32

Dimensions in millimeters (inch) unless otherwise stated

EA Electronic Access Control

The versatility of the electronic interface Options for generating an electronic signal to release a locking mechanism, to energize a latch, or to drive a motor, include remote actuation as well as direct actuation at the physical point of the mechanical interface. The specific solution you choose will depend on a variety of circumstances – how you want to monitor or maintain access control, your need to balance convenience and security, how you choose to distribute access capabilities, and how often you need to revise or update your security arrangements.

Access control devices can be based on ...

... Something you have (Key, token)

... Something you know (Pin number)

... Something that is you (Fingerprint)

Southco’s iButton® electronic key system provides secure access control with an intuitive one touch actuation.• Eliminates key management issues – keys are easily programmed as needed

• Simply touch probe with programming key to enter programming mode to add or delete user keys

• Lock/unlock signal produced by simply touching valid iButton® key to probe

• Programmable output timing

• 280 trillion possible key codes – no duplication

• Sleep mode for minimal current draw

• LED’s integrated with probe for programming and lock status feedback

• Controls all SOUTHCO® electromechanical locks and latches

• For additional details, go to www.southco.com

System Part Number EA-B90 System includes 1 Probe, 1 Controller, and 1 Wire Harness.

Southco’s self contained keypad controllers provide simple PIN access control without the need to carry physical credentials.• Simple PIN programming

• LED indicator and audible alarm for programming and lock status

• Custom logos and housing design options

• Flush, surface and rear mount options

• 2 x 6 and 3 x 4 button layouts

• Controls all SOUTHCO® electromechanical latches

• For additional details go to www.southco.com

iButton® is a registered trademark of Maxim Integrated Products, Inc.

Controller

Probe

Electronic Key

Custom logos and fob design options

Power Supply (not included)

Electromechanical Latch (not included)

EA-K3-033 EA-K1-011-9

33

Southco’s RFID Proximity Readers provide secure contactless access control.• Simple card programming procedure

• LED indicator and audible alarm for programming and lock status

• Reader accommodates up to 9999 users

• Card-only, Card and PIN, Card or PIN access modes

• Controls all SOUTHCO® electromechanical latches

• For additional details, go to www.southco.com

Contact Southco to discuss additional access control requirements.

Southco can provide custom switch solutions to meet your industrial design requirements for access control. Contact Southco for more information.• Integrated electronics

• Handles, pulls with integrated switches

• Backlit switches

Southco’s RF key fob controller provides convenient remote control of multiple electronic locks and latches.• Dual sequenced 30 Amp output relays minimize load on batteries

• Potted waterproof construction

• 100 ft range

• Fused outputs

• Light/Horn output for lock/unlock feedback

• 9-15VDC Operating Voltage

• Simple transmitter programming

• Ships with one receiver and 2 transmitters

• For additional details, go to www.southco.com

Receiver Transmitter

EA-C1-011

EA-P1-011-9

EA-R01

www.southco.com/EA-A01

LAT1 LAT2 CTRL1 CTRL2 PWR

-

+

SWITCH

Junction Box EA-A01-001

Controller 1

Controller 2

Latch 1

Latch 2

1 2 3

4 5 6

7 8 9

0 #

1 2 3

4 5 6

7 8 9

0 #

• Accommodates2access controldevicesand 2electromechanical latches• Labeledconnectionsfor simplesetup• Convenientcentralized connectionforsystem power• Switchesallowforany combinationofaccess controltolatch• UsewithanySouthco accesscontrolto electromechanicallatch combination• OrderJunctionBox, cablesandpowersupply separately

EA-Junction BoxElectronic access

The Southco EA-A01 series Junction Box provides a convenient interconnect point for the components that make up a typical electronic access solution: the access control device, the electromechanical latch and the system power. The Junction Box provides a centralized interconnect to simplify cable routing and to provide for the optimum access to cable connectors. Use the Junction Box to operate up to 2 electromechanical latches via up to 2 access control devices. Switches allow for configuration of any access control device to electromechanical latch combination. Use with any combination of Southco access control device and electromechanical latch.

PartNumber Description Function

EA-W02-503-51*5 Meter wire harness

-RJ12 to Hirose 4 Pin DF11-4DS-2C

Connects Junction Box to EM-10-XX-XXX

Electronic Keeper

EA-W20-501-51*5 Meter wire harness

-RJ12 to Molex 43020-0601

Connects Junction Box to R4-EM-XX-XXX

Electronic Rotary Latch

EA-W01-500-51*5 Meter wire harness

-RJ12 to Hirose 6 Pin DF11-6DS-2C

Connects Junction Box to H3-EM-60-100

Electronic Swing Handle

EA-W52-506*5 Meter wire harness

-RJ45 to stripped and tinned endConnects Junction Box to

Customer Application

EA-W52-506-80*5 Meter wire harness

-RJ45 to JA connector A2506H-09

Connects Junction Box to EA-K1 and EA-P1 Series

Access Controllers

EA-A02-002** Power supply with NA 2-Pin Supplies Power to System

EA-A02-002 & EA-A02-002-2

Power supply with EURO 2-Pin Supplies Power to System

EA-A02-002 & EA-A02-002-3

Power supply with UK 3-Pin Supplies Power to System

EA-A02-002 & EA-A02-002-4

Power supply with SAA 2-Pin Supplies Power to System

12

3

45

6

78

9

0

#

12

3

45

6

78

9

0

#

1 2 3

4 5 6

7 8 9

0 #

1 2 3

4 5 6

7 8 9

0 #

1 2 3

4 5 6

7 8 9

0 #

1 2 3

4 5 6

7 8 9

0 #

1 2 3

4 5 6

7 8 9

0 #

1 2 3

4 5 6

7 8 9

0 #

AccessoriesListing

*Contact Southco for custom lengths ** EA-A02-002 comes with EA-A02-002-1 NA 2-PIN

PanelPreparation

Dimensions in millimeters (inch) unless otherwise stated

www.southco.com/EA-A01© Southco EA-A01 NA 08-10

Other options available. For complete details on variety, part numbers, installation and

MaterialandFinishRoHs Compliant housing: ABS PCB: FR4

SpecificationsOperating Voltage: 12-24V Max. Current: 1.5A

MatingConnectorsLAT1 & LAT2: Plug, Modular, 6P6C (RJ12)

CTRL1 & CTRL2: Plug, Modular, 8P6C (RJ45)

PWR: Plug, Barrel, 2.1mm 1D, 5.5mm 0D

Individually Shipped in ESD Bag

ConnectionDetailsRecommended Mounting Hardware: M3.5 - M4.5 (Do not over tighten)

EA-Junction BoxElectronic access

63.3(2.49)

42(1.65)

42(1.65)

21(0.84)

4 x Ø 5.0 Thru (0.196) Ø 9.0 X 900 (0.35)

Mounting holes for 6-8 screws (M3.5 - M4)

4 X Ø 4.3 ±0.1(0.169 ±0.003)

126 (4.96)

126 (4.96)

3 (0.12)

63.71 (2.5)

137.68 (5.42)

113.82 (4.48)

31(1.22)

PartNumber

EA-A01-001

GlobalCorporateHeadquartersandAmericasCustomerService&TechnicalSupportCenterTel: (1) 610-459-4000 · Fax: (1) 610-459-4012 · www.southco.com · info@southco.com