edt plus edt plus line - wordpress.com · t u b e a n d p r o fi l e b e n d e r s, a n d m e t a...
TRANSCRIPT
Tube and profile benders, and Metalworking machinery
EDT PLUS Line2015Up to Ø 76 mm
F1
F2
+
-
+
-
EDT PLUS
www.ercolina.com
MB42 EDTPLUSMax Capacity Stainless Steel: Ø 42 x 2 mmMax CLR: 260 mmART: MB42EDTP-MPRICE: € 4.150,00
TB050 EDTPLUSMax Capacity Stainless Steel: Ø 60 x 3 mmMax CLR: 300 mmART: TB050EDTP-MPRICE: € 7.900,00
SB48 EDTPLUSMax Capacity Stainless Steel: Ø 50 x 3 mmMax CLR: 300 mmART: SB48EDTP-MPRICE: € 5.900,00
MG030 EDTPLUSMax Capacity Stainless Steel: Ø 76 x 3 mmMax CLR: 380 mmART: MG030EDTP-MPRICE: € 9.900,00
TB60 EDTPLUSMax Capacity Stainless Steel: Ø 60 x 3 mmMax CLR: 380 mmART: TB60EDTP-MPRICE: € 8.400,00
Easy to program and excellent bending results
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability. Rev
Mkt
/11/
2015
/En
FEATURES
Easy programming4,3” displayMultilingual programProgrammable bend angle and spring back value Machine load indicator
www.ercolina.com
EDTPLUS CONTROL
NEW 2015
F1
F2
+
-
+
-
EDT PLUS
Machine load
Programmed bend angle
Programmed spring back angle
Signals
Actual angle
Machine statusMachine model
Language
Easy to programand excellent bending results
FEATURES
Standard steel tube capacity 76 x 3 mmPipe capacity 2”1/2 Sch. 10Square tube capacity 60 x 60 x 3 mmBending radii 10 ÷ 38 mmBend to CLR as small as 2DTouch screen programming withsystem diagnostics in multiple languagesQuick-change tooling systemDigital display of bend angle
Material spring back compensationAccurate counterbending die positioningFoot pedal control for hands-free operationAccepts Ercolina’s A40-P two axis positioningtable for multiple and sequential bendsMandrel upgrade availableTwo speeds and inverter models available
www.ercolina.com
Non Mandrel BendersMax capacity Stainless Steel 70 x 4 mm
MG030 EDTPLUSNEW
New 2015
User friendly EDT PLUSControl display!
Non Mandrel Benders > MegaBender MG030 EDTPLUS
MAXIMUM CAPACITY
(*Based on materials with T.S. 42Kg/mm2(psi 60.000)- Y.P. 25 Kg mm2 (psi 36.000) )
TECHNICAL DATA
Flection Modulus
Minimum Outside Diameter
Maximum Shaft Speed
Maximum Center Line Radius (CLR)
Minimum Center Line Radius (CLR)
Power
Voltage Requirement
Weight
Dimensions (LxHxW)
Material
15 cm3
10 mm - 1/8" Gas
1-2 rpm
380 mm
10 mm
3.5 kW
220 - 400 V 3Ph/50-60 Hz
193 Kgs
680 x 910 x 370 mm
2" 1/2 gas
76
76
70
70
76
76
76
76
73
50
60 x 60
40 x 40
60 x 60
50 x 20
4
3
3
5
4
1.6
4
6
6
4
4
3
NA
6
6
Max Ø (mm)
Max Thick.(mm)
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability.
