................... 114.5. Protections ......................................................................................................................... 124.6. Synchronisation.................................................................................................................. 134.7. Overhead ........................................................................................................................... 13
5. OPTICAL ENGINEERING......................................................................................................145.1. Optical link budget .............................................................................................................. 14
INSTALLATION ............................................................................................................................166.1. Mechanical installation ........................................................................................................ 166.2. Wiring ................................................................................................................................ 17
7. SUPERVISION/MAINTENANCE...........................................................................................187.1. Supervision ........................................................................................................................ 187.2. Maintenance....................................................................................................................... 20
8. SPECIFICATIONS..................................................................................................................228.1. Electrical and optical specifications ...................................................................................... 228.2. Supervisory interfaces......................................................................................................... 238.3. Mechanical specifications.................................................................................................... 238.4. Power supply...................................................................................................................... 238.5. consumption....................................................................................................................... 238.6. Environmental conditions..................................................................................................... 238.7. Guaranteed attenuation....................................................................................................... 24
-
INTRODUCTION
Product Description SAGEM ADR2500 eXtra 3 s
1. INTRODUCTIONSAGEM SA is providing a global SDH Solutionto its customers at STM-1, STM-4 and STM-16capacities, enabling to offer all different servicesfrom E1 up to 2,5 Gbps, including Fast Ethernetand Gigabit Ethernet.SAGEM solution is particularly compact,scalable and easy to operate, it is made ofADR155c that can operate at STM-1 and STM-4level and ADR2500c and ADR2500 eXtra thatcan operate at STM-4 and STM-16 level.
With its 64 VC4 High Order/Low Order Switch,SAGEM ADR2500 eXtra is a full connectivitySTM-16 Add-drop Multiplexer at VC4/VC4-4cVC4-16c/VC3/VC12 granularity with Data,PDH and SDH access.With its 32 VC4 High Order/Low Order Switch,SAGEM ADR2500 eXtra is a full connectivitySTM-4 Add-drop Multiplexer at VC4/VC4-4cVC4-16c/VC3/VC12 granularity with Data,PDH and SDH access.
The continuous increase of the traffic along withthe explosive growth of the Internet traffic bringthe necessity of high capacity networks. STM-16can be used in every layer of the Networkincluding Access and Metro area. Equipmentshall therefore be very compact in order to fitinto customer's premises and support all theirdata requirements.
Very flexible and compact, SAGEM ADR2500eXtra supports traditional TDM traffic throughSDH and PDH interfaces but is also optimisedfor data transport with for instance the GFP150eXtra unit which has a real Ethernet Switch andoffers all the Ethernet over SDH enhancedfeatures.It gives to all Ethernet interfaces the benefits ofSDH, maturity, protections, integration into anexisting network
The equipment is SNMP native and has anembedded HTTP server, SAGEM ADR2500eXtra is managed by SAGEM SDH NetworkManagement System, IONOS NMS (which alsomanages SAGEM ADR155C, SAGEMADR2500C and other products from SAGEMNetwork division).
-
SDH Optical Multiplexers
Product Description SAGEM ADR2500 eXtra 4 s
2. SDH Optical Multiplexers
SAGEM continues to develop its range ofcompact SDH Multiplexers designed for mixedVoice and Data access networks.
A common feature of those equipment is thecompatibility with the SDH networks (open topublic operator networks).
Moreover, the compactness of all our productsenables them to be located in customerspremises where power consumption andcluttering are important issues.Another common feature is transport of data inorder to offer real Multi service ProvisioningPlatforms.
SAGEM - ADR155C is an add-drop multiplexerthat can be used for creating ring networks at63x2 Mbps or 3x34/45 Mbps with Ethernet
10/100 and V.11 data interfaces.SAGEM-ADR2500c is an add-drop multiplexerthat allows to make rings or point to point STM-16 networks with E1, E3, DS3, STM-1, STM-4/STM-4c, STM-16/STM-16c and GigabitEthernet tributaries.
