eaton correctional led lighting brochure · surface / celing / wall individual / continuous...
TRANSCRIPT
CellsMedium to high mounting heights are typical in dayrooms. Often in supervised areas, these luminaires should have the fl exibility to be surface or pendant mounted, individual or continuous row. Though not within reach, polycarbonate lenses and tamper resistant hardware are preferred. Varying lumen packages for different mounting heights and illumination requirements is a necessity.
Several different ceiling systems are used in corridors, depending on the security level. Recessed luminaires are available for use with a standard hard ceiling, a security ceiling, or a grid ceiling. Low profi le surface mount fi xtures are also available. Choose from 1' wide fi xtures for narrow corridors, or up to 2' width for larger corridor areas. Several levels of illumination and durability are available.
Kitchen and dining areas are supervised areas, though the luminaires still require a degree of robustness. Additionally, the luminaires must withstand potential moisture and abuse in the food processing area, often requiring wet location, NSF listing, stainless steel, and security lensing and hardware. The dining area is typically higher mounting heights and less prone to abuse, often surface or pendant mounted, individual or continuous row.
Often supervised areas, healthcare areas of the correctional facility must take into account potential abuse. Luminaires will be subject to patients who are potentially mentally or physically unstable, thus requiring security lenses, rugged material, and tamper resistant hardware – all while providing exam, ambient, and reading illumination.
Typically supervised areas in the interior and exterior, recreational facilities are important to the overall physical and mental well-being of the inmate. Typically mounted 20' and above, the luminaires still must withstand potential abuse from a variety of sports-related objects, while offering a variety of illumination levels. Whether surface or pendant mounted in the exterior, or pole or wall mounted on the exterior, Eaton Lighting Solutions has the product for your challenging needs.
Illuminating a cell is perhaps the most challenging task in a correctional facility. Cells are often unsupervised, inmates occupy the cell for long periods of time, and often the luminaires are within reach. This robust luminaire must supply precise optical control and also be built to demanding standards. Being able to withstand potential abuse and also prohibit the concealment of contraband are minimum requirements.
Dayrooms Corridors
Kitchens/Dining Healthcare Exam Rooms Recreational
Fail-Safe LED product features
Clear polycarbonate lens up to ½" thick Irretrievable blade trap design for all clam-shell housings
Clear tempered glass up to ½" thick Piano hinge doors are one-piece, fully continuous
Cold rolled steel up to 12GA (0.105" thick) Aircraft cables for door attachment are 0.125" thick
Stainless steel up to 12 GA (0.105" thick) Removable gear trays available
Dimmable LED night lights available Surface mount products are weld and ground smooth
Stainless steel tamper proof hardware Exposed hardware is recessed, to resist unauthorized entry
All metal parts painted after fabrication Every product 100% electrically tested for superb reliability
Lens secured by 14GA steel hold-downs and 10-24 nuts/bolts Color temperatures 3000K, 3500K, 4000K, 5000K, CRI > 85
Anti-microbial matte white paint finish available Standard 0-10V dimming driver
6
5
6
5
Fail-Safe | Correctional Fail-Safe | Correctional Fail-Safe | Correctional
FCCSURFACE / CORNER
CLAMBSHELL DESIGNFMS
SURFACE / CELING / WALL
ONE-PIECE HOUSINGFUSL
SURFACE / CELING / WALL
CLAMBSHELL DESIGN
• Three window panel design allows for multiple level switching for a variety of uses
• Over 17,000 delivered lumens allows for use in high ceiling heights
• Broad distribution to maximize spacing and achieve optimal foot-candle levels
• 2' and 4' lengths
• Wet location under covered ceiling. Damp location standard
• Available up to 12GA outer shell, steel or stainless steel
• Surface, ceiling or wall mount, available in 8" or 12" width
• Matte white paint standard
• Curved, frosted polycarbonate lens for beauty and vandal resistance
• Die-cast fl at or rounded end caps provide function and aesthetics
• 2', 4', and 8' lengths
• Wet location under covered ceiling. Damp location standard
• IP64 ingress protection rating available
• Aluminum housing and ends for corrosion resistance and durability
• Sizes ranging from 1' x 1' to 2' x 4'
• For use with grid ceilings (FSR) and hard ceilings (FMR)
• Full door is positioned between the grid / ceiling and the fi xture, preventing unauthorized entry