Gas Tube
Standard steel tube
furniture tube
Hydraulic steel ST35
Stainless steel AISI 304
Stainless steel AISI 308
Soft Brass
Hard copper & Aluminum
Soft copper
Conduit tubes
Mepla, Geberit and similars
Square tube
Solid square
Mild steel T
Mild steel C channel
CML INTERNATIONAL S.p.A.Loc. Annunziata, snc 03030 PIEDIMONTE SAN GERMANO (FR) - ITALYTel. (+39) 0776 40281 Fax. (+39) 0776 404801 www.ercolina.com [email protected]
CML DEUTSCHLAND GmbHGrafenbergweg 11 73614 Schorndorf (D)Tel (+49) 07181 872 66Fax(+49) 07181 872 [email protected]
CML USA Inc3100 Research Parkway Davenport, Iowa 52806 (USA)Tel (+1) 563 391 7700Fax (+1) 563 391 [email protected]
CML KOREA102-87, Bucheon Technopark 3rd, 36-1 Samjeong-dong Ojeong-gu Bucheon, Gyeonggi-do (KOREA)Tel (+82) 32 624 1939Fax (+82) 32 624 [email protected]
Branch o�ces
ERCOLINA WORLDWIDE
by
Rev
Mkt
/03/
2014
/en
FEATURESwww.ercolina.com
Non Mandrel bendersMax capacity Stainless SteeI 60 x 3 mm
TB60 EDTPLUS
Mild steel tube capacity 60 x 3 mm2” Gas inches (4 mm) capacitySquare tube capacity 50 x 50 x 3 mmMaximum CLR 380 mmSimple control with programmable bend angle
Material spring back compensation with readoutQuick-change tooling systemSingle Bending SpeedAccepts Ercolina’s A40-P two axis positioning table for multiple and sequential bendsOptional foot pedal control allows hands-free operation
New 2015
NEW
User friendly EDT PLUSControl display!
CML INTERNATIONAL S.p.A.Loc. Annunziata, snc 03030 PIEDIMONTE SAN GERMANO (FR) - ITALYTel. (+39) 0776 40281 Fax. (+39) 0776 404801 www.ercolina.com [email protected]
CML DEUTSCHLAND GmbHGrafenbergweg 11 73614 Schorndorf (D)Tel (+49) 07181 872 66Fax(+49) 07181 872 [email protected]
CML USA Inc3100 Research Parkway Davenport, Iowa 52806 (USA)Tel (+1) 563 391 7700Fax (+1) 563 391 [email protected]
CML KOREA102-87, Bucheon Technopark 3rd, 36-1 Samjeong-dong Ojeong-gu Bucheon, Gyeonggi-do (KOREA)Tel (+82) 32 624 1939Fax (+82) 32 624 [email protected]
Branch o�ces
ERCOLINA WORLDWIDE
by
capacities based on materials with T.S. 42 Kg/mm2 (psi 60.000 Y.P. 25 Kg/mm2 (psi 36.000)
Rev
Mkt
/11/
2015
/en
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability.
Non Mandrel Benders > TopBender TB60 EDTPLUS
TECHNICAL DATAFlection Modulus
Minimum Outside Diameter
Maximum Shaft Speed
Maximum Center Line Radius (CLR)
Minimum Center Line Radius (CLR)
Power
Voltage Requirement
Weight
Dimensions (LxHxW)
10 cm3
10 mm - 1/8" Gas
Bend 1.5 rpm-Return 2.8 rpm
380 mm (optional accessory)
10 mm
2.2 kW
400 V 50Hz
186 Kgs
500 x 1000 x 760 mm
MAXIMUM CAPACITY
Material
2" gas
60
60
60
60
60
60
64
35
14 x 60
25 X 50
50 x 50
30 x 30
50 x 50
40 x 20
4
3
6
3
3
4
5
6
NA
NA
3
3
NA
6
6
Pipe
Round tube
Soft brass
INOX AISI 308
INOX AISI 304
Welded tube for furniture
ST35 hydraulic tube
Hard copper & Aluminum
Round solids
Rectangular solids
Rectangular tube
Square tube
Solid square
Mild steel T
Mild steel C channel
Max Ø (mm)
Max Thick.(mm)
FEATURES
Mild steel tube capacity 60 x 3 mm2” Gas inches (4 mm) capacitySquare tube capacity 50 x 50 x 3 mmMaximum CLR 300 mmBend to CLR as small as 2 x ØTouch screen control o�ers easy access to auto and manual operating modes, system diagnostics, multiple language capability and real time machine load display
Material spring back compensation with readoutQuick-change tooling systemSingle Bending SpeedAccepts Ercolina’s A40-P two axis positioning table for multiple and sequential bendsOptional foot pedal control allows hands-free operation
www.ercolina.com
Non Mandrel BendersMax capacity INOX AISI 304 60 x 3 mm
TB050EDT-PLUSNEW
User friendly EDT PLUSControl display!
