egant power splitters_power tappers

Power Splitters, Broadband376 - 2200 MHzTETRA, NMT, GSM900, GSM1800, UMTS

Splits signals in 2, 3 or 4 ways

The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs.When building an indoor coverage system the splitter is often used to split signals between fl oors and antennas. The functionality of han-dling both transmitting and receiving signals in the same path is highly benefi cial since the TX signal is split and the RX signal is com-bined in the same stage and component.

TETRA, 376 - 2200 MHz

The 2-way, 3-way and 4-way power split-ters are individually designed to be used with TETRA, NMT, GSM900, GSM1800 and UMTS.

Design highlights:

· Low insertion loss· Low intermodulation· Easy installation· No active components (robust design)

RBSRBS

Floor 1

Floor 2

EGANTCELLULAR COMPONENTS

Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 62 00 650Fax: +46 (0)70 386 53 53E-mail: [email protected]

RevC

Technical Specifi cations for Power SplittersBelow are some typical data. For more detailed information, please contact us.

Electrical Specifi cationsProduct number:Passband:Input return loss:376 - 2200 MHz

Split loss:Dissipative loss:376 - 2200 MHzMax input power/port:

3rd order intermodulation:IM3, 2 x 43 dBm:Impedance in/out:

EG 500 80322-Way Splitter 376 - 2200 MHz> 18 dB, typ 24 dB

< 3.0 dB

< 0.05 dB700 W avg.3 kW peak

< - 117 dBm,160 dBc50 Ohm


< 4.7 dB


< - 117 dBm,160 dBc50 Ohm


< 6.0 dB


< - 117 dBm,160 dBc50 Ohm

Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:

253 x 38 x 80 mm7/16 (f)1.12 kg

271 x 38 x 80 mm7/16 (f)1.20 kg

271 x 80 x 80 mm7/16 (f)1.20 kg

Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:Installation support:

-35 to +70ºCRelative 5 - 100%IP68EG 300 0306Bracket, stainless steel



Electrical Specifi cationsProduct number:

Passband: Input return loss:Split loss:Dissipative loss:Max input power/port:


EG 500 80422-Way Splitter376 - 2200 MHz> 18 dB, typ 24 dB< 3.0 dB< 0.05 dB700 W avg.3 kW peak

< - 117 dBm, 160 dBc50 Ohm

EG 500 80433-Way Splitter 376 - 2200 MHz> 18 dB, typ 24 dB< 4.7 dB< 0.05 dB700 W avg.3 kW peak

< - 117 dBm,160 dBc50 Ohm

EG 500 80444-Way Splitter 376 - 2200 MHz> 18 dB, typ 24 dB< 6.0 dB< 0.05 dB700 W avg.3 kW peak

< - 117 dBm,160 dBc50 Ohm

Mechanical Specifi cations Dimensions (W x H x D):Connectors:Weight:

276 x 26 x 45 mmN (f)0.45 kg

276 x 26 x 64 mmN (f)0.50 kg

276 x 26 x 64 mmN (f)0.55 kg

Environmental Specifi cations Temp. range (normal operation): Humidity: Sealing:

Installation support:

Egant reserves the right to change this product specifi cation

at any time without notice.

-35 to +70ºCRelative 5 - 100%IP65EG 699 0005Bracket, aluminum



Power Splitters, Broadband376 - 2700 MHzTETRA, NMT, GSM900, GSM1800, UMTS and LTE



Superior bandwidth, 376 - 2700 MHz

All Egant power splitters are individually de-signed to be as future proof as possible. They are extremely broad banded to accomodate for tomorrow’s cellular systems, thus mini-mizing the need to replace older components when adding new services into a system.

Design Highlights:


RBSRBS

Floor 1

Floor 2


Installation bracket

Use fl exible stainless steel mounting bracket EG 300 0306 for Power Splitter with DIN connectors or the EG 699 0005 bracket for N version.


RevC


Electrical Specifi cationsProduct number:Passband:Input return loss:376-500MHz500-600MHz600-2700MHz

Coupling:Insertion loss 376-2700MHz:

Max input power/port:3rd order intermodulation:IM3, 2 x 43 dBm:Impedance in/out:

2-Way Power SplitterEG 605 0019376 - 2700 MHz

> 13,8 dB> 17 dB> 18 dB, typ 23 dB

< 3.0 dB< 0.2 dB

500 W avg.3 kW peak< - 117 dBm,160 dBc50 Ohm


> 13,8 dB> 17 dB> 18 dB, typ 23 dB

< 3.0 dB< 0.2 dB

500 W avg.3 kW peak< - 117 dBm,160 dBc50 Ohm


255 x 62 x 38 mm7/16 (f)1.12 kg

265x 54 x 26 mmN (f)0.45 kg




Electrical Specifi cationsProduct number:Passband: Input return loss:376-2600MHz2600-2700MHz

