dx 020 5v data sheet - stl-gmbh.de · technical data dx-020 5v no. of channels 3 diameter 60 mm...
TRANSCRIPT
DX Series
Data Sheet DX-020 5V
Highlights
System Overview
CONTENT
Technical Data
Illustrations and Figures
System Overview
The analogue to digital converter series of type „DX“ are specially designed for a large dynamic range and high stability, which makes them suitable for almost all applications.These ADC’s have internal digital calibrations resulting in highly significant signal output. Due to this digital signal processing, all signals have the identical transfer function which allows for high precise post-proces-sing of the data.
Highlights of the DX Series
– Low power consumption
– Very low noise, large dynamic range and high linearity
– Digital temperature compensation minimizes drifts
– Sensor output digitally error-corrected with respect to scaling and offset
– Small size and lightweight
– Single coaxial cable for power and data introduces minimal magnetic signature
Technical Data DX-020 5V
No. of channels 3
Diameter 60 mm
Length 165 mm
Weigth 0.5 kg
Power supply 16 VDC, 0.9 W
Interface connector type LEMO coaxial series 0S, FFA.0S.250
Interface - PCMCIA type II- Ethernet (Power over Ethernet)
Degree of protection Standard: IP65, higher protection on request
Input range ± 4.6 V
Noise @ 1 Hz < 250 nV/rtHz
Sample rate 0.1 Hz – 10 kHz
Analogue filter Anti aliasing
Digital filter 0 dB @ DC – fs/3, < -120 dB @ ≤ fs/2
Resolution 4 nV
Crosstalk < 126 dB
Max. bandwidth 4 kHz
Offset error (25 °C) < 25 μT
Offset drift (25 °C) < 2 μV/K
Scale error (25 °C) < 5 ppm FS
Scale drift (25 °C) < 1 ppm/K
Illustrations and Figures
Functional overview
DX-020 5V with coaxial cable (included)
DX-020 5V sideview
DX-020 5V coaxial interface
Component scheme