New 2015
Non Mandrel Benders > TopBender TB050EDT-PLUS
CML INTERNATIONAL S.p.A.Loc. Annunziata, snc 03030 PIEDIMONTE SAN GERMANO (FR) - ITALYTel. (+39) 0776 40281 Fax. (+39) 0776 404801 www.ercolina.com [email protected]
CML DEUTSCHLAND GmbHGrafenbergweg 11 73614 Schorndorf (D)Tel (+49) 07181 872 66Fax(+49) 07181 872 [email protected]
CML USA Inc3100 Research Parkway Davenport, Iowa 52806 (USA)Tel (+1) 563 391 7700Fax (+1) 563 391 [email protected]
CML KOREA102-87, Bucheon Technopark 3rd, 36-1 Samjeong-dong Ojeong-gu Bucheon, Gyeonggi-do (KOREA)Tel (+82) 32 624 1939Fax (+82) 32 624 [email protected]
Branch o�ces
ERCOLINA WORLDWIDE
by
MAXIMUM CAPACITY
(*Based on materials with T.S. 42Kg/mm2(psi 60.000)- Y.P. 25 Kg mm2 (psi 36.000) )
TECHNICAL DATAFlection Modulus
Minimum Outside Diameter
Maximum Shaft Speed
Maximum Center Line Radius (CLR)
Minimum Center Line Radius (CLR)
Power
Voltage Requirement
Weight
Dimensions (LxHxW)
7,5 cm3
10 mm - 1/8" Gas
1.3rpm/2,3 rpm (return)
300 mm (optional accessory)
10 mm
2.2 kW
110 - 230 V 1PH/50-60Hz
130 Kgs
363 x 900 x 595 mm
Material
2" gas
60
60
60
60
60
64
64
35
10 x 60
25 X 50
50 x 50
30 x 30
50 x 50
40 x 20
4
3
4
3
3
4
4
4
NA
NA
3
3
NA
6
6
Pipe
Round tube
Soft brass
INOX AISI 308
INOX AISI 304
Welded tube for furniture
ST35 hydraulic tube
Hard copper & Aluminum
Round solids
Rectangular solids
Rectangular tube
Square tube
Solid square
Mild steel T
Mild steel C channel
Rev
Mkt
/11/
2015
/en
Max Ø (mm)
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability.
Max Thick.(mm)
FEATURES
EDT PLUS ControlSingle phase inverterMild steel tube capacity 48 x 3,5 mm1 1/2” x 3,68Gas inches capacitySquare tube capacity 40 x 40 x 3 mmMaximum CLR 300 mmTouch screen control o�ers easy access to auto and manual operating modes, system diagnostics, multiple language capability and real time machine load display
Single bending speedStandard voltage 220V/1 Ph . Other voltages upon request3 Ph supply upon requestPatented quick-change tooling system with multiple radii available
www.ercolina.com
Non Mandrel BendersMax capacity Stainless Steel 50 x 3 mm
SB48 EDT PLUSNEW
New 2015
User friendly EDT PLUSControl display!
Non Mandrel Benders > Superbender SB48
CML INTERNATIONAL S.p.A.Loc. Annunziata, snc 03030 PIEDIMONTE SAN GERMANO (FR) - ITALYTel. (+39) 0776 40281 Fax. (+39) 0776 404801 www.ercolina.com [email protected]
CML DEUTSCHLAND GmbHGrafenbergweg 11 73614 Schorndorf (D)Tel (+49) 07181 872 66Fax(+49) 07181 872 [email protected]
CML USA Inc3100 Research Parkway Davenport, Iowa 52806 (USA)Tel (+1) 563 391 7700Fax (+1) 563 391 [email protected]
CML KOREA102-87, Bucheon Technopark 3rd, 36-1 Samjeong-dong Ojeong-gu Bucheon, Gyeonggi-do (KOREA)Tel (+82) 32 624 1939Fax (+82) 32 624 [email protected]
Branch o�ces
ERCOLINA WORLDWIDE
by
MAXIMUM CAPACITY
(*Based on materials with T.S. 42Kg/mm2(psi 60.000)- Y.P. 25 Kg mm2 (psi 36.000) )
TECHNICAL DATA
Flection Modulus
Minimum Outside Diameter
Maximum Shaft Speed
Maximum Center Line Radius (CLR)
Minimum Center Line Radius (CLR)
Power
Voltage Requirement
Weight
Dimensions (LxHxW)
5,7 cm3
10 mm - 1/8" Gas
Bend 1rpm- return 2 rpm
300 mm
10 mm
0.75 kW
Single Phase110/230 V
110 Kgs
410 x 100 x 570 mm
Material
Pipe
Round Tube
Furniture Tube
Hydraulic Steel ST35
Stainless Steel AISI 304
Stainless Steel AISI 308 (food ind.)