Coupling:376-2600MHz2600-2700MHz

Insertion loss 376-2700MHz:

Max input power/port:



> 18 dB, typ 23dB> 16,5 dB, typ 18dB

< 4,8 dB< 5.0 dB

< 0.2 dB

500 W avg.3 kW peak

< - 117 dBm, 160 dBc50 Ohm


> 18 dB, typ 23dB> 16,5 dB, typ 18dB

< 6.0 dB< 7.0 dB

< 0.2 dB

500 W avg.3 kW peak

< - 117 dBm, 160 dBc50 Ohm


305 x 80 x 30 mm7/16 (f)0.9 kg

305 x 80 x 55 mm7/16 (f)1.1 kg

Environmental Specifi cations Temp. range (normal operation): Humidity:



-35 to +70ºCRelative 5 - 100%IP67


Power Splitters, Broadband150- 2200 MHz

Splits signals in 2,-ways

The 2-way splitters is designed to equally split one input signal into 2outputs.

When building an indoor coverage system the splitter is often used to diverge signals be-tween fl oors and antennas. The functionality of handling transmitting and receiving signals in the same path is highly benefi cial as the TX signal is split up and the RX signal is com-bined in the same stage and component.

High bandwidth, 150 - 2200 MHz


Design Highlights:


RBSRBS

Floor 1

Floor 2

Floor 3



RevB

Technical Specifi cations for Power Splitters 150 - 2200 MHzBelow are some typical data. For more detailed information, please contact us.

Electrical Specifi cationsProduct number:Passband:

Input return loss:150-376MHz376-2200MHz

Split loss:

Dissipative loss 150-376MHz:Dissipative loss 376-2200MHz:


3rd order intermodulation:IM3, 2 x 43 dBm:

Impedance in/out:


> 10,8 dB> 18 dB

< 3.0 dB

< 0.35 dB< 0.4 dB

500 W avg.3 kW peak

< - 117 dBm, 160 dBc

50 Ohm


> 10,8 dB> 18 dB

< 3.0 dB

< 0.35 dB< 0.4 dB

500 W avg.3 kW peak

< - 117 dBm, 160 dBc

50 Ohm


260 x 58 x 26 mmN (f)0.45 kg

253 x 38 x 80 mm7/16 (f)1,2 kg

Egant reserves the right to change this product specification at any time without notice.

Power Splitters, Broadband700 - 2700 MHzGSM900, GSM1800, UMTS, W-LAN


The 2-way, 3-way and 4-way power splitters are designed to equally split one input signal into 2, 3 or 4 outputs.

When building an indoor coverage system the splitter is often used to diverge signals be-tween fl oors and antennas. The functionality of handling transmitting and receiving signals in the same path is highly benefi cial as the TX signal is split up and the RX signal is com-bined in the same stage and component.

High bandwidth, 700 - 2700 MHz


Design Highlights:


RBSRBS

Floor 1

Floor 2

Floor 3



RevC

Technical Specifi cations for Power Splitters 700 - 2700 MHzBelow are some typical data. For more detailed information, please contact us.


Input return loss:Split loss:Dissipative loss < 2 GHz:Dissipative loss > 2 GHz:Max input power/port:


Impedance in/out:


> 18 dB, typ 23 dB< 3.0 dB< 0.15 dB< 0.25 dB500 W avg.3 kW peak

< - 117 dBm, 160 dBc

50 Ohm



< - 117 dBm, 160 dBc

50 Ohm



< - 117 dBm, 160 dBc

50 Ohm


276 x 26 x 45 mm7/16 (f)1.12 kg

276 x 26 x 64 mm7/16 (f)1.20 kg

276 x 26 x 64 mm7/16 (f)1.20 kg

Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:

-35 to +70º CRelative 5 - 100%IP68



Installation support: EG 300 0306 EG 300 0306 EG 300 0306Material: Bracket, stainless steel Bracket, stainless steel Bracket, stainless steel


Input return loss:Split loss:Dissipative loss < 2 GHz:Dissipative loss >2 GHz:Max input power/port:


Impedance in/out:



< - 117 dBm, 160 dBc

50 Ohm



< - 117 dBm, 160 dBc

50 Ohm



< - 117 dBm, 160 dBc

50 Ohm


276 x 26 x 45 mmN (f)0.55 kg

276 x 26 x 64 mmN (f)0.55 kg

276 x 26 x 64 mmN (f)0.55 kg





Installation support: EG 699 0005 EG 699 0005 EG 699 0005Material: Bracket, Aluminum Zinc Bracket, Aluminum Zinc Bracket, Aluminum Zinc

Egant reserves the right to change this product specification at any time without notice.

