e very l ife h as a p urpose… 9010 / 9020 controller

EVERY LIFE HAS A PURPOSE…

9010 / 9020Controller

9010 / 9020 Controller


Target Markets

General Industry Oil, Gas &

Petrochemical Water & Wastewater LPG

9010 / 9020 Control Card

9010 Single Channel Control Card Factory Configured

9020 Dual Channel Control Card Factory Configured


Control Module Features Operates with complete range of

2- or 3-wire gas sensors including: Toxic Combustible Oxygen

User-friendly configurable operation Leading edge SMD technology throughout


Control Module Features Provides real-time self-diagnostics Each module comes with an independent AC/DC

power supply transformer AC/DC automatic switching in case of

AC power failure User defined access codes prevent accidental or

undesired tampering


Control Module Features Each module has two SPDT relays with change-over

contacts for verification of Warning and Alarm conditions

Default and configuration data stored in non-volatile memory

3 Adjustable Alarm levels for Caution, Warning & Alarm (indicated by LED’s)

9010 / 9020 Display Features

4-digit back-lit LCD Choice of unit of

measure (LEL, LELm, PPM, % Vol, g/m3 or blank)

Alarm status Cal, Time-out / Off,

CWA Delay ON, Alarm inhibit

9010 / 9020 Keypad Features

Simple 3-key operation Keypad allows for:

Configuration Calibration Routine operation

▲ ▼

9010 / 9020 Output Signals

Analog (normal) - 0-20, 4-20 mA (selectable) isolated

Analog (fault) - 0,2,4,20 mA / frozen (selectable) RS 485 for connection to a printer


Configuration and Calibration No tools required for adjustment Utilizes keypad Remote non-intrusive calibrator Adjustable Calibration Timer

Reminds user of selected calibration interval User selectable 0-999 days CAL message appears on display

9020 Component Side View

9010 / 9020 Enclosures

General Purpose Plastic Protection against dust and

rain 1 – 9010 (1 point) 1 – 9020 (2 points) 4 lbs


Nema 4X Metal Protection against

dust and rain External Horn Acknowledge Button 5-10 – 9010

(up-to 10 points) 5-10 – 9020

(up-to 20 points) 67-100 lbs Also Available in Stainless Steel


Explosion Proof Metal Suitable for Class 1, Div. 1

& Div. 2 areas 1-2 – 9010

(up-to 2 points) 1-2 – 9020

(up-to 4 points) 52-86 lbs


Rack Mount Standard Rack Configuration Wiring in rear 10 – 9010 (up-to 10 points) 10 – 9020 (up-to 20 points) 23 lbs

9010 / 9020 Sensor Options

Passive catalytic sensor Electrochemical sensor Infrared sensor (via specific interface PCB) Ultima® X Transmitters FlameGard® 5 Flame Detectors Ultima® MOS-5 Gas Detector Ultima® OPIR-5 Open Path Gas Monitor

e very l ife h as a p urpose… 9010 / 9020 controller

Documents