Soft Brass
Hard copper & Aluminum
Soft copper
Conduit Tube
Mepla,Geberit and similars
Mild steel (EN: S275JO)
Mild steel (EN: S275JO)
Mild steel (EN: S275JO)
Mild steel (EN: S275JO)
Mild steel (EN: S275JO)
Mild steel (EN: S275JO)
Mild steel (EN: S275JO)
Rev
Mkt
/11/
2015
/en
Max Ø (mm)
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability.
Max Thick.(mm)
1-1/2" Gas
48
54
50
50
48
60
64
64
60
50
32
8x48
20x40
40x40
30x30
40 x 40
32 x 16
3,68
3,5
1,5
4
3
2,5
3
2
2
2
4
na
na
3
3
na
5
5
FEATURES
Mild steel tube capacity 42 x 3 mm1 1/4” Gas inches (3.5 mm) capacitySquare tube capacity 35 x 35 x 3 mmMaximum CLR 260 mmBend to CLR as small as 2 x ØTouch screen control o�ers easy access to auto and manual operating modes, system diagnostics, multiple language capability and real time machine load display
Patented quick-change tooling system with multiple radii availableAccepts Ercolina’s A40-P two axis positioning table for multiple and sequential bendsSingle Bending SpeedOverload System ControlFoot switch controlSingle and three phase models available
www.ercolina.com
Non Mandrel BendersMax capacity Stainless Steel 42 x 3 mm
MB42EDTPLUS
New 2015
NEW
User friendly EDT PLUSControl display!
Non Mandrel Benders > MediBender MB42EDTPLUS
CML INTERNATIONAL S.p.A.Loc. Annunziata, snc 03030 PIEDIMONTE SAN GERMANO (FR) - ITALYTel. (+39) 0776 40281 Fax. (+39) 0776 404801 www.ercolina.com [email protected]
CML DEUTSCHLAND GmbHGrafenbergweg 11 73614 Schorndorf (D)Tel (+49) 07181 872 66Fax(+49) 07181 872 [email protected]
CML USA Inc3100 Research Parkway Davenport, Iowa 52806 (USA)Tel (+1) 563 391 7700Fax (+1) 563 391 [email protected]
CML KOREA102-87, Bucheon Technopark 3rd, 36-1 Samjeong-dong Ojeong-gu Bucheon, Gyeonggi-do (KOREA)Tel (+82) 32 624 1939Fax (+82) 32 624 [email protected]
Branch o�ces
ERCOLINA WORLDWIDE
by
MAXIMUM CAPACITY
(*Based on materials with T.S. 42Kg/mm2(psi 60.000)- Y.P. 25 Kg mm2 (psi 36.000) )
TECHNICAL DATA
Flection Modulus
Minimum Outside Diameter
Maximum Shaft Speed
Maximum Center Line Radius (CLR)
Minimum Center Line Radius (CLR)
Power
Voltage Requirement
Weight
Dimensions (LxHxW)
4,1 cm3
10 mm - 1/8" Gas
Bend 1.3 rpm-Return 3.4rpm
260 mm
10 mm
0.75 kW
Single phase 110/230V
130 Kgs
363 x 900 x 595 mm
Material
Pipe
Round tube
Soft brass
Stainless steel
Welded tube for furniture
ST35 hydraulic tube
304L stainless tube
Hard copper & Aluminum
Round solids
Rectangular solids
Rectangular tube
Square tube
Solid square
Mild steel T
Mild steel C channel
1-1/4"
42
50
42
48
42
42
54
30
7 x 42
35x18
35x35
25x25
35x35
28x15
3,5
3
3
2,5
1,5
4
3
2
na
na
na
3
na
5
5
Rev
Mkt
/11/
2015
/en
Max Ø (mm)
Max Thick.(mm)
CML INTERNATIONAL S.p.A. reserves the right to make changes at any time without notice to price, color, material, equipment, speci�cations, models, machines operation, tooling requirements and availability.