• Two heavy-duty stainless steel aircraft cables attach the door to the fi xture
• Wet location under covered ceiling. Damp location standard
• Stainless steel available, painted or brushed, up to 12GA thick
FCTSURFACE / CELING / WALL
CLAMBSHELL DESIGNFMR / FSRRECESSED / CEILING
ONE-PIECE HOUSINGHVL
SURFACE / CELING / WALL
INDIVIDUAL / CONTINUOUS
Fail-Safe | Correctional Fail-Safe | Correctional Fail-Safe | Vandal Resistant
• 8-1/2" x 8-1/2" size for inconspicuous placement in the corner
• Directed illumination for optimal horizontal and vertical illumination
• One-piece clamshell housing
• Wet location under covered ceiling
• 2' and 4' lengths
• Over 6,000 delivered lumens available
• Linear LED dimmable night light
• 12GA to 18GA material thickness
• Stainless steel, painted or brushed
• 1' x 1' to 2' x 4' sizes for use in a variety of applications
• Low profi le 3-1/2" depth for use in various ceiling heights
• Up to 3/8" thick tempered glass or 1/2" polycarbonate for maximum security
• One-piece housing with standard continuous piano hinge
• Wet location under covered ceiling
• Over 12,700 delivered lumens in the 2' x 4' size
• Linear LED dimmable night light
• Sleek, four-sided slope design combines style with function
• 3-1/2" depth for use in low to medium ceiling heights
• 1' x 2' and 1' x 4' sizes
• Fully concealed piano hinge leaves no exposed parts for weapon fabrication, facilitates maintenance
• Back plate forms an irretrievable blade trap to present contraband concealment brushed
product lineup – Fail-Safe
Cells Dayroom Healthcare Sally Port2 431
Cells, Washroom Cells, Sally Port, Corridors Cells, Corridors
Cells, Sally Port, Corridors Cells Dayroom, Warehouse, Laundry, Kitchen,Recreation Indoor, Classroom, Library
6
5
6
5
Fail-Safe | Correctional
FMBSURFACE / WALL
CLAMBSHELL DESIGN
• Surface ceiling or wall mount, available in 8" or 12" width
• Matte white paint standard
• Curved frosted polycarbonate lens for beauty and vandal resistance
• Flat steel endcaps provide functional and aesthetic value
• 2', 4', and 8' lengths
• Wet location under covered ceiling. Damp location standard
• IP63 ingress protection rating available
• Steel housing and end caps standard. Stainless steel or aluminum
HVSLSURFACE / CELING / WALL
INDIVIDUAL / CONTINUOUS
Fail-Safe | Vandal Resistant
• Purposeful design eliminates sharp corners to maximize impact resistance
• Back plate forms an irretrievable blade trap to prevent contraband concealment
• LED up/down divider allows separate up/down illumination
• Clamshell design allows for seamless front and prevents unauthorized entry
• 2' and 4' lengths
• Wall or ceiling mount applications
• Up to 12,000 delivered lumens, 6,000 up and down, for a host of foot-candle levels
Washroom Warehouse Laundry Kitchen / Dining
2
5
11
14
10
3
8
1
5 6 7 8
11
Cells, Washroom
Dayroom, Warehouse, Laundry, Kitchen,Recreation Indoor, Classroom, Library
Fail-Safe has been a pioneer in correctional lighting and continues to lead the way with innovative products and energy-saving solutions. Exceptional performance and structural integrity are designed into every luminaire to ensure long-term value and durability. Fail-Safe’s unmatched product breadth meets a wide range of security levels and confi nement applications including cells, dayrooms, coridors, medical service areas, kitchens and lighting controls.
Meeting the challenges of correctional lighting
6
5
6
5
• Downward distribution, or up/down distribution
• 3-3/4" deep to minimize impact and satisfy ADA compliance
• Wall or ceiling mount
• 18", 24", and 48" lengths
• Dedicated LED up/down divider for independent switching
• Dedicated back pan for installation ease and contraband prevention
• 14GA or 16GA housing, polycarbonate lens up to 3/8" thick
Fail-Safe | Correctional / Healthcare
FWLSURFACE / CELING / WALL
ONE-PIECE HOUSING
Fail-Safe | Vandal Resistant
Corridors Recreation Indoor Recreation Outdoor Offi ce Areas
4
9
12
13
15
16
6
7
9 1210 11
• Full front polycarbonate lens for maximum protection
• Three lumen packages for varying mounting heights / applications
• Opal or clear polycarbonate lens
• IP65 ingress protection standard
• Tamper proof stainless steel hardware standand
• High Ambient option
FPSSURFACE / CELING / WALL
AMBIENT EXAM
Healthcare
Washroom, Laundry, Kitchen, CorridorWarehouse, Recreation Indoor,
Lighting needs in correctional applications can be diverse and require a wide range of product needs and constructions. The security level needs are based on specifi c lighting applications within the facility and the amount of supervision available. Products need to not only provide proper illumination but must be designed to withstand the tough environment while still being easy to maintain and install.
