el series: model key
TRANSCRIPT
EL/PEL Series:
How to Order
MODEL KEY
060 040\060\080\120\140
160\200
EL/PEL
CYCLONE 48www.e-motionamerica.com
Series:ELHigh Precision High Speed Gearboxes
Series:PELHigh Precision High Speed Gearboxes
L2: 09\12\15\16\18 20\24\25\30\32\36\40 48\64L3: 60\64\72\75\80\90 100\120\144\150\160 180\200\240\256\288 320\384\512\600\800
Ultra Precision: P0Precision: P1Standard: P2
Motor Manufacture and Model
MOTOR
EL PELMODEL
SIZE
RATIO 32 L2: 03\04\05\06\08\10
P2BACKLASH
Z2OUTPUTTYPE
Axis: Z1 Single Key Shaft: Z2 Spline Shaft: Z3 Light Hole: K1 Single Key Hole: K2 Spline Hole: K3 Customized: T
MOTORTYPE
RATIO 3:1-10000:1
OUTPUT TORQUE UP to 1800Nm
BACKLASH UP to 3arc min
AVAILABLE SIZES 40-200
RATIO 3:1-1000:1
OUTPUT TORQUE UP to 1800Nm
BACKLASH UP to 5arc min
AVAILABLE SIZES 40-200
HOW TO ORDER1. Select dimensions and ratio2. Select Model3. Select Motor and Installation Type
E-MOTION Cyclone Motion Control Motor & Drives & Gearhead
Order Instruction
EL/PEL Series
Performance Specifications
EL/PEL
CYCLONE 49
EL050 EL140 EL160EL090 EL120EL040 EL200EL060 EL070 EL080
E
EL050 EL140 EL160EL090 EL120EL040 EL200EL060 EL070 EL080EN070EN070 EL050 EL140 EL160EL090 EL120 EL200EL060 EL070 EL080PEL050 PEL140 PEL160PEL090 PEL120PEL040 PEL200PEL060 PEL070 PEL080
EL040
Technical Parameters
Performance Parameters
SIZE L RATIO
RA
TED
OU
TPU
T TO
RQ
UE
1. RATIO (i=Nin / Nout) 2. Output speed at 100 rpm, apply on the center of output shaft.3. Maximum acceleration torque T2B = 60% of T2NOT *Use life is 10,000 hours under continuous operation.
E-MOTION Cyclone Motion Control Motor & Drives & Gearhead
www.e-motionamerica.com
EL/PEL Series
Performance Specifications
EL/PEL
CYCLONE 50
EL050 EL140 EL160EL090 EL120EL040EL200EL060 EL070 EL080EN070EN070 EL050 EL140 EL160EL090 EL120 EL200EL060 EL070 EL080
PEL050 PEL140 PEL160PEL090 PEL120PEL040 PEL200PEL060 PEL070 PEL080EL040
PEL200L EL050 EL140 EL160EL090 EL120 EL200EL060 EL070 EL080
PEL050 PEL140 PEL160PEL090 PEL120PEL040 PEL060 PEL070 PEL080
Technical Parameters
www.e-motionamerica.com
Performance Parameters
SIZE
L1 L2 L3
Max Output TorqueEmergency Stop
Max Radial Force
Noice
Avg. Use Life
Full load efficiency
Output Torque
Max Axial Force
Torsional Rigidity
Max Input Speed
Rated Input Speed
Moment of Inertia
BA
CK
LASH
WEI
GH
T
EL040RATIOSIZE
Mom
ent
of In
erti
a
1. RATIO (i=Nin / Nout) 2. Output speed at 100 rpm, apply on the center of output shaft.3. Maximum acceleration torque T2B = 60% of T2NOT *Use life is 10,000 hours under continuous operation.
E-MOTION Cyclone Motion Control Motor & Drives & Gearhead
K1 K2 K3
Z1 Z2 Z3
EL40-EL200 O-P2 Axial Connection Installation Dimensions
CYCLONE 51
EL/PEL Series
Performance Specifications
EL/PEL
SIZE EL050
1/2/3EL140
1/2/3EL160
1/2/3
EL090
1/2/3EL120
1/2/3
EL200
1/2/3
EL060
1/2/3
EL070
1/2/3
EL080
1/2/3
EL040
1/2/3
Motor input dimensions A2/B2/H2/D11/D21/D31/D51/L31/L51/L61 customized to motor sizes.
www.e-motionamerica.comE-MOTION Cyclone Motion Control Motor & Drives & Gearhead
Installation Dimensions
AxisRealAxis Single-Key
Shaft
CustomizedZtSpline-Key
Shaft
Locking Ring Input PL40-160 Standard
Keyway Type InputCustomizedOutput
HoleAxis
Output type may be customized.
LightHole
Single-KeyShaft
Spline-KeyShaft
CustomizedZt
[Unit: mm]
(1) The parameters are related to the motor models. The dimensions may vary.(2) The parameters are related to the internal structure of the gearbox. The dimensions may vary.
Out
put
Ter
min
al D
imen
sion
s
CYCLONE 52
EL/PEL Series
Performance Specifications
EL/PEL
K1 K2 K3
Z1 Z2 Z3
PEL40-PEL200-OP2 Axial Connection Installation Dimensions
EL/PEL Series
Performance Specifications
EL/PEL
SIZE PEL050
1/2/3PEL140
1/2/3PEL160
1/2/3
PEL090
1/2/3PEL120
1/2/3
PEL200
1/2/3
PEL060
1/2/3
PEL070
1/2/3
PEL080
1/2/3
PEL040
1/2/3
Motor input dimensions A2/B2/H2/D11/D21/D31/D51/L31/L51/L61 Customized to motor sizes.
www.e-motionamerica.comE-MOTION Cyclone Motion Control Motor & Drives & Gearhead
Installation Dimensions
Axis
RealAxis
CustomizedZtSpline-Key
ShaftSingle-Key
Shaft
Keyway Type InputCustomized
Locking Ring Input WPL40-160 StandardOutput
Hole Axis Single-Key
ShaftSpline-Key
ShaftLightHole
Output type may be customized.
CustomizedZt
[Unit: mm]
(1) The parameters are related to the motor models. The dimensions may vary.(2) The parameters are related to the internal structure of the gearbox. The dimensions may vary.
Out
put
Ter
min
al D
imen
sion
s