edge and surface conditioning
TRANSCRIPT
cations, applications, and prices. The HPS LoPro valves are smaller than standard vacuum poppet valves, requiring less space on a system. Circle 315 on the reader service card
CPVC CORROSION-RESISTANT PLASTICS
Noveon Inc., Cleveland
An B-page brochure from Noveon Inc. features Corzan Industrial Systems. These CPVC compo- nents, including pipe, fittings, basket strainers and filters, duct- ing, pumps, and valves, can be used in a variety of ventilation and pollution control systems. Circle 316 on the reader service card
WASTEWATER MANAGEMENT PROGRAMS
ONDEO Nalco, Naperville, Ill.
Nalmet Metal Wastewater Man- agement Programs from ONDEO Nalco are described in a 2-page flyer. The programs are tailored to handle specific waste treat- ment challenges and provide su- perior results to remove chelated or complexed metals. Systems can include advanced feed automa- tion, elimination of drum or con- tainer costs, and Ultimer coagu- lants/flocculants. Circle 317 on the reader service card
EDGE AND SURFACE CONDITIONING
PEGCO Process Laboratories, Bartlett, N.H.
PEGCO Super-Hone processes are detailed in a l-page flyer.
COST EFFECTIVE MP&M WASTEWATER TREATMENT
USING PRECIPITATION AND CLARIFICATION
-. ProChemTech International, Inc.
Inclined plate clarification is the most efficient, low cost, and trouble free process known for removal of
many pollutants from industrial wastewaters. We build the best, advanced design inclined plate
clarifiers in the world, which, when combined with appropriate PCT chemistry, can meet the proposed MP&M standards without any
additional process steps.
OPEN FRONT BATCH POWDER
Smaller units available skidded and ready to operate. Full compliance warranty provided for systems.
We can retrofit MP&M chemistry to your system.
Phone 8 14-265-0959 FAX 814-265-1263
www.prochemtech.com For Your Nearest Distributor Call:
1-686-452-666~ All Model Specifications ON LINE At
www.coImetsb.com Circle 052 on reader card or go to www.thru.to/webconnect Circle 015 on reader card or go to www.thru.to/webconnect
They improve edge condition and surface and subsurface physical properties on carbide and HSS tooling. These processes simulta- neously develop compression/ hardening and very refined sur- face profiles on all tool surfaces
including the cutting edge, pri- mary and secondary flank relief, and flute radiuses. This harden- ing, compression, and alteration of the cutting edge surface and supporting structures contributes
to an improvement in mechanical strength and can avert premature wear or fracture of critical edges and surfaces. Circle 318 on the reader service card
May 2002 87