dynatech products range of safety components for lifts
TRANSCRIPT
STANDARD TENSING SYSTEM
Springs tensing systemRope slackening contact included
Polígono Ind. de Pina de EbroSector C, p-9
50750 Pina de EbroEspaña (Spain)
(T) +34 976 165 860 (F) +34 976 165 964
Dynatech, Dynamics & Technology, S.L.
Products RangeSPECIALISTS IN SAFETY COMPONENTS
STAR & STAR A3BIDIRECTIONAL OVERSPEED GOVERNOR FIXED ON/UNDER CAR
Tripping speed = 0,35 ÷ 2,72 m/s Rated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6 mmOverspeed switch. Remote tripping.STAR A3 ful�lls EN-81+A3
ON-BOARD GOVERNORS
STAR PLUS & STAR A3 PLUSBIDIRECTIONAL OVERSPEED GOVERNOR ASSEMBLED ON/UNDER THE CAR
Tripping speed = 0,35 ÷ 2,72 m/s Rated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6 mmOverspeed switch. Remote tripping. Encoder (optional).STAR A3 PLUS ful�lls EN-81+A3
EN-81+A3
ROLLER TENSING SYSTEM
Springs tensing systemRope slackening contact includedIdeal for installations with a reduced headroom and pit
QUASAR T-25/ QUASAR T-25 A3BIDIRECTIONAL OVERSPEED GOVERNOR INTEGRATED WITHTHE SAFETY GEAR
Tripping speed = 0,3 ÷ 2,33 m/s Rated speed=< 2 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switchRemote trippingFULFILLS EN-81+A3
QUASAR SV/ QUASAR SV A3BIDIRECTIONAL OVERSPEED GOVERNOR FIXED TO THE CAR
Tripping speed = 0,3 ÷ 2,7 m/s Rated speed=< 2,18 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switchRemote trippingFULFILLS EN-81+A3
ECOELECTROMECHANICAL WEIGHING DEVICE
Silentblocks deformation measurement deviceFeeding: 12 - 32 V DC Overload relay: (NC or NO) Overload sound signal
WEIGHING DEVICES
D-BOX xsUCM-CONTROLDEVICE
D-BOX detects any type of uncontrolled movement of the car (UCM) with the doors open.Power supply: • 24-30 VDC or AC power supply. • Battery power supply. 12 VDC, 1 AhOutputs: • Safety line contact. • System failure information
TENSING SYSTEMS FOR ON-BOARD
UCM-ELECTRONIC
It is assembled onto the T25 steering mechanism where, in turn, ASG progressive safety gear is installed
SPECIALISTS IN SAFETY COMPONENTS MORE INFO: www.dynatech-elevation.com
IN-3000INSTANTANEOUS SAFETY GEAR
For tripping speed 1 m/s:P+Q max. 8 mm Cold drawn guide rail = 2480 kgP+Q max. 9 mm Cold drawn guide rail = 2837 kgP+Q max. 9 mm Machined guide rail = 1855 kgGuide rail type: Cold drawn or machined and oiled or dry.
IN-G10INSTANTANEOUS SAFETY GEAR
For tripping speed 1 m/s:P+Q max. = 2348 kgGuide rail type: Cold drawn and oiled or dry.Admissible guide rail thickness: 10 mm
IN-6000INSTANTANEOUS SAFETY GEAR
For tripping speed 1 m/s:P+Q max. Cold-drawn guide rail= 6601 kgP+Q max. Machined guide rail= 5295 kgGuide rail type: Cold drawn or machined and oiled or dry.Admissible guide rail thickness: 16 mm
INSTANTANEOUS SAFETY GEARS
PQ-4000-UDBIDIRECTIONAL
Minimum P+Q = 2173 kg Maximum P+Q = 4023 kgMax. Trip. Speed = 2,5 m/sGuide rail type: Machined and oiled. Admissible guide rail thickness: 8 to 16 mmMinimum gripping width =25 mmFULFILLS EN-81+A3
PQ-3400-UDBIDIRECTIONAL
Minimum P+Q = 1107 kgMaximum P+Q = 3304 kgMax. Trip. Speed = 2,5 m/sGuide rail type: Machined and dry.Admissible guide rail thickness: 8 to 16 mmMinimum gripping width =25 mmFULFILLS EN-81+A3
PR-2500-UD V.35BIDIRECTIONAL
Minimum P+Q = 613 kgMaximum P+Q = 1955 kgMax. Trip. Speed = 2,5 m/s Guide rail type: Cold drawn or machined and oiled.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN-81+A3
PR-2000-UDBIDIRECTIONAL
Minimum P+Q = 537 kgMaximum P+Q = 1222 kgMax. Trip. Speed = 2,0 m/sGuide rail type: Cold drawn and oiled. Admissible guide rail thickness: 5 to 16 mmMinimum gripping width =25 mmFULFILLS EN-81+A3
PR-2500-UD V.50BIDIRECTIONAL
Minimum P+Q = 613 kgMaximum P+Q = 1955 kgMax. Trip. Speed = 2,5 m/s Guide rail type: Cold drawn or machined and oiled.Admissible guide rail thickness: 7 to 16 mmMinimum gripping width =25 mmFULFILLS EN-81+A3
T-2EXTENSIBLE DRIVING BAR
Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) Used with: PR-2500-UD V.35
PR-2500UNIDIRECTIONAL
Minimum P+Q = 741 kg Maximum P+Q = 1700 kg Max. Trip. Speed = 2,5 m/sGuide rail type: Cold drawn and oiled. Admissible guide rail thickness: 8 to 16 mmMinimum gripping width =25 mmFULFILLS EN-81+A3
T-1EXTENSIBLE DRIVING BAR
Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) Used with: Instantaneous PR-2500
PROGRESSIVE SAFETY GEARS
T-25 / T-25 UDEXTENSIBLE DRIVING BARS
Distance between guides: from 600 to 3000 mm (If it is needed other distance, contact us). Safety switch (optional).