SAGEM-ADR2500 eXtra is an add-dropmultiplexer that allows to make rings or point topoint STM4 and STM-16 networks with E1, E3,DS3, Ethernet, Fast Ethernet, STM-1, STM-4/STM-4c, STM-16/STM-16c and GigabitEthernet tributaries.
Equipment have been made to perform complexring or meshed networks mixing voice and dataand benefiting from high quality fibber opticperformance and compatibility with publicnetworks.
STM-1STM-1
STM-16STM-16
StreetStreetcabinetcabinet
16 E1
Node B (UMTS) ou
BTS (GSM)
CompanyBuilding
MUX
Ethernet
Gig-Ethernet
-
APPLICATIONS
Product Description SAGEM ADR2500 eXtra 5 s
3. APPLICATIONS
3.1. ADVANTAGES
3.1.1. TRUE VOICE/DATA INTEGRATIONAND PROTECTION
SAGEM ADR2500 eXtra is compliant to SDHstandards and it is a versatile add-dropmultiplexer with a diversity of access (including 2Mbps, 34 Mbps, 45 Mbps, Ethernet, FastEthernet, 155 and 622 Mbps, evaluative to 2,48Gbps) with high quality of service (trafficprotection). From the LAN/WAN bridgetechnology, it can transport STM-4c and STM-16c with concatenation and Gig Ethernet.
3.1.2. HIGHLY PROTECTED EQUIPMENTSDH design of ADR2500 eXtra gives the benefitof standard traffic protections (SNCP, MSP, andMS-SPRing).Cards whose failure could affect the traffic canbe protected in 1+1 mode and tributaries can beprotected in 1:4.
3.1.3. COMPACT, SIMPLE, RELIABLE,LOW POWER EQUIPMENT
Designed for the Metro Network, the SAGEMADR2500 eXtra is very compact: dimensions are450 x 280 x 645 mm.Its high level of integration means it is also areliable and low consumption equipment.And last, but not least, it is very simple to installand to commission (default configurationflexibility and self-adaptive behaviour).
3.1.4. SCALABILITYThe SAGEM ADR2500 eXtra is a versatileplatform. It can be configured as an add-drop, aterminal multiplexer, a regenerator or a cross-connect.The SAGEM ADR2500 eXtra features 8 notdedicated slots for tributaries. It can give accessat the same time to 252 E1 (protected in 1+4)plus 12 STM-1 or 252 E1 unprotected plus 16STM-1.
The heart of the system is made on a 64x64VC4/VC4-4c/VC3/VC12 non-blocking Switch.
3.1.5. SNMP MANAGEMENT SYSTEMThe SAGEM ADR2500 eXtra implements anHTTP server. This enables monitoring of alarmsor events and configuration of any equipment inthe network. This application is a friendlygraphical windows-type man-machine interface.The SAGEM IONOS-NMS is an SNMPmanagement platform that includes aprovisioning feature. This software, adaptable tothe size of the managed network, runs on aWindows XP or a UNIX workstation; it featuresmulti -users and differentiated services withaccess security.
3.1.6. A SDH COST-EFFECTIVESOLUTION
Money saving is a leading goal of the SAGEMSDH family. Generally speaking, SDH/SONEThas proven to be one of the most cost-effectivetechnologies at the present time and the mostwidespread world-wide.This very important advantage is the result of athree dimensional concept.First, ADR2500 eXtra takes advantage ofSAGEM experience in designing next generationcost-effective and highly integrated equipment.The second point is, it is easy to install andcommission: the shelf is available with 19 andETSI mounting kit. Commissioning is timesaving.The third point is the management andmaintenance: the management is very simplewith the centralised IONOS-NMS system andMaintenance is reduced due to the highreliability of the equipment. Moreover, newfirmware can be downloaded to equipment fromIONOS-NMS without going to every site.
-
APPLICATIONS
Product Description SAGEM ADR2500 eXtra 6 s
FIBER OPTIC ACCESS NETWORK
The SAGEM - ADR2500 eXtra addressesaccess networks to create local loops connectedto the public network, with SDH, PDH interfacesfor voice, Gig, Fast and Ethernet interfaces fordata. These loops can be deployed in any areasserved by fibre optic.