Power Splitters, Broadband800 - 2500 MHzGSM900, CDMA, GSM1800, UMTS



TETRA, 800 - 2500 MHz

The 2-way, 3-way and 4-way power splitters are individually designed to be used with-GSM900, CDMA, GSM1800 and UMTS.

Design highlights:

· Low insertion loss· Easy installation· No active components (robust design)



RevB


Electrical Specifi cationsProduct number:Passband:Input return loss:800 - 2500 MHz

Split loss:Dissipative loss:Max input power/port:


EG 605 00102-Way Splitter 800 - 2500 MHz> 20 dB

< 3.0 dB< 0.1 dB300 W avg.

-130 dBc50 Ohm


< 4.8 dB< 0.1 dB300 W avg.

-130 dBc50 Ohm


< 6.0 dB< 0.1 dB300 W avg.

-130 dBc50 Ohm


210 x 25 x 61 mmN (f)0.4 kg

236 x 25 x 61 mmN (f)0.45 kg

236 x 43 x 61 mmN (f)0.5 kg






Passband: Input return loss:Split loss:Dissipative loss:Max input power/port:


EG 605 00132-Way Splitter800 - 2500 MHz> 19 dB< 3.0 dB< 0.3 dB50 W avg.

-110 dBc50 Ohm

EG 605 00143-Way Splitter 800 - 2500 MHz> 19 dB< 4.8 dB< 0.4 dB50 W avg.

-110 dBc50 Ohm

EG 605 00154-Way Splitter 800 - 2500 MHz> 19 dB< 6.0 dB< 0.5 dB50 W avg.

-110 dBc50 Ohm


110 x 22 x 70 mmN (f)0.3 kg

130 x 22 x 100 mmN (f)0.40 kg

130 x 22 x 130 mmN (f)0.6 kg




-35 to +70ºCRelative 5 - 100%Indoor



Power Tappers 376 - 2700 MHzTETRA, GSM900, GSM1800, UMTS, W-LAN

Low loss design

The Egant Power Tapper is designed to tap off a portion of the signal in one direction while allowing the rest of the signal to pass through with a minimum of loss.

A power tapper is often used to tap off signals to antennas when building indoor or tunnel networks. The Egant Power Tapper comes in seven degrees of tapping, making it easy to choose the one that taps off the desired amount of power to the antenna.

Superior bandwidth, 376 - 2700 MHz

The extremely broadbanded Egant Power Tapper is designed with ease of installation in mind. Its robust mechanical shape allows for simple attachment to a wall using clips or straps.

Installation brackets

Use the fl exible stainless steel mounting bracket EG 300 0306 for tappers with DIN connectors, or the EG 699 0005 bracket for N versions.

6dB / 25%6dB / 25%7dB / 20%7dB / 20%10dB / 10%10dB / 10%13dB / 5%13dB / 5%15dB / 3%15dB / 3%20dB / 1%20dB / 1%

RBSRBS

75%75%80%80%90%90%95%95%97%97%99%99%

6dB / 25%6dB / 25%7dB / 20%7dB / 20%10dB / 10%10dB / 10%13dB / 5%13dB / 5%15dB / 3%15dB / 3%20dB / 1%20dB / 1%

RBSRBS

75%75%80%80%90%90%95%95%97%97%99%99%



RevC

Technical Specifi cations for Egant Power TappersBelow are some typical data. For more detailed information, please contact us.

Electrical and Mechanical Specifi cations

Frequency Band: 376 - 1000 MHz & 1710 - 2700 MHz

Input return loss:Max input power:Impedance in/out:Dimensions (W x H x D):Installation support:3rd order intermodulation:IM3, 2 x 43 dBm:

> 17.5 dB500 W avg. / 3 kW peak50 Ohm145 x 60 x 40 mmBrackets: EG 300 0306 (7/16), EG 699 0005 (N)

< - 117 dBm / 160 dBc

Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing: N (f)Sealing: 7/16 (f)

-35 to +70º CRelative 5 - 100%IP65IP68

Product number:

Coupling:Insertion loss:Connectors:

EG 500 7404

-4.8 dB0.05 dB7/16 (f)

EG 500 7406

-6.0 dB0.05 dB7/16 (f)

EG 500 7407

-7.0 dB0.05 dB7/16 (f)

EG 500 7408

-8.0 dB0.05 dB7/16 (f)

EG 500 7409

-9.0 dB0.05 dB7/16 (f)

EG 500 7410

-10 dB0.05 dB7/16 (f)

EG 500 7413

-13 dB0.05 dB7/16 (f)

Product number:


EG 500 7415

-15 dB0.05 dB7/16 (f)

