ecoclean - dürr application technology - dürr ... · ostrich feather ecoclean car body...
TRANSCRIPT
www.durr.com
»» EcoClean F5 in production opera-tion from back to front: roof roller, slanted roller, vertical roller
» Car body cleaning with the slanted and the vertical roller
» Structure of an ostrich feather
EcoCleanCar Body ShellS-exterior Cleaning equipment
Function
EcoClean, for removal of dust from automobile body exterior surfaces
The ecoClean car body shell – External cleaning equipment is used to remove loose dust and dirt particles from the car bodies before the painting process. The car body is cleaned by rotating feather when they brush across the body shell with a depth of immersion of approx. 40 mm. Through this movement across the car body surface, the dust on the surface is absorbed by the feather rollers and transported to the collector inside the feather roller housing. With each rotational motion, the feathers are ionised and cleaned by the dust collector.
Structure
The cleaning system ecoClean F3 with three feather rollers, ecoClean F5 with five feather rollers»» Roof machine cleans the hood, roof, trunk cover, front and rear-end»» Two slanted rollers (F5 only) clean the area of the A-, B- and C-pillars»» Two vertical rollers clean the fenders, doors and rear sidewalls, while F3 complete lateral cleaning
»» Pre-and post-ionization at the inlet and outlet to neutralize the electrostatic charging of the car body
highlights
»» Cleaning of the car body shell»» Reproducible, high cleaning effect»» Up to 5 freely programmable feather rollers»» Pivoting movement of the roof roller for optimum cleaning of front and rear area
»» Integrated collision protection»» Pre-ionization / ionization for the neutrali-zation of the electrostatic charge before the cleaning
»» Post-ionizsation to avoid resoiling»» In combination with ecoBlow-Off, optimum cleaning of the car bodies inside and outside
»» Installation is integrated in the booth wall»» Ease of maintenance and effortless configuration
»» Small air consumption due to optimized air gaps
»» Identical mechanical design of the roof machines of ecoClean and ecoBlow-Off
»» Continuous control, visualisation and drive concept on ecopaint painting installations
teChniCal dataTechnical DaTa
www.durr-application-technology.com
Subj
ect t
o ch
ange
. The
info
rmat
ion
prov
ided
in th
is b
roch
ure
cont
ains
onl
y ge
nera
l des
crip
tions
or
perf
orm
ance
cha
ract
eris
tics
that
may
diff
er
in a
ctua
l cas
e. T
he re
spec
tive
char
acte
ristic
s sh
all o
nly
exis
t if e
xpre
ssly
agr
eed
in th
e co
ntra
ct. ©
Dür
r Sys
tem
s Gm
bH
options
» Pre-ionization to neutralize electrostatic charging station at the station intake
» For emergency and maintenance drive situations, the pneumatic drive will move the rotary drum to the upper end position
roof rolling stationZ axis (mm) 1,860 or 2,080 or 2,460
freely programmableB axis working stroke (x°) ± 80 freely programmableRoller speed (1 / min) 15 - 75 freely programmableHeight (mm) 3,730 or 4,180 or 4,530Width (mm) 1,460Depth (mm) 760Roller widths (mm) 1,800 / 2,000 / 2,200 / 2,400
Slanted rolling stationY axis (mm) 380 or 600 freely
programmableA axis working stroke (x°) 0 - 30 freely programmableRoller speed (1 / min) 15 - 75 freely programmableHeight (mm) 2,520 or 3,030Width (mm) 1,224Depth (mm) 1,275Max. roller height (mm) 850 or 1,400
Vertical roller stationY axis (mm) 380 or 600 freely
programmableRoller speed (1 / min) 15 - 75 freely programmableHeight (mm) 2,520 or 3,030Width (mm) 1,224Depth (mm) 1,275Max. roller height (mm) 850 or 1,400
power ratingAir consumption (m³ / h) 30,000Collector portion (m³ / h) 10,000Voltage supply (V) 400Power (kilowatt kW) 5.5
CapacityCar bodies per hour (type-dependent)
90
post-ionizer stationZ axis working stroke (mm) 1,300 or 2,100 freely
programmableY axis working stroke (mm) 300 manually adjustableA axis working stroke (x°) 30 manually adjustableHeight (mm) 2,490 or 3,290Width (mm) 510Depth (mm) 760
» Pivoting roof roller for optimum cleaning of front and rear
» Diagram EcoClean F5