3.2. INFRASTRUCTURE NETWORK
SAGEM ADR2500 eXtra is perfectly suited forinfrastructure networks in order to connect lowerlevel public switches to higher level publicswitches.
ADR2500 eXtra provides up to 252 E1 protectedplus 12 STM-1 in a single shelf. In case morePDH accesses are required, other ADR shelveswithout STM-16 interfaces can be connected(and then give access to the whole 1008 E1).
The granularity at VC4, VC3, VC12 levels willallow to optimise the traffic configuration.
3.3. PRIVATE NETWORK
The SAGEM - ADR2500 eXtra is ideal forbuilding high capacity private networks that
cover wide areas: e.g., industrial sites withmultiple buildings extended campuses.
The SAGEM - ADR2500 eXtra offers thebenefits of fibre optics and SDH technology(security, management).
For these applications, voice (inter-PABX links)and data (LAN interconnection, POS, ATM VC4-4c) compatibility is very important; open accessto the public network is also of major benefit forlinking remote sites.
3.4. PUBLIC UTILITY COMPANYNETWORKS
The SAGEM range of equipment (SAGEM -ADR155C, SAGEM FMX and SAGEM ADR2500eXtra) can be used for the construction of largelinear networks such as electrical, pipeline,railway, motorway or tunnel networks.Intermediate stations provide add-and-drop forup to 63 x 2 Mbps signals. Protection istherefore achieved with flat rings.
Gig E
Fast E
STM-16STM-16
Rseau Public
STM-4c
-
APPLICATIONS
Product Description SAGEM ADR2500 eXtra 7 s
3.5. ALTERNATIVE TO STM-64
Compactness of ADR2500 eXtra makespossible to install four shelves in two 42U racksplus the MUX 10000, which is a 1U high 4channels multiplexer / demultiplexer. Thissolution therefore is able to transmit the traffic at10 Gbps and makes an alternative to STM-64.This is also a scalable solution as it is possibleto start with one ADR2500 eXtra connected toMUX10000 and then to add the other oneswithout affecting the traffic (pay as you growsolution).
3.6. ETHERNET OVER SDH (EOS)
3.6.1. NEXT GENERATION SDHThe goal of Next Generation SDH is to transportdifferent type of services, both circuit mode andpacket mode at the same time. By incorporatingdifferent technologies the aim is to keep thestrong points and eliminate the weakness.The main points are :
- Multiservice transport based on SDH.SDH has efficient protection services as wellas mature technology.
- The flexibility of the trail creation iscarried by virtual concatenation and LCASprotocol. The virtual concatenation allowsstacking of bandwidth of different VC12,VC3or VC4 containers, in order to get the virtualcontainer to an adjustable bandwidthaccording to the needs. The granularityrespects 2 Mb/s, 50 Mb/s or 150 Mb/s. LCASprotocol insures the extremitysynchronisation when there is an adjustablebandwidth, avoids the momentaryinterruption services.
- Choosing the best encapsulation modefor each services :
- The in circuit flow mode, as a flow of E1PDH end E3/DS3 that are encapsulated in avirtual container (VC12/VC3) in following themultiplexing scheme proving SDH efficientquality.
- In flow packet mode using the new GFP-Fencapsulation mode which combine very lightoverhead, with the maintenance of the octetalignment and the packet size.
- The important innovation of thetranslater for Ethernet in the first mile
for transporting the flow of Ethernet packets :policing, shaping, double tagging, EthernetPrivat Line, Ethernet Virtual Private Lan.
STM-1/4/16
VCx-nVContainer
EthernetLLwith fixed
capacity basedon VCx-nVEthernet LL with SLAbased on VLAN double
taggingPDH/SDH LL
3.6.2. GFP150 EXTRA UNITThe card has advanced features for the EthernetSwitch with a 950 Mb/s capacity. Increasedcapacity is made by linking a second card ontothe first.The card provides 8 access Ethernet10/100Base-T.The card can cope with up to 8 VC3-nV (1 < n