6
5
6
5
• 1' x 4', 2' x 2', and 2' x 4'
• Recessed architectural vandal resistant, sealed and gasketed luminaire
• Wet locaton under covered ceiling
• IP65 ingress protection
• Clear polycarbonate lens up to 3/8" thick for impact resistance
• Continuous piano hinge available. Two aircraft cable lanyards standard
• NSF listing
• Tamper-proof hardware available to prevent unauthorized entry
• 2' x 2' and 2' x 4' sizes for recessed ceiling applications
• Ambient, exam, and reading functions
• Low voltage relay for patient control of the reading and ambient functions
• Anti-microbial fi nish
• Vandal resistant door, incorporating up to 3/16" thick clear polycarbonate lens
• Tamper-proof hardware avalable to prevent unauthorized entry
• One or two LED reading lights
• 2' x 2' , 2' x 4', 1' x 4', and 1' x 2'
• Clear polycarbonate lens to 0.250" thick
• Lens is attached to fi xture with high bond adhesive
• IP66 rated, wet location under covered ceiling
• NSF rating available
Fail-Safe | Vandal Resistant / Healthcare Fail-Safe | Vandal Resistant / Healthcare Fail-Safe | Vandal Resistant
• 1,000, 1,500, 2,000, and 3,000 lumen packages
• Stylish bottom trim ring constructed from heavy-duty steel
• Stainless steel bottom trim ring
• IP66 ingress protection
• Polycarbonate up to 7/16" thick for maximum protection
• Tamper-proof hardward attaches trim ring to the plaster frame
• 11" round in 15, 20, and 25 watt lumen packages
• 15" round in 20, 30, and 40 watt lumen packages
• 18" round in 50, 65, and 80 watt lumen packages
• Polycarbonate lens and front cover for maximum protection against abuse
• Variety of face plates for many different design intents
• Emergency battery packs, photocells, occupancy sensors
• Custom colors
SGIRECESSED / CEILING
SEALED & GASKETEDMAE
RECESSED / CEILING
AMBIENT / EXAM / READING
TR11 / TR15SURFACE / CELING / WALL
HIGH ABUSE POLYCARBONATEFLD4A / FLD4AX
RECESSED / CEILING
4" SEALED LED DOWNLIGHT
Fail-Safe | Vandal Resistant / Healthcare Fail-Safe | Vandal Resistant / Healthcare Fail-Safe | Vandal Resistant
• 1,000, 1,500, 2,000, and 3,000 lumen packages
• Extended trim fl ange with countersunk holes attaches trim to plaster frame
• Refl ector available in specular aluminum or matte white painted aluminum
• IP65 ingress protection
• Polycarbonate lens
• Tamper-proof screws attach the trim to the plaster frame
Visitation Roadway Classrooms Library13 14 15 16
ENVRECESSED / CEILING
ENCOUNTER VANDAL
FLD6A / FFLD6ARECESSED / CEILING
6" VANDAL LED DOWNLIGHT
Healthcare, Washroom, Kitchen, Visitation Healthcare
Healthcare, Visitation Washroom, Laundry, Recreation Indoor,Recreation Outdoor
Healthcare, Visitation
Healthcare, Sally Port, Kitchen, Corridor,Office, Visitation, Classrooms, Library
6
5
6
5
Lumark | Floodlight
• Lumen packages are ideal replacements for T5HO, T8 or T12 applications
• Excellent performance with lm/W, ranging up to 116 lm/W
• 8 ft., 4ft. and 2ft. product confi gurations
• Three sensor options available (SWLED)
• 0 to 10V digital driver (standard), optional DALI options
• Three CCT options: 3500K, 4000K, 5000K
• Ideal for surface, suspended and wall applications
Metalux | Commercial / Industrial
• Die-cast aluminum housing, driver compartment and driver door
• Replaces up to 400W equivalent metal halide
• Two Lumen Packages, Nominal 14,600 lumens and 9,400 lumens