ASG-100 UD ASG-120 UD ASG-121 UDASG-221 UDASG-65 UDBIDIRECTIONAL
Permissible massMinMax Max Tandem con�g.
Admissible guide rail thickness
Minimum gripping width
Maximum tripping speed
FULFILLS EN-81+A3
Cold-drawn Machined Machined Machined Cold-drawn Oiled Oiled Dry Dry Oiled
515 kg 693 kg 598 kg 754 kg 790 kg 2139 kg 4233 kg 4019 kg 3284 kg 2214 kg 4278 kg 8466 kg 8038 kg 6568 kg 4428 kg
ASG-100 ASG-120 ASG-121ASG-221ASG-65UNIDIRECTIONAL
TENSION WEIGHT 200
Rope slackening contact included. Rope Out Protection included.Protection plate included. M14 forged clips included.
LBD-200 BIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,7 ÷ 2,74 m/sRated speed=< 2,3 m/sØ pulley = 200 mm; Ø rope = 6mm/6,3mm/6,5mmTest groove included.Hardened groove (optional). Remote reset and remote tripping mechanism by electrical acting (both optional).
TENSION WEIGHT 300
Rope slackening contact included. Rope Out Protection included.Protection plate included. M14 forged clips included.
VEGA & VEGA A3BIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,4 ÷ 2,87 m/s Rated speed=< 2,4 m/sØ pulley = 200 mm; Ø rope = 6mm/6,3mm/6,5mmHardened groove (optional). Remote reset and remote tripping mechanism by electrical acting (both optional).VEGA A3 ful�lls EN-81+A3
VEGA PLUS & VEGA A3 PLUSBIDIRECTIONAL OVERSPEED GOVERNOR WITH ENCODER
Encoder (optional) Same features as VEGA and VEGA A3
LBD-300 & LBD-300 A3BIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,8 ÷ 2 m/sRated speed =< 1,6 m/sØ pulley = 300 mm; Ø rope = 6mm / 8mmTest groove included.Hardened groove (optional). Remote reset and remote tripping mechanism by electrical acting (both optional). LBD-300 A3 ful�lls EN-81+A3
QUASARUNIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,3 ÷ 2,7 m/s Rated speed=< 2,18 m/sØ pulley = 120 mm; Ø rope = 4 mmHardened groove Overspeed switch Remote tripping
LINKAGES
EN-81+A3EN-81+A3
TENSION WEIGHT 120GO
Rope slackening contact included. Rope Out Protection included.Protection plate included.
COMPACT TENSING PULLEY 200
Springs tensing pulleyCasting pulley. Rope tensioner: That will make rope re-tensioning easier if required.Rope slackening contact included. Rope Out Protection included.
T-3EXTENSIBLE DRIVING BAR
Distance between guides: from 600 to 3000 mm(If it is needed other distance, contact us)Safety switch (optional) Used with: PR-2500-UD V.50 PR-2000-UD PQ-3400-UD PQ-4000-UD
PROGRESSIVE SAFETY GEARS
PROGRESSIVE SAFETY GEARS WITH LATERAL LINKAGESTANDEM CONFIG.
OVERSPEED GOVERNORS
ASG-100 ASG-120 ASG-121 ASG-221 ASG-65 ASG-100 UD ASG-120 UD ASG-121 UD ASG-221 UD ASG-65 UD
7 to 16 mm 8 mm
25 mm 20 mm
2,33 m/s 3,9 m/s 2,33 m/s
QUASAR A3BIDIRECTIONAL OVERSPEED GOVERNOR
Tripping speed = 0,65 ÷ 2,63 m/s Rated speed=< 2,18 m/s
Ø pulley = 120 mm; Ø rope = 6,5 mmHardened groove Overspeed switch
Remote trippingQUASAR A3 ful�lls EN-81+A3
COMPACT TENSING PULLEY 120 & 126
Springs tensing pulleySteel pulley. Rope tensioner: That will make rope re-tensioning easier if required.Rope slackening contact included. Rope Out Protection included.
RENORENO FIXING KIT FOR NEW OR EXISTING FRAMES
Safety Gears: The entire range of PR, PQ and ASG progressive safety gears
Governors: Quasar T-25
FIXING KIT