EG 500 7420

-20 dB0.05 dB7/16 (f)

EG 500 7430

-30 dB0.05 dB7/16 (f)

Product number:


EG 500 7504

-4.8 dB0.05 dBN (f)

EG 500 7506

-6.0 dB0.05 dBN (f)

EG 500 7507

-7.0 dB0.05 dBN (f)

EG 500 7508

-8.0 dB0.05 dBN (f)

EG 500 7509

-9.0 dB0.05 dBN (f)

EG 500 7510

-10 dB0.05 dBN (f)

EG 500 7511

-11 dB0.05 dBN (f)

Product number:


EG 500 7512

-12 dB0.05 dBN (f)

EG 500 7513

-13 dB0.05 dBN (f)

EG 500 7514

-14 dB0.05 dBN (f)

EG 500 7515

-15 dB0.05 dBN (f)

EG 500 7520

-20 dB0.05 dBN (f)

EG 500 7530

-30 dB0.05 dBN (f)

Stop 2 700.000 MH zStart 380.000 MH z Stop 2 700.000 MH zStart 380.000 MH z

2:S21 Fwd Trans Log Mag 5.0 dB/ R ef 0.00 dB C

1

2

12

3

4 56

7

8

Meas 1:Mkr7 2170.000 MH z -23.055dB

1 2 3 4 56

7

8

Meas 2:Mkr7 2170.000 MH z -13.307dB

1:S11 R efl Port1 Log Mag 5.0 dB/ R ef 0.00 dB C

-40

-35

-30

-25

-20

-15

-10

-5

dB

Egant reserves the right to change this product specifi cation at any time without notice.

Brackets for Power Splitters, Power Tappers, Combiners and Couplers

Adjustable brackets, optimized for tun-nels and harsh environments

To simplify installation our brackets are multi-adjustable and made with ease of installation in mind.

Save money

Our brackets are optimized for Power Tap-pers, Power Splitters, Combiners and Cou-plers. When opting for quick and easy in-stallation, make sure to use our tailor made stainless steel or aluzinc brackets.



RevC

Technical Specifi cations - BracketsBelow are some typical data. For more detailed information, please contact us.

Product number: EG 300 0306 EG 300 0307 EG 699 0005

Mechanical Specifi cationsDimensions (W x H x D):Weight:Material:

30 x 77 x 80 mm0.2 kgStainless steel A4

30 x 77 x 80 mm0.2 kgAluzinc


Product number: EG 699 0006 EG 699 0007

Mechanical Specifi cationsDimensions (W x H x D):Weight: Material:



EG 699 0006Bracket for Egant combiners

EG 699 0007Bracket for Egant cellular couplers

EG 699 0005Bracket for Egant splitters/tappers (N)

EG 300 0306, EG 300 0307Bracket for Egant splitters/tappers (7/16)


Power Splitters, Broadband376 - 2500 MHzTETRA, NMT, GSM900, GSM1800, UMTS, W-LAN



TETRA-WLAN, 376 - 2500 MHz

The 2-way, 3-way and 4-way power split-ters are individually designed to be used with TETRA, NMT, GSM900, GSM1800, UMTS and W-LAN.

Design highlights:


RBSRBS

Floor 1

Floor 2


Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone:+46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]

RevC



Passband:

Split loss:Dissipative loss:



EG 605 00012-Way Splitter

376 - 2500 MHz

> 18 dB, typ 23 dB< 3.0 dB

< 0.05 dB

700 W avg. 3 kW peak

< - 117 dBm,160 dBc50 Ohm


376 - 2500 MHz

> 18 dB, typ 23 dB< 4.7 dB

< 0.05 dB


< - 117 dBm,160 dBc50 Ohm


376 - 2500 MHz

> 18 dB, typ 23 dB< 6.0 dB

< 0.05 dB


< - 117 dBm,160 dBc50 Ohm


276 x 26 x 45 mmN (f)0.45 kg

276 x 26 x 45 mmN (f)0.50 kg

276 x 26 x 45 mmN (f)0.55 kg


-35 to +70º CRelative 5 - 100%IP65EG 699 0005Bracket, aluzinc




Passband:

Input return loss:Split loss:Dissipative loss:376 - 800 MHz:800 - 2500 MHz:



EG 500 80302-Way Splitter376 - 2500 MHz

> 18 dB, typ 23 dB< 3.0 dB

< 0.2 dB< 0.1 dB


< - 117 dBm ,160 dBc50 Ohm


276 x 26 x 45 mm7/16 (f)1,12 kg


Installation support:

-35 to +70º CRelative 5 - 100%IP68EG 300 0306Bracket, stainless steel


egant power splitters_power tappers

Documents