• 6H x 6V NEMA Wide Distribution
• Standard 4,000K CCT, minimum 70 CRI
• 120-277V 50/60Hz, 347V 60Hz or 480V 60Hz
• Operation temperature range of -40°C to 40°C
• 0-10V dimming available
• 50ºC high ambient option
Lumark | Area / Site
• 2' x 2', 2' x 4', and 1' x 4'
• Effi cacy up to 132 lm/W
• Advanced optical control married with contemporary styling
• Optional integrated sensor system for occupancy and daylight harvesting
• Four CCT options: 3,000K, 3,500K, 4,000K, and 5,000K at 85 CRI
• Four stocked lumen packages offered along with multiple MTO options
• Standard 0-10V continuous dimming driver (120-277V)
Metalux | Ambient
• 40 lumen packages with an industry leading output of 103,000 lumens and maximum effi cacy of 167 lm/W
• A choice of six high effi ciency optics available in Type I, II, III, IV, V and Type V narrow
• Greater than 86% lumen maintenance expected at 100,000 hours, greater than 92% at 50,000 hours
• IP66 optics, 3G vibration rating, 4-bolt mounting
• Robust surge protection rating of 20kV/10kV
• Control options include 0-10V dimming, NEMA twistlock and NEMA 7-Pin photocontrol receptacle
Lumark | Area / Site / Roadway
HBLED• LEDs in 4000K and 5000K 85+CRI
• Optional 0-10V dimming driver
• Multiple lumen packages
• Aisle and wide distributions
• Multiple sensor options
ILED• 4 ft. and 8 ft. product confi gurations
• Surface, suspended and continuous row mount
• Multiple lumen packages available
• Multiple shielding options
Metalux | Industrial
Galleon• Choice of 16 high-effi ciency, patented AccuLED Optics™
• L90, 60,000 hours at 40°C (IESNA TM-21)
• Standard in 4000K CCT and min 70 CRI, optional 3000K and 6000K
• 120-277V 50/60Hz, 347V 60Hz or 480V 60Hz operation
Prevail• Low profi le, die-cast aluminum housing
• Type II, III, IV, and V Distributions
• Three lumen packages, up to 15,500 lms
• Replaces up to 400W equivalent metal halide
• 50ºC high ambient option
y
6
5
6
5
Galleon/PrevailSPECIFICATION GRADE
ALUMINUM CONSTRUCTIONCelesteon CTN
AREA / SITE
ALUMINUM CONSTRUCTIONNight Falcon
AREA / ACCENT / SIGNAGE
ALUMINUM CONSTRUCTION
Dayroom, Warehouse, Recreation Indoor
HBLED / ILEDHIGH BAY / LOW BAY
INDUSTRIAL LED
yroooomm WarWarehoehouseuse RRecrecreateationion InInd
CruzeSPECIFICATION GRADE
RECESSSED LEDSNLED / SWLEDSUSPENDED / SURFACE / WALL
COMMERCIAL / INDUSTRIAL LED
SPENDED / SURFACE / WALL
product lineup – Metalux and Lumark
Recreation Outdoor, Roadway Recreation Outdoor, Roadway Recreation Outdoor, Roadway
Dayroom, Warehouse, Recreation IndoorLaundry, Kitchen, Corridor, Office AreaClassrooms, Library
Corridor, Dayroom, Warehouse, Stairwell
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Product availability, specifications, and compliances are subject to change without notice.
Canada Sales 5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172
Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting
© 2018 EatonAll Rights ReservedPrinted in USAPublication No. BR519009ENJanuary 29, 2018
Lighting Product Lines
Halo
Halo Commercial
Portfolio
Iris
RSA
Metalux
Corelite
Neo-Ray
Fail-Safe
MWS
Ametrix
Shaper
io
Lumark
McGraw-Edison
Invue
Ephesus
Lumière
Streetworks
AtLite
Sure-Lites
Controls Product Lines
Greengate
iLumin
Zero 88
Fifth Light Technology
iLight (International Only)
Connected Lighting Systems
LumaWatt Pro
WaveLinx
Distributed Low-Voltage Power
ConnectWorks